Used Haidenhain Rod 426 for sale (3,269)

Condition: excellent (used), Year of construction: 1989, Oswald T 180 with outfeed conveyor belt Circular cut-off saw for longitudinal cutting of round timber up to 180 mm Lredpfx Akorfxkbjusl

Condition: used, Year of construction: 2024, Three-point linkage Caster wheel 15/6.00-6 (balloon mounted) 1 set of tandem axle / with wheel 16/6.50-8 Hydr. folding swath cloth Set of warning signs with LED / lighting Standard PTO shaft / Lredet Eay Sepfx Akujl

Condition: used, Year of construction: 2022, 1 set of warning signs electr. lighting freewheel PTO shaft 1 set of tandem axle / wheel 16/6.50-8 hydr. folding swath cloth / Lsdpfx Akst Dxppjuorl

Condition: used, Year of construction: 2022, 1 set of warning signs electric lighting 1 set of tandem axle with wheel 16/6.50-8 / hydr. folding swath cloth Standard PTO shaft / Lodpfot Dxpisx Akusrl

Condition: used, Hydraulic Cylinder, Double-Acting Piston diameter: approx. 160 mm Lrsdoxcivdspfx Akuol Piston rod diameter: 100 mm Cylinder stroke: approx. 170 mm Operating pressure: approx. 300 bar Compression force at 300 bar = 60 metric tons - Thread on piston rod - Spherical rod end on cylinder for pin Ø 90 mm Retracted installation length: 850 mm Net weight: 200 kg Cylinder was used for test purposes and is in as-new condition.

Year of construction: 1985, condition: used, machine/vehicle number: 112-176, Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance flat iron ST 37 to approximately 30 x 8 mm -Bending length betw. the rotating units adjustable up to approx. 1000 mm -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW Lrjdpfxoc I Snze Akuol -Weight approx. 150 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Speed: 21,000 rpm MACHINE DETAILS Pneumatics Pressure: 8 bar Lrodpfx Aoxy Hcijkuol Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

Year of construction: 2023, operating hours: 50 h, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of a leasing agreement. Pulsed cleaning laser Narran ROD 500W, equipped with an IPG Photonics source. The machine is in very good condition, with approximately 50 operating hours, used mainly for demonstrations. Technical data: - Average power: 500 W - Peak power: 2.5 MW - Wavelength: 1064–1070 nm - Frequency: 2–50 kHz - Fiber optic cable length: 10 m - Head weight: 1.5 kg - Dimensions: 1.4 x 0.6 x 1.1 m - Device weight: 195 kg Ljdpjx Ezw Uofx Akusrl - Rated power: 3.5 kW - Power supply: 220/230 V (16A) The following accessories are also included: - TBH LN 265 filter – high-performance extraction system with a compact and mobile design; - Extraction fan with hose and nozzles; - 6 pairs of special protective goggles for laser operation; - Interchangeable lenses for the working head; - 3M mask/face shield; - Protective partitions/separators to enclose the workspace; - Manuals in Polish and English, technical documentation (DTR) in Polish, and site-specific instructions; - Domain, website, and e-mail address. The listed price is the sum of the net principal leasing instalments, excluding additional costs, and is for informational purposes only. Offer does not include any transfer fee.

Condition: new, Year of construction: 2025, The 5-axis machine is designed for the industrial machining of aluminium and steel profiles with large volume and weight. The machine is equipped with a 450 mm saw blade. Window construction profiles, special fabrications, façade profiles, and steel profiles are suitable for processing on this machining centre. The frame is made of a welded construction that is mechanically machined. The material thickness of the frame exceeds 14 millimetres to ensure a flat surface and to avoid deformation during transport and/or movement of the machine. The frame is fitted with 12 adjustable steel feet that adapt to any type of flooring, each equipped with rubber pads to prevent the transmission of vibrations to the floor. A movable carriage made from welded steel tubing is mounted on the frame and connected via multiple supports to guarantee maximum stability and to prevent deflection of the support even during demanding operations on steel or other high-strength materials. Lrodpfx Akjxt D Szsusl Machining area X: 7,100 mm Machining area Y: 460 mm (4 axes) Machining area Z: 300 mm Machining axis A: 180° Machining axis C: 360° Maximum speed X: 90 m/min Maximum speed Y: 60 m/min Maximum speed Z: 30 m/min Maximum speed A: 3,600°/min Maximum speed C: 1,800°/min

Condition: new, Year of construction: 2025, The SZ 200 is a 4-axis milling machine designed for a wide range of production processes and precisely tailored to the needs of various industries. It is a unique, reliable, and cost-effective product that optimizes working conditions for operators. The SZ 200 comes equipped with four automatic clamping devices and a high-performance electrospindle. With a power output of 5.6 kW and a speed of 20,000 rpm, it easily handles all production requirements. The machine features comprehensive equipment: enclosure, tool changer, standard clamping system, and tools. The ergonomic control panel, like the entire machine, is extremely compact. Even complex profiles and machining operations can be carried out within a footprint of just 10 m². The tool changer offers 12 tool positions. X-axis travel: 3,010 mm Y-axis travel: 245 mm – 320 mm Z-axis travel: 250 mm A-axis rotation: 180° Ledsxt D R Dopfx Akuerl X-axis max. speed: 55 m/min Y-axis max. speed: 40 m/min Z-axis max. speed: 30 m/min A-axis max. speed: 3,000°/min

