Used Helmet Guard for sale (3,669)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,530 h, load capacity: 1,500 kg, lifting height: 3,750 mm, fuel type: electric, mast type: telescopic, construction height: 2,300 mm, battery capacity: 805 Ah, battery voltage: 24 V, fork length: 1,100 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,097 kg, total height: 2,300 mm, total length: 1,850 mm, total width: 1,050 mm, fuel: electricity, Equipment: sideshift, LINDE E 15 Z-02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 3.750 mm Closed height: 2.300 mm Mast: Standard (2W375) Fork length: 1.100 mm Fork carriage: 2A Drive: Elektro 24V Battery: 24 V 805 Ah v. 2022 Charger: Einphasig 24 V 50 A not tested Tyres: Superelastik SE 18 x 7 - 8 (60%) / 15 x 4,5 - 8 (0%) Service weight: 3.097 kg Length: 1.850 mm Width: 1.050 mm Year of manufacture: 2006 Operating hours: 3.530 h Condition: working condition Nwjdpfx Aoz Aqpxsgrjl EQUIPMENT 3rd valve, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309228 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 13,447 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,248 kg, total height: 2,121 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, LINDE E 16-02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.620 mm Closed height: 2.121 mm Free lift: 1.480 mm Mast: Triplex (3F462) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah Charger: Dreiphasig 48 V 75 A not tested Tyres: Superelastik SE 18 x 7 - 8 (90%) / 15 x 4,5 - 8 (50%) Service weight: 3.248 kg Nedpfx Agoz Aqp Esrowl Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2021 Operating hours: 13.447 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309227 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,985 h, load capacity: 1,800 kg, lifting height: 4,650 mm, fuel type: electric, mast type: telescopic, construction height: 2,850 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 140/55 - 9, overall weight: 3,669 kg, total height: 2,850 mm, total length: 1,950 mm, total width: 1,200 mm, fuel: electricity, Equipment: sideshift, LINDE E 18-02 EVO / 386 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.650 mm Closed height: 2.850 mm Mast: Standard (2W465) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah v. 2018 Charger: 48 V 70 A not tested Tyres: Superelastik 200/50 - 10 %) Service weight: 3.669 kg Length: 1.950 mm Width: 1.200 mm Year of manufacture: 2018 Operating hours: 3.985 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Nwjdsz Apu Hopfx Agrsl Internal no.: 1308893 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,037 h, load capacity: 2,000 kg, lifting height: 3,770 mm, fuel type: diesel, mast type: telescopic, construction height: 2,350 mm, motor manufacturer: Yanmar, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 6.50 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,300 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 1,070 mm, fuel: diesel, motor model: 4TNE 92 NMHA, Equipment: sideshift, YALE GDP 20 SVX V2425 – Diesel forklifts TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 3.770 mm Closed height: 2.350 mm Mast: Standard (2W377) Fork length: 1.200 mm Fork carriage: 2A Drive: 4-Zyl.-Diesel Engine: Yanmar 4TNE 92 NMHA Tyres: Superelastik SE 6.50 - 10 (40%) / 18 x 7 - 8 (30%) Service weight: 3.300 kg Length: 2.300 mm Width: 1.070 mm Year of manufacture: 2013 Operating hours: 9.037 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Nwedez Aqprspfx Agrol Internal no.: 1102803 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,208 h, load capacity: 5,000 kg, lifting height: 2,780 mm, fuel type: gas, mast type: telescopic, construction height: 2,250 mm, motor manufacturer: VW, gearing type: other, fork length: 150,602,400 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 250-15, overall weight: 7,135 kg, total height: 2,250 mm, total length: 3,200 mm, total width: 1,550 mm, fuel: liquid petroleum gas (LPG), motor model: CHT, Equipment: sideshift, STILL RX 70-50 T-600 /2018 – LPG forklifts TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 2.780 mm Closed height: 2.250 mm Mast: Standard (2W278) Fork length: 150.602.400 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW CHT Transmission: elektrisch Tyres: Superelastik SE 355/50-15 (80%) / 250-15 (60%) Nsdpfsz Ap S Sex Agrjwl Service weight: 7.135 kg Length: 3.200 mm Width: 1.550 mm Year of manufacture: 2018 Operating hours: 10.208 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Rental truck – Rental price on request. Internal no.: 1201898 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, mileage: 123,363 km, power: 205 kW (278.72 HP), first