Used Hino Em100 Engine Complete for sale (28,266)

Condition: good (used), functionality: fully functional, fuel type: diesel, chain condition: 100 %, Year of construction: 2013, operating hours: 2,435 h, Equipment: rubber tracks, standard shovel, CB 8018 CTS | Year of manufacture 2013 | Only 2,430 hours | Joints newly bushed + adjustment | New tracks | Paint refreshed | includes a 100cm hydraulic swivel bucket. For sale is a JCB 8018 CTS in very good condition, both technically and visually. We acquired the machine for a specific project at the time, which was subsequently cancelled. With only 2,430 operating hours and a recently completed overall overhaul, this excavator is ready for demanding work. The most important features at a glance: Type: JCB 8018 CTS (comfort seat, sensitive pilot control) Year of manufacture: 2013 Operating hours: approx. 2,430 hours (documented) Weight: approx. 1.8 t (perfect for sewer construction, civil engineering and confined construction sites) - The joints have been newly bushed, no play. - Brand new tracks (original quality) - Complete oil and filter change Kodpfxjzr H S Ue Ai Rsdr +++ VISUAL UPGRADE +++ - Complete paint refresh – The machine presents itself not only in excellent technical condition, but also visually. Special equipment / accessories: Includes a heavy-duty 100 cm (1,000 mm) hydraulic swivel bucket (ditch bucket).

Condition: used, Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, Equipment: Basic Inventhor 9 package: MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complying with EUROMOT V emission standard Additional hydraulic connection, 30 l/min and 70 l/min Roller drive via planetary gearbox, 380 kW – VARIO – Load-sensing system Fuel tank, 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm centrally arranged lubrication strips 24-V electrical control system Additional electric pump for operating the following functions when the engine is stopped: “raise/lower/tilt rear belt, open/close comb flap, open/close comb, optional raise/lower permanent magnet belt, optional raise/lower folding hopper” Complete radio remote control Large side GRP maintenance doors Easy-to-maintain engine compartment with LED light Hydraulically reversible fan wheel Bilateral loading protection Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 dark orange Additional equipment: 3-axle semi-trailer chassis Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 units) Hydraulic drive Water spray system, both sides Rear belt, 8.5 m, 1,200 mm wide Over-belt magnet, neodymium Frame for over-belt magnet, neodymium Central lubrication system with pump LED lighting package, engine compartment and rear Kdjdeyu Svxspfx Ai Rjr Note: A new roller has been installed! Delivery date will be agreed upon.

Condition: used, mileage: 565,000 km, power: 250 kW (339.91 HP), first registration: 01/2007, number of seats: 42, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1029 * PICK-UP PRICE * no TÜV (technical inspection), no new batteries, ... * Volvo * 8700 LE * AIR CONDITIONING * 250 kW - EURO 5 - Engine overhaul in 2016 (approx. 468,994 km) for over 27,300,--/net * Injection pump, etc. Fuel lines repaired at VOLVO in 12/2018! * Transmission overhauled at approx. 416,163 km!!! * Engine control unit replaced by VOLVO at approx. 410,331 km. * ZF automatic transmission * Retarder * Auxiliary heater * mechanical wheelchair ramp * complete repair history available – partial excerpt: * Brakes, NOx sensor replaced, rear air springs, engine maintenance, air conditioning maintenance, air dryer replaced, door cylinder door 2 replaced, regular oil changes for all oils, idler pulley replaced, crankshaft seal replaced, modulator rear axle replaced, fuel transfer pump replaced, * All information without guarantee Kjdpfx Aiefg Nrge Rsdr * We reserve the right of prior sale. * We refer to our general terms and conditions. * WE ALSO HAVE A VOLVO SPARE PARTS WAREHOUSE * If required, you can contact us –

Condition: excellent (used), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Alfa laval CHPX510SGD-35CGRX separator complete system including engine Valve rig Control cabinet Starter cabinet Solids pump Cyclone Sludge tank Foundation plate Vibration damping feet Tools for bowl Compression tool Inert gas system Documentation Kjdpfx Aoucct Isi Rjdr Previosly used by alfa laval for training

Year of construction: 2025, operating hours: 225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973LZT031244, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request. Kedpfx Ajztakyoi Rodr