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,280 h, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, swivel angle A-axis (max.): 180 °, TECHNICAL DETAILS Max. machining length without end face processing: 4,200 mm Max. machining length with end face processing: 4,080 mm Travel distances X-axis travel: 4,200 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Traverse speeds X-axis traverse speed: 65 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 60 m/min Swivel range A-axis: 0° - 180° Positioning accuracy X-axis positioning accuracy: ± 0.1 mm Y-axis positioning accuracy: ± 0.1 mm Z-axis positioning accuracy: ± 0.1 mm A-axis positioning accuracy: ± 0.1° Ledpfxew Svmis Akujrl Max. spindle speed: 24,000 rpm Spindle rated power: 7 kW S1 Tool holder: HSK-F63 Max. cutter diameter: 80 mm Max. saw blade diameter: 200 mm MACHINE DETAILS Air consumption: approx. 180 l/min Machine weight: 4,200 kg Operating hours Spindle hours: 1,280 h Machine hours: 13,066 h

Year of construction: 2017, condition: excellent (used), functionality: fully functional, FOM Industrie ARGO 70 3-axis CNC machining center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis top only: 6.780 mm X axis top + heads: 6.630 mm Y and Z axis for machining on top and rear side: 545 mm x 295 mm Y and Z axis for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180°. Rotational speed: max. 17.000 rpm profile width: max. 545 mm bar length: max. 6.780 mm Number of milling spindles for aluminum: 1 tool change places: 12 Lrodpfx Aslu E Naekuol POSITIONING AND CLAMPING Clamping devices with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. Number of clamps: 8 MACHINE DETAILS main motor: 6,5 kW total power 8,3 kW speed axis X: 100 m/min EQUIPMENT - Multiple workpiece - Tool clamping system - pendulum operation - Minimum quantity lubrication - Chip discharge conveyor - Rigid tapping - Air cooling - Tool holder - Tool rest with 12 places at the head - Operator terminal with PC - 23" screen - 3D visualization for FomCam

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1000x1350 mm Weight 420 kg Total power requirement 2,7 kw Ljdpfxjvz Hdtj Akuerl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x760x1000 mm Lsdpfx Aksvz Hdmeujrl Weight 250 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x850x1300 mm Weight 420 kg Lodpfx Aevz Hfqjkuorl Total power requirement 4,5 kw

Year of construction: 2024, condition: new, The Rod mill R-BM is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Lrodpfogbubcox Akujl

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Lrodpfjwwtw Dex Akusl Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Condition: good (used), Year of construction: 2004, functionality: fully functional, For sale used KIWA KNH-426 machining centre in excellent condition. Year: 2004 4 axis, 6 pallet station horizontal machining centre with Fanuc Series 18i-M control Ljdpfsugtlpsx Akuorl The machine can be viewed on site by prior arrangement. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: EQWDCOM, type of input current: AC, ZDI Quality Welding Consumables, Wires, Rods TIG Welding, Robotic Welding, Qualified Manufacturer, Quality Guaranteed. Wires, Rods, Stainless Steel, Nickel and Nickel Based Alloys, Strip Cladding. ERNiCrMo-3, ERNiCrMo-4, etc. Lredpfeyaw Haex Akuol

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Ledpoy Nzuhsfx Akusrl Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: used, Year of construction: 2021, operating hours: 247 h, functionality: fully functional, machine/vehicle number: Tecto DC2 BS, input voltage: 400 V, total width: 1,170 mm, total length: 3,750 mm, total height: 1,230 mm, temperature: 2 °C, type of input current: three-phase, cooling capacity: 3,845 kW (5,227.74 HP), ambient temperature (min.): 4 °C, control cabinet height: 1,230 mm, control cabinet length: 3,750 mm, control cabinet width: 1,170 mm, overall weight: 300 kg, Refrigerated counter on 2 levels for displaying refrigerated goods. The bottom level is for wrapped accessories. The top level is for dispalying fresh seafood / meat / cheese / deli. Excellent Italian quality. There are fridge in both levels. Model: Tecto DC2 BS. Cooling requirement: 3845W (for 24/7 use) Color code: RAL7035 / RAL9006 Lredpfx Aoy T Iimokusl Lengt: 3,75 meter Depth: 1,17 meter Hight: 1 meter 23,5 cm Cooling maschine: Split R452a Need electrician, plumber and refrigeration technician to install it.

Condition: good (used), functionality: fully functional, Year of construction: 2022, Electric bending machine in good condition, with automatic back gauge. Specifications: Model: SCHRÖDER MAKU Year: 2022 Made in: Germany Working length: 3,200 mm Bending thickness: 1.5 mm Bending beam tooling: 10 and 25 mm Controller: Classic bend Motor: 2.5 kVA Ljdpjy Ucycofx Akujrl Weight: 2.7 tons If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), SEW WF20 CMP50S/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1896603701.0002X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrodpfx Ajy T Ur Uokuol

Condition: ready for operation (used), SEW WF20 CMP50S/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1896603719.0002X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrodpfx Aey T Utljkuel

Condition: ready for operation (used), SEW WF20 CMP50S/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1896603701.0001X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfx Akoy T Ur Ieuerl