Used Hawe Central Lubrication for sale (9,593)

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, grinding length: 2,500 mm, grinding wheel diameter: 600 mm, grinding diameter: 450 mm, workpiece length between centers: 2,500 mm, grinding wheel width: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025. The following work was carried out: Inspection of the lubrication system and the hydraulic system Geometric alignment of all axes by grinding the table and scraping the guides Replacement of the bearings Inspection of the spindle housing for the workpiece Inspection of the spindle housing for the grinding tool Inspection of the electrical system (conversion from fuse links to new circuit breakers) Installation of a central emergency stop button in the control panel Installation of work area lighting Cleaning of the machine Replacement of the guide covers Installation of a digital axis display for the X-axis Overhaul of the cooling system Honing and replacement of the seals in the cylinder Repair of the valve block TECHNICAL DETAILS Grinding length: 2,500 mm Grinding wheel diameter: 600 mm Grinding diameter: 450 mm Distance between centers: 2,500 mm Workpiece diameter between centers: 450 mm Workpiece length between centers: 2,500 mm Nsdsy Sx Iqjpfx Akuolb Grinding wheel width: 80 mm Feed length Y-axis: 450 mm Feed length Z-axis: 2,700 mm Arbor diameter: 305 mm EQUIPMENT Balancing device for grinding wheels 2 tailstocks Truing device Complete DTR documentation 2 grinding wheels: T1 600x80x305 A98 46K 9V/40 34527331

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") Nljdpfx Akortrx Reusb A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: used, Year of construction: 1988, x-travel 870 mm Nlodpfx Akexlkw Ujusb y-travel 370 mm z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Condition: used, mileage: 540,000 km, power: 279 kW (379.33 HP), first registration: 10/2006, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 8,600 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2006, Equipment: ABS, air conditioning, differential lock, electric window regulation, power assisted steering, = Additional Options and Accessories = - Leaf suspension - Differential lock - Air horn - PTO (Power Take-Off) - Sun visor - Central lubrication system = Further Information = Brakes: Drum brakes Suspension: Leaf suspension Front axle 1: Steered; Left tire tread: 50%; Right tire tread: 50% Nedpfxoy Uypho Akujlb Front axle 2: Steered; Left tire tread: 50%; Right tire tread: 50% Rear axle 1: Twin tires; Differential lock; Left inner tire tread: 50%; Left outer tire tread: 50%; Right inner tire tread: 50%; Right outer tire tread: 50%; Reduction: Outboard planetary axles Rear axle 2: Twin tires; Differential lock; Left inner tire tread: 50%; Left outer tire tread: 50%; Right inner tire tread: 50%; Right outer tire tread: 50%; Reduction: Outboard planetary axles Technical condition: good Visual condition: good Warranty: A/C, steel tipper 20 m³, very good tyres

Condition: excellent (used), mileage: 998,500 km, power: 456 kW (619.99 HP), first registration: 08/2011, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: intarder, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 3,150 mm, Year of construction: 2011, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, parking heater, power assisted steering, power mirror, second fuel tank, = Additional Options and Equipment = - Adaptive cruise control - Rear work lights - Leaf suspension - Differential lock - Speed limiter - Tipping hydraulics - Refrigerator - Air horn - Radio/CD player - Beacon light - Hose assemblies - Sun visor - Auxiliary heater - PTO (power take-off) - Central lubrication system = Additional Information = Suspension: Leaf suspension Front axle: Steerable; Tire tread left: 50%; Tire tread right: 50% Nsdpoy Uyn Djfx Akujlb Rear axle 1: Dual tires; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 50%; Tire tread right outside: 50%; Reduction: Outboard planetary axles Rear axle 2: Dual tires; Differential lock; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 50%; Tire tread right outside: 50%; Reduction: Outboard planetary axles Number of cylinders: 8 Technical condition: very good Visual condition: very good

