Used Komatsu Pc17R-5 for sale (60,343)

Condition: excellent (used), mileage: 370,137 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, first registration: 07/2014, emission class: euro5, color: white, Year of construction: 2014, Despite our care in entering the data correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual vehicle. Ibodpez I Duvofx Akroc TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further Information = Front axle: Steered Engine displacement: 2,299 cc Technical condition: very good Optical condition: very good Please contact Thierry Leemans for more information.

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Ibedpfx Aez N Np Aokrjc

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Iodpfx Asz N Nrdokrobc Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Ibodpfxsz N Nrko Akrec Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, mileage: 260,000 km, power: 375 kW (509.86 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, airbag, cruise control, navigation system, parking heater, power assisted steering, soot filter, D6G automatic climate control, NAV navigation system, A1H hydraulic auxiliary drive (HAD), B1Z ABS, switchable, B2A disc brakes on front and rear axles, B3H secondary water retarder, D1C driver's comfort suspension seat, D3B comfort lower bunk, D6M hot water auxiliary heater for cab, E2J circuit breaker, F1D L cab ClassicSpace, 2.30 m, tunnel 170 mm, F3B cab suspension, comfort, steel sprung, F6R air horns on cab roof, MAN001 light sensor, JF1 rain sensor, G0T Predictive Powertrain Control, J2K speakers, 2-way system, J3Z axle load measuring device, M5V high-performance engine brake, N6Z transmission oil cooler, Q4K fifth wheel coupling height, H = 185 mm, Q5Q standard fifth wheel coupling, Jost JSK 37C, R2K aluminum rims 9.00 x 22.5, Speedline, S1D Stability Control Assist (ESP), S1H lane keeping assist, S1I distance keeping assist, S1L driver attention assist, 513 traffic sign assist, 268 brake assist, S1R side guard assist, S3A airbag, driver, S5Z cruise control. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Furthermore:!! Leasing/financing and trade-in possible!! !! !! - Errors and prior sales excepted!! Ibsdpfxoz N S Nxo Akroc - All information without guarantee.

Condition: used, Year of construction: 2024, Front frame with damping, housing BP-350/351 WS, right-hand version, housing BP-350/351 WS, left-hand version, sliding hexagonal plate, stone guard, tire size 13.0/55-16, long packer arm, lighting. Iedpfx Aoz Sddzokrsbc

Condition: new, Year of construction: 2025, Cartridge filter housing – 5 × 30″ – SUS304 Cartridges 5 Cartridge length (inch) 30 Iodpsz Sdr Esfx Akrebc Material SUS304 The inch value refers to cartridge length, not overall housing height. Connections, seals, operating pressure and temperature must be confirmed for the selected version. Image [1] [1]

Condition: new, Year of construction: 2023, 5-furrow plough, strip-type coulter, disc harrow, combination wheel 13.0/55-16, lighting + warning signs, hydraulic adjustment of working width. Ibsdpfx Asz Sdh Hekrjc

