Used Graewe Ps 250 for sale (11,783)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, PFEIFFER VACUUM "DUO 250" 250 m3/h 7.5 kW Used - fresh from the revision Pfeiffer VACCUM DUO 250 Condition: smoked replacement device Manufacturer: Pfeiffer VACUUM Type: DUO 250 Technical data: - 3 phases. - 7.5 kW power. - 960 rpm - Voltage 230/400V - Volume 250 m3/h - Weight 360kg Technical information without guarantee For details, please refer to the type plate - see picture Hfodpfsyzdmqox Ab Nog There are other vacuum pumps, vacuum systems, Edwards Booster EH1200 Roots piston vacuum pump for sale

Condition: new, mileage: 873 km, power: 375 kW (509.86 HP), driver cabin: other, gearing type: other, Reversing camera, heated windscreen, hands-free system, 7-inch touch display for bed control, turn assist system, front axle load 8.0 t, axle ratio 2.31, start-up warning system, Apple CarPlay & Android Auto, dark dashboard, attention assist, ComfortPlus equipment package, exterior color Frozen White, tires 385/55 22.5 make Continental / rear axle 315/70 R22.5 make Continental, CB radio antenna, DAB radio, dark interior flooring, ECOTORQ engine – 510 HP, EURO 6e, electric parking brake, electric tipper control, electrohydraulic steering with three driving modes (Comfort, Balance, Direct), ready for alcohol interlock installation, driver’s seat – premium high-grade Alcantara fabric, vehicle model Ford F-Max GEN 2.0, suspension: front leaf, rear air suspension, Ford Ecotorq OD transmission – 16-speed automatic – ratio 14.107–0.823:1, rear axle 13 t, including upper bunk, instrument panel 9-inch color display, Intelligent Speed Limit Assist (ISLA), keyless start, automatic climate control – 3 comfort modes (ECO, Standard, Comfort), LED headlights, multimedia system with 12.4" touchscreen, truck-specific navigation system, new safety assistance systems: "GSR package" (General Safety Regulation), emergency brake signal, premium Alcantara upholstery black, wheelbase/variant 3600 mm, tire pressure monitoring system, spare wheel omitted, steel wheels, fifth wheel coupling with coupling height 1100 mm, entry shoe compartment with rubber seal, sun blind, sun visor, standard mirrors, spoiler package with roof spoiler and side flaps etc., auxiliary air heater, sockets (12V/24V), fuel tanks: 600 + 450 liters (F-Max Series), tanks with side covers, Technology Package 5: automatic high-beam control, active brake assist with pedestrian detection, ACC with stop & go function, active lane keeping assist, USB ports type A and C, hidden step in bumper for window/sun visor cleaning, Voith Retarder VR 115CT. Hfedpfx Aey N Syuob Njg Note Despite meticulous checking of all our price labels, errors can still occur. Some may arise from transmission errors in the systems of different platform providers. Mistakes on our part cannot be fully excluded either. Therefore, we wish to point out that all information is provided without guarantee and does not constitute any legal claim. A price declaration cannot be considered a contractual component. If you place special value on a particular feature stated in our listing, please inform us at the time of contract conclusion. Thank you for your understanding!

Condition: used, mileage: 9,990 km, power: 140 kW (190.35 HP), color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, seat heater, - Passenger airbag - Electronic window regulator - left - Electronic window regulator - right - Driver airbag - In order to provide you with the best possible advice, we kindly ask that you arrange an appointment. Mr. Kiel will be happy to assist you, Tel: B25 Electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz entry badge, CA3 Active Steering Assist, CF8 Sports suspension, CK8 Heated steering wheel, CL1 Steering wheel adjustable for tilt and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, CU4 Aerodynamics package, D14 Anodised roof rails, E07 Hill start assist, E1D Digital radio (DAB), E1E Navigation, E1T Touchpad, E28 Additional battery for retrofit consumers, E4S Smartphone integration package, E7H MBUX Multimedia System High, EL9 2-way speakers front and rear, ES2 12V socket in trunk/load compartment, ES3 12V sockets for rear seat rows right & left, ET4 Active Distance Assist DISTRONIC, F1O Centre console with storage compartment & cupholder, F2W Winter package, F3Z Comfort closing, F48 Heated windscreen washer system, F65 Exterior mirrors, power folding, F66 Lockable glove compartment, F69 Ext. mirrors, F71 Interior mirror auto-dimming, FG9 Clip-on cupholder for rear armrests, FH0 Piano black trim elements, FP3 Mirror package, FS5 Illuminated vanity mirrors, G43 9G-TRONIC, H00 Warm air duct to passenger area, H15 Heated seat for passenger, H16 Heated seat for driver, H20 All-round heat-insulating glass, HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC, HZ0 Electric auxiliary heater, HZ1 Additional warm air heating, HZ7 Semi-automatic air conditioning, TEMPMATIC in rear, L5 Left-hand drive, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J55 Seatbelt warning for passenger seat, JA7 Blind spot assist, JA9 Traffic sign assist, JB4 Active Lane Keeping Assist, JB6 Parking package with 360° camera, JF2 ENERGIZING comfort, JH0 Widescreen cockpit, JH3 Communication module (LTE) for digital services, JM2 Extended automatic restart on motorways, JM3 Route-based speed adaptation, JM4 Active Speed Limit Assist, JP1 PRE-SAFE, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K51 Misinfuelling protection, KB5 Main fuel tank 70 liters, L45 MULTIBEAM LED with High Beam Assist PLUS, LA2 Headlight assist, LB9 Exit lights, LC4 Comfort roof control unit, LC5 Surround lighting in exterior mirrors, LC6 Reading spot in rear grab handle, LC7 Front footwell illumination, LC8 Surround lighting on tailgate, LE1 Adaptive brake lights, LE4 Ambient lighting in cockpit with 64 colors, LE6 Night lighting in rear, LG4 Rear, brake, and indicator lights with LED technology, MJ8 ECO start/stop function, MO5 EMISSION STANDARD EURO 6e RDE5 M/N1 GR. II, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800 rpm, MX0 BlueEFFICIENCY package, P28 EASY PACK package Hsdpfx Asyfntheb Nofg Elec. sliding door/tailgate, P2Y STYLE Plus package, Q50 Tow bar with removable ball head, QA4 Towing capacity 2,500 kg, RK8 Alloy wheels 7J x 17, 20-spoke design, RY2 Tyre pressure monitoring front and rear axles, wireless, S37 Outer armrests for individual seats 2nd row, SA1 Seat cushi... Metallic, Alloy wheels, Electronic immobilizer, ESP, ...

