Used Gewema Band Saw for sale (8,440)

Condition: ready for operation (used), Bandsaw – Horizontal KASTO BSM 260 / 400 - Maximum cutting height: 260 mm - Cutting range, flat/rectangular: 400 x 260 mm - Miter cutting device Lodpfxszifc Te Agrert - Cutting speed, continuously adjustable: 17-110 m/min - Drive power: approx. 2.2 kW - Saw blade dimensions: 4310 x 27 x 0.9 mm - Coolant system - Roller support - Well-maintained, good overall condition Dimensions: L x W x H: 2.5 x 1.2 x 1.5 meters / 1300 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2011, cutting diameter 400 mm capacity 90 degrees: flat 500 x 400 mm saw band length 6220 x 41 x 1.3 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight ca. 250 - 300 kg/m Control MEBA NC coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. ca. 2250 kg range L-W-H 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Lsdsz Dkzuepfx Agrsrt Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - User-friendly NC dialog control * With plain-text display 5.7-inch CE panel * Program memory with 50 programs, each with 20 steps - Automatic material feed * Minimum cutting diameter .. Ø 5.0 mm * Residual piece length without bundle clamping .. manual 25.0 mm * Residual piece length without bundle clamping .. automatic 110 mm * Automatic movement of the clamping blocks - Rapid-feed lowering of the saw frame * With automatic material detection - Band saw speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Driven chip-clearing brush via friction wheel - Hydraulic full-stroke material clamping - Saw blade angled 3° relative to the material support surface - Saw blade idler rollers with carbide guides - Manual saw blade tensioning - Removable coolant tank for easy cleaning - Operating instructions

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, Horizontal band saw from Nobis, manufactured in 1970 The saw is fully functional and has a cutting width of approximately 1.2 m. It features its own carriage with a width of 1.15 m and a length of 10 m. Equipped with a mechanical log clamp. A sharpening device can also be offered if required. We have other used band saws available: 1.) Wehrhahn horizontal saw 145 Used, fully functional Cutting width: max. 145 cm, logs up to approx. 1.70 m can be cut Dimensions of saw carriage: 8 m length x 133 cm width (overall width: 155 cm) With 6 mechanical clamping devices Drive: 30 kW motor Circular saw attachment for core separation available Price: €23,900 Optional extras: Complete sharpening room: €9,500 Replacement gearbox: €2,000 Swivel crane: €5,000 2.) Nienkemper BS0 horizontal band saw from 1955 In good working condition Frame width: 130 cm Blade guide width: 121.5 cm Cutting capacity: Logs up to 115 cm without turning Theoretically up to 120 cm without turning Lrodpfx Aeyk D Dmogret Larger diameters possible by turning the log Solid, stable frame construction for easy installation Wheels: 1050 mm x 110 mm Includes: Newly rebuilt carriage (1.20 x 6.00 m) New axles Overhauled clamping clamps Price: €29,900 If you are interested, please feel free to contact us. Prices can be negotiated by phone. Shipping is possible upon request.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152855, Item 25078 Technical specifications: - Cutting area at 90°: round 550 mm - flat 570 x 550 mm - Cutting speed continuously adjustable from 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure continuously adjustable from 0 to 10 m/min - Automatic material feeder Lrodjv Say Aopfx Agret - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW - Stop - 2 x roller conveyors 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Condition: like new (used), - Two feed speeds - Pneumatic pressure on the feed roller Lodpfx Agezxxr Hjrert - Maximum cutting width: 210 mm - Main motor power: 13 kW - Maximum cutting height: 500 mm - Year of production: 2001 - Safety pull cord

Condition: excellent (used), CATALOG NUMBER 7050 TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm Ljdjzrlfmopfx Agrsrt - Angle-adjustable table - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm - Extraction port diameter: 90 mm - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 1993, machine/vehicle number: 28794, Offer 24419 Technical data: - Roller diameter 520 mm - projection 510 mm - max. passage height 420 mm - Table size 750 x 800 mm - Table swivels left + right 15 / 30 ° - Table height from floor 1020 mm - Saw blade length 4120 - 4200 mm - saw blade width 20 - 25 mm - infinitely variable cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar Lsdpfx Ageuk D I Rjrort - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welding unit in the machine stand - Grinding stone - Shears + air pump - lighting

Condition: excellent (used), CATALOG NUMBER 7116 TECHNICAL DATA Lrsdpfx Agjzh Hv Ssret - Wheel diameter: 630 mm - Table dimensions: 880x700 mm - Table adjustable at an angle - Motor: 3 kW - Max cutting height: 300 mm - Throat (blade to frame): 580 mm - Extraction nozzle diameter: 90 mm - 2 speed settings - Brake - Dimensions (L/W/H): 1200x920x2250 mm - Weight: 702 kg ADVANTAGES – Manufactured in Poland – DTR technical documentation – Very good condition – Used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major fluctuations in the exchange rate, the price may change)

