Used Ims Hy 55 E for sale (73,970)

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible king pin load: 19,000 kg Permissible axle load: 36,000 kg Gross vehicle weight: 55,000 kg Unladen weight (per DIN): approx. 15,500 kg Lower deck length i.L.: approx. 6,650 mm + 4,000 mm Axle table length: 3,550 mm External width: 2,550 mm Loading edge/lower deck: approx. 200 mm – 350 mm Sliding table length: 500 mm Lower deck widening to: 3,050 mm Lower deck extendable by: 4,000 mm B-dimension: 13,300 mm Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish Oversize warning signs front and rear, with red/white panels Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single wheel suspension, hydraulic steering and hydraulic suspension Front high-bed: Side panels 600 mm high Corners at front of high-bed angled Exterior-access doors in front corners (left and right) Lockable storage box with lid behind the front wall; height 600 mm, width 2,480 mm, depth 7,500 mm Spare wheel on high-bed, right side behind partition wall Staircase on right side for access from lower deck to front high-bed Hydraulic coupling for uncoupling on left side (6-way multi-faster coupling) 6 external lashing points, 3,000 kg each (fold-down lashing eyes) on high-bed 2 lashing points, 5,000 kg each, on upper longitudinal beams (to the rear) Nsdpfx Ajyfu N Ajkujct Lower deck: Climbing aids at the boom – pull-out Outer frame thickness 8 mm Lower deck extendable by 4,000 mm, lockable every 500 mm With sliding table, lockable every 250 mm 28 external lashing points, 10,000 kg each, on the outer frame 24 plug-in sockets 90 x 90, evenly distributed for lower deck widening to 3,050 mm Between extension beams, 50 mm hardwood planks are placed, protruding by 10 mm Rear high-bed: Front of rear high-bed sloped and perforated to allow retrofitting of ramp mount profiles (galvanized adapters) At rear: ramp mount profiles (Altec) – C rails 8 external lashing points, 10,000 kg each, on rear high-bed 6 lashing points, 5,000 kg each, in the excavator recess 10 lashing points, 5,000 kg each, for oversize loads on the outer frame Excavator recess can be closed at front and rear with insertable wooden floor plates Electrics: Use NATO spiral cable; power supplied by tractor unit Roof beacon centered at rear LED side marker lights Standard vertically mounted taillight (LC5) Work lamp on the high-bed to illuminate the lower deck Oversize warning signs front and rear, with controls for uncoupling, safety sensor, and suspension pressure switch Air: Aluminum air reservoir 80 l TEBS modulator Slide-out lock left and right (valve located at rear high-bed sides) Double release valve Hydraulics: Hydraulic system on high-bed for steering, suspension, and detachable gooseneck Accessories: 2 x 4 pieces hardwood planks for lower deck widening and intermediate table 2 wheel chocks for uncoupling 4 wheel chocks On request, we can provide a leasing or financing offer. Mr. Ebert (phone...) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale.

Condition: used, Year of construction: 2021, operating hours: 998 h, Sennebogen 355 E, telehandler, year of manufacture: 2021, operating hours: only 998h!, incl. 2,500L grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140 hp/103 kW], all-wheel drive and all-wheel steering (4x4x4) – crab steering, lifting capacity: 5,500kg, lifting height: 8,450mm, automatic level control, elevating cab to 4,250mm, operating weight: 11,800kg, very good condition, immediately ready for use. Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ... ). We are happy to assist you. Further information is available on our website. Subject to prior sale and errors excepted. Nodsyfq Tdspfx Akuoct Rental possible = More information = Please contact Tobias Ebert for further details.

