Used Immersion Cooler for sale (1,397)

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: AR-D170L2, input voltage: 400 V, input frequency: 50 Hz, Equipment: cooling unit, Unit, Century absorption chiller The unit is currently gassed with nitrogen and has lithium bromide, the whole was disconnected from the installation due to a change in technology, but in a fully functional state. The cooling capacity of the device was rated at 560kW, but after failures it can be about 540kW. In total, we had to plug 4 tubes, thus weakening the unit's power, but this is only a few percent. Hodpfxswl Dzcj Ab Njnl Since November 2024, the unit has been disconnected from the installation and not used.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Hjdpfx Absfz I N Ts Nonl materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Hjdjfz Aw Hepfx Ab Nsnl The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: ready for operation (used), Cooler KUBA Type: SGBE 63-F62 Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 Air flow: 16 800 m3/h Surface: 195 m2 Fin spinning: 7 mm Electric heating Fans: 2 x 630 mm Dimensions: 3020 x 850 x 1000 Refrigerant: Freon Volume: 45 L Hodpfxsh Atf Ie Ab Nsnl Pieces in stock: 5 Stock number: CH 328 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Cooler Guntner Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spinning: 7 mm Hnsdpfxshz T Igs Ab Njl Place for electric heaters Fans: 2 x 660 mm Rpm: 870/650 Dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Volume: 54.8 L Weight: 275 kg Pieces in stock: 4 Reference number: CH259 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: new, Air Cooler, Evaporative Cooler, Indoor Cooling Unit, Used Appliance Hjdpfoqvmzfjx Ab Nonl Manufacturer: Govers Type: ET8 Year: 2004 Dimensions: 2260 x 830 x 260 mm In manufacturer's packaging, new device.

Year of construction: 2016, condition: as good as new (ex-display), Axial fan condenser, air ccoler Manufacturer: Güntner Model: GCVC RD 035.1/12-42-0007305P Year of c.: 2016 Hnsdpfx Absnbff Aj Nel 2 fans Volume: 4,6 l Comressed air: 32,5 bar

Year of construction: 2007, condition: good (used), Description Brand Eco Refrigerazione Model IDE 43B10 ED ID 555804 Status Active Price 1.300 € + VAT Year of manufacture 2007 Location Oradea (RO) Industrial dual discharge unit cooler Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum airflow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (int./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: -35oC. ExWorks. Price is negotiable. Hnjdedxwrpjpfx Ab Nsl Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Hedpfxoucnzwe Ab Nsnl We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, functionality: fully functional, FREEZERS AND COOLERS for supermarkets, mini-markets, coffee shops, etc. Plug-in and ready for use, freezers feature automatic HOT GAS defrosting, fitted with globally-renowned cooling equipment brands, available from 1 to 4 doors. Equipped with heavy-duty wheels for easy installation and removal. FULL GLASS doors with triple glazing for freezers and double glazing for coolers, featuring anti-mold resistant coating. Colored RAL 9005 (full BLACK), R290 refrigerant, with a fully adjustable electronic digital thermostat. Hnodsx I I Huepfx Ab Nol

Condition: new, functionality: fully functional, Drum Cooler CCn -120/70 for powder coatings Main unit, including • Cooling calender with stainless steel cover, steel belt and crusher unit Hnedsw Snfdopfx Ab Njl • Additional edge sealing parts • Stainless steel mainframe, rails Akzo standard • Additional safety switch monitoring working position • Water collecting tank stainless steel • Airknife and rubber scraper • LEV taper in crusher housing top • LEV product outlet funnel • Sliding cover after calender • Lototo Switches with trapped key for crusher and calender hood • Software and Hardware integration of safety switch of safety inlet device incl. safety PLC extension. Safety switch from BBA Innova, all other hardware from customer side.