Condition: good (used), mileage: 581,000 km, power: 304 kW (413.32 HP), first registration: 03/1999, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 8,400 mm, total width: 2,500 mm, total height: 3,050 mm, Year of construction: 1999, Equipment: differential lock, power assisted steering, = Additional Options and Accessories = - Leaf suspension - Air horn - Radio/CD player - Sun visor - Power take-off (PTO) - Central lubrication = Further Information = Technical Specifications Number of cylinders: 6 Gross vehicle weight: 41,000 kg Axle Configuration Suspension: Leaf suspension Front axle 1: Steering; tyre tread left: 40%; tyre tread right: 40% Front axle 2: Steering; tyre tread left: 40%; tyre tread right: 40% Rear axle 1: Twin tyres; differential lock; tyre tread left inner: 40%; tyre tread left outer: 40%; tyre tread right inner: 40%; tyre tread right outer: 40%; reduction: external planetary axles Rear axle 2: Twin tyres; differential lock; tyre tread left inner: 40%; tyre tread left outer: 40%; tyre tread right inner: 40%; tyre tread right outer: 40%; reduction: external planetary axles Condition Technical condition: good Visual condition: good Further Information Please contact Andre, Henri or Andre for more details. Nsdpfx Aoy Uym Hokuslb

Condition: excellent (used), mileage: 1,134,000 km, power: 551 kW (749.15 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2012, Equipment: air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional options and equipment = - Brake booster - Low noise - Speed limiter - Refrigerator - Air suspension - Radio/CD player - Reversing camera - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - PTO (Power Take-Off) - Central lubrication - Towing hitch = Further information = Front axle 1: Steering Front axle 2: Suspension: Air suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steering; Suspension: Air suspension Body brand: HMF Pump: Yes Technical condition: very good Optical condition: very good Nedpfx Akjut Drhjujlb

Condition: excellent (used), mileage: 580,939 km, power: 309 kW (420.12 HP), first registration: 12/2017, fuel type: diesel, tire size: 315/70-R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,990 mm, total width: 2,500 mm, total height: 3,380 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, onboard computer, parking heater, power assisted steering, power mirror, traction control, = Additional Options and Accessories = - 2-pedal control - Aluminum fuel tank - Rear work lights - Front work lights - Leaf spring suspension - Brake booster - Differential lock - High beam headlights - Windshield - Low noise - Speed limiter - Cab - Air conditioning - Alloy wheels - Air suspension - Air-suspended seats - Sleeper cab - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Xenon lighting - Central lubrication system = Notes = Very nice MAN TGS 18.420 4x2, built in 12/2017, with only 580,939 km, automatic transmission, Euro-6 with AdBlue, air conditioning, refrigerator, 1 bed, ADR (EXII, EXIII, FL, AT) valid until 03.08.2026, ALCOA rims, tires 315/70-R22.5 (tread depth: 11 mm, 7/8 mm; H: 12 mm, 7/7 mm), chassis number: WMA08SZZ9JM763248, MAN BrakeMatic, Dutch semi-trailer tractor unit with a valid general inspection (APK) until 03.08.2026. = Further Information = General Information Usable Material: Chemicals License Plate: BD-823-L Technical Information Number of Cylinders: 6 Engine Displacement: 12,419 cc Axle Configuration Tire Size: 315/70-R22.5 Brakes: Disc brakes Front Axle: Alloy rims; Max. axle load: 7100 kg; Steered; Tire tread left: 70%; Tire tread right: 75%; Suspension: Leaf spring suspension Rear Axle: Twin tires; Alloy rims; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 45%; Tire tread right inner: 45%; Tire tread right outer: 45%; Suspension: Air suspension Weights Unladen Weight: 6,913 kg Payload: 11,687 kg GVW: 18,600 kg Maintenance, History and Condition APK (Technical Inspection): valid until 08.2026 Technical Condition: very good Optical Condition: very good Nljdpsy Ui Hvefx Akujb Further Information Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 2014, sheet width 2050 mm plate thickness 6.0 mm ST pre-bending 5.0 mm ST diameter of upper rolls 170 mm side roll diameter 165 mm diameter of lower rolls 135 mm Control SIEMENS oil volume 80.0 Liter voltage 380 V total power requirement 7,5 kW weight 3450 kg Dimensions (only the machine) 3750 x 1170 x 1000 mm very good condition (!!) current new price incl. accessories approx. 70.000 Euro special price on request The FACCIN 4HEL model series is regarded in the industry as one of the most most precise, reliable and productive electronic 4-roll round bending 4-roll round bending machines worldwide. It has been specially designed for high throughput rates and maximum accuracy for medium to heavy sheet thicknesses. Features: - robust electro-hydraulic 4-roll round bending machine * with linear guidance of the rolls * the side rollers move on a straight, diagonal axis . up and down * extremely short distances between the rollers, . which increases the bending quality - 4-roll concept offers a wide range of bending and rounding options - Freely movable control unit * SIEMENS numerical control with touchscreen * Control of all rollers and machine axes * Digital position display of the side rollers * Manual operation possible via electric buttons - Infinitely variable adjustment of the bending speed - top roller and bottom roller with hydraulic motors and planetary gears * active rotary movement = side rollers run freely with - Conical rolling possible by tilting the rollers * Reduction of the maximum material thickness by approx. 50-60 % . during conical bending - Electronic roller parallelism (EPS) - Bending on both sides - diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal - pressure gauge / pressure display for the rollers Nodjy Uy R Sepfx Akuelb - safety device (safety line with switch unit) - Manual central lubrication - operating instructions incl. circuit diagram CE explanation