registration: 05/2024, fuel type: diesel, overall weight: 15,990 kg, axle configuration: 4x2, wheelbase: 5,175 mm, color: other, driver cabin: other, gearing type: automatic, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, low noise, traction control, trailer coupling, Maximum permissible total weight: 15,990 kg, Fabric seats, Air suspension, Low noise level: ECE 92/97, Electronic Stability Program (ESP), Anti-slip regulation (ASR), Comfortable driver's seat, Air-suspended driver's seat, Passenger bench for 2 people, Digital radio receiver (DAB), Multifunction display, Bluetooth audio streaming, Bluetooth mobile phone preparation, Lane departure warning, Electric windows, Electrically adjustable and heated mirrors, Immobilizer, Central locking with remote control, Anti-theft bar: Front, Twin tires, Spare wheel, LED daytime running lights, 1x15-pin socket, Speed limiter: 90 km/h, Voltage converter, Automatic Emergency Braking System (AEBS), Splash guard, FMS data interface, R/S 15-pole connector, D120KN crossbeam, Towing hitch adjustment, 24/12V-10.5A converter, Clothes rail, FMS data interface, R/S 15-pole connector, D120KN crossbeam, Towing hitch adjustment, 24/12V-10.5A converter, Clothes rail, INDUSTRIAL VEHICLES Iveco Eurocargo 140E28 / Alloy box van COLOR: WHITE YEAR: 2024-05 KM: 123,363 GVWR: 15,990 DISPLACEMENT: 6.728 Euro 6 FUEL: DIESEL Nwodpfx Asz D Ngvsgrsl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,208 h, load capacity: 1,800 kg, lifting height: 3,300 mm, free lift: 1,550 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 15 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,497 kg, total height: 2,150 mm, total length: 2,000 mm, total width: 1,120 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 218 GE120-330ZZ – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 3.300 mm Closed height: 2.150 mm Free lift: 1.550 mm Mast: Duplex (2F330) Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 750 Ah v. 2016 Charger: ohne/without Tyres: Superelastik 200/50 - 10 (15 %) / 15 x 4,5 - 8 (0%) Service weight: 3.497 kg Length: 2.000 mm Nwedpfx Ajz Apqzogrjl Width: 1.120 mm Year of manufacture: 2016 Operating hours: 14.208 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Internal no.: 1308609 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, Year of construction: 2026, The CORMAK PT310ET planer–thicknesser is an advanced woodworking machine that combines the functionality of a jointer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and features that increase precision and operator comfort, such as additional feed rollers integrated into the thicknessing table. Key Advantages S6 motor power: 2.8 kW (S1: 2.2 kW) – one of the most powerful in its class, ensuring consistent performance even under heavy loads. Stable 180 kg construction – rigid cast-iron tables and additional rubber-coated feet minimize vibrations and increase precision. Quick mode switching – fast change from jointer to thicknesser by lifting the tables and repositioning the chip-extraction hood. Smooth and quiet operation – low noise emission and accurate material feed ensure operator comfort and safety. Efficient extraction system – Ø120 mm outlet allows effective chip removal, especially during intensive use. Unique Benefit: Feed Rollers in the Thicknesser – specially designed auxiliary roller extensions integrated into the thicknessing table support the machining of long and heavy workpieces, making feeding and collecting easier while improving surface finish quality. Applications Carpentry and furniture workshops – for daily, efficient machining of solid wood and laminated boards. Production of structural components – ideal for flattening and calibrating construction elements, stairs, frames, and mouldings. Technical schools – for training in professional woodworking using high-quality industrial equipment. Standard Equipment Three HSS knives, 310 × 25 × 3 mm Cutterhead guard Cast-iron jointer tables Ø120 mm dust-extraction outlet Feed switch and emergency STOP switch Nwjdpfexy Hy Uex Agrsl Operating manual (DTR) CE declaration of conformity Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 5500 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives / dimensions: 3 / 310 × 25 × 3 mm Maximum jointer width: 310 mm Maximum thicknesser width: 308 mm Planing height range: 5–225 mm Maximum depth of cut (thicknesser): 2.5 mm Maximum depth of cut (jointer): 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L × W): 1300 × 310 mm Gross weight: 180 kg Motor speed: 2800 rpm Motor power: S1: 2.2 kW / S6: 2.8 kW Power supply: 400 V, 5-pin socket, 16 A Manual (DTR): Polish/ English CE declaration: yes