Condition: new, functionality: fully functional, Cooling capacity • Throughput 800 kg/h • Product inlet temperature 140°C • Product end temperature Hjdpfsw Snbfox Ab Nonl

Condition: new, functionality: fully functional, The BBACooler model CCC-95/60 is a compact drum cooler for cooling and solidifying of viscous products. Cooling capacity Hnsdpfxsw Sm Eps Ab Njl • Throughput 450 kg/h • Product inlet temperature 140°C • Product end temperature

Year of construction: 2023, condition: new, SONDA is an economic solution for gaining an ultrasonic cleaning unit. If you have your own stainless steel tank and want to convert this tank to a ultrasonic washing unit SONDA is the ideal match. We can produce SONDAs regardless of the dimension. What you should do is simply tell us your tank's dimensions and mount the unit to your tank with a simple operation. Operation Principle -Every single immersible SONDA units work with its own separate high frequency generator. -Immersible SONDA units are ready to fix on wall of tank. -Ideal for large tanks in coating and surface treatment. immersible transducer, ultrasonic cleaner, transducer, ultrasonic Hnodpod I E Ivsfx Ab Nsl Please feel free to contact us for technical specifications.

Condition: new, Year of construction: 2023, New - Never Installed Hedpfxoyvunuj Ab Nonl Envistal Flex Air handling units with high flexibility Side-connected air handling unit with integrated controls and a wide range of functional sections. Model - TH-600-AA-2V-1-40-00 Year 2023Max allowable pressure 40.5 bar

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm Hsdpfsw Iqumox Ab Nsnl -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Key Data Machine: TRAUB TNL 18 Year of manufacture: 2015 Condition: Premium grade / Excellent Previous owner: Smith & Nephew; manufacturer of orthopedic implants Machine type: TNL 18, version TNL18-9 Acquisition price (2015): 206,800 EUR Application: Long and short turning operations Manufacturer: TRAUB Drehmaschinen GmbH & Co. KG Control / CNC Control system: TX8i-s with 64-bit RISC CNC/PLC processor USB interface PC connection via fiber-optic cable Color TFT flat-screen Electronic handwheel Software package: Helical / Polyform Thread cutting without compensation chuck Parting-off tool break monitoring Axis / GSP block position shutdown Spindles / Axes / Clamping technology Main spindle with belt drive Hollow clamping cylinder C-axis Change parts for collet F25 Mount for driven and programmable guide bushing Change parts for short turning mode Counter spindle with belt drive Hollow clamping cylinder Hedpfxjyz Dywo Ab Nonl X-Z-C axis Part ejector unit for flushing workpieces from the counter spindle Tool system Lower turret with X-Y-Z-H axis, main drive, 8 tool stations Upper turret with X-Y-Z-H axis, main drive, 8 tool stations Measuring systems / Additional axes Glass scale X-axis top and bottom Glass scale X4-axis Activation for driven and programmable guide bushing Workpiece handling / Peripheral equipment Workpiece discharge unit through the counter spindle Workpiece discharge unit at the front onto parts conveyor belt Hinged belt chip conveyor Manual rinsing unit for working area Connection for central extraction D 150 mm Coolant / Filtration / High pressure Operation with cutting oil Coolant supply 3 / 8 bar Tank: 500 l Compact belt filter on 500-l coolant tank Flow rate: approx. 100 l/min with emulsion or approx. 70 l/min with cutting oil Filtration fineness: approx. 30–40 micron Internal coolant supply up to 30 bar High-pressure coolant pump 120 bar incl. fine filter Immersion cooler for coolant cooling Coolant pump 20 bar Safety / Fire Protection Automatic CO2 fire extinguishing system Operational note: cutting oil EU conformity / CE present Electrics / Documentation Electrical system: 400 V / 50 Hz User documentation available Additional German documents available Magazine / Attachments Attachments for bar feeder magazine Suitable for LNS, FMB, IEMCA Magazine must be equipped for interchangeable operation with shift unit

