Used Impact Protection for sale (16,031)

Condition: used, mileage: 19,610 km, power: 124 kW (168.59 HP), first registration: 02/1987, overall weight: 7,490 kg, fuel type: diesel, color: blue, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, total length: 7,100 mm, total width: 2,500 mm, total height: 2,990 mm, number of seats: 6, Equipment: all wheel drive, parking heater, ++ Long Doka ++ Power steering ++ Top condition ++ 7.5 tons with H-certificate ++ +++ Originally only 19,610 km +++ LA 911 B with a long double cab and a 170 hp turbo engine, all-wheel drive 4x4 and power steering, Nwodpfx Aijv Hkp Ro Ton directly from the Federal Agency for Technical Relief (THW), regularly maintained, 9 seats all with seat belts, tow hitch with a braked trailer load of 10,450 kg, transfer case with off-road reduction and 2 differential locks (center and rear), technically in good condition and ready to drive. This MB 911 is in very good original condition. Technically, the truck has received new wheel brake cylinders on the rear axle, a fresh inspection with lubrication, brake fluid service, and a check of all fluid levels. The starter batteries have also been replaced, as well as the two fuel filters and the cartridge of the air dryer. For private registration, a technical modification of the vehicle type would still be necessary. This would require retrofitting with side impact protection and underrun protection. The new main inspection with H-certificate is already included in the purchase price. +++ Errors, changes and prior sale reserved +++ + 003 +

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, TECHNICAL DETAILS General Information Type of machine: Electric forklift, 3-wheel Manufacturer: Linde Model: E 15 Z-02 Year of manufacture: 2006 Operating hours: 3,530 h Condition: ready for operation Own weight: 3,097 kg Lifting Performance Load capacity: 1,500 kg Lifting height: 3,750 mm Mast: Standard (2W375) Fork carriage: FEM 2A Fork length: 1,100 mm Drive and Battery Nsdpfjz Scr Djx Ai Tewn Drive: Electric, 24 V Battery voltage: 24 V Battery capacity: 805 Ah Battery year of manufacture: 2022 Battery charger: single-phase, 24 V, 50 A, not tested Tires Front tire: Superelastic, black, 18 × 7–8 Rear tire: Superelastic, black, 15 × 4.5–8 Front tire condition: 60 % Rear tire condition: 0 % Dimensions Overall length: 1,850 mm Overall width: 1,050 mm Overall height: 2,300 mm Structural height: 2,300 mm Sales Information Minimum price: none Sale: guaranteed to the highest bidder EQUIPMENT Side shifter 3rd valve Work light, front Roof protection Windshield Impulse control

Condition: like new (used), functionality: fully functional, number of ink cartridges: 4, color channels: 4, number of print heads: 5, resolution (max.): 1,200 dpi, number of feeding trays: 1, total length: 6,000 mm, total width: 2,255 mm, total height: 1,600 mm, space requirement length: 10,000 mm, space requirement width: 5,255 mm, type of input current: AC, input current: 32 A, input voltage: 400 V, Equipment: documentation/manual, raster image processor, Konica Minolta PKG-1300 – single-pass inkjet printer for corrugated board (demo unit) Demo unit, fully functional, used only for testing. Price includes a new set of 5 printheads (boxed, unused). Videos of the machine in operation available on request. The machine can be inspected and tested in person. The Konica Minolta PKG-1300 (manufactured by MTEX NS as NS Multi 1300) is an industrial single-pass digital packaging printer offering high print quality, automated feeding and stacking, and efficient production of short and personalized runs. It prints on flat and pre-die-cut corrugated boards as well as folding carton. It is ideal for printing houses, packaging manufacturers and companies looking for a flexible solution for printing on cardboard. Applications: shipping boxes, e-commerce and food delivery boxes, gift and custom boxes, promotional and display packaging, prototypes, short and personalized runs for e-commerce, FMCG and private labels. Benefits: on-demand printing, packaging personalization, fast turnaround of short runs, reduced prepress and production costs. Printer: Technology: single-pass inkjet, 5 HP PageWide printheads, water-based CMYK pigment inks (5-litre tanks) Resolution: 1200 × 1200 dpi; 600 × 1200 dpi; 300 × 1200 dpi; drop size 5 pL Print speed: 9 m/min (high resolution), 18 m/min (medium), 27 m/min (low) Max. imaging width: 1070 mm Media: flat and pre-die-cut corrugated boards, 1–50 mm thick Media size: min. 300 × 400 mm, max. 1300 × 1600 mm (W × L) Dimensions (H × W × D): 1600 × 2255 × 1250 mm, weight 1200 kg Automatic feeder Feeding speed up to 27 m/min, max. feed stack height 400 mm Dimensions (H × W × D): 1360 × 2255 × 1600 mm, weight 750 kg Exit table with hot-air dryer Dimensions (H × W × D): 950 × 2255 × 600 mm, weight 300 kg Automatic stacker: Stacking speed up to 27 m/min, max. stack height 700 mm Dimensions (H × W × D): 1310 × 2255 × 1990 mm, weight 1150 kg Nwsdpfoz R S Acjx Ai Ton Key features: Head cleaning with individual selection of printheads and colour channels Multiple media sensors across the width for flexible media placement 5-belt vacuum transport with individually switchable air flow and adjustable suction Printhead protection roll against media impacts Ionizing media cleaning system to reduce dust and extend printhead life Power and utilities: Single power connection for the complete system: 400 V, 3-phase, 50 Hz, 32 A Power consumption: printer 8000 W, web cleaner 5500 W, feeder 3500 W, stacker 3500 W Feeder and stacker each require RCCB 4P, 40 A, 300 mA, C, 10 kA (customer side) Compressed air: 6 bar, 50 l/min, 8 mm OD hose (customer side) Software: PC/Windows (PC included), PKG-1300 user interface, Ergosoft RIP. Internet connection required 24/7. Operating environment: 20–30 °C, 50–70% RH (non-condensing). Footprint: approx. 2200 × 6000 mm (W × L) plus vacuum cabinet. Recommended clearance: 2000 mm front, back and left side, 1000 mm right side. Delivery: shipped on original pallets. Assistance in arranging transport is available. A forklift is required for unloading. Terms: wholesale offer, sold without warranty. Price negotiable.

