Used Flexographic Printer for sale (2,767)

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Hnodpfxjzhlr Ej Aaisr Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2013, Stratasys 3D printer Dimension Elite Hsdet Dq Rlopfx Aaionr Maximum build volume : 203x203x305mm Size: 686x914x1041 Weight (kg): 136

Condition: good (used), functionality: fully functional, machine/vehicle number: D30423, operating hours: 3,136 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 240 V, input current: 7 A, input frequency: 50 Hz, feed length X-axis: 355 mm, feed length Y-axis: 355 mm, feed length Z-axis: 254 mm, The machine is being sold due to a restructuring of our machine park and is immediately ready for use. Hnsdpszh Nayjfx Aaior The scope of delivery also includes various residual materials, so the printer can be used immediately after commissioning. We will gladly provide further information about the accessories and included materials upon request.

Condition: good (used), German RepRap (innovatiq) Type: German RepRap X500 Hodpfszg Tz Esx Aaijnr RepRap 3D printer Technical specifications: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s XY precision: +/- 0.05 mm Max. volume: 500 × 400 × 450 mm Power: 230 V AC, 50 Hz, 10 A, 2.3 kW Other features: Touchscreen Condition: used Scope of delivery: (See pictures) + Filament spools (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not included! A license for the current software required to operate the printer must be purchased separately by the customer (approx. 200 euros for Simplify3D)! (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Hnodpfx Ajzg Tzlsaier Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, HP Indigo Press 7800 The machine is in excellent condition, still installed, and currently in operation. It can be inspected under production conditions by appointment. According to the current owner, there are no outstanding technical issues, and the machine is fully up to date. Machine details: Manufacturer: HP Indigo Model: HP Indigo Press 7800 Serial number: IL 47000146 Year of manufacture: February 2015 Impression counter: approx. 19.7 million impressions, as of June 2025 Number of authorized colors: 7 Number of installed colors: 7 White ink authorized: Yes Machine still in production: Yes Availability: immediately, but not urgent Configuration and features: • 7-color configuration • White ink authorized Hnodpfx Aszacdweaisr • Thick substrate kit • One-Shot technology • Inline spectrophotometer • OFIR kit • Spare Ink Tank S3 • Chiller unit • UPS system • HP service contract • HP Production Pro for Indigo IN100T Digital Front End Hardware • HP Indigo Z4 G4 2133 V2 Control PC • HP Software Version 16.2.2 Technical and optical condition: The machine is reported to be in very good condition. According to the seller, there are currently no outstanding technical issues. The machine is fully maintained and up to date. In 2023, the entire material path was renewed/replaced, from the feeder to the stacker. This is a very important value factor, as the material transport section is one of the most relevant areas for stable and reliable production.

Condition: ready for operation (used), Innotech ZGW F25 final assembly workstation, assembly station, workstation, workbench Hermes A4L label printer UV light Hnodpfx Aex Hwcieaijr Magnifier lamp PC, monitor, keyboard You are welcome to visit for an inspection. We are happy to organise affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided that a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and have a look at our other offers as well. All mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the item's description may occur and are reserved.

Condition: good (used), Year of construction: 2004, functionality: fully functional, product width (max.): 500 mm, We are offering an EDALE flexographic printing machine with a total of 8 printing units and two die-cutting stations. Hnedpfoxhd A Asx Aaisr

Condition: excellent (used), Year of construction: 2004, Edale Sigma 510 8 Colors Model: Sigma Year: 2004 Condition: Very good, regularly serviced Availability: Immediately Technical Specifications: Printing Units: 8 x UV flexo Configurable as 8 front-side or 4 front + 4 reverse Die-Cutting Units: 2 Web Width: 510mm Conversion Options: Roll-to-roll and roll-to-sheet Turn Bars: 2 (for front/back printing) Register Control: Included Drying System: UV curing on all units Inspection: Camera-ready setup possible Applications: Labels, films, flexible packaging, paper and carton Included Accessories: Magnetic cylinders, printing cylinders, anilox rollers Unwinder: Included Rewinder: Included Hnjdjzgvv Sspfx Aaisr Additional Details: The machine is fully operational and has been well maintained. Ideal for short to medium production runs with high flexibility. All documentation available.