Condition: used, Year of construction: 1997, Suitable for automatic, double-sided tooth flank grinding on carbide-tipped circular saw blades. Accessories: Total enclosure. Coolant System, Automatic central lubrication, Expansion of diameter range from 80 – 1,430 mm!! Circular sawblade outer diameter: 80 to 1430 mm Circular sawblade bore diameter: 10 - 220 mm sheet thickness: up to 14 mm rake angle: -15° to +40° Radial free angle: -6° to 6° Tangential free angle: up to +8° Grinding path: Max. 30 mm Grinding speed: 0.5 - 20 mm/s Tooth pitch: 6 - 120 mm Grinding wheel diameter: 80 to 125 mm Nedpjy Urwdjfx Akuslb Grinding wheel bore diameter: 32 mm Connected load approx.: 3,6 kW (400 V / 50 Hz) Dimensions W x D x H approx.: 2395 x 1590 x 1970 mm colour: green/grey Weight approx: 1750 kg

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of manufacture: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Speed range: 50 - 2500 rpm - Power: 3.7 / 4.4 kW - Spindle brake Nsdsytb Uhjpfx Akuslb - Auto feed: X-Y-Z infinitely variable 6.3 / 630mm/min - Rapid traverse X-Y-Z 1300mm/min - Fixed angle table - Vertical quill 90mm stroke - Tool holder ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on milling head - Machine books with spare parts list and electrical diagrams

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Deckel FP1 milling machine with Heidenhain TNC113 digital readout in very good condition. Technical specifications: Year of manufacture: 1989 Machine no.: 2102-5533 * Speed: 40 - 2000 rpm * Infinitely variable feed on 3 axes * Rapid traverse on 3 axes * Spindle brake * Table movement X/Y/Z: 300/160/340 mm * Vertical milling head can be adjusted 100 mm on the spindle block * Vertical quill * Drawbar system SK40/M16 * Weight approx. 800 kg Accessories and equipment: Nlsdpfxoytcaro Akujb 3-axis digital readout Heidenhain TNC113 Coolant system Central lubrication Operating manual, spare parts diagram