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, Daily registration in 06/2024 due to the new TPMS regulation Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly slanted with "Load-Lock profile" for tensioning belt attachment 24 ton. 2-speed support winch, one-side operation Nwsdpfxori Hiho Ai Ten Side impact protection aluminum Underrun protection galvanized steel Quarter-shell fenders in front of and behind axle unit with anti-spray splash flaps according to EC Ram protection at the rear Spare wheel holder for 1 electric bike, with wheel mounting kit Axles + suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axle/chassis" Reduction in tire wear incl. and fuel consumption 1st axle automatic lift axle, can also be operated electrically from the truck including forced lowering and starting aid, without truck installation Brake system 2-line compressed air Brake system Spring-loaded parking brake EBS made by Wabco, electronic braking system with EBS socket at the front, without connecting cable with lifting & lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on display Wheels and tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear 2 x 7-pin and 1 x 15-pin, non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light Floor Screen-printed panels approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall Plug-in slats 5 Rows of aluminum V-slats 2 pairs of Vario steel slats, in conjunction with Vario beams for securing loads at the front and rear, then no need for slats in the area of the steel slats Rear portal doors, 2-winged, each with 2 internal espagnolette locks Tarpaulin, with welded-in horizontal and vertical straps Empty weight: 5,960kg Offer and images subject to change