Condition: used, Year of construction: 1998, functionality: fully functional, We are pleased to offer you a rare Braun-Canali horizontal bandsaw with an approximate cutting width of 200 cm. The machine can theoretically cut logs with a diameter of 250 cm, as the saw head can be raised very high. Lrsdpfx Agoykrdzoret Wheel diameter approx. 140 cm, saw blade widths 130–160 cm. The thickness/height adjustment has been completely rebuilt, with a new gearbox and new electronics for thickness calculation (see pictures). We have a selection of 3 different models of log carriages in stock: 1. Modern Schulte log carriage 1.5 m x approx. 10.0 m, hydraulically prepared, but not functional. 2. Older Schulte log carriage 1.5 m x approx. 10.0 m, prepared for manual clamping device. Supplied with a Schulte log carriage drive. 3. Conversion of the log carriage to hydraulic clamping of the log with 5 stations. Price: €15,000 (we can provide a contact for a specialist for this). The saw has already been disassembled and is ready for loading at our warehouse in 27367 Bötersen. Installation is straightforward, as the frame is manufactured in sections. We apologize for the poor-quality photos from the saw’s storage area. If you are interested, please do not hesitate to contact us or submit an offer. Shipping in a container is possible upon request.

Condition: used, Year of construction: 2018, functionality: fully functional, ROUNDWOOD PROCESSING LINE Line supplied by MSK a.s. in 2018, supplemented with a vertical band saw from J. Bögli AG. The line was built in 2018. The band saw is older, but its exact year of manufacture is not known. The band saw can process logs with diameters from 30 cm to 100 cm; the maximum log length is 10 metres. The line itself is designed for a maximum length of 5 metres. When longer logs are sawn, they can be discharged from the band saw via conveyors No. 15 and No. 16. The cant cross-cut saw has a minimum cutting length of 800 mm and a maximum length of 5 metres. The twin-shaft multi-rip saw has a maximum cutting height of 215 mm and a maximum width of 600 mm. In 2024, the line was supplemented with a Skywood twin-shaft circular saw for processing small-diameter logs from 12 cm to 46 cm. Log length: minimum 2 m, maximum 5 m. The line can operate in parallel (band saw and Skywood) or independently with either one of these machines. Lrsdpozta Ifefx Agrot Required staffing for line operation: Band saw 1 Skywood 1 Cant cross-cutting 1 Multi-rip saw 2 Cross-cutting, edging and sorting of side boards 2-3 JCB / forklift 1

Condition: good (used), Fully automatic band saw from Imet Type BS 400 60 AFi-NC Lrjdpezz Rpijfx Agrjt Year of manufacture 2013 Capacity ø 310mm Single-sided miter cut max. 60 degrees Material selector switch

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Lrjdsvyl Ihjpfx Agrst Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 16.456 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. Lrodpfjvuhumsx Agret horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: good (used), Year of construction: 2009, functionality: fully functional, BMBS 240 x 280 H-G Technical Data Motor power: 400 V / 50 Hz – 1.4 / 2.0 kW Bandsaw speeds: 35/70 m/min Bandsaw dimensions: 2980 x 27 x 0.9 mm Footprint (LxWxH): approx. 1700 x 970 x 2020 mm Material feed table height: approx. 915 mm Ljdpfx Agoykailjrsrt Weight: approx. 360 kg Round pipe material: approx. 240 mm Square material, horizontal: approx. 280 x 220 mm Square material, vertical: approx. 250 x 240 mm - Hydraulic saw bow descent and manual operation - Mitre cutting device - Coolant system - 2 bandsaw speeds

Condition: used, Year of construction: 1975, roll diameter 440 mm throat 420 mm workpiece height 200 mm cutting speed 20 - 1550 m/min table surface area 560 x 560 mm Lredpfxevu Hb Es Agrot band length 3250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 2,1 m Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands - documentation

Condition: used, Year of construction: 2024, New demonstration machine! Particularly heavy-duty design with high dead weight for maximum smooth running • Exceptionally quiet and precise operation thanks to torsion-resistant machine housing • Large cast parallel fence with round bar guide, easy to move Ledpfx Agowggaksrjrt • Cast flywheels with rubber coating and cleaning brush • Large grey cast iron saw table, tiltable with ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Door safety switches • Self-braking motor • Two extraction ports Technical data: Table dimensions (L x W x H): 720 x 520 x 860 mm Cutting speed: 1,650 m/min Weight approx. 240 kg Max. cutting height: 350 mm Max. cutting width: 520 mm Max. saw blade length: 4,260 mm Saw blade thickness min./max.: 0.5 / 0.6 mm Precision guides top/bottom Saw table tilt: 0 - 20° Machine dimensions (L x W x H): 870 x 620 x 1970 mm Location in stock:

Condition: ready for operation (used), 6230 - ITALPRESS Bandsaw - Motor Power: 3 kW - Table Length: 103 cm - Table Width: 71 cm - Maximum Cutting Height: 3200 mm - Maximum Cutting Width: 6700 mm - Wheel Diameter: 700 mm - Manual Brake - Maximum Blade Length: 5020 mm - Minimum Blade Length: 4920 mm - Star-Delta Start Ljdezxxqcopfx Agrert - Manually Adjustable Fence - Voltage: 380 V - Dimensions: Width 1400 mm, Length 800 mm, Height 2200 mm

Condition: ready for operation (used), Mössner Rekord SM / 420 Vertical Band Saw for Metal Throat depth: 410 mm Wheel diameter: 420 mm Maximum workpiece height: 265 mm Saw band length: 3160 mm – 3260 mm Working height: 1000 mm 4 gearbox speeds Space required: approx. 920 mm x 740 mm x 1815 mm (L x W x H) Weight: approx. 560 kg Ledpfxsyh Uyqe Agrjrt Band welding unit: Ideal You are welcome to come and inspect the machine. We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Deviation from technical data or errors in the description of the item may occur and are reserved.

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable * For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping Lrjdpfxezv Ul Ds Agret - Ergonomic control panelâ??front right, swiveling - Coolant system - Operatoration manual * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Ledpfjy Anp Eox Agrort Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Lrsdpfeq Evn Eox Agrst Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: used, Professional bone saw Kolbe K330 is designed for fast, precise and safe cutting of fresh and frozen meat, bones and larger product pieces in butcher shops, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require strong performance, reliable operation and high cutting quality in daily professional use. The saw provides fast and even cutting thanks to the high blade speed of 22 m/s, ensuring efficient work and precise cuts. It is suitable for processing bones, carcass sections, large meat pieces and frozen products. Model K330 is equipped with 300 mm wheel diameter and uses a 2490 mm blade, providing stable operation, accurate blade guidance and excellent cutting results. Maximum cutting height is 320 mm, while cutting width is 280 mm. The construction is largely made of stainless steel, ensuring long service life, high hygiene standards and easy maintenance. Stable industrial design makes this model an excellent choice for professional users. Technical specifications: Machine type: Bone saw Ledpfx Ajy Izqtsgrjrt Manufacturer: Kolbe Model: K330 Power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Blade speed: 22 m/s Wheel diameter: 300 mm Blade length: 2490 mm Maximum cutting height: 320 mm Maximum cutting width: 280 mm Material: Stainless steel Application: Cutting bones, fresh and frozen meat Use: Butcher shops, meat processing, supermarkets, professional kitchens Operation: Fast, precise and reliable Maintenance: Easy and simple

Condition: used, Year of construction: 1990, serial number 720340 Ledpfxeztfx Ns Agrert weight 400 kg volt 380 V band length 3400 mm band length min. 3200 mm

Condition: good (used), functionality: fully functional, power: 1 kW (1.36 HP), input voltage: 400 V, total height: 2,000 mm, total length: 1,600 mm, total width: 700 mm, overall weight: 1,000 kg, For sale: a THIEL 19 metal band saw. Ledpfx Aszxptnjgrjrt Year of manufacture unknown. Fully functional, including saw blades. Table dimensions: 750 x 650 mm Saw blade length: min. 3425 mm / max. 3725 mm Dimensions & Weight: Dimensions (L x W x H): 1600 x 700 x 2000 mm Weight: approx. 1000 kg The machine can be inspected and tested at our location in Chemnitz.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Description AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronous running brush for chips removal. Material clamping is performed by a full-stroke sectional vice. The material feed is manual. The cut material outlet is fitted with a slide. The saw band drive is equipped with a frequency convertor that allows the band’s optimal speed to be set against the processed material within the 20-120 m/min range; this significantly increases both the saw band lifetime and the machine productivity. Further, the band is tilted against the vice load surface at 2° angle, which also significantly reduces cutting times and contributes to a longer band lifetime. Thanks to their arms rigidity, double-column bandsaws with a fixed arm position achieve much shorter cutting times (especially in cutting full materials) than machines with articulated saw arms. Key features Both-sided linear guiding of the saw arm Arm laid on linear guiding Automatic downfeed pressure regulation Lrodpfx Agevk R R Norst Simple and clearly arranged control