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) Nsdov Etx Espfx Akuslb * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Njdpfsg Iihwex Akuolb Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST Njdpfsx Sr Dfox Akuolb pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: used, x-travel 1550 mm y-travel 400 mm z-travel 500 mm table-size 1850 x 350 mm spindle taper ISO Sk 50 spindle turning speed range 40 - 1800 U/min total power requirement 7,5 KW weight of the machine ca. 2,8 t dimensions 2,4 x 2,2 x 2,1 m Universal Milling Machine - 3-axis digital readout - Central lubrication system - Coolant system Nledpfxey Umbqe Akuob - Machine lamp - Machine leveling feet - Chip guard - Emergency stop device - Mobile workbench incl. tools

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 10,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,515 mm, power: 160 kW (217.54 HP), drive type: Diesel, Diesel Forklift Load center: 600 mm Mast type: Duplex Transmission: Torque converter Nlodjw Iirwepfx Akujb Condition: New Technical condition: New Front tires type: Pneumatic Front tires condition: New Rear tires type: Pneumatic Rear tires condition: New Sideshift, fork positioner, 3rd valve, 4th valve, - Pressure accumulator for the lifting hydraulics - Hydraulic oil cooler with fan - 2 extra LED work lights on the mast below the standard headlights - Red-zone light left and right - 2 blue safety lights on the mast - 1 blue safety light on the cab roof, activated via reverse gear - Automatic central lubrication system - Wheel nut protection on the steering axle - 2 rearview mirrors mounted on the front wheel fenders - Reverse camera with pedestrian detection from Ark-Vision, camera mounted on cab roof to also cover steering axle lock angle

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Njdpfx Aoyrhcpjkuelb Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: excellent (used), Machining Centre HOLZ-HER EVOLUTION 7405 -used- Continuous feed machining, 4-sided edge routing possible, integrated vacuum pump, automatic positioning of suction cups, hardened, dust-protected prism guides, ball screw drives on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, manual control device, XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, automatic central lubrication. ----- Technical Specifications ----- Min. workpiece length X: 200 mm, Min. workpiece width Y: 70 mm, Min. workpiece thickness: 8 mm, Max. workpiece length X: 3,200 mm, Max. workpiece width Y: 920 mm, Nlsdpfeyrp Srex Akujb Max. workpiece thickness: 70 mm, Machine control software: CAMOUS HOPS, Main spindle motor power: 6.5 kW, Main spindle speed: 1,000 - 18,000 rpm, Main spindle interface: HSK-F63, Drilling unit motor power: 1.7 kW, Drill spindle interface: M10, H7 fit 11 mm, Number of vertical drilling spindles: 13 pcs, Number of horizontal double drill spindles in X direction: 2 pcs, Number of horizontal double drill spindles in Y direction: 1 pc, Saw blade diameter (saw unit): 120 mm, Number of tools in changer: 6 pcs, Extraction port diameter: 2 x 120mm + 1 x 140 mm, Required air flow rate: 4,100 m³/h, Required static vacuum: 2,500 - 3,000 Pa, Required air velocity: 30 m/s, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min. Quality information: - complete basic cleaning - electrics checked - pneumatics checked - set according to manufacturer’s specifications - ready for immediate use

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Nodpfsy Eylwox Akujlb Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, New grooving saw blade, Clamex option available, Door processing option available ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked - Set according to manufacturer's specifications - Immediately ready for operation

Condition: good (used), mileage: 852,438 km, power: 324 kW (440.52 HP), first registration: 02/2012, fuel type: diesel, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 10,516 l, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, central locking, cruise control, differential lock, electric window regulation, onboard computer, traction control, = Additional Options and Accessories = Nlsdey Ua Rrepfx Akuob - Aluminum fuel tank - Differential lock - Central lubrication system = Further Information = Transmission: ZF, automatic Unladen weight: 7,360 kg Payload: 11,640 kg GVWR: 19,000 kg Cargo volume: 700 l Please contact Vitali Lenda for further information.