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Equipment: center pivot plate, Archive images! Chassis: Steel welded construction, double-curved with low-bed at the front and rear of the axle assembly, low-bed inclined for easy access, turntable with robust ball bearing race, foldable rear support, shims, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed / rear axle: 6 pairs of lashing points on the side in the low-bed, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm, or instead of stake pockets, 5-ton ring lashing points embedded in the floor. Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lights, 2 white position lights at the front 2 white/red marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable plugs at the front Floor: front curve with steel/diamond plate surface, storage compartment embedded in the ramp incline, driving area and in the middle between the beams with steel/diamond plate surface, rear incline with 70 mm softwood floor, low-bed platform including rear incline 5900 mm Ramps: attachment rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Nwsdpfx Asi Ri N Uoi Tjn Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Condition: used, functionality: fully functional, machine/vehicle number: VAVKSK339SZ542526, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 06/2027, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 24 m³, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5", tire condition: 100 %, color: grey, Year of construction: 2025, The images are archive photographs; the vehicle may still be in use. #Chassis -Welded steel chassis construction with rear tipping axle in weight-optimised lightweight design -Replaceable 2" kingpin -Frame designed for an unladen fifth-wheel height of approx. 1200 mm – approx. 1250 mm with air-suspended tractor unit -Support legs: mechanical steel landing legs, 2 x 12 t, single-side operation (right) #Axles -SAF-Intradisc-B9 axles with disc brakes / 430 mm -3 axles -Front axle automatically liftable = raises and lowers depending on load; also with forced lowering incl. integrated speed-limited start-off aid -Note: loading height/overall height increases by approx. 50 mm! #Electrics -15-pin socket: PIN 12 -7-pin socket: PIN 6 (positive-switched) #Wheels -6 tyres 385/65 R22.5", 6 aluminium wheels #Braking system / Suspension -Two-line air brake system -Brakes: Knorr make -EBS system -Brake/air connections with 2 single coupling heads, yellow/red -EBS/ABS socket, front -Electronic air suspension with automatic lowering device via induction switch and additional lowering lock-out via rotary switch on the semi-trailer -Without raising and lowering system -Without connecting hoses/cables to the towing vehicle #Assistance / Safety systems -Axle load display via EBS CAN bus signal, shown on the display in the cab -Tyre pressure monitoring with sensor in the wheels, shown on the display in the cab #Body -Steel body with reinforced floor plate made of special steel HB 450 (Hardox or comparable material) and reinforced top rail -Floor thickness 5 mm = continuous floor plate, wall thickness 4 mm -Front and rear walls sloped, flush all round at the top -Access steps inside the body, front left -Steel pivoting tailgate with recessed mounting and automatic mechanical 2-hook central locking, tailgate with internal discharge chute #Hydraulics -Without hydraulic connecting lines to the tractor unit -High-pressure front hoist for rear tipping #Tarpaulin -Plastic roller tarpaulin incl. aluminium tube with hand crank, without customs seal -1 removable cross support and stop bracket on the right for the roller tarpaulin -Locking device for the rolled-up tarpaulin -Tarpaulin fastening on the left (direction of travel) with 3 mounting brackets and central tensioning device at the front, without tensioning straps (quick-release fastener on the top rail); tarpaulin colour similar to RAL 9006 white aluminium #Lighting / Electrics Nsdpozm Ipkofx Ai Tswn -24-volt lighting system -2 full-LED multi-chamber rear lights -2 LED position lights, front -2 LED outline marker lights, rear -Flashing LED side marker lights -2 LED number plate lights -2 x 7-pin sockets -1 x 15-pin socket -Without electrical connecting cables to the tractor unit #Accessories / General -3 pairs of plastic individual-wheel mudguards, without spray suppression, foldable mud flaps at the rear -Folding aluminium trapezoidal rear underrun protection, unpainted with steel bracket, in accordance with EU directive -2 wheel chocks -1 tow hook bolted to the frame member, on the right (direction of travel) -Noise dampers = rubber pads -Steel standing platform with aluminium safety grating, guard rail and foldable access ladder on the left (direction of travel), bolted to the chassis frame at the front -Without side impact protection Please note: archive photographs