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 004/2017, The line (multi-purpose automatic machine) is designed for the automatic straightening and cutting of uncoiled flat and metal strip and coil into sheets of various dimensions, with a simultaneous stacking system. The machine was manufactured in Poland in 2017. Main technical and operational parameters of the line: 1. Overall external dimensions of the entire line: total length – 1230 cm, maximum height – 180/260 cm, maximum width – 320 cm, 2. Length/width/height: receiving table – 400 cm, 130 cm, 87 cm; feeding table – 400 cm, 150 cm, 87 cm. 3. Power supply: electrical 3 x 400V/50Hz 4. Flat sheet parameters – thickness 0.5 mm – 2.0 mm / width – max 1500 mm, perforated sheet parameters – thickness up to 3 mm, width – max 1500 mm. 5. Uncoiling, straightening, and cutting speed – automatically controlled. Nwsdpfjz Eafxjx Agrel 6. Max. Load – 5000 kg (5T) [spindle carriage]. Machine construction: 1. Rail carriage, 2. Coil unwinder – for strip and coil, 3. Straightener with adjustable straightening gap, 4. Guillotine shears – for transverse cutting of the strip into sheets, 5. Stacker (trap) for preliminary collection of sheet metal, 6. Wheel-and-spindle carriage for packaging sheet metal, 7. Control cabinet – integrated electrical and electronic systems for power supply, programming, and control. 8. Adjustable control panel with a visual touch screen. 9. Safety devices – guards, emergency stop switches, wire circuit with limit switch, distinctive colors. The construction of the machines that make up the line is based on a monolithic, compact frame and table structure made of steel profiles, angles, closed profiles, flat bars, bracing, and sheet metal cladding. The components are joined by longitudinal, butt, and lap welding, as well as by detachable bolted connections. The machine has been used very little (a few dozen operating hours) due to a change in production plans. It is in perfect condition. The stated price is the net price.

Condition: new, Year of construction: 2026, CORMAK SM75 Belt Grinder is a high-performance industrial metal belt grinding machine designed for precise, fast, and safe grinding of steel and metal components. Thanks to its two-speed operation and wide vibration-damping base, the SM75 stationary belt grinder is ideal for single-piece production, series production, and workshop applications requiring a large contact surface with the material. Its simple design ensures easy operation, while the robust construction guarantees long service life even under intensive working conditions. Main advantages of the machine Two-speed abrasive belt operation – 14.5 / 29 m/s – allows adjustment of the working mode to the type of material and the required process (rough grinding or precision finishing). 3 kW / 400 V motor – ensures smooth and stable operation even under heavy loads. Large grinding surface – a 75 mm wide belt and a contact wheel measuring 250 × 150 mm enable efficient work with large components. Belt grinder with quick belt tensioning system – the spring-loaded mechanism automatically maintains the correct belt tension, improving operator comfort. Adjustable grinding head angle – enables quick adaptation of the machine setup to specific machining tasks. Stable, vibration-free construction – the wide cast-iron base eliminates vibrations and improves the quality of the finished surface. Two dust extraction ports – efficiently remove grinding dust, improving workplace safety and cleanliness. Design and technology Nedsvu Uhajpfx Agrowl The CORMAK SM75 metal belt grinder is built on a highly rigid frame construction that ensures stability and precise belt tracking even under maximum pressure. The high machine weight (72 kg) and low center of gravity further reduce vibrations during operation. The belt tensioning and guiding system, based on bearing-mounted rollers, allows quick replacement of abrasive belts without the need for additional tools. The graphite coating under the belt reduces friction, improving both grinding quality and abrasive belt durability. Precision and work efficiency The two-speed belt adjustment allows the operator to match the grinding speed to the type of workpiece and the required surface finish. The CORMAK SM75 stationary belt grinder is suitable for both aggressive material removal and precise edge finishing. The integrated dust extraction system and ergonomic work table provide a clean working environment and stable support for the processed material. Applications The machine is suitable for: grinding edges, curves, and weld seams, processing structural steel, stainless steel, and aluminium, metalworking workshops and tool rooms, single-piece and series production, preparing surfaces for painting or welding. Standard equipment Abrasive belt 2000 × 75 mm Adjustable grinding table Eye protection guard Graphite backing plate under the belt Belt tensioning roller Cast-iron base Motor safety switch Dual dust extraction ports Technical specifications Parameter Value Abrasive belt dimensions (L × W) 2000 × 75 mm Contact wheel surface (W × D) 250 × 150 mm Belt speed 14.5 / 29 m/s Motor power 3 kW / 400 V Weight 72 kg Overall dimensions (L × W × H) 1070 × 560 × 980 mm

Condition: used, mileage: 231,540 km, power: 316 kW (429.64 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Well-maintained MAN TGS 26.430 with approx. 6.10 m platform body for scaffolding/timber construction, with ADR for gas transport, 6x2/4 drive with steered front axle, air-suspended rear axles, wheelbase 3.15m, GVWR 16.4 tonnes, 430 hp, trailer hitch, automatic transmission, mounting for forklift attachment at the rear, air conditioning, navigation system, cruise control, engine brake with 3 levels, from first owner, in excellent condition, and more. M cab, medium length with rear protective grille Euro 6 D engine with 430 hp and 2,200 Nm of torque 6x2/4 drive with LOL-08 steered, liftable front axle Unladen weight 9,535 kg Payload 16,465 kg Differential locks in rear axle Wheelbase 3,150 mm + 1,350 mm Special platform with all-round perforated rails for load securing Platform body approx. 6.10 m long and approx. 2.55 m wide, front wall approx. 1.20 meters high Mounting for a forklift at the rear Wiring for tank trucks according to ADR Dangerous goods equipment according to ADR type AT ADR inspection and certificate MAN TipMatic12 26 DD transmission MAN EasyStart with TipMatic MAN BrakeMatic ABS, ASR, ESP Disc brakes for front and rear axles Controlled rocker arm brake (EVBec) Engine brake with 3 levels Emergency Brake Assist 2 (EBA2) MAN Lane-Guard System IV Njdpfx Aez D N T Aegrswl Front axle leaf-sprung, rear axles air-suspended Front axle VOK-09 curved, rear axle hypoid HY-1350 Front axle load 7,500 kg, rear axle load 11,500 kg Stabilizer bar for front and rear axles HY axle ratio i=2.71 Trailer hitch Rockinger Type 400 G 150 A with air connections Duo-Matic quick coupling at the rear Trailer load with continuous braking system 26,470 kg Trailer load with SDAH/ZANH 16,000 kg Gross vehicle weight 44,000 kg Air conditioning Cruise control Sun visor 2 plastic storage boxes outside left + right Electrically adjustable and heated exterior mirrors Electric windows Dust box in the cab Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Radio MAN Media Truck Advanced 12 V with 7" color display MAN Navigation Hands-free functionality "Comfort" for 2 mobile phones German vehicle from first owner Very good and well-maintained condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2621

Condition: used, functionality: fully functional, machine/vehicle number: WMA10XZZ5KM816084, mileage: 572,010 km, power: 427 kW (580.56 HP), first registration: 02/2019, fuel type: diesel, empty load weight: 8,170 kg, maximum load weight: 9,830 kg, overall weight: 18,000 kg, tire size: 385/55 + 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 06/2027, fuel: diesel, fuel tank capacity: 490 l, brakes: intarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, navigation system, parking air conditioner, parking heater, seat heater, traction control, our vehicle number #31031 XXL cab Euro VI 580 hp 4x2 Wheelbase 3,600 mm Intarder Full air suspension Tire size A1 385/55 + A2 315/70 R 22.5 Nwedpfez Apikjx Agrsl Tank capacity 490 liters Color: silver Saddle height 1,150 mm Aluminum rims Differential lock TipMatic transmission Double hydraulic tipping system, Padoan Air conditioning Disc brakes Auxiliary heater Cruise control Traction control Full spoiler 2 bunks Driver's climate comfort seat/heated Co-driver's comfort seat/heated Electric windows, 2-way Auxiliary air conditioning MAN BrakeMatic MAN EasyStart MAN Media System Advanced including navigation system Lane Guard System IV ACC adaptive cruise control ESS emergency braking signal Emergency Brake Assist 2 ESP Fog lights Cornering lights Turning lights LED daytime running lights Central locking with remote control Sound system Cooler box Electric sun blind Rain sensor On-board computer Multi-function steering wheel ABS Xenon headlights Rio box Sun visor Roller blind, left Albrecht radio Lamp bracket with additional spotlights Air horns Front + side exhaust pipes Efficient Cruise Financing available upon request!!!

Condition: new, power: 427 kW (580.56 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-sprung seats - Air horn - Metallic paint - Particulate filter - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cabin - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Auxiliary heating system - Toolbox - Windshield Internal number for customer inquiries: 4-185 Chassis in stock -> Ready-to-use vehicle with timber platform body and loading crane from our stock selection within 3 weeks!!! MAN TGX 26.580 6x4 BL with short timber body & timber loading crane according to your specifications or from stock! Vehicle description: * Cab GM: the spacious (wide, long, medium height) * LED headlights * LED daytime running lights, fog lights, position lights and tail lights * Stone guard for headlights, coarse mesh * Protective roof for rear lights * Suspension leaf spring/air * Drive 6x4 * Wheelbase 4,500 mm + 1,350 mm * Tire size front 385/65R22.5, rear 315/80R22.5, trailer 315/80R22.5 * Engine D3876LF11 - 580 hp / 427 kW EURO 6d SCR 2900 Nm * MAN TipMatic 1230 OD, with retarder 35 * Differential lock in rear axle * Fuel tank aluminum 390l + 80l AdBlue * Trailer coupling ROCKINGER 500 G 6A * Central locking with remote control * Glass sunroof, electric * All exterior mirrors electrically adjustable and heated * Additional cab insulation, thermal and acoustic * Auxiliary heater * Air conditioning, Climatronic * Digital axle load display (ALM) in the cab for air-sprung axles * Display in instrument panel for trailer data (axle load) * Cool box under bunk, fully retractable * MAN EasyControl control panel, 4 functions, can be operated from the outside when the door is open: work lights, auxiliary drive, engine start/stop and hazard warning lights * High-performance engine brake MAN EVBec, steppable * MAN EasyStart hill start assist Nsdpfx Ajzik Uzsgrewl * Driver and co-driver comfort seats, air-sprung, with lumbar support, shoulder adjustment, heating and seat ventilation * Multifunction steering wheel, leather, adjustable height and tilt, with parking position * Front cooler protection, grid * Bumper, steel, 3-piece * 2 bunks * Storage compartment on the back of the cab with flexible gooseneck lamp, control module, alarm clock and charging station * MAN Media System Navigation Professional 12.3 inches * Navigation SD card EUROPE * Smartphone integration * Infotainment control MAN SmartSelect with touchpad and direct selection buttons * Lane departure warning LDW * Driver attention alert MAN AttentionGuard * GSR equipment: rear view camera, turning assistant, tire pressure monitoring, emergency braking assistant, etc. * and more Superstructure: PAVIC OPTIPA steel short timber body 6800mm loading length with aluminum front panel 4 OPTIPA SL timber bolsters with 8 OPTIPA AL10 aluminum frames Access ladders Toolbox and more Loading crane: according to your choice: Palfinger Epsilon TZ15 9.8 or Palfinger Epsilon Q150Z 9.6 alternatively TajfunLIV 150Z 9.6 or TajfunLIV 150Z 9.6 cabin crane...

Condition: used, mileage: 61,578 km, power: 213 kW (289.60 HP), first registration: 04/2021, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Well-maintained 15-tonne MAN TGL 15.290 4x2, Meiller 3-way tipper, 4.40 m long, with 290 hp, payload of 7,700 kg, automatic transmission, trailer hitch with air pressure connections, tipping hydraulic connections, total weight 33,000 kg, air conditioning, differential lock on rear axle, navigation system, video turning assistant system, with only 61,000 km and from first owner, and more. Equipment: C cab (short) with rear window Wheelbase 3,575 mm Unladen weight 7,300 kg Payload 7,700 kg Euro 6 D engine with 290 hp and 1,150 Nm of torque Drive 4x2 Meiller 3-way tipper approx. 4.40 m x 2.42 m x 0.60 m high Front wall approx. 0.80 m high 6 recessed lashing eyes in the floor Floor: VS 100 - 4 mm Side walls in M-JET design BS70 - 2.5 mm Rear wall of tipping body, pivoting Automatic transmission MAN TipMatic 12 12 OD MAN EasyStart for TipMatic Differential lock in rear axle Air conditioning Trailer hitch Rockinger Type 400G 150A with air pressure connections Tipping hydraulic connections at the rear Trailer load with continuous braking system 19,853 kg Permissible total weight 33,000 kg Front and rear axle leaf-sprung Front springs parabolic 7.5 t, rear springs parabolic 11.5 t Front axle VOK-07, rear axle Hypoid HY-1133 Front axle load 7,100 kg, rear axle load 11,500 kg Axle ratio, i=4.11 Stabilizer for front and rear axle MAN BrakeMatic with ABS and ASR ESP Engine brake Regulated rocker arm brake (EVBec) Emergency Brake Assist 2 (EBA2) Lane-Guard System IV (LGS IV) Cruise control Disc brakes on front and rear axles Sun visor Extendable sun blind on driver's side 2 work spotlights on cab roof Video turning assistant system (VAS) with separate display on A-pillar Dust box in the cab Roof hatch Multi-function steering wheel Electrically adjustable and heated exterior mirrors Electric windows Nwodpfsz Dmf Ajx Agrel MAN Media Package Navigation Radio MAN Media Truck Advanced 12 V with 7" color display MAN sound system Hands-free system Comfort for 2 mobile phones (MFL and Bluetooth® compatible) Driver comfort seat, air-sprung with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Very good and well-maintained condition German vehicle from first owner Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2619 F

Condition: used, mileage: 61,578 km, power: 213 kW (289.60 HP), first registration: 04/2021, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Well-maintained 15-tonne MAN TGL 15.290 4x2, Meiller 3-way tipper, 4.40 m long, with 290 hp, payload of 7,700 kg, automatic transmission, trailer hitch with air pressure connections, tipping hydraulic connections, total weight 33,000 kg, air conditioning, differential lock on rear axle, navigation system, video turning assistant system, with only 61,000 km and from first owner, and more. Equipment: C cab (short) with rear window Wheelbase 3,575 mm Unladen weight 7,300 kg Payload 7,700 kg Euro 6 D engine with 290 hp and 1,150 Nm of torque Drive 4x2 Meiller 3-way tipper approx. 4.40 m x 2.42 m x 0.60 m high Front wall approx. 0.80 m high 6 recessed lashing eyes in the floor Floor: VS 100 - 4 mm Side walls in M-JET design BS70 - 2.5 mm Rear wall of tipping body, pivoting Automatic transmission MAN TipMatic 12 12 OD MAN EasyStart for TipMatic Differential lock in rear axle Air conditioning Nwsdpfx Agoz Dmgmjrjl Trailer hitch Rockinger Type 400G 150A with air pressure connections Tipping hydraulic connections at the rear Trailer load with continuous braking system 19,853 kg Permissible total weight 33,000 kg Front and rear axle leaf-sprung Front springs parabolic 7.5 t, rear springs parabolic 11.5 t Front axle VOK-07, rear axle Hypoid HY-1133 Front axle load 7,100 kg, rear axle load 11,500 kg Axle ratio, i=4.11 Stabilizer for front and rear axle MAN BrakeMatic with ABS and ASR ESP Engine brake Regulated rocker arm brake (EVBec) Emergency Brake Assist 2 (EBA2) Lane-Guard System IV (LGS IV) Cruise control Disc brakes on front and rear axles Sun visor Extendable sun blind on driver's side 2 work spotlights on cab roof Video turning assistant system (VAS) with separate display on A-pillar Dust box in the cab Roof hatch Multi-function steering wheel Electrically adjustable and heated exterior mirrors Electric windows MAN Media Package Navigation Radio MAN Media Truck Advanced 12 V with 7" color display MAN sound system Hands-free system Comfort for 2 mobile phones (MFL and Bluetooth® compatible) Driver comfort seat, air-sprung with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Very good and well-maintained condition German vehicle from first owner Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2619 F

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 47 kW (63.90 HP), motor manufacturer: Kubota, gearing type: hydrostat, fork length: 1,200 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 14-17.5, rear tire type: pneumatic tires (air-filled), rear tire size: 10.0/75-15.3, overall weight: 6,150 kg, color: red, Equipment: CE marking, all wheel drive, cabin, gripper hydraulics, head guard, lighting, pallet forks, seat heater, sideshift, === MAIN SPECIFICATIONS === Year: 2025 Operating hours: 1 h Maximum lifting capacity: 3,500 kg Maximum lifting height: 4.70 m Free lift height: 150 mm Load centre: 500 mm Mast type: Triplex Engine: Kubota V2607-CR-TE5B Engine power: 47 kW Emission class: Stage V Drive: Diesel Transmission: Hydrostatic Fork dimensions: 1200 x 120 x 50 mm Tyres: Pneumatic Front tyre size: 14-17.5 Rear tyre size: 10.0/75-15.3 Operating weight: 6,150 kg CE certification: Yes === EQUIPMENT & FEATURES === Enclosed cabin with heating Heated seat Four-wheel drive Cascade fork positioner Side shift Grab hydraulics Pallet forks Cabin lighting Nwodpfx Aoy H Axiegrsl Overhead guard Forklift hook Automatic transmission === CONDITION === New and fully functional machine with only 1 operating hour. Inspection and operational testing are possible by appointment. === DESCRIPTION === 2025 Magni FL 3.5 diesel forklift with a maximum lifting capacity of 3,500 kg and a lifting height of 4.70 