Condition: good (used), Year of construction: 2021, Hyfra Gamma 13 Active Immersion Cooler, Year 2021, Immersion coolers are designed for the cooling of water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and suitable for integration into various machine layouts. A stirrer ensures uniform medium temperature in the Gamma immersion cooler model. Easy cleaning is facilitated by crane eyes on the cooling unit. The HYFRA Gamma series models are designed as immersion coolers for cooling water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and can be used with a footprint of just 0.5 m². This makes them ideal for integration into different machine layouts. Hnsdoyfutzepfx Ab Njl Thanks to their compact design, cooling capacities of up to 28 kW are possible with only 0.5 m² of floor space. This results in significant flexibility advantages in production floor planning and a marked increase in productivity, as more machines can be accommodated. In the compact models of our immersion coolers, the condenser is installed horizontally. Due to this design, the coolers generate considerably less waste heat. Internal components remain unaffected by residual heat. A robust stirrer ensures uniform medium temperature in the lubricant tank in all immersion cooler models of the series. The HYFRA Gamma series can be easily removed from the tank for regular cleaning using the fixed crane eyes. Immersion Coolers: High-Performance Cooling Directly at the Application Site How does an immersion cooler work? In immersion coolers, the evaporator is immersed directly into the cooling medium. The liquid is held in a tank and is agitated vigorously and continuously for efficient cooling. Powerful stirrers support this process. What are immersion coolers used for? Immersion coolers are commonly used for temperature control of coolant lubricants in filtration and mechanical engineering to ensure the performance of connected equipment. They are also used in metalworking for indirect cooling of tools and workpieces. Typical applications include CNC and conventional machine tools for milling and grinding. Immersion coolers with modern controls and extensive features Depending on the required cooling capacity, HYFRA Gamma immersion coolers are equipped with either FreeSmart or FreeAdvanced control systems. The combination of FreeAdvanced control and a touch panel provides a structured overview and allows real-time monitoring of relevant parameters. Both freely programmable controllers come with multiple digital and analog inputs and outputs. The FreeAdvanced controller also features a full-text display and supports Modbus-TCP.

Condition: excellent (used), Year of construction: 2023, Immersion cooler Deltatherm E 4 Suitable for cooling: oil – emulsion – water Temperature range: 10–40 °C Hnjdpfxox Rrn Is Ab Nsl Several units available

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Hedpfx Aewwv Ifjb Njnl Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 Hodpowx E N Isfx Ab Nsnl MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: used, Year of construction: 1900, functionality: fully functional, volume flow: 6,600 m³/h, final pressure: 2.5 bar, power: 610 kW (829.37 HP), input voltage: 6,600 V, input current: 69 A, type of input current: AC, 2 pieces of cooling water pumps. Vertical column pipe pumps with open screw impeller Manufacturer: KSB Type: SEZ N 8-60 Impeller design: Open screw impeller Number of impellers: 1 Immersion depth: 2550 mm Shaft seal: Mechanical seal Radial bearing: RESIDUR fiber ceramic Support bearing: Segment slide bearing Cooling: Self-cooling with CuNiFe cooler Speeds: 745 / 600 / 496 rpm Flow rate: 6600 / 5750 / 4750 m³/h Delivery head: 25 / 15.5 / 10.5 meters Shaft power: 525 kW / 280 kW / 180 kW Pump efficiency: 85.7% Pumped medium temperature: 20°C NPSH: 8.0 m Casing: S235JRG2 Shaft: 1.4313 Impeller: 1.4409 Impeller diameter: 766 / 571 mm Electric motor: Siemens 1LA44548 AW94Z Power: 610 kW Voltage: 6600 Volt Current: 69 Ampere Including frequency converter Dimensions: Discharge nozzle: DN 800 Pressure rating: PN 10 Hjdsxb Tvxspfx Ab Nsnl Pump weight without motor: 4100 kg Length with motor: 7723 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main Spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Switching time 90°: 2.5 sec Pallet changeover time: 6.0 sec Tool Changer Number of tool positions: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent magazine slots free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS CNC control: MSC 502 Total power requirement: 63 kVA Hnedjy R U Ecspfx Ab Njl Dimensions & Weight Footprint approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling device High-pressure coolant system Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: Shaft for loading must be provided by the buyer.

