Used Gf Agiecharmilles Cut 1000 for sale (25,865)

Condition: used, Flat webbing sling, L. 1000 mm, suitable for lifting slings HB 5.0 · with fabric inlay Itsdpfx Ajz Tymaeg Aen · for lifting rough and sharp-edged loads · quick and easy installation on any round sling · when ordering, specify the length of the flat webbing sling in meters · further technical

Condition: used, Retractable belt post, D83xH1000mm, post yellow, belt yellow/black. · Equipped with a self-retracting belt, providing an effective and quick way to cordon off hazardous areas in production or in the warehouse. · Belt post height 1000 mm, with 4 longitudinal grooves in the aluminum. Itodpfoz Txwwsx Ag Asn

Condition: used, High-performance cutting oil Cut 2000, 10-liter canister, OPTA · (formerly opta 2000) · Chlorine-free, nitrite-free, and silicone-free Itsdpfxez T D U Uj Ag Ajn · For all types of machining operations: e.g., thread cutting, drilling, countersinking, reaming, milling, turning, broaching, etc. · For both manual lubrication and circulation lubrication · For machining all ferrous and non-ferrous metals, low-carbon and high-alloy stainless steels with good corrosion and acid resistance · Other technical properties: Chemical basis: mineral oil · Material suitability: stainless steel, steel, aluminum

Condition: used, Hand-held cutting torch 45-3AL835, torch head 70°, length 835 mm, for gas-mixing nozzles, HARRIS · for gas-mixing nozzles · conforms to EN ISO 5172 · robust design Isdoz T Evaopfx Ag Ajtn · the gas-conducting pipes are arranged in a triangular configuration up to the forged torch head · can be used with all fuel gases by replacing the gas-mixing nozzles · torch head and handwheels of the valves made of brass · valve spindle made of stainless steel · high cutting performance: very robust Other versions available upon request · Further technical specifications: weight: 1 kg · Design: for gas-mixing nozzles · Torch head: 70°

Condition: used, Collection basin, 1000 l, L3850xW1460xH780 mm, steel sheet with grating, yellow-orange Iodpfx Agoz T Ughs Ajtn · For storage of containers (IBC) or drums · Complies with the Declaration of Conformity (ÜHP) according to StawaR, approved for flammable liquids with the hazard symbols F / F+, max. density

Condition: used, Cut-off disc A 46 TZ Special D230x1.9mm, straight, INOX, bore 22.23mm, KLINGSPOR · Special disc for thin sheets, made of steel and stainless steel · Hard bond · Free of iron, sulfur, and chlorine-containing fillers Itsdpfjz Uc Icsx Ag Ajn · Very good cutting performance · Low energy consumption · Low material consumption · Low burr formation · Bore 22.23 mm Ø · Other technical properties: max. speed: 6600 min⁻¹

Condition: used, Welding and cutting set RHÖNA 2001 AC, injector cutting nozzle 10-100 mm, GCE RHÖNA Iodsz Ucwdopfx Ag Astn · Connection thread: M27 x 1.5 mm · Shaft diameter: 20 mm · For fuel gas acetylene · Further technical specifications: Connection thread: M27 x 1.5 mm · Shaft diameter: 20 mm

Condition: used, Collection basin, 1000 liters, L3850xW1460xH780mm, steel sheet with grating, silver Iedpsz Udw Eefx Ag Aetn · For storing containers (IBCs) or drums · Complies with the Declaration of Conformity (ÜHP) according to StawaR, approved for flammable liquids with the hazard symbols F / F+, max. density

Condition: used, Core drill, D.40mm, HSS, cutting depth 30mm, Weldon shank, RUKO · HSS · with Weldon shank 19.05 mm (3/4") · CBN-ground · Cutting depth 30 mm · Further technical features: Shank design: Weldon · Number of teeth: 10 · Cutting depth: 30mm Itjdjz Ub Hkopfx Ag Ajn · Overall length: 63mm

Condition: used, Workplace flooring, cut to size: 600x14mm, black PVC, 2-layer. Price per linear meter. Safety Deckplate. · Two-layer, durable premium ergonomic mat with a non-slip, textured surface. Iodpfx Aoz Ubpreg Astn · DUALlayer: foamed PVC backing, extremely robust, self-extinguishing PVC.

Condition: used, Flat webbing sling, L. 1000 mm, suitable for lifting slings HB 4.0 · With fabric insert · For lifting rough and sharp-edged loads · Quick and easy assembly on any round sling · When ordering, please specify the length of the flat webbing sling in meters. · Further technical Itedpfx Asz Uciyjg Ajn

Condition: used, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Low-noise operation and smooth running For pressure tank sizes in the lower range, up to 200 liters, they are available in either mobile or stationary versions. for mobile versions in the pressure tank range of 50 - 200 l • Check valve • Relief valve • Pressure gauge • Safety valve • Condor pressure switch • Quick-release coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure tank range of 50 - 500 l • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Pressure gauge • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug Iedpfxoz Ukqrj Ag Astn • Relief valve from 5.5 kW motor power: • Automatic star-delta starter for wall mounting • Solenoid valve with silencer Intake capacity l/min 990 Delivery rate l/min (at 7 bar) 780 Motor power kW 5.5 Rated voltage V/Hz 400/50 Compressor speed min 925 Max. pressure bar (g) 10 Tank capacity l 500 Stages 2 Weight kg 322 Dimensions l/w/h in mm 2,000/700/1,520