Condition: good (used), Year of construction: 1993, Flexographic printing press: Arsoma EM410 Hodpfx Aaezgvqioienr Year: 1993 6 printing units: 5 solvent-based + 1 UV 1 turning unit 1 auxiliary motor for the main press 1 unwinder/rewinder 1 die-cutting unit 1 cutting unit including printing cylinder + anilox coating + documentation

Condition: used, Stratasys Objet Objet30 Prime V3 + Cleaning Glovebox Technical specifications: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Hnodpfx Aaszgcqcjisr Model materials: Transparent, rigid (VeroClear) Rigid, opaque, white (VeroWhitePlus) Rigid, opaque, blue (VeroBlue) Rigid, opaque, black (VeroBlack) Rigid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: used, Year of construction: 2008, machine/vehicle number: 1277, product width (max.): 670 mm, working width: 670 mm, type of input current: three-phase, Label flexo printing machines OMET Varyflex Year 2008 - POLAND Number of colors: 8 Drying system: UV GEV Printing width: 670 mm Flexographic printing repeat (min): 12” Flexographic printing repeat (max): 33” Maximum unwind diameter: 1000 mm Maximum rewind diameter: 1000 mm Drying units: 8x UV, 5x hot air Mechanical speed: 200 m/min 76.2 mm – 3” shafts BST web guide Corona Vetaphone Video BST Availability: Immediate Operational status: In production Sleeves (8 pcs of each size – one sleeve for each of the 8 printing units): 14” 8/48 359.833 mm 14” 16/48 364.067 mm 15” 3/8 390.525 mm 16” 4/8 419.1 mm 18” 4/8 457.2 mm 19” 4/8 495.3 mm 19” 13/16 503.238 mm 22” 5/8 574.675 mm 24” 13/16 630.238 mm 27” 4/8 698.5 mm 29” 6/8 755.65 mm 32” 3/8 822.325 mm Anilox rolls: 500/4 – 2 pcs 500/3.8 – 1 pc 500/3.5 – 2 pcs 500/3 – 2 pcs 500/2.5 – 2 pcs 470/3.1 – 1 pc Hedpfxoziz Hue Aaijnr 400/5 – 2 pcs 400/4.5 – 2 pcs 380/5.5 – 1 pc 340/6 – 1 pc 320/5.5 – 3 pcs 320/7 – 1 pc 280/6 – 2 pcs 280/8 – 1 pc 180/12 – 2 pcs 140/8 – 1 pc 120/10 – 1 pc 100/14 – 1 pc

Condition: good (used), functionality: fully functional, Year of construction: 2014, overall weight: 41 kg, Technical Specifications: Build Volume: 30.5 L x 30.5 W x 45.7 H cm [12.0 L x 12.0 W x 18.0 H in] Layer Resolution: 100 microns [0.0039 in] Filament Diameter: 1.75 mm [0.069 in] Print Chamber: Enclosed and heated build chamber Connectivity: USB, Ethernet, Wi-Fi Hsdpfxoqy E N Se Aaijnr Condition Details: Usage Details: Used for small parts and prototypes. Printer's extruded filament readings may show inaccuracies. Overall Condition: Expected wear from use, few scratches, and dust due to infrequent use. Well-maintained. Included in the Kit: MakerBot Replicator Z18 3D Printer On-board Camera for Print Monitoring Swappable MakerBot Smart Extruder+ MakerBot Large PLA Filament (Various Sizes) Intuitive Display, Dial, Assisted Leveling Condition Note: Company-used printer, always stored in optimal conditions.

