Used Fette Tablet Press for sale (12,513)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 054-008-212, Offer 25272 Technical data: - Max. pressing force: 25 t - Max. ram stroke: 500 mm - Stroke speed: 0 – 2.4 m/min - Return speed: 0 – 12 m/min - Installation height: 800 mm - Throat depth to ram center: 360 mm - Ram clamping area: 440 x 360 mm - Ram mounting shank: 40 mm - Table size: 630 x 500 mm - Table bore/opening: 180 mm - Electric foot switch Pgsdpfsy Ewtrjx Aflep - Two-hand control panel - Drive: 400 V / 8.75 kW - Required space approx.: W 800 x H 2750 x D 1150 mm - Weight approx.: 2000 kg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm Pgodpfxoxuhzcj Aflsp - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: used, Year of construction: 1961, colour units 1 max. printing speed sheets 5500 /h Pgedpfezpf T Eox Aflep max. paper size 26 x 38 cm serial no. 132.756

Condition: excellent (used), Year of construction: 2002, including Sheetmaster, Toolmaster, and Gripmaster Hours: 11,800 Location available upon request Pedpfszp Dwpsx Aflsgp Images available upon request

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table by Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With this press, you can, with some limitations, do without a hydraulic veneer press. New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral materials. Frame internal dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which means the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel casters, lockable Frame easily folds open, secured with two latches Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Pgsdpfey Hl Hpsx Aflsp Original paint, some areas have been touched up The silicone membrane and the base plate have been replaced, the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (L x W x H). Weight approx. 550kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm Pgodpfeznuiyex Aflsp The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,300 mm, total width: 1,400 mm, total height: 2,000 mm, Lithographic press, also known as a scraper press, for manual printing from lithographic stones. Used by artists for lithography, in schools, art academies, and museums. The machine was last used in the workshop of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 80 x 130cm. Pgjdpfxex A H I Do Afljp Also very interesting as an exhibit in a lobby, restaurant, etc., or for production. Many squeegees in various widths are included as accessories, as well as 4 different hand rollers with leather coverings for inking the stones. The wooden table needs minor restoration. Lithographic stones in various formats can also be supplied.

Condition: used, Year of construction: 1959, machine/vehicle number: 4501, hydraulic table press Pgedpfjzp Nxrox Afljp

Condition: excellent (used), Year of construction: 2009, operating hours: 93 h, machine/vehicle number: GS000526, Size 36 x 52 cm, Alcolor Vario dampening system, Technotrans cooling and recirculation system, Ink unit temperature control, Anicolor inking units, Double sheet detection, Side guide control, Blanket washer, Roller washer, Impression cylinder washer, Autoplate system, IR dryer, Extended delivery. Pedpfx Afjznl T Aslsgp

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted Pedpfezp R Dpox Afljgp * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP • OPA • LDPE • HDPE • PP films

Condition: used, Year of construction: 1994, KAISER Press Pressing force 4,000 kN Podpfxozp Ed Rj Aflsgp Stroke adjustment 40-200 mm Ram adjustment 150 mm Stroke rate 20-80 1/min Table area 2,340 x 1,600 mm Ram area 2,000 x 1,500 mm Installation height 550 mm

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Heidelberg GTO 52 Year of manufacture: 1996 Powder spray dampening system Varn Kompac dampening system Pgsdpezpamgefx Aflep

