Used Kapelou Last Mile Miniload Solution for sale (6,862)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Nodpfx Aeyx Dwkjkuswg Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total width: 6,000 mm, total height: 6,000 mm, total length: 1,000 mm, inner dimension width: 6,000 mm, inner dimension length: 8,000 mm, inner dimension height: 3,200 mm, Equipment: cabin, compressor, documentation/manual, lighting, I would like to present an offer for the sale of a complete Blastman shot blasting robot, model B20CX, equipped with a full abrasive recovery system, filtration, pressure vessels, and controls. The cleaning robot is in practically new condition. The system is designed for automatic and manual shot blasting of steel structures, castings, large-scale components, and parts requiring high repeatability and cleaning efficiency. Nwjdpox Rzlcefx Akujg Key technical information: • Robot model: Blastman B20CX • Year of last modernization: 2024 • Robot working area: 8 × 6 × 3 m (possibility to extend the working space if needed) • Robot arm: 2750 mm (telescopic) • Operating modes: automatic / manual • Medium: steel shot • Performance: up to 200 m²/h • Technical condition: as new, minimal signs of use Scope of offer: - Complete Blastman B20CX shot blasting robot with abrasive material recovery system

Condition: as good as new (ex-display), Year of construction: 2022, CNC lathe Doosan Puma GT2100M, year 2022/10. Condition: new machine, showroom unit. Equipped with a Cromar chip conveyor. Nwedpfx Asy Azraokueg

Year of construction: 2011, condition: used, For sale are three used vertical centrifugal free flow pump from Emile Egger Pumpe & Co. AG from the year 2011. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Number: T 214050 and T 214050 Year of construction: 2011 L/s: 2,77 1/min: 1800 Nodsga Drqepfx Akujwg m: 14,7 Connections: DN50 and DN65 length: 192cm Quantity: 3 Motor data: Manufacturer: VEM motors GmbH Year of manufacture: 07/2011 Type: IEC/EN 60034-1 Number: 186889/0003, 186889/0001H and 186889/0002H kW: 5,5 HP: 7,5 V: 400 A: 10 1/min: 1470

Condition: new, Year of construction: 2025, DN SOLUTIONS PUMA GT3100L (12/2025) – Long Bed Model: PUMA GT3100L Year: 12 / 2025 Steady rest Chuck Size: 12 inch Max Turning Diameter: ~ Ø480 mm Max Turning Length: ~ 2,000 mm (long bed) Spindle Bore: 102 mm Spindle Speed: 3,000 rpm Main Motor Power: 26 kW Nodpfxoy Hfh Hj Akuewg Max Torque: ~ 735 Nm X Axis Rapid Traverse: 24 m/min Z Axis Rapid Traverse: 24 m/min Guideway Type: Box guideways Control Unit: Fanuc i Plus Turret: 12 station

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal glass convection tempering furnace . For max. glass sizes : 1500 x 3000 mm Glass thikness : 4 - 19 mm Voltage : 400 V 50 Hz Control voltage : 230 V V AC 24 Power : Heating : 296 Kw Motors : 262 Kw Nwedpfxjyw Hgrs Akujg Total : 558 Kw Current : Heating : 470 A Motors : 450 A Total : 920 A

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 S PVC KALIPSIZ MODEL (MOLDLESS) CAM ÇITASI KESME MAKİNASI, • Complies with CE standards. • 45-degree cutting of PVC beading profiles performed with 4 saws. • Adjustable for 12 different beading cut types. • Ability to cut 2 beadings simultaneously. • 2.5-meter right/left conveyor system for long beadings. • Beading claw adjustment mechanism. Nwsdpjq U Tbrofx Akuog • Pneumatic clamping system. • Optionally equipped with diamond-tipped saw for aluminum beading cutting (with cooling system). • Air gun. • Adjustable cutting speed. • Compatible with digital meter connection. • Operable with Bluetooth measuring station.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 PVC CAM Çıtası KESME MAKİNESİ, • Conforms to CE standards. • 45-degree cutting capability for PVC glazing bead profiles. • Automatic operating system. • 2.5-meter conveyor system for long frames. • Adjustable cutting speed. • Pneumatic profile clamping system. Nsdpeq U Tbksfx Akuowg • Saw blade diameter Ø200 millimeters. OPTIONS • Left conveyor attachment capability. • Notching saw. • Connectivity for digital meter. • Capability to connect a Bluetooth measuring station.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 510740, total width: 5,900 mm, total length: 3,760 mm, overall weight: 4,000 kg, input current: 33 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Glaston Bavelloni 370 S Lamy table Serial Number: 510740and wir diagr nr: 9500750300 Voltage:400v -Power 43.2kw - lcc max: 10ka -50Hz - IA: 33A Nodeu D Namjpfx Akujwg Weight +/- 4000kg Glasthickness 3/3 till 10/10

Condition: good (used), functionality: fully functional, Vertical bag packing, filling and sealing machine Brand Jasa Packaging Solutions B.V. Model PMT Horizontal seal length 270 mm Material width 620 mm Nwsdjv Utd Hepfx Akuog Overall dimensions: 2800 mm x 1450 mm x 2350 mm.