Condition: used, gearing type: automatic, lifting height: 8,450 mm, Year of construction: 2021, operating hours: 998 h, Sennebogen 355 E, telehandler, year of manufacture: 2021, operating hours: only 998h!, incl. 2,500 l grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140 hp/103 kW], all-wheel drive and all-wheel steering (4x4x4) – crab steering, lifting capacity: 5,500 kg, lifting height: 8,450 mm, self-levelling, lifting cab 4,250 mm, operating weight: 11,800 kg, very good condition, ready for immediate use. On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For more information, please visit our website. Subject to prior sale and errors. Cab, rental possible = More information = Engine brand: Diesel Lifting capacity: 5,500 kg Please contact Tobias Ebert for further information. Njdpeyfq Nrefx Akusct

Condition: used, axle configuration: 2 axles, first registration: 04/2019, color: other, Year of construction: 2019, Empty weight: 4.240 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Ncodpfow Ewa Esx Akust Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: used, axle configuration: 2 axles, first registration: 09/2020, color: other, Year of construction: 2020, Empty weight: 4.220 kg Axle 1: left 9 mm right 9 mm Ncjdpfewgwxkjx Akujt Axle 2: left 9 mm right 9 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: used, first registration: 11/2010, color: other, Year of construction: 2010, GOODYEAR TIRES IN GOOD CONDITION FOR MEGA OR LOWLOADER. Ncodpexvx Ipjfx Akuet

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual Njdpfex E Utiex Akusct The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.

Condition: new, functionality: fully functional, machine/vehicle number: 12312572, empty load weight: 690 kg, maximum load weight: 1,310 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, loading space height: 300 mm, suspension: other, Year of construction: 2026, Loading dimensions approx. 1550 mm x 3050 mm External dimensions approx. 1670 mm x 4410 mm Permissible total weight: 2000 kg Payload: approx. 1340 kg (payload may vary depending on additional equipment) Manufacturer: Debon Features - Rear tipper "PW1.2 LUX" - Electric hydraulic pump (battery powered) Ncodpfx Aei R Hwmjkuot - Charging contacts integrated in the frame profile (12V / suitable for chargers) - 6 lashing eyes on the loading floor - H-frame (installed / removable) - 300 mm aluminium side wall extension (foldable / removable) - 300 mm aluminium side walls (foldable / removable) - Vehicle documents included Additional equipment - Base plate: galvanized steel sheet on phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar completely hot-dip galvanized | Rubber suspension axle | V-drawbar with ball-type coupling | Automatic heavy-duty jockey wheel Electrics - 12 Volt | 13-pin plug | Fog lamp | Clearance lights If you wish to purchase this trailer or have further questions about trailers, please use our internal tipper trailer number "12312572".

Condition: new, functionality: fully functional, machine/vehicle number: 12311666, empty load weight: 530 kg, maximum load weight: 1,470 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, suspension: other, Year of construction: 2026, Product information "Debon rear tipper DK 155x305cm 2.0t|E-pump|Promotion" Tipper with e-pump The DK tipper trailer is an extremely practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and the rear tipper can be positioned particularly flexibly for unloading. The folding side walls are 30 centimetres high. With an unladen weight of 530 kilograms, the tipper trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is specially raised. The wooden floor plate of this reverse tipper is covered with a steel plate. The floor frame profile is equipped with six lashing brackets. Convenience is a top priority The loading area can be tilted backwards using an electric pump. An overrun brake prevents the towing vehicle from being pushed by the load when stopping or on slopes. All load-bearing steel frame parts are hot-dip galvanized. If required, a 60 centimeter high lattice extension can be supplied as an option. Special features Double-walled anodized aluminium side walls Rear tipper with electric pump + battery Heavy-duty jockey wheel Further equipment Removable drop sides, folding Stable screen-printed floor / sheet steel floor on the floor plate Axle and drawbar completely hot-dip galvanized 6 tie-down points in the floor 12 volt electrics, 13-pin plug with reversing light Ncjdji R Hvhjpfx Akuet Frame welded and completely hot-dip galvanized. Other documents Vehicle registration certificate part 2 / Accessories available at extra cost - see below - If you would like to buy this trailer or have further trailer queries, please use our internal tipper trailer "No. 1666".