Condition: good (used), Year of construction: 2022, QUASER UX 500 C 5-Axis Universal Machining Center Year of manufacture: 2022 Control system: SIEMENS S828D Travel distances: X – 712 mm / Y – 508 mm / Z – 515 mm A-axis (swivel axis): +30/-120° C-axis (rotational axis): 360° ONLY approx. 1,500 spindle hours (as of March 25, 2026) Equipment: SIEMENS S828D / PPU 290 with 15-inch touchscreen and movable control panel, tiltable and rotatable Software option: 3D simulation Software option: Network drive management including temperature-controlled cooling system Portable electronic handwheel Heat exchanger for control cabinet system Dual-arm tool changer with 48 storage locations Pneumatically operated tool change door High-precision option: glass scales in X/Y/Z including overpressure system to prevent contamination Direct path measuring system in the rotary axis Direct path measuring system in the swivel axis Main spindle: SIEMENS SK40 with 12,000 rpm, 13.3 kW / 85 Nm (S6-25%) coupled, SC-4.2 including temperature-controlled cooling system including internal coolant supply with Grundfos pump, 20 bar, 25 l/min including cartridge filter 25 µm Infrared receiver for workpiece and tool measurement 3D infrared probe RENISHAW OMP 40-2 for workpiece measurement, including software option for in-process measurement cycles Tool setter OTS for tool measurement, including quick-change adapter Software option: Kinematics measurement cycle 996 Software option: Measurement cycles for workpiece control and measurement / automatic operation Three-color signal light Cartridge filter for ring cooling and chip flushing Coolant spray gun Rotary through spindle Deublin External compressed air for dry machining Additional compressed air can be switched on through the spindle via M-function Automatic hybrid central lubrication for guides and ball screws Scraper conveyor for universal applications, short to medium-length chips Chip disposal system, consisting of work area chip flushing with Grundfos pump 75 l/min at 3 bar Chip augers made of stainless steel and 2 screw conveyors in the work area Full work area protection with 2 hinged viewing doors 2 work area lights Flood cooling with 10 outlets arranged in a ring around the spindle nose, via Grundfos pump, 75 l/min at 3 bar Warm-up tool Spindle cooling oil Mobil Velocite Oil No. 3 Included in delivery: Spring-loaded 2-jaw power chuck, manufacturer SCHUNK Model KSF3-250 approx. 70 tool holders, some with tools installed Chip cart Operating manual/documentation Machine parameters on USB stick Technical data, transport & manufacturer's brochure – see PDF. All technical data, images and content are non-binding and without guarantee. Subject to change, errors and omissions. Nlsdpfxey Uhcpo Akuob All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Truck) D-32457 Porta Westfalica packaging only Delivery time: immediate Subject to prior sale / Payment immediately upon completion of purchase.