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: 360420, (COMPLETE SYSTEM)(NEW)(UNUSED) Methane Gas Purification System (Separation of natural gas by means of dehydration, moisture extraction and separation) Brand PSB INDUSTRIAS INC. Model X-1060-SP, Series 360420. Year 2017. Operating Inlet Temperature 90F, Methane W/5444SCFM 600 PSI, 460 Volts. Includes: One Demethanizer Columns, Two Molecule Dehydrator Columns, Ricsa Brand Demethanizer Accumulator, Reflux Demethanizer Pump. Power system, gas cooler regeneration system. Documentation included. Made up of lots: 441/274, 442/275, 443/276, 444/277, 445/278, 446/279, 447/280. 448/281, 452/282. (NUEVO) Sistema de purificación de Gas Metano (Separación de gas natural por medio de deshidratacion, extracción de humedad y separación) Marca PSB INDUSTRIAS INC. Modelo X-1060-SP, Serie 360420. . Año 2017. Temperatura de entrada de operación 90F, Metano W/54 44SCFM 600 PSI, 460 Voltios. Incluye: Una Columnas Demetanizadora, Dos Columnas Deshidratadoras de moleculas, Acumulador Demetanizador Marca Ricsa, Bomba de Demetanizador de reflujo. Sistema de alimentación, Sistema de regeneracion enfriador de gas. Documentación Incluida. Integrado por lotes: 441/274, 442/275, 443/276, 444/277, 445/278, 446/279, 447/280. 448/281, 452/282 Este lote se venderá al mejor postor, ya sea de manera individual (INDIVIDUAL) o como sistema completo (COMPLETE SYSTEM), adjudicándose en la modalidad que genere el mayor valor de venta. / This lot will be sold to the highest bidder, either individually (INDIVIDUAL) or as a complete system (COMPLETE SYSTEM), and will be awarded in the mode that generates the highest sales value. Hsdpfx Aboy Sim Re Nenl

Year of construction: 2018, condition: new, machine/vehicle number: 10880/2146-6R-ET, (COMPLETE SYSTEM) (NEW) (UNUSED). System 2018 SPX Dry Cooling - Forced Air Fin Cooler Pahapur Brand Heat Exchanger Type 10880/2146-6R-ET. Made in Switzerland, each section includes 11 rows of 1” Dia x 60” L, Surface/Item-Finned tube (m2) 24900 - tube (m2) 1074.8 MTD, Eff. (Deg. C) 7.9 (MegaWatts) 7.5346. Service Transfer rate-Finned (W/m2-K) 38.420. Pressure 0/7 BAR. Temperature 99 °C. Ambient temperature -12 +44 °C. Volume capacity 1450 L. Comprised of lots 108, 109, 110, 111, 112, 123, 114. Hjdpfx Aoy Simdob Njnl (NUEVO) (SIN USO). Sistema SPX Dry Cooling 2018 – Enfriador de aletas por aire forzado. Intercambiador de calor, tipo 10880/2146-6R-ET. Fabricado en Suiza. Cada sección incluye 11 filas de tubos de 1” de diámetro x 60” de largo. Superficie/elemento: tubo aletado (m²) 24,900 – tubo (m²) 1,074.8 MTD. Eficiencia (°C) 7.9. Capacidad (Megawatts) 7.5346. Tasa de transferencia de servicio – aletado (W/m²-K) 38.420. Presión 0/7 BAR. Temperatura 99 °C. Temperatura ambiente -12 a +44 °C. Capacidad de volumen 1450 L. Integrado por los lotes 108, 109, 110, 111, 112, 113 y 114. Incluye hojas técnicas.