Condition: new, functionality: fully functional, Plastic Modular Belt supplier Njdpfjypcd Nex Akuowg

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, total length: 13,000 mm, total width: 5,650 mm, total height: 3,300 mm, input current: 10 A, input frequency: 50 Hz, Industrial Spiral Bread Cooler An industrial spiral bread cooler is available, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. Nwjdpfoy Au Insx Akujg The spiral has a total length of approximately 420 meters and ensures uniform cooling of the products. The dwell time for a complete cycle is approximately 94 minutes, enabling an efficient cooling process after baking. The system has a throughput of around 2,500 loaves per hour and can simultaneously accommodate up to 4,000 loaves with a total weight of approximately 2,566 kg. The design allows for configuration as a single or dual spiral (figure-eight type), depending on production requirements. It is suitable for integration into existing bread and bakery product lines. Main specifications: - Outer diameter: approx. 5.65 m (per loop) - Height: approx. 3.30 m - Required floor space: approx. 12–13 m in length (depending on configuration) - Power supply: 400V AC / 24V DC - Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold dismantled. All components are available. It was fully operational until dismantling and is in good technical condition. On-site inspection is possible by appointment. Additional information can be provided upon request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1, overall weight: 34 kg, maximum load weight: 400 kg, color: grey, For sale: used plastic BIG BOXES /CAPP plastic in good condition actual photos available dimensions: 1200x1000x625 mm, capacity: 520 liters empty weight: 34 kg Nwjdpfx Akevza N Nsujg 4 legs currently 200 units available for sale EXW Nové Mesto nad Váhom, Slovakia Note: optional lids available for purchase at €15 each

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. Nsdpoyt Nm Ejfx Akujwg The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. Nwjdsyt Nhvjpfx Akueg You can view this machine in our showroom in Bergeijk.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Nedpfjyvfvuox Akuswg Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, PLAN 10-4c heavy-duty trailer / transport trailer Payload: 25t - 25,000kg Nodpfx Aexmuz Hokuswg Unladen weight approx. 2,240kg Turntable steering with oscillating axles, year of manufacture 2010 Loading area dimensions: 500x200cm, loading height 76cm Very good condition, see photos Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping by freight forwarder possible, please inquire with postcode

Condition: used, total length: 19,700 mm, total height: 4,950 mm, shelf height: 4,950 mm, Included in this package: 8 x uprights at 4,950 mm x 1,100 mm (grey) 42 x beams at 2,700 mm (orange) 112 x locking pins Results in a rack row with 7 bays, each with 3 levels plus ground storage = a total of 84 pallet spaces (550 kg per pallet) Additional uprights and beams for this system are available. Please contact us for more information. Manufacturer: Tixit Condition: used, very good condition Height: 4,950 mm Length: approx. 19.70 linear metres Nsdpfx Asytp Amokujwg Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 1,650 kg Bay load: 4,950 kg Pallet spaces: 84 Accessories such as: - Floor anchors - Connectors - Load warning signs - Collision protection guards - Safety barriers - Mesh shelves - Rear mesh panels - Deep support bars - Separation railings and much more... Just ask us for details! Terms & Conditions of Sale & Delivery (B2B) - Pricing & Logistics: All prices are net ex works. Express delivery via our own fleet can be arranged on request. - Offer validity: All offers are subject to change. Intermediate sale expressly reserved. - Retention of title: The goods remain our unrestricted property until full payment has been received (no disposal or processing permitted). - Warranty: Sales exclusively to commercial customers (§ 14 German Civil Code). For used and 2nd-choice goods, any warranty for material defects is excluded. Manufacturer warranty applies for new items.

Condition: excellent (used), functionality: fully functional, Zum Verkauf steht ein robustes, schweres Anbau-/Aufnahmegerät in orangener Lackierung. Das Teil ist aus massivem Stahl gefertigt und für hohe Belastungen ausgelegt. Njdpexcpv Djfx Akuewg Technische Daten: • Tragfähigkeit: 12,5 Tonnen (siehe Typenschild) • Stabile, verschweißte Konstruktion • Zwei massive Bolzenaufnahmen • Hakenaufnahme für schnelles Ein- und Aushängen • Farbe: Orange (gebraucht, mit Gebrauchsspuren) Zustand: Gebraucht, funktionsfähig, mit den üblichen Gebrauchsspuren und Lackabplatzungen. Ideal für den Einsatz im Schwerlastbereich, Bau, Industrie oder für Bagger-/Kranaufnahmen. Besichtigung nach Absprache möglich. Abholung bevorzugt, Versand nur nach Rücksprache wegen Gewicht und Größe.

