Used Haas Vertical Machining Centre for sale (66,878)

Condition: excellent (used), Year of construction: 2007, Mazak Vertical Centre Nexus 510C-II Year of Manufacturer: 2007 Mazatrol Matrix Nexus controller Swarf Conveyor Selection of tooling x10 Renishaw Probe 4th Axix prepped BT40 tooling 30 station magazine 12000 rpm main spindle full set of manuals axis clamps tool length measuring system EIA/Mazatrol programming This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs. Bodpfx Aevyhndsd Ajdb

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant BT40 Tooling Mazatrol 640M control Bdsdpfx Adev Txplj Aob 30 Tool magazine 12,000 rpm main spindle full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, Year of construction: 1982, pulling force - max. 3 t max. ram stroke 1000 mm max. workpiece diameter 200 mm table-size 500 x 220 mm working area 500 x 220 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 50 mm total power requirement 6 kW weight of the machine ca. 1 t Bodoyif Nxjpfx Ad Aedb dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm Bedpfx Adjyif Nle Ajdb table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: excellent (used), Year of construction: 2016, 5-Axis Machining Center Hedelius RS605 K -1200 Control: Heidenhain iTNC530 Year of manufacture: 2016 Internal machine no. 11 Travel paths: X-axis: 1,200 mm Y-axis: 650 mm Z-axis: 520 mm Fixed machine table: X-axis: 570 mm Y-axis: 650 mm Z-axis: 520 mm Number of T-slots: 7 (each 14 mm wide) Feed rate X/Y/Z: 0 – 45 m/min Clamping area: 760 x 600 mm Rotary-swivel table: Clamping area: Ø 520 mm Taper: SK 40 Tool magazine: 30 positions Spindle speed: 50 - 12,000 rpm Accessories: Kinematic Opt Handheld control unit Sieve filter system KM500 ICS 25 bar Bjdpoyk S Sxefx Ad Ajdb Chip conveyor Air blow gun Rinse gun M&H workpiece probe M&H table radio probe prepared

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Bdsdpsy Igbqsfx Ad Aeb

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, spindle speed (max.): 8,100 rpm, spindle motor power: 22 W, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, Travel distances X-axis: 2134 mm Y-axis: 813 mm Z-axis: 762 mm Distance spindle nose – machine table (~ max.): 864 mm Spindle nose to table (~ min): 102 mm Spindle Max. rated power: 22.4 kW Max. speed: 8100 rpm Max. torque: 122.0 Nm at 2000 rpm Table Length: 2134 mm Width: 711 mm Max. table load capacity (evenly distributed): 1814 kg Tool changer 30+1 Bodoy H I S Uopfx Ad Aodb

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Serial Number: A04B-0102-B114#BDH Year of Manufacture: 2013 CNC Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Travel X-Axis: 300 mm Bdsdpfjxflq Asx Ad Aeb Travel Y-Axis: 300 + 100 mm Travel Z-Axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 positions Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF DELIVERY Includes (list not exhaustive): • Fanuc Robodrill α-D21SiA5 Machining Center • 4th Axis Rotary Table • Coolant Pump and Chip Tray • Exact scope as per photo series No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Bdsdpfx Adexflxao Ajb Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: good (used), Year of construction: 2010, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2010 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel X-axis: 300 mm Travel Y-axis: 300 + 100 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Bdjdpfxsxflvfs Ad Aob Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes, among others (list not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa - 4th axis rotary table - Coolant pump and chip tray Exact scope of delivery as per photo documentation No guarantee is given for the correctness, completeness or currency of the information provided.