Condition: used, machine/vehicle number: NP8FA99W3N0000318, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres Nwedpozyf Uqefx Ai Ten - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035492, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 04/2027, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 80 %, color: silver, Attention: the pictures are archive images. The vehicle may be in use! #Container semi-trailer chassis - Fine-grain steel welded construction, gooseneck plate with replaceable 2" kingpin and 2 kingpin positions - Container positions: - Rear extension retracted: - 1 x 20 ft or 1 x 30 ft flush with rear - Central telescope stage 1, rear extension extended stage 1: - 2 x 20 ft or 1 x 40 ft with gooseneck tunnel - Central telescope as nested central tube frame with pin locking - Front cross member with folding locks (not available with front extension) - Without rear height adjustment and without folding centre supports; transport of containers without tunnel not possible - Rear extension mounted on rollers, with hand crank - 24 t 2-speed landing gear, one-side operation, with semi-round feet and straight mounting plate, with thrust compensation - 2 wheel chocks with holder - Side underrun protection, aluminium - Underrun protection, galvanised steel - Extendable underrun protection for 45 ft containers - Half-shell mudguards - with anti-spray mud flaps according to EC - Rear impact protection #Axles + suspension - BPW disc brake axles with 430 mm disc diameter - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Staggered axle spacing 1410/1310 mm (combined transport) up to 44 t gross combination weight - Air suspension - 1st axle automatic lift axle, incl. forced lowering and traction help, activation "3x braking" (traction help functions up to 30% axle load excess and up to max. 25 km/h) #Braking system - 2-line compressed air braking system - Colour-coded line routing for easy servicing - Spring brake parking brake - Tele Control - Axle load relief for easy telescoping - 2 mismatch-proof coupling heads at front, without connecting line - EBS, electronic braking system with EBS socket at front, without connecting cable - Test connection for brake cylinder pressure on EBS module routed to the outside - Attention: the trailer may only be towed by towing vehicles that ensure ABS effectiveness! - with raise & lower valve + auto-reset function - Vehicle driving stability system - Axle load detection via EBS CAN bus signal for display in the driver's cab; truck must be prepared accordingly, nothing installed on the tractor unit (not a calibrated scale) #Wheels and tyres - 385/55 R22.5", make at manufacturer's choice - Steel rims, factory silver #Electrics Nwedoz Nglhspfx Ai Tsn - 24 V, 4 x 3-chamber lamps + 1 round reversing light + 1 round rear fog light, full LED with resistor, yellow LED side lighting, LED number plate lighting (note: with certain towing vehicles false diagnostics may occur although the function is given) - 2 white LED front position lights - 2 white/red LED outline marker lights at rear - 1 x 15-pin socket at front, without connecting cable - 2 additional LED work lights at rear, switched via reversing light Attention: archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,020 kg, maximum load weight: 28,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 1,060 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Year of construction: 2026, Equipment: VDI 2700 certified, Curtainsider Mega Tailor-made transport solution Configure your Fliegl vehicle to suit your requirements. The vehicle shown is an example. Production and equipment are customised individually to customer specifications. #Chassis for haulage semi-trailers - With "Preload" slight pre-tension in the gooseneck area, fifth-wheel plate with replaceable 2" kingpin - Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps - Note: free landing gear corner clearance / free rearward swing radius approx. 1,930 mm - Pull-out ladder at rear - Optionally with patented "Fliegl D-Lock" door holder - 2 wheel chocks with holder - Aluminium side underrun protection - Galvanised steel rear underrun protection - Quarter mudguards in front of 1st axle and behind each axle - Rear corner impact protection - Optionally with pallet stop on both sides, approx. 20 mm high, bolted version #Axles + suspension - Disc brake axles - Laser-aligned axles/running gear: reduced tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system - Colour-coded lines for easy servicing - Spring brake parking brake - 2 mismatch-proof coupling heads at front - 24 V EBS, electronic braking system with EBS socket at front - With raise/lower valve + auto-reset function - Vehicle stability system #Wheels and tyres - Tyre size 435/50 R19.5" - Optionally aluminium rims #Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - 2 white front position lights - 2 white/red outline marker lights at rear - 2 x 7-pin and 1 x 15-pin mismatch-proof sockets at front - Optionally with additional work lights at rear, on landing legs or in the interior #Floor - Film-faced plywood approx. 30 mm thick on longitudinal bearers for high point load capacity, forklift axle load up to max. 7,100 kg #Front wall / front corner posts - 2,580 mm high, heavy-duty steel corner posts, release device for side curtain at front wall - "Crash-Blocker", bottom inside at approx. 140 mm height with steel impact protection #Rear wall / rear corner posts - Steel rear corner posts up to lower edge of roof, curtain attachment with round tube and curtain tensioning ratchet - Rear portal doors, double-wing, each with 2 internal espagnolette locks - Patented Fliegl "I-Lock" door lock – winner of the iF Design Award #Curtain - With welded-in vertical straps - 5 rows of aluminium or wooden insertion slats Nwsdpjz Snwwefx Ai Tsn #Roof - Sliding roof, rear end bow folds up, roof cover slides from rear to front, curtain colour: white - Optimised rain gutter at rear, at top of rear bow, above the doors - Mechanical or hydraulic lifting roof #Optional - Fliegl manufacturer's certificate for body strength to EN 12642 XL (for payload up to max. 27,000 kg) - Fliegl manufacturer's certificate for body strength to DL 9.5, pallet stop on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm (pallet stop not in combination with dropsides) (for payload up to max. 27,000 kg) - Fliegl manufacturer's certificate for load securing to VDI 2700 sheet 12 ff., pallet stop on both sides, approx. 20 mm high - Rear marking plates to ECE-70 - Also available with various load securing options, as 2-axle version and as Xtra-Long Attention: archive images

Condition: used, empty load weight: 6,460 kg, axle configuration: 3 axles, first registration: 02/2018, next inspection (TÜV): 01/2027, tire size: 445-45 R19.5-445-45 R19.5, Year of construction: 2017, mileage: 711,924 km, Ref: F0801127 Equipment: * Air connection: Red/yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarp, * Side sliding tarp, * Lifting roof, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 32 VIN: WKESD00000801127 Tire size: 445-45 R19.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Njdpj Ad Rprofx Ai Tjwn Height: 4.09m Internal height: 3m

Condition: used, empty load weight: 6,460 kg, axle configuration: 3 axles, first registration: 02/2018, next inspection (TÜV): 09/2027, tire size: 445-45 R19.5-445-45 R19.5, Year of construction: 2017, mileage: 694,648 km, ref: F0801128 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Sliding cover, * Side sliding tarpaulin, * Lifting roof, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 32 Nwjdpfx Aij Ad Rpls Ton VIN: WKESD00000801128 Tire size: 445-45 R19.5 Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.09 m Internal height: 3 m