m. The machine is equipped with a Triplex mast, Kubota Stage V diesel engine, hydrostatic transmission, four-wheel drive, fork positioner, side shift and an enclosed heated cabin. === PRICE, LOCATION & DELIVERY === Price: On request Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, oil tank capacity: 90 l, total length: 1,600 mm, total width: 1,000 mm, total height: 1,600 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Here is a shortened version comfortably below 3,500 characters, while keeping the important technical and sales information. OFFER OF THE WEEK! MTP HYDRAULIC CNC PRESS BRAKE 1320 MM / 40 T 2-AXIS X + Y | TOUCHSCREEN CONTROL Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to companies across Europe. The MTP 1320/40 hydraulic CNC press brake is a compact and efficient machine designed for accurate and repeatable sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is ideal for workshops and production companies looking for a practical and easy-to-operate bending solution. MTP-3212 TOUCHSCREEN CONTROL The machine is equipped with the MTP-3212 touchscreen controller and 2 controlled axes: * Y axis – ram movement / bending depth * X axis – rear back-gauge positioning Controller functions include: * Touchscreen interface * Programming of bending operations * Storage of bending programs * Manual programming * Tool parameter management * SD card memory * X-axis back-gauge positioning * Y-axis bending-depth control AMADA-PROMECAM STYLE TOOL CLAMPING The machine is equipped with an AMADA-Promecam-style manual upper tool-clamping system, allowing convenient replacement and positioning of the segmented upper tooling. SAFETY EQUIPMENT * Side safety guards * Front safety light curtains * Secured rear working area * Emergency stop system * Automatic stop when the protected safety zone is breached TECHNICAL DATA * Nominal force: 400 kN / 40 t * Working length: 1320 mm * Controlled axes: X + Y (2 axes) * Distance between columns: 900 mm * Throat depth: 180 mm * Ram stroke: 100 mm * Maximum daylight: 290 mm * Back-gauge range: 500 mm * Approach speed: 80 mm/s * Working speed: 9 mm/s Nwsdpfsyr N E Eox Agrsl * Return speed: 80 mm/s * Main motor power: 3 kW * Dimensions: 1500 × 1300 × 1600 mm * Controller: MTP-3212 touchscreen * Tool clamping: AMADA-Promecam style * Crowning / compensation system: Not equipped The MTP 1320/40 combines compact dimensions, simple touchscreen operation and reliable hydraulic technology. The X + Y axis configuration provides automatic back-gauge positioning and control of the bending depth, making the machine suitable for individual jobs as well as repeat production. DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to destination. Please provide your delivery address or postal code to receive a transport quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, workpiece weight (max.): 11,000 kg, feed rate X-axis: 600 m/min, feed rate Y-axis: 200 m/min, spindle motor power: 11,000 W, product height (max.): 455 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 200×3200 | 200 T | MTP-3212 | 4 AXES X,Y1,Y2,R+V The brand-new MTP 200×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its heavy-duty welded frame, advanced CNC control system, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup for both single-part and high-volume manufacturing. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system (Germany) • Schneider Electric electrical components Nedpfx Agezg Ebwsrewl • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2530 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 11,000 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 335 h, functionality: fully functional, working width: 850 mm, area performance: 4,200 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, Hako Scrubmaster B90 CL TB850 Scrubber-Dryer New SIAP 6V 175Ah gel batteries (4x) 2019 model year; 335 operating hours 850mm cleaning head (TB850) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water extraction power from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 850 Squeegee working width (mm): 1100 Theoretical coverage (m²): 4200 Nwsdpfx Aez Eiziegrel Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW 6V 175Ah SIAP gel batteries (x4) NEW 445mm PPL 0.5 disc brushes (x2) NEW 24V 600W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: The 85-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design makes it highly maneuverable; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (850 mm) ensures high area coverage. The control panel is highly legible and intuitive to operate.