Condition: used, mileage: 33,982 km, power: 129 kW (175.39 HP), color: white, gearing type: mechanical, total length: 58,800 mm, total width: 20,500 mm, total height: 22,500 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, power assisted steering, For vehicle inquiries, Mr. Seidel will be happy to assist you (call him at [phone number]). Mitsubishi Fuso Canter 7C18 4x2 City Tipper Body: Unsinn SH-5/3700, lifting capacity: 5,000 kg, electric windows, air conditioning, rear-view camera system, central locking, number of seats: 3, touchscreen, Bluetooth, USB, radio, hands-free system, manual transmission, start/stop system, brake assist, engine brake, lane keeping assist, ABS/ESP/ASR, heated exterior mirrors, auxiliary drive, headlights: LED, fog lights, auxiliary headlights: vehicle rear, rear right, trailer coupling: ball-type hitch, tire tread: 1st axle 6-8 mm, 2nd axle 9-11 mm, permissible total weight: 7,490 kg, unladen weight: 3,730 kg, payload: 3,760 kg. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. [phone number]) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! ESP, particulate filter Isdpfsz Si Tzsx Akrebc = More information = Engine displacement: 2,998 cc GVWR: 7,490 kg Last inspection: 2027-08 Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 1982, With the step sorter, the largest sizes are sorted first. This has the advantage that the large sizes are less influenced by the sorting machine Sieve sizes: exit 1: 2x 100x52cm exit 2: 2x 100x52cmexit 3: 2x 61x52cm exit 4: 2x 61x52cmMultiple flower bulb sieves:52 x 100 cm sieves:2x 2 cm3x 2.5 cm2x 3 cm (1 sieve is a sieve with bars)4x 3.25 cm8x 3.5 cm7x 3.75 cm7x 4 cm5x 4.25 cm4x 4.5 cm5x 4.75 cm52 x 61 cm sieves:2x 0.75 cm2x 1.25 cm2x 1.75 cm2x 2 cm4x 2.25 cm2x 2.5 cm8x 3 cm3x 3.25 cmTwo shock systems: Ensures accurate sorting of different products (2 cams recently replaced) Iodpfsz Rf Ansx Akrjbc Versatile use: Suitable for flower bulbs, Brussels sprouts, mushrooms, seed potatoes, onions and more – with the correct sieves Conveyor belt outlets: Gentle transfer of sorted product More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2005, Kronen GS 10 belt cutting machine for slicing5 knivesJuliene 2x2mmJuliene 3x3mm (incomplete messing back knive)Wave cutting disc 4mm2 wing knive freely adjustable 1-50mm5 blade cutting knive 2.8mmparsley aprox 120kg/h, cabbage approx 800 kg/h, cucumber approx 800-1000kg/hFor more info about capacity of knives and which products it can cut. Please find a tabel from Kronen under the picturer at "documenten"in advertisement with tabel from Kronen. Extra knives can be purchased through Kronenincluding trolley The GS 10 is a belt-cutting machine for slicing, grating, rasping and dicing The multifunctional belt slicer allows users to cut virtually all kinds of food: salad leaves, vegetables, fruit, herbs, meat, cooked meat, fish, vegan substitutes, baked goods, cheese and nuts. This makes it ideal for an extremely wide range of applications and sectors. Depending on the product and cutting type, the GS 10-2 processes up to 1,500 kg of product per hour. Prior to processing, the right knife for the product is installed; no tools are required for this purpose. Thecutting thickness is infinitely adjustable from 0.5 to 50 mm. The hold-down pressure and the knife and belt speed are then set. The product is prepared forcutting, e.g. cored, peeled or segmented, before being placed on the 125 mm-wide infeed belt depending on the cut intended. Next, it is cut precisely and gently thanks to precise hold-down technology and product guidance. As standard, the cut product can be ejected underneath the knife box, for example into a spin basket or a Euro crate. It can be optionally conveyed via a discharge belt forfurther processing, for example when the GS 10 is integrated into a processing line. Ibedsz Rf Dfjpfx Akrec Cutting lettuce, e.g. iceberg lettuce, into strips or shredsCutting lollo rosso lettuce into piecesCutting cabbage into strips or shredsGrating carrots or cutting them into sticks orslicesDicing potatoesDicing pineapple and mangoCutting cooked chicken breast into slicesCutting cabanossi or bockwurst sausage intoslicesCutting cooked meat into strips or pulling itapart to make "pulled beef"Cutting, dicing or shredding fish, for examplesalmonCutting or shredding vegan meat substituteGrating hard cheeseCutting or dicing bread rolls or baguetteGrating nuts More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Thermotron Type: Thermotron SE-1000-5-5 Water-cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working area volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70°C to 180°C Temperature control tolerance: 0.3°C Overall dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 32.4 A Refrigerant: R-404A / R23 Approximate weight: 862 kg For your safety as a buyer, please note the following information: Iodpfxozd R S Ns Akrsbc The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VCS³ 7034-5 Vötsch Climate Testing Chamber, Water-Cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side opening: 50 mm Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 9 kW, Rated current: 20 A Fuse, on customer's side: 63 A slow-blow Refrigerant: R404A/R-23 Weight: approx. 570 kg Isdeziyx Nepfx Akrsbc For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WK111-600   Weiss Climate Testing Chamber, Air-Cooled   Performance data for temperature tests:   Temperature range: -5°C – +90°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Ibsdpfx Akeziyxceroc Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min   Performance data for climate tests   Temperature range: +10 to +90°C Humidity range: 10 to 98 % RH Temperature fluctuation over time: ± 0.1 to ± 0.3 Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Humidity fluctuation over time: ± 1 to ± 3   Test chamber dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left 1 feedthrough ∅ 125 mm, installed on the right   Power supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 KW Rated current: 10.0 A Refrigerant: R 404 A 600 liters Weight: 540 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have on the phone.

Condition: used, Weiss Temperature test chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, operating hours 6126 h. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. The device is used to simulate temperature conditions and is ideal for: Material tests Electronics tests Environmental and aging tests Quality and endurance tests The chamber can generate very low temperatures up to approx. -70 °C as well as high temperatures up to +180 °C and change these at a defined rate (temperature ramps). Precise control allows reproducible test conditions to be achieved. Operation is conveniently carried out via an integrated touch panel. Special features: Fast temperature changes (up to 5 K/min) Uniform temperature distribution in the test chamber Water-cooled system Industrial standard – robust design Maintenance indicator and operating hour counter available Technical data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Temperature gradient: ≤ 2.0 K Ibsdpfoyxm Ulsx Akrec This makes the chamber ideal for demanding testing processes with high repeatability Test chamber: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side opening 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT-1000/70/5   Weiss temperature testing chamber, water-cooled With a temperature change rate of 5 K/min   Data for temperature tests: Temperature range: -70 °C to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K   Temperature change rate: Heating: 6.1 K/min Cooling: 6 K/min   Permissible test specimen weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg   Dimensions: Test chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm   Test chamber volume: 990 liters   Data for operation: Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Nominal current: 38 A Nominal power: 26 kW Refrigerant: R404 / R23 Weight: approx. 955 kg   Information for buyers: To ensure the safety of our customers, the following work will be carried out on the offered climate chambers in advance:   1. Functional check and replacement of necessary components Ibodsy D Nyujpfx Akrjc 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. Ibjdpfx Akjzdy Iasrec The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, mileage: 62,785 km, power: 132 kW (179.47 HP), first registration: 11/2021, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Renault Master 180 HP Euro 6 Interhorse 5-seater, for stallions 1-2 horse transporter 1st owner Vehicle: * 170 HP Renault Master chassis, Euro 6, leather interior * Air conditioning * 5 seats * Radio-CD-navigation * Bluetooth hands-free system * Tow hitch * Cruise control * Multifunction steering wheel Horse compartment: * Soft rubber flooring * Partition, separate doors in front of each horse * Partition fully adjustable, e.g. for mare + foal * Roof fan * Roof hatch * LED day/night light * Closed storage boxes in the alcove * Saddle and bridle holder * Saddle room with storage compartments Errors/typos and prior sale are subject to change. More pictures available upon request. * EXPORT NET PRICE POSSIBLE Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Ibjdpfxoz S Sq Ie Akrjc Hamburgerstrasse 65 23816 Leezen Sales and service for all brands in the field of horse transporters and trailers. Please make an appointment in advance with Richard Theurer or Andreas Theurer.

Condition: good (used), Javo pot holders 5 cm inner diameter holder Number available:18 piecesInner size of pot holder: 5 cm Height from bottom plate to upper rim of holder: 5 cm Suitable for Javo Standard and Javo Super More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Iedsz Rac Aspfx Akrebc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: new, Year of construction: 2026, operating hours: 1 h, empty load weight: 810 kg, Solis 16 mini tractor / compact tractor – NEW! 5-YEAR WARRANTY / FREE DELIVERY THROUGHOUT THE NETHERLANDS / BELGIUM 3-cylinder, 16 hp diesel engine, year of manufacture 2026 / NEW, 4WD, 810 kg operating weight, high and low gear ratios, 17 km/h, three-point linkage with 500 kg lifting capacity, foldable roll bar, complete road lighting / work light at the rear, 1 x double-acting hydraulic valve, front / rear tow hitch, including COC documents for Belgium. Dutch registration €175, - excluding VAT, additional cost. Trade-in possible. €6,950, - excluding VAT for agricultural tires (€8,409.50, - including VAT). €7,650, - excluding VAT for lawn tires (€9,256.50, - including VAT). LEASING is possible for businesses in the Netherlands and Belgium. Interested? Send your company name, address, and Chamber of Commerce number (for Belgium, your VAT number) via email / app, and you will receive a quote / acceptance as soon as possible. 60 months €140 per month 72 months €120 per month Ibsdpoz N Tqwsfx Akrsc 84 months €105 per month

Condition: good (used), Year of construction: 2016, Regero R2010 automatic belt planting machineElectric remote adjustmentWith grippers like Ferrari fastblock5 rowsWidth cage roll 140 cmPlanting distance 30 cmCenter-to-center distance of outer rows 120 cmOnly when a row is removed, the row spacing can be changed to approx. minimum 23 cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Ibjdpfx Asz Rchnokroc The specialist in used agriculture and horticulture machinery

