Used High Speed Stamping Press for sale (51,738)

Condition: like new (used), Collette high speed bowl mixer Model: SM200 high speed bowl mixers, 200L, stainless bowl and mixer attachment, brand new unitronics HMI + PLC controls Duodjd D N Rmjpfx Ad Nst

Condition: used, Year of construction: 1976, arm length 1450 mm taper MK 4 Cube ja Duedpfx Aoyn R N Dod Njt weight of the machine ca. 3 t

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors. Dodpfxsnygvre Ad Neut

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Dusdpfx Adoyq Nyye Net Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: refurbished (used), functionality: fully functional, table length: 1,200 mm, table width: 500 mm, spindle mount: MK 3, height adjustment type: electric, Donau DR23 Radial Drilling Machine – Robust Quality Machine For sale is a reliable Donau DR23 radial drilling machine, ideal for workshops, metalworking, or industrial applications. The machine impresses with its sturdy design, high precision, and versatile applications for drilling, countersinking, and thread cutting. Details: Manufacturer: Donau Model: DR23 Dodpfx Adsyrtkxs Nsut Radial drilling machine overhauled by Vaumtec Quick-change chuck Stable cast construction Adjustable arm for flexible machining of large workpieces Suitable for steel, aluminum, and other metals Forward and reverse rotation

Condition: good (used), Year of construction: 1998, DONAU DANUMERIC 440, year of manufacture 1998 Duedpfx Adjyplb Re Njt Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg

Condition: used, functionality: unexamined, High-speed doors in various sizes, used and dismantled, price per door: €100.00 Duodpfx Adsynnv Is Nst

Condition: new, In stock CW, XCW & DCW plate standard/ bevel quick-change welders for excavators . Hardox 400 price incl. VAT CW00 36,- CW05 115 CW10 174,- CW20 335,- CW30 400,- CW40 410,- DCW05 97,- DCW10 190,- DCW 40 410- XCW 00 30,- XCW 05 100,- XCW 10 120,- XCW 40 610,- Hole size 30 - 60 mm R 30 - 60 mm distance between hole and hook 150 - 475 mm Trading company Pieper Nijkerkerstraat 71 3882 PD Putten (Gelderland) Duedef Tny Sepfx Ad Njt

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Djdpfxoynt Uce Ad Neut Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: excellent (used), Year of construction: 2010, KAWASAKI YF03N ULTRA-HIGH-SPEED DELTA ROBOT The Y series robots are parallel type pick & place robots offering quality and reliability. Brand Kawasaki Type YF03N Year of manufacture 2010 Serial number YF0030012 Electrical connection 400 V Overall dimension L 2400 mm Duodpsg T U Nbjfx Ad Net Overall dimension W 2350 mm Overall dimension H 2750 mm Description of the Kawasaki YF03N robot Type Parallel kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) *1 ± 0.1 Movement range (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) *2 0.27s (1 kg) 0.45s (3 kg) Other: 400 volt; camera; software; instructions; components; iron frame, with switch cabinet; 2x connection cable 5-pole; control panel E40E-A003 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Dujdpfx Adsquhbgo Net Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Dedpfxsf Axn Ue Ad Njut Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm Dsdpfx Adjdzqlts Nsut - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel Djdpfx Adju Rwa Ie Nout - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Dodpfx Adsi A A Tbo Nout Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Duedpfjfxg T Uox Ad Njt Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min Dodpfxevphiyj Ad Nout * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Duodpeymnykofx Ad Nst Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: used, Year of construction: 2003, operating hours: 6,431 h, Jungheinrich ESE 20 high-speed electric pallet jack truck RA2396 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90079958 Battery change: 2016 TÜV: until 2023 Operating hours: 6431 h Fork length: 1150 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Djdpfxowb I Hbs Ad Njut Your specialist and contact for intralogistics

Condition: used, Year of construction: 2003, operating hours: 4,267 h, Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Dedpfxowcqg Hs Ad Nout Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW Dsdpegpxc Sjfx Ad Nout equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle Dujdpfspvlf Sox Ad Nst - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment Dedpfx Adodhzf Io Nout with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: good (used), ManuMatik / KraussMaffei high-pressure cylinders  The high-pressure cylinders come from a commutator press and were in use there until the end.  Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are included  Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Duodpfxohtyxls Ad Net Scope of delivery 1 x pressing unit Complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2009, functionality: fully functional, operating hours: 10,000 h, total width: 1,300 mm, feed length X-axis: 4,500 mm, Reconditioned Sonar brand generator, 60 kW. Pressing size: 4500 mm x 1500 mm (4.50 x 1.30 m). Equipped with an automatic gluing unit that applies glue independently. Dujdpfsyvhl Tsx Ad Not