Condition: excellent (used), BLB GmbH, supplier of new and used warehouse technology. You can obtain shelving systems, industrial trucks, accessories and other warehouse inventory from us. In this ad you buy as follows: Used pallet racking / Manufacturer Meta Plug-in system with pre-assembled frame, very quick assembly Positioning : 10 x rack bays with 4 x pairs of beams per bay Njdpep I E Taofx Ai Town Bay width 2700mm / beams 120 x 50mm / color black Quantity scaffolding 11 pieces Frame height approx. 7,500mm / depth 1100mm / painted black / pre-assembled 80 pcs. cross beams 120 x 50mm, painted black, incl. safety pins The display is available 2 x ! MORE - SMALL QUANTITIES POSSIBLE ! PLEASE ASK FOR YOUR DESIRED QUANTITIES Further accessories available for an extra charge ground anchor Impact protection Crash barrier Wire mesh Net price: 2950€. ex warehouse Weißenhorn, invoice with VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please ask for your transport costs.sale of used goods without guarantee & warranty. Errors / prior sale of used goods expressly reserved.

Condition: new, maximum load weight: 29,100 kg, overall weight: 36,000 kg, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Krone curtainsider trailer with Dhollandia tail lift 2 tonnes Tail lift model: DHSMR.20 General Information Vehicle type: SDP 27 eLB50-CS * Chassis no.: WKESD000001211903 * 3-axle semi-trailer * Registration: Germany * Quantity: 2 vehicles Weights: * Permissible fifth wheel load: 12,000 kg * Permissible axle load: 24,000 kg * Permissible gross weight: 36,000 kg * Technically possible: 39,000 kg --- Dimensions * Cargo space length: 13,620 mm * Cargo space width: 2,480 mm * Coupling height unladen: 1,150 mm * Rear loading height: 2,700 mm * Vehicle height unladen: approx. 4,015 mm --- Chassis and Frame * Welded ladder frame * Multi-Lock outer frame (load securing every 100 mm) * 2" kingpin * Rear access ladder * Door retainers --- Axles and Technology * 3 x 9,000 kg KRONE axles * Air suspension * 430 mm disc brakes * Lift axle (1st axle can be operated automatically and manually) * Starting aid * 6-year axle warranty (EU, on-road) --- Tyres * 385/65 R22.5 * Without spare wheel * KRONE Smart Tyre Monitoring (tire pressure and temperature) * Telematics-ready --- Brake System * EBS system (Wabco) * ABS * Vehicle stabilization * Spring-loaded parking brake * 2 wheel chocks --- Lighting * Full LED * Multifunction rear lights * LED side marker lamps with indicator function * 7-pin and 15-pin sockets --- Body * 30 mm waterproof floor (forklift axle load up to 7,000 kg) * KRONE sliding roof * Continuous aluminium outer rails * PVC tarpaulin 850 g/m² * ADR roof tarpaulin * Tarpaulin color: RAL 9006 White Aluminium --- Rear and Doors * Steel container doors * One-hand operation * Double locking bar system * Rear frame with ratchet --- Load Securing * Certificate EN 12642 Code XL * Beverage certificate VDI 2700 * 3 pairs of central stanchions * 4 sets of aluminium insert slats * Pallet stops left and right --- Accessories * Toolbox * Rear impact protection profiles * ECE-R70 warning plates * QR code Smart Assistant Nwedpfx Aijykxmve Tjn --- For further information, we are happy to assist you.