Condition: used, mileage: 238,032 km, power: 100 kW (135.96 HP), first registration: 05/2020, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 08/2026, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 97 Mercedes-Benz Vito 114 CDI EXTRALONG. Paint code: * 9744 Paint color: Brilliant Silver metallic MB 9744 Interior: * Fabric Tunja black Equipment: * 212L Berlin * 9744 Paint color: Brilliant Silver metallic MB 9744 * A1O Rear axle shaft manufacturer: IFA * C447 - * CF0 Standard suspension * CL1 Steering wheel adjustable in inclination and height * CL3 Leather steering wheel * CL4 Multifunction steering wheel with trip computer * D51 Partition wall, continuous, with window * E07 Hill-start assist * E28 Additional battery for retrofitted equipment * E34 Buffer battery for starting process * E36 Battery separator relay for additional battery * EA4 Audio 40 * ED4 Fleece battery 12 V 92 Ah * EL8 Two-way loudspeakers front * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * EZ5 Parking package * EZ7 Active parking assist * F447 - * F64 Exterior mirrors, electrically foldable * F66 Lockable glove compartment * F68 Exterior mirrors, heated and electrically adjustable * FKA Panel van * FR8 Rear view camera * FY1 Anti-theft package * FY7 Multi-button remote control * FZ8 Comfort opening and closing with IR remote control * G42 7G-Tronic Plus * H16 Seat heating for driver * H20 Heat-insulating glass all around * HH4 Automatic climate control system THERMOTRONIC * HI1 Climate zone 1 (cold/comfort) * HZ0 Auxiliary heater, electric * I8H Navigation radio with DAB+ * IB6 Model series C447 Vito/V-Class * IG4 Standard * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IL6 Metallic paint * IN3 Wheelbase 3430 mm, long overhang * J55 Seat belt warning system for co-driver seat * JA6 Collision Prevention Assist * JA7 Blind Spot Assist * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel matrix display * JP2 Assistance package * JW5 Lane keeping assist * JW8 Attention Assist * JX2 Service interval 40,000 km * KB5 Main tank 70 liters * KP4 AdBlue® tank, large * L Left-hand drive * LA2 Headlamp assist * LC2 LED light strip in the cargo area * LC4 Comfort roof control panel * LE1 Adaptive brake light * LG2 LED Intelligent Light System * LX5 Europe * M40 Generator 14V/200A * MG7 Engine OM651 DE 22 LA 100 kW (136 hp) * MG9 Generator management * MJ8 ECO start/stop function * MR6 Emissions class Euro 6c N1 * MS1 Cruise control * MX0 BlueEFFICIENCY package * R21 Wheel size group 1 * RG7 Tires 225/55 R17 * RM7 Summer tires * RS7 Steel wheels 6.5 J x 17 * S04 Co-driver seat, adjustable * SA6 Airbag co-driver * SB1 Driver seat, comfort Kjdpfxszvugzj Ai Redr * SE5 Lumbar support for driver seat * V30 Side wall interior trim in cargo/passenger compartment * VL2 Floor mats, velour * VV9 Attachment points in roof frame * VY2 Fabric Tunja black * W50 Rear door, double-leaf, 180 degrees, without window * X30 Registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XA5 Weight variant 3,200 kg * XC9 Certificate of Conformity * XI0 Model year G0-I * XM8 Control code development * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed materials, German * XW9 Control code adjustment WLTP * XZ0 Model generation 0, model year 2010 * Y10 First-aid kit

Year of construction: 2024, condition: excellent (used), The ZLC series cold chamber die casting machines have been developed based on over 12 years of experience and are widely used for producing zinc or brass alloy components in sectors such as automotive, electrical engineering, electronics, toys, household appliances, and computers. These cold chamber die casting machines are equipped with high-quality imported hydraulic components, a robust machine frame, tie bars made from high-tensile alloy steel, and industry-specific control systems. Key advantages include advanced design, precision manufacturing, rapid response, easy operation, reliability, safety, and low energy consumption. The machine comprises a control system, hydraulic system, lubrication system, cooling system, clamping system, injection system, machine frame, safety door, and more. Its primary function is to extract a precise quantity of molten metal from a separate furnace, pour it into the injection sleeve, and, under high pressure, inject the completely molten alloy into a mold mounted on the platen. The die closes and the high pressure is maintained until the alloy fully solidifies inside the mold. Kdjdpfx Aiey A Hnys Ror