Condition: used, Slitting stand, cutting width 750 mm, dimensions 1120 x 850 x 1665 mm, stationary · Horizontal configuration with two slitting units, each with two interchangeable cassettes (rotary knives/blades) · Maximum total roll weight up to 130 kg · Additional technical features: outlet height, continuously adjustable Itedpfx Asz T Rrmjg Asn

Condition: used, Electric chain hoist CPVF, capacity 1000 kg, main lifting speed 8 m/min, FEM group 1, with trolley * 250 to 2000 kg with trolley * with 2 lifting speeds * robust design for a wide range of applications * standard operating voltage: European standard 400/50/3 V/Hz/Ph * 42 V contactor control * motor in protection class IP 55, encapsulated control switch in protection class IP 65, with additional emergency stop protection * integrated limit switch for the highest and lowest hook positions * motors protected against the ingress of dust and spray water according to protection class IP 55 in accordance with VDE 0530 * thermal overload protection, externally adjustable safety slip clutch * electromagnetic spring-applied brake holds the load securely even in the event of a power failure * chain guide made of low-friction, thus low-wear, glass fiber reinforced polyamide * lifting height 3 m * suitable for flange width 58-180 mm, FEM classification (full load service life hours): FEM 1Am = 800 hours. Other load capacities and lifting heights available upon request. Iodpfx Ajz T Rl Heg Ajtn * Further technical features: Fine lifting speed: 2 m/min * FEM group: 1 Am * Lifting height: 3 m * Voltage: 400/50/3 V/Hz/Ph * Main lifting speed: 8 m/min * subject to mandatory testing: yes

Condition: used, Lever hoist, model AL, lifting capacity 1000 kg, lifting height 1.5 m, housing made of aluminum. · Compact design · Housing and hand lever made of lightweight aluminum alloy · Precise gearing and high-quality needle bearings · Easy to operate · Universally applicable · Low maintenance · Low weight Isdpfx Aoz T Sd Rog Astn · High-strength, round steel chain, zinc-plated according to EN 818-7 · Short hand lever · Chain disengagement mechanism · Further technical features subject to testing: yes

Condition: used, Welding and cutting torch RHÖNA Kombi 17 AC, injector cutting attachment, 10-100 mm Itodpfez T Rc Sjx Ag Aen · Connection thread: M21.5 x 20 G · Shank diameter: 17 mm, for fuel gas acetylene · Additional technical features: connection thread: M21.5 x 20 G · Shank diameter: 17 mm

Condition: used, Shredder, cutting width 4 x 25 mm, particle size B366 x H405 x D258 mm, 20 liters Iodsz T R H Rjpfx Ag Ajtn · The specially hardened, solid steel cutting rollers shred paper and office/paper clips. · Automatic start/stop function. · Attractive, timeless design. · Energy-saving drive.

Condition: used, Cut-resistant gloves Camapur Cut 620, size 7, white/grey, HPPE fibre with PU, EN 388, 10 PA · According to EN 388 · Category II · Seamless knit from Spectra® fibre · Partially coated with PU · Knitted cuff, back of hand free · Comfortable to wear · Good tactile sensitivity · Secure grip, e.g. on slightly oiled parts · Moisture-repellent · Cut protection level B · Application: Assembly work with medium cut risk, sheet metal processing, processing of plastic profiles · Further technical properties: Abrasion resistance: 4 · Tear resistance: 2 · Puncture resistance: 4 Isdpfxsz T Sm Ee Ag Astn · EN ISO cut resistance (Newton): B · Design: Knitted cuff, palm coated · Thickness approx.: 1.20 mm · Standard: EN 388

Condition: used, Shredder, Cutting Width B.3.9x30mm, Particle Size B375xH600xT310mm, 33l, HSM · Model designed for continuous use in the workplace · Effortlessly shreds credit cards and customer cards Ijdpfxoz T Ihfs Ag Ajtn · Automatic reversing function · Efficient energy management saves up to 90% compared to...

Condition: used, PVC mat, model Rl.L10000xB1000xS5mm, blue PVC · For assembly workstations and conveyor lines · Resilient, closed-cell, and textured work area mat made of soft PVC · Insulates against cold floors · Ventilation and drainage provided by the structured underside Itjdpfx Aez T R Diog Ajn

Condition: used, Cutting stand, cutting width 1250 mm, dimensions 800 x 880 x 1550 mm, mobile Iodsz T R N Ejpfx Ag Astn · Vertical · Particularly space-saving, as the rollers are mounted vertically on a rotating table · Mobile by tilting on 3 wheels · Max. permissible roller weight 200 kg, roller axle diameter

Condition: used, Core drill, D.28mm, HSS, cutting depth 55mm, Weldon shank, RUKO Iedjz Twz Uepfx Ag Aotn · HSS · With Weldon shank 19.05 mm (3/4") · CBN-ground · Cutting depth 55 mm · Further technical features: Shank type: Weldon · Number of teeth: 7 · Cutting depth: 55mm · Overall length: 88mm

Condition: used, Core drill bit, D. 50mm, HSS, cutting depth 55mm, Weldon shank, RUKO · HSS · with Weldon shank 19.05 mm (3/4") · CBN-ground · Cutting depth 55 mm · Further technical features: Shank design: Weldon · Number of teeth: 12 Itodpfx Asz Ttuksg Asn · Cutting depth: 55 mm · Overall length: 88 mm

Condition: used, Rigid drawbar. Itsdpjz Tu N Nefx Ag Aon

Condition: used, Shredder, Cut-B.3.9mm strips, B366xH405xT258mm, 20l · The specially hardened, solid steel cutting rollers reliably shred paper and office/paper clips · Automatic start/stop function · Attractive, timeless design Iedpfx Agoz Tuybo Astn · Energy-saving drive