Condition: good (used), Year of construction: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL SPECIFICATIONS Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2009 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Bjdpfx Adsxflr He Ajdb Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (not limited to): CNC machining center Fanuc Robodrill α-T21iFa Rotary unit for 4th and 5th axis Coolant pump and chip tray Exact scope of delivery according to photo series The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an additional 4th and 5th axis through the integrated rotary unit. This extension enables demanding multi-axis machining applications and significantly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides ideal conditions for precise milling operations with high productivity. The 21-position tool magazine reduces setup times and allows for rapid tool changes. Thanks to its robust construction, a table load capacity of up to 300 kg, and the powerful Fanuc 31i control unit, this machine is perfectly suited for both series production and complex single parts. The integrated coolant system ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: used, Year of construction: 2018, functionality: fully functional, Year of manufacture: 05.06.2018, max. spindle speed: 10,000 rpm, net weight: 3,070 kg, total weight: 3,500 kg, operating hours: machine: 8,678:16 h, spindle: 3,567:18 h, external dimensions: 2,500 x 3,000 x 2,500 mm, equipped with MAX 5 single controller, WinMax software, 1 x 19" LCD color monitor, high-pressure coolant system for through-spindle coolant supply, emulsion coolant, coolant pressure 10 bar, 20-position automatic tool changer. Note: Tools and tool holders are not included in the scope of supply. Integrated hydraulic tool clamping system with workpiece length measurement via probe and tool length calibration via laser, RENISHAW OMP60 workpiece probe system, RENISHAW NC4 laser tool setter system, chip conveyor screw, including digital operating manual on USB stick. Condition note: The machine was never used for hard metals, only for copper. Bodpfx Adey Ht U Is Asdb

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection Bdsdpoy Hp Rrsfx Ad Aob - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: used, Year of construction: 2007, functionality: fully functional, Turning diameter 108 mm Turning length 330 mm Serial number ML 27 108 Turning diameter over the slide 530 mm X-axis travel 210 mm Z-axis travel 310 mm Integrated C-axis Yes Control GE Fanuc Series 18i-TB Tool changer stations 16 Number of tool positions 10 Number of controlled axes 3 Spindle bore 27 mm Spindle speed range 0–8000 rpm Total power requirement 7.5 kW Twin-spindle Turning diameter over bed: 530 mm Turning length: 330 mm X-axis travel: 210 mm Z-axis travel: 310 mm Rapid traverse speed: 30 m/min Spindle speed: 8000 rpm Spindle configuration: A2-4, 5C Spindle bore: 27 mm Turret type: VDI 25 Driven tool speed: max. 6000 rpm Number of turret positions: 16 Control: GE Fanuc Series 18i-TB Includes various tool holders, including 6 driven tool holders Bdsdpfxoy Hqg Ie Ad Aob Note: No tools supplied Bar feeder: BARLOAD Type: Hydrafeed BA 65 Serial number: 16080043 Year of manufacture: 2009 Bar length: 1200 mm Bar diameter: 5–65 mm Bar capacity: 10 pieces (65 mm) Dimensions: 1910 × 1000 × 1250 mm Weight: 320 kg

Condition: used, Year of construction: 2007, functionality: fully functional, Z travel: 460 mm X travel: 635 mm Y travel: 510 mm Bdedpfjy Hqd Tjx Ad Aob CNC control: Siemens 840D - Powerline Table size (L x W): 790 x 560 mm Taper: SK 40 Tool changer positions: 30 Spindle power: 13 kW Spindle torque: 83 Nm Speed range: 10,000 rpm Rapid traverse: 30 m/min Work table: Clamping area: 790 x 560 mm Table load capacity (max.): 600 kg Equipment/Accessories: Chip removal: Chip conveyor Coolant removal: High-pressure through-spindle coolant system with paper belt filter Oil mist extraction: Mechanical separator Setup mode: Electronic handwheel Additional equipment: Air gun Transport dimensions: Machine: 2,800 x 2,000 x 2,700 mm, approx. 4,100 kg Chip conveyor: 3,000 x 1,000 x 1,650 mm, approx. 450 kg Coolant unit: 1,800 x 1,300 x 1,800 mm, approx. 450 kg

Condition: new, Travel X / Y / Z axes: 1020 / 550 / 635 mm Bodpfx Ajy Inuled Ajdb Table size: 1200 x 550 mm Spindle speed: 12,000 rpm Spindle interface: 40 BBT Control: Fanuc 0i MF Plus Dimensions: 480 x 230 x 255 cm Weight: 8,000 kg Equipment: Tool stations: 30 Coolant through spindle 20 bar Air through spindle (must be ordered with CTS) Chip conveyor Chip container Work area chip flushing

Condition: used, functionality: unexamined, Hurco VMX60T vertical machining centre Bdjdpfx Adsy Duv Uj Aeb