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 Profit H350 1630 was manufactured in 2018. It features a robust construction with a heavy-duty welded steel frame and dual-driven moving gantry. The machine offers an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. If you are looking to get high-quality CNC machining capabilities, consider the FORMAT4 Profit H350 1630 CNC processing center we have for sale. Contact us for further details. • Working hours: 6,442 h • Condition: Not rebuilt – without warrantyGeneral • Construction: Heavy-duty welded steel frame, reinforced • Gantry: Dual-driven moving gantry • 5-axis simultaneous machining • Control software: WoodFlash CNC • Remote service package via internet connectionWorking area and axes • Working area: X 3000 mm / Y 1550 mm / Z clearance 250 mm • Drives: X helical rack & pinion; Y/Z precision ball screws Njdpfxjy Uyihe Akujlb • Guideways: Linear on all axes • Lubrication: Automatic central systemMain spindle (5-axis electrospindle) • Type: Cardan-joint 5-axis spindle, right-hand rotation • Power: 12 kW (S6), full power around 12,000 rpm • Speed: 1,000–24,000 rpm • Tool interface: HSK F63 • Cooling: Liquid cooling; ceramic bearings with air cooling • Integrated aggregate holder; electrically controlled extraction hood • Max tool weight: 6 kg • Max saw blade diameter: 350 mmTool magazines • Linear magazine: 12 positions, left side of frame; separate aggregate pickup; max tool Ø 250 mm; max tool length 240 mm • Rotary disc magazine: 18 positions on moving gantry; supports drills and aggregates; max tool Ø 250 mm; max tool length 280 mmDrilling unit (DH18 6H 1S) • Vertical spindles: 12 total (7 in X, 5 in Y) • Horizontal spindles: 6 total (4 in X, 2 in Y) • Drilling stroke/depth: up to 70 mm; tool holder size 10 mm; individually controlled spindles • Integrated grooving saw: Ø 120 mm; max body thickness 5 mm; up to 7,500 rpmVacuum and clamping • Console table: 6 consoles with front/rear stops; wireless dual-circuit vacuum; vacuum cup height 100 mm • Pneumatic console locking; programmable pneumatic stops; 4 movable side stops • Reinforced support arms (40 kg each) • Vacuum pump capacity: 90 m³/h @50 Hz; 108 m³/h @60 Hz • Additional vacuum connection for template work • Controlled compressed air for frame clamps • Independent vacuum/air switching per consoleCNC software and control • WoodFlash package: CNC control, tool database (Tecno Manager), program editor, 3D preview, DXF import, CAD functions (rotate/mirror/scale/copy), engraving, pocket milling, parametric and absolute/incremental programming, machining optimization • CNC control panel: Full machine operation, program creation/editing, tool/workpiece management, manual commands, vacuum/air/safety monitoring • Mobile operator terminal: 24" LED monitor, keyboard, mouse, USB • Feed speed control terminal: Manual feed override potentiometer; variable feed during machiningSafety • CE safety system; safety mats (instead of light curtain) • Emergency stop system • Safety fence on left side; door safety monitoring • Vacuum and compressed air monitoring sensors Additional equipment • External enable switch • Protected cable chain system • Additional A and C axis locking system • Tool service kit • Polish software installation package • Polish operating manual • Saw blade changing station on gantry