Condition: used, Nagy PB-80 Add-on Bay for Pallet Racking With a standard pallet height (1.20 m), you can install 6 beam levels in the 10.3 m high add-on bay. Together with the storage locations on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet locations per rack bay with 4 pallets per bay. Material & Construction: The galvanized surface provides long-lasting corrosion protection. The bolted truss (diagonal and cross braces) allows for the easy replacement of individual components in the event of damage (e.g., from forklift impacts), unlike welded frames. Profile: The profile dimension of 80 x 60 mm is a typical dimension for medium to heavy-duty pallet racking uprights, to ensure the necessary buckling stiffness at over 10 meters in height. Manufacturer: Nagy Type: PB-80 Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Truss: bolted Upright surface: galvanized Clear bay width: 3.60 m Beam: 3600 x 120 x 45 mm Beam surface: blue painted (RAL 5015) Number of bays: 1 add-on bay Number of levels: 7 incl. floor location Max. pallet weight: 500 kg Permissible bay load: 2000 kg Permissible bay load capacity: 12000 kg Pallet locations: 28 Scope of supply: 01 x Upright approx. 10.30 x 1.10 m, galvanized 12 x Beam approx. 3.60 m, blue, incl. safety pins Your partner for safe warehouse logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed professionally and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a conversion, or a warehouse liquidation – we take over the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Warehouse mezzanines for optimal use of space Rack inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (according to DGUV rule 108-007): - Inspection for deformations and damage. - Check of safety pins and load signs. - Creation of a legally sound test report including test label. Nwjdpfx Aieyvr Dge Ten We would be happy to offer you a suitable bank financing for your project. More pallet racks - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Ideal for refueling any type of commercial vehicle, agricultural vehicle, construction site vehicle, or machine. Optimally suited for transport in combination vehicles or on small trucks or pickups. Pump Specifications: - 4 m cable with battery clamps - 4 m delivery hose, G 1"a - Automatic dispensing valve with type approval, with swivel joint, G1"i - Suction hose and suction pipe with foot valve Tank Specifications: Njdps Abqqkjfx Ai Tswn - Single-walled transport tank (7 mm wall thickness) with precision level indicator and ADR approval for tank and pump. - Protective cover, curved for reliable drainage of rainwater; weatherproof thanks to integrated drain channels - Can be lifted with standard shackles according to DIN – accessible with all commercially available forklifts - Impact-resistant and shatterproof construction for robust use – diffusion-tight and UV-stable - Shatterproof up to -15°C and 2 bar – can be locked with a tank lock - Leak-proof venting valve (double spring mechanism) - Filling: G 2' filling nozzle with leak-proof bayonet closure Delivery rate with free discharge: 35 l/min Motor data: Tank material: LLDPE (linear low-density polyethylene) Voltage: 12 V DC Installed counter, digital: Tank: Mobimaster Delivery media: Heating oil and diesel fuels Empty weight: 45 kg Delivery pressure: 1.6 bar Dimensions L x W x H: 1200x800x912 mm Temperature range: -10 +60 °C Protection class: IP 54 Manufacturer: FMT Swiss AG Connection cable length: 3 m Torque: 0.38 Nm Pump: Display: 4-digit, with 2 decimal places Speed: 3300 rpm Fuse: 25 A plug fuse Pump type: Vane pump, self-priming Power: 0.22 kW Current consumption: 18 A Tank capacity: 450 L Connection: G 3/4" i, with adapter to G 1" a

Condition: new, Ideal for refueling any type of commercial vehicle, agricultural vehicle, construction site vehicle, or machine. Optimally suited for transport in combination vehicles or on small trucks or pickups. Pump Specifications: - 4 m cable with battery clamps - 4 m delivery hose; G 1”a - Automatic dispensing valve with type approval; with swivel joint; G1”i - Suction hose and suction pipe with foot valve Tank Specifications: - Single-walled transport tank (7 mm wall thickness) with precision level indicator and ADR approval for tank and pump. - Protective cover; curved for reliable drainage of rainwater; waterproof due to integrated drain channels - Can be lifted with standard shackles according to DIN – can be handled with all commercially available forklifts - Impact-resistant and shatterproof construction for robust use – diffusion-proof and UV-resistant - Shatterproof up to -15°C and 2 bar – can be locked with a tank lock - Liquid-tight vent valve (double spring mechanism) - Filling: G 2' filling nozzle with leak-proof bayonet closure Voltage: 24 V DC Fuse: 25 A plug fuse Speed: 3500 rpm Current consumption: 13 A Unladen weight: 45 kg Connection: G 3/4" i, with adapter to G 1" a Tank: Mobimaster Dimensions LxWxH: 1200x800x912 mm Motor data: Delivery pressure: 1.6 bar Manufacturer: FMT Swiss AG Tank material: LLDPE (linear low-density polyethylene) Delivery media: Heating oil and diesel fuels Display: 4-digit, with 2 decimal places Connection cable length: 3 m Power: 0.32 kW Pump type: Vane pump, self-priming Tank capacity: 450 L Protection class: IP 54 Installation meter, digital: Pump: Torque: 0.6 Nm Temperature range: -10 +60 °C Delivery rate at free discharge: 35 l/min Nwjdpfo Abqq Rox Ai Ton