Condition: used, Beams for wide-span racking Nedpfx Aksyinuyjusct Manufacturer: Mecalux Model: ZE-55 Length: 1900 mm Stock: 60 units Matching shelves are also available.

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,700 h, load capacity: 3,000 kg, lifting height: 4,980 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, Load capacity 3,000 kg Linde E 30 Njdpfex Rhzwsx Akujct Mast type: Triplex with full free lift Year of manufacture: 2018 Operating hours: 4,700 Lifting height approx. 4,980 mm Overall height approx. 2,250 mm 3rd + 4th valve, double auxiliary hydraulics Sideshift Gross €20,825 Net €17,500 Available in calendar week 2 / 2026 Looking for another forklift or high-lift truck? LPG, electric, or diesel? Write to us and we'll find the right vehicle for you. Subject to errors and prior sale. Sale to business customers only, without warranty.

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear: Spur gear with straight teeth -Gear: Diameter Ø 113 mm / 43 teeth -Tooth width: 25 mm -Shaft mount: inner Ø 32 mm -Bolt circle: Ø 70 x 12 mm -Dimensions: see photo technical drawing -Number: 3x gear shaft available -Price: per piece Njdpfx Ajxf An Ejkuect -Dimensions total: Ø 113 x 25 mm -Weight: 1.4 kg/piece

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply, servo amplifier -Manufacturer: Hauser, servo controller servo amplifier 2 pieces with rack -Type: HBV 750 SEO HBMR 55 A4-445 -Price/charge: complete -Total dimensions: 390/250/H310 mm -Weight: 8.4 kg Ncedpjn Nbmtofx Akuet

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Ncsdoiqhhvspfx Akujt -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 44-55 mm -Grinding wheel: Ø 270 mm, see photos -Shipping/Price: complete -Dimensions each: Ø 270 x 80 mm -Weight: 9.7 kg/piece Ncsdpfxew Dphlj Akuet

Condition: used, Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1080mm Nedetvb D Hspfx Akuoct -Cross section: 150 x 55 mm -Hole: Ø 50 mm, see photos -Dimensions each: 1180/150/H875 mm -Total weight: 120 kg

Condition: good (used), Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chucks, four-jaw lathe chucks, 4-jaw chucks, faceplate, faceplate chucks, facing lathe chucks, clamping device for dividing head -Clamping jaws: 4 pieces for four-jaw chuck, faceplate chuck, dividing head -Clamping width: 55 mm -Dimensions: see photo -Shipping/Price: complete -Dimensions: 200/60/H140 mm -Weight: 3.4 kg/piece Ncjdpfx Aov U R Ehskujt

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Nsdpfx Aew Dnv Uokuoct -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: Dorfnerwerk Type 5A 120-JOT8-UEH 400 x 20 mm -Transport dimensions: Ø 430 x 80 mm -Weight: 26.4 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm Nsdpfoiqhhrsx Akuect -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM Ncsdjitv Dfopfx Akust -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm Ncedew Dnx Nopfx Akujt -Weight: 31.1 kg

Year of construction: 1995, condition: good (used), strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Waldys, drive unit for stretch wrapping machine model 55 -Motor: 4 kW / 80 - 16 rpm -Individual components: see photos Nodeu Huubepfx Akujct -Dimensions: 640/570/H680 mm -Weight: 120 kg

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve Ncjdpfx Asfyh Dtjkust -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

Condition: used, Stick electrodes 5.0 x 450 Nsdpfx Akjd Emhheusct -Type: Supercito E51 55 B 10 -Price: per package -Number: 13 packages available -Weight per package: 5.5 kg

Condition: used, Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 55 mm shaft Ncedpfocgdtgjx Akuot -made of: gunmetal -Number: 50x stock available -Price: per piece -Dimensions: 90/68/H85 mm -Weight: 2.1 kg/piece