Condition: excellent (used), Xerox / Fiery EX-P 6 controller for the Xerox Iridesse. Tested and in good working condition. All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo. Hodexyv Nxepfx Aaijnr

Condition: used, Year of construction: 2020, machine/vehicle number: 3771695093, Xerox Primelink C9070 This is a Xerox Primelink C9070 production copier in very good condition. Counter: 274K (166K B&W / 107K color) Technical specifications: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is now one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics into every level of our business, we offer our customers high-performance products at competitive prices. Why do our customers choose CM Solutions? - 30 years of international experience in over 50 countries - 20 brands of machines: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta… - A large stock of 2000 copiers available immediately - A team of qualified technicians Do not hesitate to contact us for more information. Hedpfx Aswhprfoaienr

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. Hjdpozhr Rhefx Aaionr This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: excellent (used), 3D systems Type: DT60 Print volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in Z-axis: 1.25 microns Precision in X and Y-axis: 7.5 microns Max. extruder temperature: 500 °C Max. build chamber temperature: 120 °C Nozzle diameter: 0.6 mm Other available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7" LCD touchscreen Remote monitoring Industry 4.0 compatible: WiFi, Ethernet, HotSpot, USB Hnsdpfxjzd Tugo Aaier MMS system - Modular Maintenance System Dual filament loading Automatic filament change Heated feeder Jam detection Sensor for detecting filament end Print recovery system Liquid cooling Double-tempered glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) (Sale from location!) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Replaceable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5 m/s Large line detection: 25 m/s Hnodpfx Aezd Tt Asaisr Build volume: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Hnedezd Tllepfx Aaier Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Arburg Type: Arburg Freeformer 300-3X Additive manufacturing of complex functional components With high-temperature option The new, larger freeformer 300-3X processes three components in ARBURG's freeforming process (AKF) and enables – for the first time worldwide – the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation "300" refers to the available component carrier area in square centimeters. Compared to the freeformer 200-3X, the build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters. "3X" always refers to the three axes of the component carrier that can move in the x, y, and z directions. For additive manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Hnsdpfx Aajzd Tiwsier Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Stratasys Type: Stratasys 3D printer, PolyJet printer J750 Objet Stratasys 3D printer With the Stratasys J750 3D printers, you can optimize and streamline the process of manufacturing models from various materials with a single build platform in the same print job. During the design phase, the J750 3D printer (with CAD software) can be used to assign colors to components of a model. The model can then be saved as a VRML file and printed with the desired colors. The Stratasys J750 3D printer has a build volume of 490 mm × 390 mm × 200 mm (19.3 x 15.35 x 7.8 in). AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 220–240 VAC, 50–60 Hz, 7 A, single-phase Materials Agilus30 family Digital ABS Plus Tango Transparent Vero family Hsdpfx Aaszd Tf Eeisnr Veroflex VeroUltra Opaque SUP705, SUP706 support material Applications Rapid prototyping Concept models Medical models Tools and fixtures Colored textures Total printing time on the machine is approximately 1483 hours. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), German RepRap 3D Printer Here, we offer a German RepRap 3D printer. The X1000 from German RepRap is a large-format 3D printer that produces objects in industrial quality. 3D Printer Data Sheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standard (PLA, ABS, PP ...) Technology: Fused Deposition Modeling (FDM/FFF) Pre-assembled: n.a. Dimensions: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm (in.) Minimum print density: n.a. Printing speed: 150 mm/s XY precision: XY: 20 µm Max. volume: 1000 × 800 × 600 mm File format: n.a. Hjdpszd Td Uefx Aaionr Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Additional features: Touchscreen Type: German RepRap X1000 Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Printing and labeling unit, Herma GmbH, Stuttgart Type PAX Hedped N Ip Hsfx Aaionr with integrated printer 230 V, 50 Hz in very good condition, directly from production!!! 2 identical printing and labeling units available.

Condition: excellent (used), Here we offer you a 3D SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows even large models to be produced without prior division. Furthermore, the large base area increases productivity when printing many small models in a single print job. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinters, operate using a layer-by-layer process based on the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unsolidified powder supports the parts during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Fully automatic (automated setup and self-monitoring, automated powder loading, automated recycling and powder removal, locking binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special setup requirements: None Type: ProJet 660 Pro 3D printer Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Hnjdpfxszdyxrs Aaior

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Here, we offer an Eos EOSINT plastic laser sintering system. Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking ram Removal carriage 3DM 8-zone process chamber heater 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Hodpfx Aozdywzeaijnr Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.