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 200 mm, retraction force: 10 t, overall weight: 5,700 kg, operating pressure: 250 bar, installation height: 450 mm, pressure: 250 bar, We offer this used Lauffer RPT100 hydraulic press, year of manufacture 1992. Machine type: RPT100 Machine no.: 14161 Year of manufacture: 1992 Weight: 5,700 kg Maximum pressing force top ram: 1,000 kN Maximum pressing force bottom ram: 100 kN Pjdpfxsywiyuo Aflsgp Retraction force top ram: 100 kN Retraction force bottom ram: kN Maximum stroke top ram: 200 mm Maximum stroke bottom ram: 80 mm Maximum operating pressure: 250 bar Shut height: 450 mm Overrun stroke: 20 mm Overrun time: 84 ms Safety distance: 134 mm For sale is a hydraulic high-speed press from the quality manufacturer Maschinenfabrik LAUFFER GmbH & Co. KG. Technical specifications: Manufacturer: LAUFFER Designation: Hydraulic high-speed press / hydraulic down-stroke press Type: RPT 100 Year of manufacture: 1992 Factory no.: 14161 Pressing force: 1,000 kN (≈ 100 t) Operating pressure: 270 bar Stroke (ram): 307 mm Clamping area / table: 710 × 450 mm Clearance: 710 × 560 mm Distance from clamping area to ram: 450 mm Column spacing (according to card): 830 mm (width) / 280 mm (length side) Power requirement: 15 kW Pump delivery rate: 30 l/min Speed: 1,500 rpm Oil capacity: approx. 450 l Oil type: HLP 46 (DIN 51525) Condition / Inspection: Used machine from industrial stock. Inspection and collection by arrangement. Collection/logistics: Loading by crane included.

Year of construction: 2009, condition: ready for operation (used), A hydraulic CNC press brake Eht. Press force: 230t, working length: 4550mm, distance between side frames: approx. 4050mm, max. stroke: approx. 300mm, max. installation height: approx. 500mm, max. throat depth: approx. 405mm, approach speed: approx. 100mm/s, working speed: approx. 10mm/s, return speed: approx. 100mm/s, control: Cybelec ModEva 10S, operating hours: 41789h. Including various punches and dies. Weight: approx. 23,5t, machine dimensions X/Y/Z: approx. 2400mm/5200mm/3100mm. Documentation available. An on-site inspection is possible. Pgedpfxjzpyx Aj Aflop

Condition: excellent (used), Year of construction: 2000, AMADA PROMECAM MODEL HFE 8025 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE description TYPE HYDRAULIC DOWNSTROKING CAPACITY 80 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2500 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW Pedpfozbzq Ssx Aflsgp APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V000426 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2000 price POA

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Distance between uprights: 2650 mm Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Podpfx Aowcd Spoflegp Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing Pgjdpfx Afjpygydslep year 1993 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 Pgodpfoh H Duhex Aflep NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103-3 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 100-3 downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Podpoyt H Awsfx Aflsgp Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 6800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Pjdpfxeyym Hke Afljgp Table height 960 mm Open Height 370 mm Throat Depth 100 mm

Condition: excellent (used), Year of construction: 2001, year 2001 price POA Pgjdpfx Afozbqn Helsp stock no. 01859 specification 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE HIGH SPEED LONG STROKE MODELSTOCK NO 02029 description TYPE HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 80 TONS CONTROL OP 2000 NO OF AXIS SEVEN BENDING LENGTH 2500mm OPEN HEIGHT 620 STROKE LENGTH 350 THROAT DEPTH 420 MOTOR SIZE15 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK SIDE INTERLOCKED FENCING REAR INTERLOCKED SERIAL NUMBER V011137 MAX APPROACH SPEED 200 MAX BEND SPEED 20 MAX RETURN SPEED 200

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING WEIGHT 11200 KG Pgjdpfx Ash N Dqrsflsp SERIAL NO. 6150/11324 MOTOR SIZE 7.5 KW YEAR OF MAUFACTURER 2004

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Pr4 100/3100 Make: Edwards Pearson Model: PR4 100/3100 MULTI- AXIS Year / new: 1996 Total axis: 6 – 4axis back gauge X R Z1 Z2 Capacity / bed size / tonnage: 3metre x 3100mm x 100ton Cnc control: Cybelec DNC 80 Cnc control Podew Aw Svepfx Afljgp Max closing speed 200mm Can be viewed under power

Condition: excellent (used), Year of construction: 2005, AMADA MODEL HFT 130-4 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 AMADA CONTROL 4 AXIS cnc control, FEISSLER machine mounted laser guards , side and rear interlocked fencing Model Amada HFT 13/3 downstroke CNC Press brake Year 2005 Tonnage 1300 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Pgjdpfx Afszbqnysljp Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 11kw Weight 8750 kg Bed Length 3000 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE Pgedpfx Aowybcysflop description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW