Used Hess Single-Piece Wood Sanding Machine for sale (75,418)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm Nodpfxoy A I Sgo Akuslb - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 221/2-306, functionality: fully functional, operating hours: 207 h, type of input current: three-phase, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, workpiece length (max.): 1,000 mm, number of axes: 3, number of slots in tool magazine: 4, total height: 2,500 mm, total length: 1,500 mm, total width: 2,500 mm, overall weight: 3,000 kg, Equipment: CE marking, documentation/manual, HOLZ-HER EVOLUTION 7402 4MAT – Vertical CNC Machining Center Year of manufacture: 2023 Operating hours: 207 h Availability: Immediately High-performance industrial vertical CNC machining center suitable for milling furniture carcasses and other components from wood and laminated panels. Key Features - Vertical machining with highly accurate vacuum positioning system (including complimentary vacuum pads) - Rear clamping for processing all edges of the workpiece, enabling complete machining without repositioning - Laser length measurement system - Air-conditioned control cabinet - Uninterruptible power supply for computer unit Nedey Eygnepfx Akuelb Technical Specifications - Working length: 200–3200 mm - Working height (Y): 70–920 mm - Panel thickness: 8–70 mm - Maximum speed: - Vector: 68 m/min - Per axis: X 25 – Y 60 – Z 20 m/min Machining Unit - 10.3 kW electrospindle (air-cooled) - HSK-F63 tool holder - 4-position tool magazine - XL boring unit – 19 drilling spindles (13 vertical, 6 horizontal) - Groove saw in Y-direction Software and Control - Complete CAMPUS V7 EVOLUTION CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control console - USB port - Wifi Equipment - ECO vacuum system (8 m³/h)

Condition: new, Year of construction: 2026, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery NEW PRICE LIST year 2026 WHILE STOCK IS STILL AVAILABLE I CAN GUARANTEE PRICE LIST year 2024 Super discount while stocks last 100% made in ITALY for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Nodef H Hlrspfx Akuslb Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: used, Rehnen edge sander, 380V power supply, 3KW motor, Nljdoy A Ribjpfx Akuob abrasive belt height 150mm, oscillation, worktable adjustable at an angle, used machine, ready for operation.

Condition: used, Year of construction: 1997, type of input current: three-phase, DELLA VEDOVE profile sander Nodpjytcv Hsfx Akuslb

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Year of manufacture: 1996 Nljdoyrqzbepfx Akusb

Condition: good (used), Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Nlodpfx Aksy A Sq Teuob Suction inlet diameter 100 mm Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system Njdpjpl Tgmjfx Akuolb - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock Nlsdshrukijpfx Akueb - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock Nlodshrumaspfx Akuob - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Nsdpjwh Rlgsfx Akuolb Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Condition: good (used), functionality: fully functional, For sale the surface grinding, polishing machine Fickert & Winterling GmbH ( Germany ) with NEW grinding head ! Very good working condition Nsdpfx Akjy Aznueujlb max working dimensions: 1,6 x 4,8 m external dimensions : 3 x 3,5 x 6 m ( W x H x L )

Condition: used, functionality: unexamined, For internal and external radii 4 profile rails Nlsdpfxjyznthe Akueb Tilting table Table size approx. 600 x 650 mm

Condition: excellent (used), Year of construction: 1999, Manufacturer: WEGOMA Model: KS 2400 Nledpfx Aoyza Ahskuob Category: Edge sanding machine Year of manufacture: 1999 Table width: 300 mm Table length: 730 mm Total units: 1 Max. sanding belt width: 150 mm Sanding belt length: 2,400 mm Main motor: 1.85 kW Sanding sleeve Round sanding support Oscillation Height adjustment: Table, manual Sanding belt tiltable: Yes Required length: 1.7 m Required width: 0.8 m Required height: 1.5 m Location: ex-stock 54634 Bitburg - immediately available - Subject to prior sale

Condition: good (used), Ehemann belt sanding machine FU 3 with 3 sanding units Oscillating. Sanding width 400 mm. Height approx. 150 mm. Sturdy machine with little wear. Nedpstdpa Uefx Akujlb

Year of construction: 1996, condition: used, machine/vehicle number: A9611003/0100, Technical data: Nedjyyyhuepfx Akujlb - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Nodpfxob A Sqge Akujlb -Outer diameter: 170 mm -Number: 6 milling cutters -2x: left -4x: right -Price: complete -Weight: 4.6 kg/piece

Condition: like new (used), Year of construction: 2024, Felder Edge Sander FS 700 K Oscillating sanding belt Technical specifications Dimensions [mm]: 1875 x 776 x 1437 Working height [mm]: 895 - 1024 Frequency [Hz]: 50 Weight [kg]: 295 Njdpoy Amv Rjfx Akuolb Power [kW]: 3 Tilt angle [°]: 0-45 Sanding belt dimensions [mm]: 3000 x 200 Sanding belt speed [m/s]: 19 Voltage [V]: 3 x 400 Year of manufacture: 2024 Condition: very good Price

Condition: good (used), PRIMULTINI - grinding machine for knives Nedjyzy Nbopfx Akuelb - grinding lenth max 800 mm - technical condition good

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1000017221, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, controller model: BSuite3, number of spindles: 17, TECHNICAL DETAILS Working area X-axis: 2,500 mm Working area Y-axis: 900 mm Working area Z-axis: 60 mm Number of axes: 3 Tool: ISO 30 Nlsdpfxoyzpcdo Akujb Spindles Total number of spindles: 17 6 vertical in X-axis 5 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis MACHINE DETAILS Numerical control: BSolid Software - BSuite3 EQUIPMENT Automatic unloading device Integrated blade for groove insertion Front protective and safety systems with mats Perimetric protective grids External reference: MME002

Condition: excellent (used), Year of construction: 2023, For sale is a JET drum sander 2244 equipped with a 1.8 HP motor and a maximum sanding width of 560 mm. The machine is in excellent condition and has been inspected and refurbished by our service team. Technical specifications: - Sanding width: 560 mm (1120 mm) - Sanding thickness: 0.8 – 102 mm - Infinitely variable feed rate: 0 – 3 m/min Nedpfx Aeyzqtqekuelb - With oscillation - Drum speed: 1450 rpm - Suction connection Ø 100 mm - Motor power: 1.8 HP / 230 V - Year of manufacture: 2023 / as new The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: JET 2244, drum sander, cylinder, oscillation, sanding machine Reference: R-L0B6O

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3486579, Offer 26048 Single-spindle Copy Milling Machine for 3-Sided Processing Technical Data: - 3-sided machining in a single clamping for lock and euro-profile cylinder (PZ) cutouts, - e.g. milling in aluminium / plastic / steel profiles - Operated via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar rotation device for 3-sided processing Nedpfxoyymgks Akuslb - Working range - x (crosswise) 250 mm - - y (longitudinal) 90 mm (depending on position) - - z (vertical) 120 mm (depending on position) - Max. profile height, depending on position: approx. 120 mm - Max. profile depth: 100 mm - Spindle speed: approx. 6,000 + 12,000 rpm - Pneumatic connection: 8 bar - Drive: 400 V / 1.5 kW - Required space: approx. W 650 x H 1550 x D 850 mm - Weight: approx. 340 kg

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Njdpfxsw A Aa Ee Akuolb Machining and sanding of all types of wood, also in combination with plastics Year of manufacture: 1991 Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Required space: 1900 x 900 mm All technical data and information as per brochure

Year of construction: 2019, condition: ready for operation (used), This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine. Nedpfx Aex S Si Iskuslb Application Types CNC Wood Machining

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism Nljdpfxewx Hcij Akuob -Machine transport rollers: 4 tank rollers -Load capacity: 30 t (7.5t per piece) -Support height: 110 mm -Plates: 3x Ø 140 mm / 1x width 135 mm -Submission/Price: complete -Dimensions of transport case: 1005/200/H165 mm -Total weight: 57 kg.