Used Feintool Fine Blanking Press for sale (14,402)

Condition: good (used), Used machine, good condition. Delivery time appr. 7-8 weeks after ordering *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Gedpfxofmqq Ej Ahtobr Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 press brake (2021) Manufacturer: Amada Type: HFE M2 5012 press brake Condition: used, in production and operational Year of manufacture: 10/2020 Operating hours: 6830 hours Working hours: 417 hours (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without punch holder (mm): 480 Gbsdpfoztyw Hox Ahtor Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600 Video available.

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Gbedev Tp D Hjpfx Ahtjr Weight 1250 kg Good condition

Condition: used, machine/vehicle number: 008695, Max working length: 2500 mm Max working width: 1300 mm Gjdpfx Ajztkbpohtebr Pressure Exerted: 2 Kg/cm2 No of Pressing cylinders: 4

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 Gbjdpfx Ahoztvwiotjr - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R 2 units available Container for skip loader trucks 20 cubic meter usable volume Gedpfx Ajzt Nirshtobr Technically refurbished Repainted in desired RAL color Side hook connection Discharge door hinged at the top

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes Gjdpfxjzr Inwj Ahtobr - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2012, condition: excellent (used), functionality: fully functional, controller model: Simatic Mobile Panel 277 10", number of cylinders: 4, lifting height: 1,500 mm, pressing force: 250 t, operating pressure: 245 bar, main lifting speed: 290 mm/min, pressing speed: 400 mm/s, control type: PLC-controlled, Equipment: 3rd hydraulic function, hydraulics, Here you have the unique opportunity to acquire a thermoforming press from the premium manufacturer FRIMO. The press is in used, very good condition, has no outstanding maintenance requirements, and is available immediately. The press can also be modified and adapted to meet new requirements according to customer specifications. Please feel free to contact us regarding your planned project, and we will prepare a customized offer for you. Gsdpfxoztm Ufj Ahtjbr The press is currently located in Sontra (Germany) and can be inspected by arrangement. The press is currently partially disassembled (platform, hydraulics, attachments, etc.) and can be completely reassembled if required. The press was last used in a multi-stage production line; the other equipment is also largely still available. The image (overview) shows everything schematically; this advertisement primarily concerns the 250t thermoforming press. If we have piqued your interest, please do not hesitate to contact us at any time.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment for waste collection and sorting. Previously used on a binding line in the graphic arts industry to collect paper-cutting waste and dust! The system collects waste via a network of pipes using suction power, separates out the dust, and automatically compacts the waste into containers using a hydraulic compactor. Gjdpezd Ak Dofx Ahtjbr The system consists of the following units: BTR Enviromental, model C48H K11, serial 666838, year 1999 cyklon unit Delta NEU, model AMSP as dustseparator Europress, model ES 4, year 2002 hydraulic container-compacting uniter Europress containers K 27 m³, (599 x 235 x 253 cm) as well as the support racks, structures, and walkways shown in the pictures that are part of the equipment Dismantling, packing and loading on trailer in including in price! Incoterms FOT

Condition: good (used), Year of construction: 2006, functionality: fully functional, Press force: 50 t Bending length: 1275 mm Frame width: 1040 mm Stroke: 215 mm Usable installation height: 385 mm Overhang: 420 mm Standard equipment: - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC back gauge with rack and pinion drive for the X and R axes - Safe shifting of the gauge fingers from the front - Upper tool clamping system "New Standard Clamping II" manual - Lower tool holder for EV dies, clamping hydraulic, shifting programmable (2 positions) - Control system TRUMPF TASC 6000 - Safety device consisting of side and rear protective doors - Control cabinet air conditioning - Network compatible Optional equipment: - 2 additional gauge fingers, attachable - Upper tool clamping hydraulic Gjdpfx Ajzt R Hrehtsbr - Bendguard - Roll protection cover at the rear - Support console - Preparation for ACB

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 170 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 445 mm Accessories: - 2 front support arms - Light curtain in front of the machine - Foot switch - Wila quick-release system at the top and bottom - TASC 6000 control system - Die shifting mechanism - Including tools - Crowning Gjdpjzt R Euefx Ahtobr - 6-axis back gauge

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: -CNC control Cybelec DNC 880 S -2 support arms -Foot switch -Side protective doors -Laser safety system -Tool holder EHT -Pneumatic die shifting system Gbsdpfx Ahezt R D Dotor -Crowning -Controlled axes: y1, y2, x, R

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Godpfezt R A Hox Ahtobr Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Condition: refurbished (used), Year of construction: 1986, Chamber filter press, completely overhauled, with stainless steel lining, 82 PP (food-grade) filter plates, 30 mm cake thickness, press capacity approx. 1100 liters, filter area 96 m², new filter cloths fitted, max. 15 bar feed pressure possible, closed discharge via 2 diagonal corner holes, automatic plate transport and optional stainless steel filter cloth washing system with 100 bar high-pressure pump, with stainless steel base frame for height adjustment, control cabinet Gjdpfx Ahsn Dw Nkstsbr

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters Gbsdpfo E Dquox Ahter - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: used, The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 840kg Gedozt Acfspfx Ahtebr Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1200 x 1200 [mm] Gbjdpfx Asuhai Rehtsr - Machine height : 2200 [mm] - Machine weight : 550 [kg] MACHINE HOURS - Working hours : 1070 [h]

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Execution : * number of mounts : 2 - Fix table : * length : 210 [mm] * width : 210 [mm] - Press frame : fix - Hole in the table : diameter 80 [mm] - Number of punches : from 50 to 150 [p/min] - Adjustable slide : 40 [mm] - Fix travel : 27 [mm] - Max height for tooling : 148 [mm] - Passage through mounts - Longitudinal : 230 [mm] - Electric connection : 380 [Volt] Gjdjuhakbjpfx Ahtsbr - Total installed power : 0.75 [CV] - Weight : 640 [kg] - Floor space (length x depth x height) : 1100 x 1000 x 1500 [mm]

Condition: used, TECHNICAL DETAILS - Force : 5 [kN] - Working stroke : 35 [mm] - Spindle height : 400 [mm] - Slide bore diameter : ø 10H7 [mm] Gbodjuhallspfx Ahter - Angle : 95 [°] - Max. tool weight : 15/30 [N] - Table dimension : 110 x 80 [mm]

Condition: used, TECHNICAL DETAILS - pressure : 4 [t] - number of supports : 2 - fixed table dimensions : 210 x 210 [mm] - fixed press assembly Gsdpfx Ajuhahmohtsbr - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] - voltage : 380 [V] - installed power : 1.5 [kW] - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]

Condition: used, TECHNICAL DETAILS Same as on photos Gbodpfxsuhaids Ahter

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] Gjdpsuhahaofx Ahtebr - Table diameter : 220 [mm]

Condition: used, TECHNICAL DETAILS - pressure : 4 [t] - number of supports : 2 - fixed table dimensions : 210 x 210 [mm] - fixed press assembly - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] - voltage : 380 [V] - installed power : 1.5 [kW] Gjdpfx Ahouhahgotsbr - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 606 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] Gsdpfsuhak Iox Ahtjbr - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions (length-width-height) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 2290 [h] Gsdpjuhak Usfx Ahtsbr - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((ength-width-height) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]