Condition: excellent (used), Year of construction: 2013, fuel type: electric, YALE ERP25VL electric 4 wheel forklift Load capacity: 2500kg Year of construction: 2013 Operating hours:12825 Lifting height: 3400mm complete cabin with heating Mast type: Duplex Fork side shifter Kdsdpfx Asnl Er Doi Rjr Fork length: 1200mm Special equipment: full cabin with heating Lighting: Full lighting system with hazard warning lights Engine: AC Battery volts: 80V Battery Ah: 620Ah Hawker MotionLine pulse mains charger 80V 100A Battery level approx. 70% Front tires size: 23X10-12 SE Rear tires size: 18X7-8 SE The truck also comes with doors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clear span: 2,700 mm, total length: 45,600 mm, total width: 1,200 mm, total height: 4,500 mm, load per truss pair (max.): 2,370 kg, load capacity per storage section: 12,000 kg, number of shelf rows: 6, Dexion P90 heavy-duty pallet racking systems – galvanized – approx. 45.6 m total length – 24 racking bays – industrial design For sale is a comprehensive package of high-quality pallet racking systems from the manufacturer Dexion, System P90/H, in a galvanized industrial design. The racking systems come from a modern industrial hall and are ideally suited for warehouses, logistics, production facilities, toolmaking, mold making or mechanical engineering. All systems have pallet support rails for Euro pallets and are designed for high loads. The galvanized design provides durable corrosion protection and ensures a long service life even under demanding operating conditions. The sale is preferably as a complete package, but individual sales are also possible. Total scope * 6 complete pallet racking systems * Manufacturer: Dexion * System: P90 / H * Year of manufacture: approx. 2010–2011 * total 24 racking bays * Total length approx. 45,600 mm * Height approx. 4,500 mm * Depth approx. 1,200 mm * total 109 pairs of crossbeams * complete equipment with pallet support rails * partially with impact protection Manufacturer: Dexion System: P90 / H Design: galvanized Crossbeam types: * SLO-089/20 * SLO-102/20 Bay load: * up to 2,370 kg Field load: * up to 12,000 kg Bay height: * up to approx. 1,300 mm Axial dimensions: * 1,800 mm * 2,700 mm Ksdpfxszkuyke Ai Rjdr Racking height: * approx. 4,500 mm Racking depth: * approx. 1,200 mm ⸻ Scope of delivery * 6 complete pallet racking systems * 24 racking bays * 109 pairs of crossbeams * all upright frames * bracing * pallet support rails * back panel mesh (depending on the system) * impact protection (depending on the system) Delivery without stored goods, pallets and other items shown in the pictures. Condition The racking systems come from industrial use and are in a well-maintained, used condition with the usual signs of wear and tear due to age and use. A large part of the systems has been inspected according to DIN EN 15635 by LB Knape or Regal Steger.

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, overall weight: 20,000 kg, saw drive: 55,000 W, Equipment: cabin, documentation/manual, We offer this untested Primultini 1300 complete sawmill (stationary), manufactured in 1989. Manufacturer: Primultini Model: 1300 Year of manufacture: 1989 Condition: untested Category ID: 1389 Type ID: 415 Machine type: Complete sawmill (stationary) Description: Due to changes in plans, I am selling a used Primultini 1300 sawing system with extensive conveying technology. Technical data & equipment: Power: 55 kW Hydraulic carriage Infeed log conveyor Outfeed lumber conveyor 2 transverse conveyors Primultini sharpening system The system is robustly constructed and suitable for professional use in wood processing. The system has been dismantled and is stored in a warehouse. Kdjdpfxeztk Ats Ai Rjr Inspection is possible by appointment. If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Kdodpswvf E Djfx Ai Rsr

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Kodpfx Aieun Sx Ss Rjdr Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 30,000 mm, total length: 65,000 mm, total height: 10,000 mm, GALVANIZED STEEL STRUCTURE FOR A 1,950 M2 WAREHOUSE Industrial warehouse with a floor area of 1,950 m2, designed for a location near the sea, with the following dimensions: DIMENSIONS: Width: 30 m (Exterior). Kdedpfxezuar Te Ai Ror Length: 65 m (Exterior). Height: 10 m (Clear Interior). Two-pitched roof with a 10% slope. Constructed with S 275 grade steel profiles, rolled and galvanized for the main steel structure, and galvanized formed sections for the secondary roof purlin structure. The finish of the Main Structure (Columns, Beams, and Trusses) will be hot-dip galvanized at 450°C according to UNE-EN ISO 1461:2009 standards. In the case of the THC profiles of the Trusses, they will also be galvanized on the inside, ensuring complete protection of this structure, both on the inner and outer faces of all its profiles. INCLUDES: - CE marking for steel structures according to UNE-EN 1090-2:2011. - Detailed engineering, calculation report, structural drawings, and foundation plans. - APPENDIX OF CALCULATIONS APPROVED BY THE ENGINEERS’ ASSOCIATION, complying with data, loads, and assumptions provided by the client. - Certified fasteners for the assembly of the structure. NOT included in the budget: Anchor plates and purlins. These can be manufactured upon request. Transport and packaging not included. Delivery conditions EXWorks, including loading onto a truck – Talleres Ruiz FCA – Pol. La Portalada C/ Nevera, 3 26006 Logroño (La Rioja) - SPAIN - Incoterms® 2020 CE marking and manufacturer's warranty with more than 60 years of experience in the sector.

