Used Hensel Ebu 50 for sale (33,796)

Condition: new, Year of construction: 2024, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw Nlodpfx Aedkxlkog Dsa - shaft diameter 50 mm - weight 325 kg - 400 volt 3 phase

Condition: used, mileage: 577,156 km, power: 240 kW (326.31 HP), first registration: 07/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2025, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, soot filter, tail-lift, Mercedes Benz Antos 1833 4x2 BL Reinforced engine brake Dautel lifting platform DL 1500 S Sliding tarpaulin left and right Trailer load 18000 kg VA 355/50 R 22.5 HA 295/60 R 22.5 All information without guarantee - subject to prior sale Nledpfx Agsvm Nc Ao Doa

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Nsdpfxextmzxo Ag Djla Length: 10 m Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Nledpfeibh S Hex Ag Dea Equipped with a ladder.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, pass-through width: 1,500 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to offer our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and wood processing machinery. With decades of expertise and innovation, Madora is recognized for delivering robust, efficient, and user-friendly solutions tailored to meet the demands of industrial customers across Europe. Our machines are engineered for precision, performance, and long-term reliability—always at competitive prices. Nedpfx Aowzvkheg Dola The GP 1500 3Z is a versatile, high-capacity deburring machine designed for cleaning sheet metal following various cutting processes. Equipped with three independent "Z"-type machining units, this model features outstanding flexibility and throughput. In practical terms, the machine can perform up to three operations simultaneously: not only does it efficiently remove scale and slag after plasma cutting, but it can also deburr and round the edges of laser-cut parts—all in a single pass. The GP 1500 3Z accommodates a wide range of material thicknesses and workpiece widths up to 1,500 mm, making it ideal for both small and large components. With the appropriate tooling, the machine is also well-suited for intensive edge rounding and oxide layer removal. Operator convenience is ensured by a TFT touchscreen control panel, which provides continuous, comprehensive management of all machining parameters, including workpiece height, feed speed, and tool rotation. Each unit is independently controllable, allowing the operator to select the required processing stages for every pass.

Condition: good (used), 25 running meters tire rack Used, very good condition, see pictures height 2,5 m Nlsdpfx Aofdik Iog Dea depth 50 cm, field load 9000 kg beam length 2,1 m Beam with superimposed load / compartment 1000 kg Negotiable price: € 1.950,-- net ex stock Offer consists of: + 12 pcs. frames pre-assembled, 9t field load, depth 50 cm, height 2,5 m + 66 pcs. beams, length 2,1 m, 1000 kg payload/slot + 132 pcs. suspension locks + 24 pcs. concrete anchors Load plates Other composition on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), 60 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/shelf 1000 kg Frame blue Nodpfx Asi Hl T Ieg Djla Beam painted blue Negotiable price: € 5.250,-- net ex stock Offer consists of: + 16 pcs. frames pre-assembled, depth 50 cm, height 3 m + 90 pcs. beams, length 3,7 m, 1000 kg load/slot + 180 pcs. suspension locks + 64 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, 50 rm pallet rack Jungheinrich type MPB new goods New goods, see pictures height 9 m depth 110 cm, blue beam length 2,7 m yellow girder with load / compartment 3000 kg Negotiable price: € 12.750,-- net ex stock Offer consists of: + 19 pcs. frames pre-assembled, depth 110 cm, height 9 m Nlodpfjlp Ntgjx Ag Doa + 144 pcs. beams, length 2,7 m, 3000 kg payload/slot + 288 pcs. suspension locks + 78 pcs. concrete anchors Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Frame blue, infills galvanized. 3.5 m to 9 m heights in stock. Bay load 12 tons. Beam yellow. Product is in stock. Transport and assembly possible on request. Inspection possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: MF09BB30, type of input current: three-phase, Equipment: clamp, FOR SALE – Minipack-Torre Tunnel 50 Shrink Tunnel (Italy) Machine Description For sale: High-quality Minipack-Torre Tunnel 50 shrink tunnel designed for industrial and packaging applications with hot air film shrinking technology. Italian manufacture, renowned for robust build, reliability, and user-friendly operation. Ideal for packaging products in PVC, POF, or polyolefin shrink film. Technical Specifications (approximate): - 7200W, 11A - Manufacturer: Minipack-Torre (Italy) - Model: Tunnel 50 - Type: Shrink tunnel (heat shrink packaging) - Power supply: 400 V / 3-phase / 50 Hz - Adjustable temperature and conveyor speed - Digital control panel (temperature and belt speed) - Stainless steel roller conveyor inside the tunnel - Emergency stop and main power switch - Tunnel dimensions: approx. 850 × 500 mm (W × H) - Mounted on lockable caster wheels for easy mobility Condition: - Fully functional and tested - Well-maintained, ready for immediate use Nlodpfxoxt Dwkj Ag Dea - Available for inspection at Roffelsen Plastics, Ivanka Pri Nitre (Slovakia) Price: €3,000 – negotiable Final price depends on inspection and transport arrangements. Ideal for: - Packaging lines for plastic, cosmetic, or food products - Small to medium production facilities - Perfect companion for L-sealers and shrink-wrapping systems Location: Ivanka pri Nitre, Slovakia Phone: available upon request Short version for listings For sale: Minipack-Torre Tunnel 50 shrink tunnel Professional Italian shrink packaging machine in excellent condition. Adjustable temperature and conveyor speed, robust and reliable.

Condition: new, CAT350 Marble Bucket Nledpfx Asn Tm Eksg Doa The Galen marble bucket is a specialized attachment used in the mining and extraction of marble, designed to handle the unique characteristics of this natural stone. Its construction typically includes features that minimize wear and tear, utilizing materials and engineering tailored to the hardness and abrasiveness of marble to ensure efficient excavation and prolonged bucket life. For detailed information please contact us

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 0440298, table bore: 120 mm, table diameter: 500 mm, overall weight: 5,200 kg, gear diameter: 500 mm, TECHNICAL DETAILS Wheel diameter: 500 mm Minimum wheel diameter: 50 mm Maximum external ring diameter of processed gear with internal gearing: 800 mm Maximum distance from shaping axis to table axis: 355 mm Minimum distance from shaping axis to table axis: 0 mm Maximum number of teeth of processed gear: 300 Nledpfx Aeyx U T Asg Dja Minimum number of teeth of processed gear: 12 Smallest module: 1.5 Largest module: 8 Table diameter: 500 mm Table bore: 120 mm Bore depth: 650 mm MACHINE DETAILS Weight: 5,200 kg

Condition: not inspected (used), functionality: unexamined, Year of construction: 2018, operating hours: 11,264 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 150 mm, construction height: 3,354 mm, DGUV certified until: 01/2027, Equipment: UVV, Service + UVV 01/2027 5,000kg EVO 3rd & 4th Valve Fork Positioner Electric Forklift No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,000 mm Fork length: 2,400 mm Free lift: 150 mm Type: Counterbalance forklift MACHINE DETAILS Operating hours: 11,264 h Mast type: Clear view Drive type: Electric Battery: 17/09/2018, 80V 6PzS 930Ah, measured at 85.5V (very high performance!) Nledpfeyzfwqox Ag Doa Dimensions & Weight Dimensions (L x W x H): 5,400 x 1,400 x 3,354 mm Weight: 8,300 kg EQUIPMENT Former Linde Full-Service machine 3rd & 4th valve; fork positioner with sideshift Mast position memory installed Full cabin with heating Note: Mast disassembly can optionally be offered by the seller for €950 net. All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at buyer’s own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday, 7:00–16:30. Tall mast can be disassembled for transport on request. If collection is not made on time, a storage fee of €20 per machine per day applies (payment must be settled before collection).

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Njdpfsy Edl Ujx Ag Djla Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Njdpfx Asx Ddc Ijg Dela Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced Nsdeu Thhrspfx Ag Dela All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. Nodpfow U Dt Njx Ag Dola The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), This SSI Schäfer R3000 shelf rack starter bay with additional dividers is a particularly robust and proven storage solution for professional use in warehouses, workshops, businesses, archives, and hand storage areas. The high-quality, galvanized boltless shelving is perfectly suited for the clear and secure storage of boxes, small parts, containers, and other stored goods. With a shelf load capacity of up to 150 kg per shelf and a flexible 5 cm pitch, this immediately available shelving system provides a powerful and versatile solution for various storage requirements. This version additionally includes 20 used dividers for SSI Schäfer R3000 shelving racks. This listing serves as a reference for available versions with extra shelf dividers – if interested or if you have any questions, please contact us directly. PRODUCT DETAILS: - Height: approx. 249 cm - Depth: approx. 50 cm - Length: approx. 130 cm - Shelf load: 150 kg per shelf - Shelves: approx. 128.5 x 50 cm - Colour / finish: galvanized - Upright: approx. 249 x 50 cm, pre-assembled - Shelf pitch: 5 cm - Design: boltless system for quick assembly - Availability: from stock Wietmarschen - Condition: used uprights and shelves - Manufacturer: SSI Schäfer R3000 - Accessories: 20 x divider / compartment separator - Divider model: TRF4517 - Divider dimensions: approx. 17.5 cm high / total height approx. 20.5 cm / width approx. 46.5 cm - Divider condition: used, galvanized - Other quantities available! ---- MULTIPLE UNITS AVAILABLE FOR IMMEDIATE DELIVERY ---- DELIVERY CONTENTS: - 02 x frame (approx. 249 x 50 cm), pre-assembled - 06 x shelf (approx. 128.5 x 50 cm) - 01 x cross bracing for stability - 20 x divider / compartment separator SSI Schäfer R3000 (TRF4517) PRICE: €190.00 net €226.10 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Germany-wide delivery through our partner freight forwarder – shipping costs depend on postcode - Professional assembly and disassembly by trained teams optionally available. - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible Nljdpfxjy Hifve Ag Dea PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer – individually tailored to your requirements. Whether new construction, modification or extension – we offer you expert advice for your rack configuration. SHOWROOM: We invite you to visit our showroom! On site you can get a comprehensive impression of our pallet racking, storage shelving, and other solutions. Many systems are assembled and can be experienced directly. Our expert advisors are at your disposal for questions and individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers & variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. Our telephone number is listed on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change Nedpfoy Hkgbsx Ag Dsla - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) Nljdpfxjy Hkfds Ag Dja If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time Nlsdpfey Hkd Hox Ag Dsa - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), machine/vehicle number: 1756, Year of construction: 2008, load capacity: 32,000 kg, lifting height: 4,520 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 7,100 mm, total width: 3,700 mm, operation weight: 39,900 kg, additional equipment features: Centralized greasing system, Equipment: lighting, SveTruck 32120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Nodpfeyuhhqsx Ag Dela Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Wheel size – Steering wheel: 16.00x25

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Nlodpfxjyi Dnie Ag Dsa Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: used, operating hours: 5,485 h, mileage: 98,662 km, power: 118 kW (160.44 HP), first registration: 03/2014, overall weight: 11,400 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 5,500 kg, empty load weight: 5,900 kg, wheelbase: 1,800 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro5, loading space volume: 5 m³, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, power assisted steering, soot filter, * German vehicle * 1st owner * In 2024, €18,000 was invested in the technology (invoice available) * Only 5,965 operating hours * Original 98,662 km * Condition as shown in photos * 3-disc brush system * Adjustable/movable brush system * Working width up to 3.40 m * Disc brush diameter: 750 - 900 mm * Pre-spray system * Suction hose diameter: 225 mm * 5 m³ stainless steel debris container * 600 l water tank * Discharge height: 850 mm * Joystick control * Air conditioning * EasyDrive (hydrostatic drive) (SN) * Maximum speed 50 km/h * Reversing camera * Air-suspended comfort seat * LED work lights * Iveco 4-cylinder diesel engine * 118 kW / 160 hp * 3,920 cc displacement * Beacon lights * Stereo CD * 120-liter diesel tank * GVW 11,400 kg * Curb weight: 5,900 kg * Payload: 5,500 kg If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer generally is WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You will find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We strongly offer and recommend an inspection and thorough check of the goods to prevent any possible misconceptions regarding their condition and suitability. Inspection and checks are possible at any time by prior arrangement and are expressly encouraged. Nsdpfxoy Himys Ag Dela All information provided is without guarantee. No liability is accepted for mistakes or inaccurate details in this listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: good (used), Year of construction: 2020, operating hours: 6,839 h, load capacity: 5,000 kg, lifting height: 6,280 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, mileage: 6,839 km, Just arrived Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2020 Capacity: 5,000 kg Lifting height: 6,280 mm Clearance height: 3,000 mm Equipped with: FREELIFT, SIDESHIFT and FORK POSITIONER 6,839 operating hours Battery Automatic filling system with external charger Nsdpfx Aey Hdpcjg Dela

Condition: like new (used), Year of construction: 2014, Kilia Kutter 50 Liter Meister Plus Vario Hand and Knee Operation Condition: Factory Overhauled with 6 Months Warranty. Infinitely adjustable knife shaft drive (50 – 5100 RPM) with reverse operation (50 – 500 RPM) and infinitely adjustable bowl drive (7 – 20 RPM) Central lubrication for knife and plate shaft bearings Noise protection cover, manually operable knife cover, stainless steel, rustproof, 1 knife head with 6 parts, Electric knife shaft brake, Electric thermometer with digital display and automatic shutdown, Electric speed counter with digital display and automatic shutdown, Touchscreen with splash guard flap, Njdpey Hkd Tsfx Ag Dsla Knife shaft drive power 22 kW, 400 Volts Bowl drive power 1.5 kW, 400 Volts