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 PROFIT H350 16.30 CNC processing center was manufactured in 2017. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. The machine is equipped with a powerful 12 kW spindle and a dual-driven gantry system, ensuring high precision and efficiency. If you are looking to get high-quality machining capabilities, consider the FORMAT4 PROFIT H350 16.30 machine we have for sale. Contact us for further details. • Working hours: 9,370 h • Construction: Heavy-duty welded steel frame; dual-driven moving gantry • Power/Electrics: 3x400 V, 50–60 Hz • CNC software: WoodFlash suite (control panel, tool database, program editor, 2D simulator, 3D preview, DXF import, CAD functions, parametric/absolute/incremental programming, pocket milling, engraving, sequence optimization, virtual planes, subprograms) • Controls and operator interface: • CNC panel for full machine control • Mobile operator terminal with 24" LED monitor, keyboard/mouse, USB • Handheld feed control (feed override, E-stop, manual feed) • Working area and travels: • Working area: X 3000 mm, Y 1550 mm • Z clearance height: 150 mm • Main spindle (5-axis): • 5-axis electrospindle with Cardan joint, liquid cooled, ceramic bearings, R/L rotation • Power 12 kW (S6), 1,000–24,000 rpm • Tool holder HSK F63 • Max tool weight 6 kg; max saw blade Ø 350 mm • Integrated aggregate holder; electrically controlled extraction hood • Axis and motion system: • Dual-driven gantry • X: helical rack & pinion, hardened linear guides • Y: ball screw, hardened linear guides • Z: ball screw, hardened linear guides • Automatic central lubrication • Tool magazines: • Linear: 12 positions, aggregate pickup; max tool Ø 250 mm, length 240 mm • Rotary (on gantry): 18 positions; max tool Ø 250 mm, length 280 mm • Saw blade pickup station: max blade Ø 350 mm • Drilling and grooving: • DH18 6H 2S drilling head: • 12 vertical spindles (7X / 5Y), 6 horizontal spindles (4X / 2Y) • Drill stroke/length max 70 mm; tool holder Ø 10 mm; individually driven • Grooving saws: 2 blades (1X / 1Y), max Ø 120 mm, body thickness max 5 mm, up to 6,000 rpm • Vacuum and clamping: • Console table with 6 consoles; front/rear programmable stops • Wireless dual-circuit vacuum system; cup height 100 mm • Pneumatic console locking; 4 movable side stops; additional support arms • Vacuum pump capacity: 90 m³/h @50 Hz, 108 m³/h @60 Hz • Additional vacuum equipment: left/right template connections; controlled compressed air for frame clamps; independent vacuum/air control per console • Safety: • CE safety system, light curtain, emergency stop system • Safety fence on left side, door safety monitoring • Vacuum and compressed air sensors • Additional safety mat system Additional equipment • Additional A-axis and C-axis mechanical locking system • Remote service package via internet • Cabinet body generator software (3D cabinet design package) • Service tool kit • Documentation: Polish manuals; WoodFlash installation manual • Additional support arms for consoles Nodjy Ux Upopfx Akuslb • Included accessories: • 11 vacuum cups FA 140 × 115 × 100 mm • 4 vacuum cups FA 125 × 75 × 100 mmNote: Technical data provided for information only and not binding.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 420 mm, number of axes: 5, controller manufacturer: SIEMENS, controller model: Siemens 840D sl / PCU 50 with NCU 730, spindle motor power: 26,000 W, spindle speed (max.): 24,000 rpm, This 5-axis MAKA PM 270 X CNC processing center was manufactured in 2012. It features an impressive X-axis travel of 9000 mm and Y-axis travel of 2700 mm, designed for workpiece thicknesses up to 60 mm. The machine includes a powerful milling spindle with adjustable speeds up to 24,000 rpm and a tool magazine with 32 positions for efficient tool changes. If you are looking to get high-quality milling and drilling capabilities, consider the MAKA PM 270 X machine we have for sale. Contact us for further details. • CNC control: Siemens 840D sl / PCU 50 with NCU 730; OP 15 control panel with 15" display on a guide rail along the longitudinal axis • Working area / machinable cube (with tool L/D 160 mm): • X: 9000 mm (with both gantries) • Y: 2700 mm • Z: standard cube size 420 mm • Custom-designed for workpiece thicknesses up to 60 mm • 5-axis unit • Portal 1: • Universal 5-axis milling unit • Spindle power: 20/26 kW (S1/S6) • Speed: up to 24,000 rpm, water-cooled • Tool interface: HSK F63, automatic tool change • Thread cutting possible • Chain tool magazine: 32 positions with rotary gripper; fixed on operator side • Portal 2: • 2 unit mounting consoles, each with 2 heavy-duty multi-spindle drilling units • Shared exhaust hood • 13 drilling spindles per unit (26 total), individually selectable vertically, L-shaped arrangement • 2 inclined drilling spindles adjustable 0–25° forward (1 right, 1 left), approx. 2.2 kW each, 2800 rpm • Drill chuck: Rego Fix ER 25 M • Machine table: • Base frame with linear guide • 12 table crossbeams on linear guides for X-positioning, each NC-driven and positionable • Vacuum supply integrated into the crossbeams • Each crossbeam individually vacuum-monitored and linked to machine control • Installation requirement: Foundation recess approx. 300 mm • Workplace safety: • Traveling safety cabin on both gantries • Safety bumpers and safety light curtain system on operator side and rear Additional equipment • Workpiece feed system: 1 belt conveyor with 4 belt strands (40 mm width each); each crossbeam with NC-controlled lifting device; stroke 110 mm mm) Nodpfx Aoy Uwrgokuolb • Vacuum system: Bush vacuum pump type Mink MM 1322, suction capacity 250 m³/h, with 500-liter intermediate tank for rapid vacuum build-up • Chip handling: 2 chip conveyor belts under the machining area (for chips/small waste up to 100 x 100 x 100 mm) • Automatic central lubrication system