Condition: reconditioned (used), Year of construction: 2023, operating hours: 36 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 TB510 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) 2023 model year; 36 hours of operation 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger simplifies daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and a new suction hose New suction motor ensures high water pickup performance from the squeegee Nwedjz Eh R Njpfx Agrel Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah gel batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing work interruptions for refilling The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: ready for operation (used), Year of construction: 2012, spindle bore: 75 mm, spindle speed (max.): 2,400 rpm, rotational speed (max.): 2,400 rpm, quill diameter: 75 mm, Fanuc OITD Capacity: 1750 x 560 mm Njdpfx Ajzzdtuegrewl Diameter: 390 mm on carriage 12-position turret Tool guards Set of VDI tool holders

Condition: reconditioned (used), functionality: fully functional, Profile cutting center Scarabeo 55 CNC cutting center with 1 controlled axis, designed to cut PVC profiles with the highest cutting speed and quality. It consists of four different components connected in an automatic line 1. automatic bar stock magazine - steel body with 6 greapers moved by belts, driven by electric motors - max. capasity 8-10 profiles (depends of its widht) - equipped with a bar presence detection device 2. automatic profile feeding unit 3. automatic cutting unit - ø 500 mm blade - electromotor 3 kW, 2.800 RPM - cuts at three main angles, 45° - 90° - 135° - special centering device which allows the blade center of rotation to be positioned in the center of the profile section, so that wedge cuts can also be made automatically - equipped with a special evacuation system for waste and cutting chips - fully enclosed with front door for free access to the cutting area for calibration, cleaning and maintenance purposes - pneumatic pistol for blowing chip Automatic unloading unit - automatic discharge device with pneumatic control - flat table for storing cut profiles - safety guard for moving parts Power 7,2 kW Weight 1.500 kg - Industrial computer - TFT color LCD screen - Keyboard - data retrieval from the keyboard or ON-LINE - control of each function on the monitor - Virtually unlimited number of data on the profiles to be cut - label printer with choice of format and letter size Nsdpfxerungas Agrowl - collection of data on the remains of cut profiles (waste) - the ability to collect statistical data (weekly and monthly report) - Automatic fault diagnosis Sizes: widht: 2300 mm, lenght: 12500 mm Completely refurbished, 6 months warranty on parts. Ready for work To be viewed at the company's headquarter PRICE: 50000 €

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 11,064 h, load capacity: 2,500 kg, lifting height: 3,750 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,700 mm, fork length: 1,600 mm, drive type: Treibgas, Internal combustion forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Side shifter, Nwedjzz Dhfopfx Agrol 3rd valve, rear work light, front work light, half cab, load guard, interior mirror, joystick, windshield wiper.

Condition: excellent (used), Catalog number 8110 TECHNICAL DATA - max. blade diameter 350mm - spindle diameter 30mm - blade adjustable up/down - spindle lock - blade guard - max. cutting height 100mm - min. cutting width 230mm - max. cutting width 2250mm - max. cutting length 3000mm - with scoring saw - max. scoring saw diameter 120mm - spindle diameter 20mm - scoring saw motor power 2 x 0.75kW - main motor power 2 x 4kW - electric adjustment of the cutting unit - carriage feed motor power 0.37kW - 2 types of rotation speeds 3000, 4500 - dust extraction nozzle diameter 2 x 130mm - overall dimensions L/W/H 4000 x 2200 x 1000mm - shipping dimensions L/W/H 4000 x 1300 x 1100mm - weight approx. 1100kg ADVANTAGES – Polish production – electric adjustment of the cutting unit – DTR documentation – with scoring saw – very good condition – used double-blade saw Net price: 12900 PLN Net price: 3000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations) Nwjdpfx Agez Dim Ajrol

Condition: reconditioned (used), Year of construction: 2020, operating hours: 359 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, Hako Scrubmaster B45 CL TB510 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) Year of manufacture: 2020; 359 operating hours Nwjdpfxsz E Rvhs Agrsl 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Built-in battery charger and wheel drive facilitate daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint The unit is equipped with a new, durable drain hose and a new suction hose New vacuum motor ensures high suction power at the squeegee Each unit we offer features individually taken photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah Gel Batteries (2x) NEW 24V 400W vacuum motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution ...cleaning solution tank, eliminating the need for frequent work interruptions to refill it. Its design makes the machine highly maneuverable. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.