Condition: used, Year of construction: 2011, functionality: unexamined, Equipment: documentation/manual, IRS Robotics® – Reliability as Standard Established 2002 KUKA KL 1500-2 and KL 1500-3 7th Axis Robot Linear Rail – available in various lengths Includes our warranty. Inspected by our in-house robotics engineers. Brand: KUKA Type: KL 1500-2 and KL 1500-3 Currently available lengths and types (while stocks last): Overall length KL 1500-2 (older generation) = 4400 mm Overall length KL 1500-3 (newer generation) = 15909 mm Optional: We can supply the robot with a KUKA robot. Complete with 7th axis drive unit, including integration into the robot controller, motor, cable chain, grease pump, fully functional and operational. Applicable to the following KUKA robot types (availability upon request): KR 30 to KR 125 KR 150 KR 200 KR 360 KR 500 Kdedpfx Aezh Hfyji Rjr About: Our daily business revolves around the reliable supply of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Established 2002. We ship worldwide.

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Kdjdpsyu Snujfx Ai Ror Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm Kdjdpfxsq E Iras Ai Rer • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: As a conventional diesel engine using heavy fuel oil (HFO); Kedpfx Aijyfflzs Rodr As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: used, Year of construction: 2004, WENZEL SCM 500 Smart Coordinate Measuring Machine in well-maintained and fully functional condition. The machine features a robust and compact design, specifically engineered for flexible use directly in the production environment or inside the measuring room. Combined with high-precision guideways, this proven structure ensures excellent measuring accuracy, stability, and outstanding repeatability within a minimal footprint. The SCM 500 Smart is designed for reliable, fast deployment in quality assurance as well as near-line series production, delivering consistent measuring results even under demanding shop-floor conditions. Prior to delivery, the machine will be fully inspected and subjected to a test run by our service technicians in Remscheid to guarantee complete functionality. The system is currently powered up and can be inspected and demonstrated at any time. PC System & Operating System (Upgraded): The machine is already equipped with a modern, high-performance PC system running the latest Windows 11 operating system. The entire configuration meets the current requirements of WENZEL, has been comprehensively tested, and operates with absolute stability, ensuring the CMM is immediately ready for integration into your processes. Optional Services (Subject to Agreement): - Installation and commissioning of the measuring machine within NRW (North Rhine-Westphalia) - Generation of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Determination of probing uncertainty in accordance with DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training courses for the WM | Quartis measuring software - Contract programming for your components Kdsdpfx Aszkug Rei Rjr Additional Information: Upon request, the machine can be retrofitted with a suitable Renishaw probe system (e.g., PH10 or other upgrade options). The retrofit includes additional services as well as supplementary hardware components, which will adjust the purchase price accordingly. Further software modules, customizations, individual accessories, and clamping systems are available upon request – perfectly matched to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 450 Measuring range Z: 400 mm Measurement uncertainty: Eo = 8,0 + L/250 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2030 PC System: Windows 11 Probing system: TP20 Probe head: PH6 Probe module: 1 × TP20 Standard Force Module Joystick: HT400 Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck

Condition: good (used), Year of construction: 2016, operating hours: 6,580 h, mileage: 61,850 km, Equipment: air conditioning, Very well-maintained "Schmidt" Swingo 200+ sweeper from first owner! (V223) We are pleased to offer you this excellently equipped sweeper from the world-renowned brand "Schmidt," model Swingo 200+, previously owned by the City of Kropp. The sweeper was purchased in 08 / 2016 and is in thoroughly well-maintained condition – it is virtually rust-free and both visually and technically in good shape. Features include a three-brush sweeping system, all-wheel steering, air conditioning, cameras for reverse operation and suction mouth, as well as a nozzle irrigation system. Kedpfx Aiotz Dhxo Rodr The tires have been renewed. A service including an oil change and new coolant for the air conditioning was completed in 09/2024. The entire system is in good visual and technical condition, with no significant damage – everything functions as intended. Normal signs of use such as scratches, paint chips, and abrasions are naturally present but do not restrict usability in any way – see pictures. The vehicle has a total mileage of approximately 35,250 km and 4,630 operating hours. The sweeping distance is 6,100 km or 3,780 sweeping hours. The engine has a total of about 6,580 engine hours. Shipping is carried out within three working days after receipt of payment, insured by freight forwarder. Of course, you may also collect the machine during our regular business hours. The total weight of the system, including accessories, is 3,500 kg. The sale is intended exclusively for commercial customers. You will, of course, receive an invoice, although VAT cannot be separately stated, as this is a public sector sale. Private buyers may purchase the machine “on behalf of the customer”; a direct commercial sale to private individuals is expressly not carried out! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to claims for damages from grossly negligent or intentional breach of duty by the seller, nor for injury to life, body, or health. For any questions about pricing or technical details, please feel free to contact us at the address provided.

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system Ksdpfx Aiszii Dne Rsdr System Characteristics Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (Controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Kjdpey Tp Sijfx Ai Rsdr Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. Kodpjtyy Sfsfx Ai Rsdr In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: used, Year of construction: 2014, A high-performance, fully operational industrial roller coating line by CEFLA. All machines are from the 2014 and operated continuously until the end of 2024 (discontinued only due to the end of production), well-maintained, and ready for immediate integration into production. This setup is perfect for furniture factories, flooring manufacturers, and door producers seeking top-tier automation and flawless surface finishing Line Composition (15 Units Total): Fully operational: Coating & Filling Machines: 4 units - Smartcoater MF-EVO Roller Coaters 1 unit - CEFLA SP1-EVO Roller Filler/Spackling Machine UV Curing Ovens: 2 units - CEFLA UV-R M1 Curing Ovens 2 units - CEFLA UV-R M2 Curing Ovens Transporters: 2 units – CEFLA TB900 Transfer Conveyors Dimensions: 900 x 1580 x Adjustable Height 860–940. Non-operational - for spare parts/repairs: Kjdpfezu Rufsx Ai Rjdr 4 units – CEFLA Smartcoater MF-EVO Roller Coaters

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,000 kg, Equipment: CE marking, Behringer HBP 263 A – Heavy-Duty Automatic Band Saw (Year 2007) For sale: A high-quality, German-engineered Behringer automatic band saw in excellent condition. This machine is well-known for its precision and durability, and this particular unit has been meticulously maintained. The saw is in premium condition and is equipped with top-tier features. Inspection is welcome! Key Features & Options: • Automatic Start with Laser: Significantly reduces setup time (see video at 0:55). • Variable Frequency Drive (VFD): Infinitely adjustable blade speed control (no maintenance-prone variator belts). • Misting/Coolant System: Essential for tube cutting – keeps the environment clean and prolongs blade life. • Automatic Pressure Regulation: Automatically reduces feed pressure for optimal cutting performance. • Chip Conveyor: Automatically keeps the workspace clean. • Blade Cleaning Brush: Extends blade life and enhances cut quality. • Safety Features: Full protection against blade jamming, breakage, etc. Maintenance History: The saw has undergone a comprehensive overhaul, including thorough testing and calibration. Recent service includes: • Control panel and electrical system checks. • Blade guides serviced. • Complete oil change (Gearbox filled with Shell fully synthetic oil = extended service intervals). • All filters replaced. Kdedpfx Aisyv Arne Rer Technical Specifications: • Cutting Capacity at 90° (Round / Square): 260 mm / 260 x 260 mm • Cutting Capacity at 90° (Flat): 300 x 260 mm • Stepless Cutting Speed: 20 – 120 m/min • Saw Band Dimensions: 4,640 x 34 x 1.10 mm • Saw Motor Power: 3.00 kW • Total Power Requirement: 8.00 kW • Min. Cutting Length / Diameter: 10 mm / 15 mm • Machine Weight: approx. 2,000 kg • Dimensions (L x W x H): approx. 2.60 x 1.60 x 1.90 m

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR Kdjdpfx Asy Aggpji Rsr - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 3. STORAGE/FEED TANK - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. 4. HOMOGENIZER/DISPERSING/MIXING TURRAX - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.