Condition: used, Used machine Year of manufacture: 2007 Equipment and technical data: - Motor 4.7/5.7 kW, pole-switchable - with right/left rotation Hedpjy R Haljfx Ab Nsfg - Milling spindle MK 5 / 30 mm - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling fence with metal jaws, mounted on a round insert plate and thus rotatable 360° - With table extension on both sides with extendable frame support - With attached roller table on the left side - With 4-roller feed unit, year 2007 - Dimensions: 240x65x120 cm - Weight approx. 900 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m Hjdpoy Ruqxofx Ab Nefg permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1990, Pressure 250 t Hfsdpfxjy Ruqrs Ab Neg stroke 16 - 160 mm no. of strokes 33 / 50 /min Throat 410 mm distance table/ram, max. stroke up, adjustment up 540 mm table surface area 1100 x 790 mm Hole in the table 660 x 320 mm table height over floor 720 mm Passage to the back 590 mm ram surface 800 x 500 mm ram adjustment 120 mm power requirement 16,0 / 23,0 kW weight 28,5 t dimensions (WxDxH) 2,1 x 3,2 x 3,4 m polumschaltbar with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, motoric centralized lubrication

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop Hodjyx Im Aspfx Ab Nefg No foundation pit necessary

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm Hsdpeyx Il Eefx Ab Nofg pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm ram surface 1080 x 900 mm oil volume 1000 l power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm daylight 1200 mm table surface area 1650 x 1250 mm die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l Hfodpev Svb Aefx Ab Nsg power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Hfjdpfxovuk Sbs Ab Njg Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm Hjdpfx Absvuuais Njfg ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m Hjdpfevut Tnjx Ab Nofg with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Hfjdevut Ncopfx Ab Nog Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Hodpfjy Smu Esx Ab Nefg Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 with the sprue picker anvil+long leg Year of construction: 1999 Injection unit: Screw diameter: 40 mm Hfjdpfsy Smulsx Ab Nog Injection weight: 158 g Injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control system with air valve Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of construction: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - clean production conditions Euromap 12 Robot interface Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Hfsdpsy Smt Isfx Ab Nsg Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 with the Wittmann W721 robot Year of construction: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Injection pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Robot Wittmann W721 Year of manufacture: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Hfodpfsy Smtzsx Ab Nsg Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : Hjdpfx Aboy Smths Njfg clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Hfsdpfx Asy Smqmeb Njg Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Hfodpfx Abjy Smn Ss Neg Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm Hfsdpfx Absvuukns Neg power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, Year of construction: 1996, pressure 250 t distance between columns 2100 mm stroke 300 mm Distance table/ram, stroke up 850 mm Table surface area 2000 x 1300 mm Table height above floor 900 mm Side window 1300 mm Ram surface 2000 x 1300 mm Oil volume 1300 l Hfodjvuuidepfx Ab Neg Power capacity 60,0 kW Weight 39,5 t Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary

Condition: used, Year of construction: 2006, pressure 250 t distance between columns 3000 mm stroke 600 mm Distance table/ram, stroke up 900 mm Table surface area 2500 x 1300 mm Table height above floor 1050 mm Side window 1350 mm Ram surface 2500 x 1300 mm Speed down 500 mm/s Speed up 400 mm/s Working speed 36 - 64 mm/s Oil volume 2700 l Power capacity 137,0 kW Weight 54,0 t Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m Hjdpsvuuhaefx Ab Nsfg with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Hfjdpey Smmhefx Ab Nog Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Hfedpfxsy Smive Ab Nsg Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request