Condition: excellent (used), Year of construction: 2001, Control: Heidenhain TNC 410 Worktable Table size: 2030 x 500 mm Travel distances: X-axis: 1700 mm Bdsdpfx Adey Imqxe Aeb Y-axis: 600 mm Z-axis: 600 mm Spindle speed range (stepless): 60 – 6000 rpm Rapid traverse: 25 / 25 / 20 m/min Number of tool stations: 22 tools Dimensions: 4.2 x 2.3 x 2.7 m Machine weight: approx. 10,000 kg

Condition: used, Year of construction: 2008, operating hours: 50,745 h, functionality: limited functionality, machine/vehicle number: 15115223254, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: Siemens, controller model: Siemens 840D, workpiece weight (max.): 2,200 kg, overall weight: 12,000 kg, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho DMF 220 Linear – 3-Axis Machining Center – Used For sale is a used 3-axis machining center, model Deckel Maho DMF 220 Linear. 18,400 spindle hours 50,745 power-on hours The machine was actively used in series production until recently and was mainly employed for machining steel and aluminum. Due to investments in new equipment, the machine will no longer be overhauled and is therefore being sold as is. Condition: The machine is generally operational, but has a spindle defect. The spindle needs to be repaired. Features: - Partition wall for setup time optimization (parallel machining/setup in one half of the enclosure) - Conveyor belt filtration system for coolant processing - Automatic tool changer - Spacious working area for complex components Terms of sale: - Price ex foundation - Transport and loading to be arranged by the buyer - Viewing by appointment only Bjdpfey Hqufex Ad Ajdb Note: The machine was in productive use until a few weeks ago, right up to its decommissioning. Price is negotiable.

Condition: good (used), Year of construction: 1981, max. wheel diameter 650 mm gear width 450 mm Bjdpfsy H Nz Dox Ad Aedb max. module 10 milling head speed 32-256 U/min electrics - voltage/frequency 380/50 V/Hz table load 1,8 t max. milling cutter diameter 192 mm cutter length max. 250 mm milling tool taper SK 40 weight of the machine ca. 11,5 t dimensions of the machine ca. 3,4x1,9x2,3 m

Condition: good (used), max. ram stroke 230 mm throat 230 mm table diameter 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 Bdodew Ny S Repfx Ad Ajb 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 420 mm z-travel 500 mm spindle taper SK 40 table surface area 700 x 400 mm table load capacity 800 kg control Heidenhain TNC 426 rated capacity 40 kVA voltage 400 V weight of the machine ca. 6,5 t dimensions of the machine ca. 3,4 x 3,7 x 2,9 m DECKEL-MAHO machining centres are suitable for manual and automatic operation. --> Area of application MILLING: --> DRILLING: --> Face milling --> Face countersinking --> Circular milling --> Circular drilling --> Screw milling --> Screw drilling Bdjdpfxow Inrve Ad Aob --> Gear milling --> Profile drilling --> Profile milling --> Form drilling --> Form milling --> Including vertical tool changer with double gripper --> Tool magazine, variable space coding (VPC): --> Number of tools: 20 --> Standard tool - max. Ø: 90 mm --> Special tool - max. Ø with free neighbouring spaces: 140 mm --> Max. tool length from spindle nose: 300 mm --> Max. tool weight: 12 kg

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder Bdjdpfx Adeua It Ue Aob - Magnetic chip transport - Year of construction approx. 1976

Condition: used, Year of construction: 2008, control Siemens 840D Bjdpjwzypnefx Ad Aodb

Condition: ready for operation (used), Year of construction: 1998, A CNC vertical machining center Takumi is available. Travel X/Y/Z: 1800mm/850mm/750mm, spindle nose to table distance range: 200mm-950mm, spindle center to column distance: 920mm, table dimensions X/Y: 2000mm/800mm, max. table load: 2200kg, tool holder: NT50, speed: 6000rpm, feed rate: 5m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm, weight: approx. 16500kg, control: Heidenhain, operating hours: approx. 50000h, spindle hours: approx. 25000h. Documentation available. An on-site inspection is possible. Bodpoy H I H Esfx Ad Ajdb