Condition: new, Ideal for refueling any type of commercial vehicle, agricultural vehicle, construction site vehicle, or machine. Optimally suited for transport in combination vehicles or on small trucks or pick-ups. Pump Specifications: - 4 m cable with battery clamps - Suction hose 4 m, G 1"a - Automatic dispensing valve with type approval, with swivel joint, G1"i - Suction hose and suction tube with foot valve Tank Specifications: - Single-wall transport tank (7 mm wall thickness) with precision level indicator and ADR approval for tank and pump. - Protective cover, curved for reliable drainage of rainwater; waterproof due to integrated drainage channels Nodpj Abqrnsfx Ai Tjwn - Can be lifted with standard shackles according to DIN – can be handled by all common forklifts - Impact-resistant and shatter-proof construction for robust use – diffusion-proof and UV-resistant - Shatter-proof up to -15°C and 2 bar – can be locked with a tank lock - Leak-proof venting valve (double spring mechanism) - Filling: G 2" filler neck with leak-proof bayonet closure Empty weight: 23 kg Manufacturer: FMT Swiss AG Tank: mobiFITT Display: 4-digit, with 2 decimal places Fuse: 25 A plug-in fuse Media: Heating oil and diesel fuels Installation meter, digital: Temperature range: -10 +60 °C Tank capacity: 125 L Protection class: IP 54 Connection cable length: 3 m Pump type: Vane pump, self-priming Voltage: 12 V DC Tank material: LLDPE (linear low-density polyethylene) Motor data: Delivery pressure: 1.6 bar Current consumption: 18 A Delivery rate at free discharge: 35 l/min Pump: Dimensions L x W x H: 1002 x 654 x 369 mm

Condition: new, Ideal for refueling any type of commercial vehicle, agricultural machinery, construction site vehicles, and equipment. Optimally suited for transport in combination vehicles or on small trucks or pickups. Pump specifications: - 4 m cable with battery clamps - 4 m delivery hose, G 1”a - Automatic dispensing valve with type approval, with swivel joint, G1”i - Suction hose and suction pipe with foot valve Tank specifications: Nedpfo Abqr Ujx Ai Tswn - Single-walled transport tank (7 mm wall thickness) with a precision level indicator and ADR approval for the tank and pump. - Protective cover, curved for reliable rainwater runoff, rainproof thanks to integrated drainage channels - Can be lifted with standard shackles according to DIN – can be moved with all commercially available forklifts - Impact-resistant and shatterproof construction for robust use – diffusion-proof and UV-resistant - Shatterproof up to -15°C and 2 bar – can be locked with a tank lock - Leak-proof venting valve (double spring mechanism) - Filling: G 2' filling nozzle with leak-proof bayonet closure Power consumption: 13 A Tank: mobiFITT Protection rating: IP 54 Tank capacity: 200 L Delivery media: Heating oil and diesel fuels Connection cable length: 3 m Manufacturer: FMT Swiss AG Delivery rate at free discharge: 35 l/min Empty weight: 26 kg Pump type: Vane pump, self-priming Fuse: 25 A plug fuse Voltage: 24 V DC Motor data: Dimensions L x W x H: 1010x654x534 mm Tank material: LLDPE (linear low-density polyethylene) Pump: Delivery pressure: 1.6 bar

Condition: new, Ideal for refueling any type of commercial vehicle, agricultural vehicle, construction site vehicle, or machine. Optimally suited for transport in combination vehicles or on small trucks or pick-ups. Pump specifications: - 4 m cable with battery clamps - Suction hose 4 m; G 1”a - Automatic dispensing valve with type approval; with swivel joint; G1”i - Suction hose and suction pipe with foot valve Tank specifications: - Single-walled transport tank (7 mm wall thickness) with precision level indicator and ADR approval for tank and pump. - Protective cover, curved for reliable drainage of rainwater; weatherproof thanks to integrated drainage channels - Can be lifted by crane using standard shackles according to DIN – accessible with all common forklifts - Impact-resistant and shatterproof construction for robust use - diffusion-proof and UV-resistant - Shatterproof down to -15°C and 2 bar – can be locked with a tank lock - Leak-proof venting valve (double spring mechanism) - Filling: G 2' filling nozzle with leak-proof bayonet closure Installed flow meter, digital: Tank: mobiFITT Protection class: IP 54 Flow rate at free outlet: 35 l/min Temperature range: -10 +60 °C Connection cable length: 3 m Manufacturer: FMT Swiss AG Tank material: LLDPE (linear low-density polyethylene) Pump: Pumping media: Heating oil and diesel fuels Nwsdo Abqt Eepfx Ai Ten Voltage: 12 V DC Empty weight: 30.5 kg Fuse: 25 A plug fuse Tank capacity: 300 L Dimensions L x W x H: 997x654x703 mm Motor data: Delivery pressure: 1.6 bar Display: 4 digits, with 2 decimal places Pump type: Vane pump, self-priming Current consumption: 18 A

Condition: new, Chain protector 341, 400 ml, greenish spray can, OKS · Extremely good creep properties · Strong adhesion and resistant to being flung off · Very good wear protection · O-ring neutral · Solvent-free · For high-speed chains · Synthetic lubricant for machine components exposed to high pressures or corrosive environments · Other technical properties: Container: spray can Nwodpfxj Abw I No Ai Tsn Container: spray can Content: 400 ml

Condition: used, Jungheinrich charging station for material handling equipment Industrial charging station, maintenance stand for battery maintenance If you use electric material handling equipment in your operations, it relies on accumulators or batteries as its energy source. By installing a battery charging station, you benefit from a compact solution that significantly simplifies battery charging. The system serves as a charging station for material handling equipment (such as forklifts). It features a charging station with a Tecna spring-loaded cable reel to keep the charging cable in position. Construction: The yellow steel structure comprises a metal frame with an integrated impact guard at the base to protect the system from damage caused by vehicles. Nsdsy Nx E Rspfx Ai Town Spring-loaded cable reel for ergonomic handling of heavy cables. Jungheinrich battery charging station for floor mounting Year of manufacture: 2023 Without charger "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs on request!

Condition: new, Plastic wall-mounted distribution box, screwed connection M32, 2x CEE 16 A, 4x 230V · Robust and impact-resistant housing made of ABS plastic · Ensures trouble-free load on the sockets when plugs are pulled · The circuit breakers are installed under a transparent, impact-resistant Makrolon cover · All external metal parts and lid screws are rustproof · The sockets are made of impact-resistant polyamide 6 and have nickel-plated or brass contacts · Lockable · Input via screwed connection M32 on top (with blind screwed connection M32 on the bottom) · Splash-proof (IP54) · Approved for use indoors and outdoors, completely assembled and pre-wired · Other technical features: Protection: circuit breaker with RCD Output: 2 x CEE 16 A, 400 V, 4 sockets 230 V Protection: 1 x circuit breaker 16 A, 3-pole, C, 2 x circuit breaker 16 A, 1-pole, C, RCD 40 A, 400 V, 4-pole, 0.03 A across all outputs Nsdpfx Aio Ab Hm Uo Tewn

Condition: new, Tool cart 166C B725xT398xH1102mm, 300 kg, steel sheet, HAZET · Made of steel sheet · Powder-coated · Tabletop with replaceable beech wood panel Njdpfxo Ab Hahs Ai Tswn · Large solid rubber tires with double ball bearings · Both swivel casters can be locked in both longitudinal and transverse directions · Tabletop and 2 tool compartments can be easily lowered and locked · Swiveling columns · Intermediate boxes with adjustable settings · 3 all-round impact protection strips · Can be locked with a padlock · Total static load capacity: 300 kg Delivered with a padlock External width: 725 mm External height: 1002/647 mm External depth: 398 mm

Condition: new, Two-tier trolley, 2 loading surfaces, L605 x W405 mm, brilliant blue, load capacity 250 kg, with handle. Njdj Achrhspfx Ai Tjwn * For Euro containers, L600 x W400 mm * Steel tube and profile steel, welded * Powder-coated for durable surface protection, impact and scratch resistant * Loading surfaces with all-round steel edging Loading surface width: 405 mm Wheel diameter: 125 mm Tires: TPE Load capacity, upper loading surface: 100 kg Weight: 18 kg Design: with push handle Total load capacity: 250 kg Frame: steel tube Loading surface design: wood-based material panel Loading surface length: 605 mm Shelf height: 194/623 mm Surface: powder-coated Color: brilliant blue, RAL 5007 Number of loading surfaces: 2

Condition: new, Model T wire rope winch, load capacity 3200 daN, rope diameter 16.0 mm, with 20 m rope * Lightweight design * Universally applicable * Light and easy to handle * For pulling and tensioning * Housing made of high-strength steel sheet, impact-resistant * With overload protection * With lever tube * With 20 m rope * With pointed end and crimped hook on the hand crank spool = small basic equipment * Other technical specifications: Force required: 45 kg * Lever tube length retracted/extended: 650/1150 mm * Rope feed: 23 mm * Design: with rope * Subject to mandatory inspection: yes Load capacity: 3200 daN Njdpfx As Ab Nirsi Tjwn Rope feed: 23 mm Design: with rope Rope diameter: 16 mm Force required: 45 kg Winch width: 130 mm Total weight: 52.9 kg Winch height: 355 mm Rope length: 20 m Winch length: 840 mm Lever tube length retracted/extended: 650/1150 mm