Year of construction: 2024, condition: new, functionality: fully functional, We are a manufacturer of complete technological lines for washing and granulating plastics. We also offer individual devices such as centrifuges, washers, screw presses, and flotation tanks. Nodpfxouqu Uhs Akuswg A high-performance plastic washing and granulation line, engineered for processing a wide range of materials including PE, PP, HDPE, LDPE, LLDPE, PS, and ABS. This comprehensive recycling solution efficiently manages cleaning, drying, and granulation processes, ensuring the production of high-quality recycled material. Each line is custom-designed to meet the specific requirements of our clients, with throughput capacities ranging from 300 kg/h up to 2,500 kg/h, providing the ideal solution for operations of any size. The system is built for long-term durability and user-friendly operation, making it suitable for both small and large-scale recycling plants. Advanced technologies maximize productivity, reduce energy consumption, and ensure consistent results, delivering a reliable and cost-effective solution to enhance plastic recycling efficiency. Please contact us for inquiries and quotations. Erfor.pl

Year of construction: 2025, condition: new, functionality: fully functional, DYNAMIC WASHER Model ERFOR® DR8 Component machine for recycling washing lines ♻️ ♻️ ♻️ Dynamic washers are machines designed for cleaning moderately contaminated and fragmented plastic waste, such as: PP packaging, PVC, PET bottles, shredded big bag materials like LLDPE, LDPE, HDPE, PP, PVC, PS, household chemical waste, and many others. The washers offered by Koltex PRS are easy to operate and reliable machines, which can be configured into a highly efficient dynamic cascade washing system (tandem – 2 x 30 kW, 2 x 55 kW, or 2 x 75 kW). Multi-point water dosing to the screen washers (cleaning system) and active contamination extraction ensure more effective operation, while dynamic feed movement is enabled by rotating impeller blades. The extended screen section (1400 mm) significantly enhances washing quality, and drainage of excess water is ensured by an acid-resistant steel screen. The use of two screen segments improves the ease of maintenance. Model – DR8 Motor power [kW] – 30 / 55 / 75 kW Film drying capacity [kg/h] – 1000 / 1500 / 2000 kg/h Milling drying capacity [kg/h] – 4500 Our portfolio also includes: Nwsdpfsuqlmzjx Akuog - Complete plastic recycling systems - DWFS® washing lines - Granulation and extrusion lines For more information, please visit our website.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. Njdox Uz Iljpfx Akuowg F800 – All-round finishing machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: used, machine/vehicle number: 5772, Rotor diameter: 300 mm Rotor width: 500 mm 3 x 2-knife rotor 2 rows of stator knives Nodpfx Ajyr Tp Iokuswg Infeed cross section approx. 300 x 500 mm Drive motor: 37 kW Machine with roller infeed

Condition: new, Year of construction: 2025, functionality: fully functional, 120cm Endless UV LED Digital Scan Camera CCD Visual AI Printer Scan and print at the same time - no more stencils - any application - different images at the same time - enormous speed advantage Material width: 1200mm ENDLESS LENGTH due to conveyor belt Material height: 150mm (higher passage possible on request) Recommendation 3x Ricoh Gen5 for CMYK + white ( indicated price ) 4x Ricoh Gen5 for CMYK + white + varnish ( surcharge approx. 3500 Euro ) Including vacuum table Inclusive conveyor belt Including operator computer Nwodpfxet E Dk Uo Akusg Including CCD Visual AI camera system Depending on the number of heads 12 - 40sqm/h or more With 2 heads approx. 12sqm per hour possible Machine dimensions: 2060mm x 2700mm x 1300mm Weight: approx. 500kg + pallet Machine power: 4500W

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer digital flatbed printer - replaces the common laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials New model: UV4060 Print head: Epson TX800 2690 dpi max. Including software for printer and image processing Dimensions: 800*858*566mm weight: 70kg 360 degree use possible on request: for bottles and round objects A3 size 31x55cm and 23cm height possible 5x500ml paint can be supplied (extra charge) Nwodpfx Akjd Ewzieueg Software setting and printer explanation gladly if required. Germany/Europe-wide. (Surcharge) Print videos etc. can be sent by Mail/WhatsApp.