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 42,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, navigation system, onboard computer, - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Speed limiter - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Sun visor EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. Mercedes-Benz Arocs, Model Generation 5 3540, 8x4 EURO 6e Ijdpfx Aksypalqorobc EuromixMTP EM 9 L NEW - without registration Vehicle equipment: Engine OM470, R6, 10.7 l, 290 kW (394 hp), 1900 Nm Euro6e Transmission G 230-12/ 11.7-0.78, offroad PowerShift 3 automatic transmission Front axle 7.5 t, rear axle planetary gear, 233, 13.4 t Tires, front axle: 315/80 R 22.5, rear axle: 315/80 R 22.5 Wheelbase 4250 mm (frame overhang 1000 mm) Cab: M-Cab Classic Space Disc brakes on front and rear axles Tank: 320 l, left side, 735 x 700 x 750 mm, aluminum - AdBlue tank: 25 l Cab rear wall with window - tinted windshield Light sensor - daytime running lights Roof hatch/ventilation flap External sun visor, transparent Multi-function steering wheel Multimedia cockpit Air conditioning Cruise control Vehicle class N3G, off-road vehicle Comfort central locking system EuromixMTP - EM 9 L concrete mixer body Model: EM 9 L Nominal volume: 9 m³ ready-mix concrete Mixing drum in lightweight construction Mixing drum in lightweight design made of HARDOX S450 material Mixing blades in lightweight design made of HARDOX S500 material Gearbox: ZF-P5300 Hydraulic pump: Bosch Rexroth Hydraulic motor: Bosch Rexroth Oil cooler: integrated, ASA Mixing control: mechanical, start/stop electrical Compressed air water system Water connection at the platform with hose line Water filling line, single-sided with C-coupling Mixing drum with one service hatch Access ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in the filling hopper, discharge trough, and swiveling chute Drum locking to secure the drum during maintenance Polyurethane primer Weight approx. 3,425 kg, deviations +/- 5% with emergency stop function according to EU safety standards Fenders made of aluminum above the rear axles 2x extension gutters made of steel or plastic Water system Water tank 500 l (compressed air) Water tank, steel Shut-off valve mounted below the water tank in the filling line Water connection “C” coupling Your advantages: • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts: • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH,...

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, air conditioning, central locking, differential lock, electric window regulation, onboard computer, - Heated mirrors - Leaf spring suspension - Differential lock - Air conditioning - PTO - Rearview camera EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. Mercedes-Benz Arocs Model Generation 5 3743, 8x4 EURO 6e EuromixMTP EM 10m³ L NEW - without registration Vehicle equipment: Engine OM470, R6, 10.7 l, 316 kW (429 hp), 1900 Nm Euro6e Transmission G 230-12/11.7-0.78, off-road power shift 3 automatic transmission Front axle 9 t, rear axle bevel gear 233, planetary gear, 13.4 t Tires, front axle: 385/80 R 22.5, rear axle: 315/80 R 22.5 Wheelbase 4250 mm (frame overhang 1000 mm) Cab M-cab Classic Space Disc brakes, on front and rear axles Tank 320 l, left, 735 x 700 x 750 mm, aluminum - AdBlue tank 25 l Cab rear wall with window - windshield tinted Light sensor - daytime running lights Roof hatch/ventilation flap on the roof Exterior sun visor, transparent Multi-function steering wheel Multimedia cockpit Air conditioning Cruise control Vehicle class N3G, off-road vehicle Comfort central locking system Concrete mixer equipment: EuromixMTP - concrete mixer body EM 10 L - lightweight design Model: EM 10 L Nominal volume 10m³ ready-mix concrete Mixing drum in lightweight design Mixing drum in lightweight construction made of HARDOX S450 material Mixing blades in lightweight construction made of HARDOX S500 material Gearbox manufacturer ZF-P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooler system integrated Mixing control mechanical and start/stop electrical Compressed air water system Water connection on the platform with hose Water filling line, one-sided with C-coupling Mixing drum with one service flap Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swiveling chute Drum lock to secure the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% Iedpfx Akeyn Nqmsrobc With emergency stop function according to EU safety standards Mudguards made of steel over the rear axles 2x extension gutters made of steel or plastic Water system Water tank 500l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Your advantages: • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contacts: • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica | ...

Condition: new, mileage: 1,450 km, power: 382 kW (519.37 HP), first registration: 01/2026, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electronic stability program (ESP), navigation system, onboard computer, traction control, - Leaf spring suspension - Brake booster - Differential lock - Air-suspended seats - Radio/CD - Sun visor EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. MAN TGS 26.520 BB 6x4 EURO 6e EuromixMTP concrete pump SWAN TSP 38-5 RZ Initial registration date: 01/2026 700 km Vehicle equipment: MAN TipMatic 12.28 OD - MAN TipMatic Offroad, - TipMatic Efficiency, 300 l fuel tank - 35 l AdBlue tank High-performance engine brake MAN EVBec, adjustable MAN EasyStart hill start assist Differential locks on driven rear axles Suspension type leaf/leaf (BB) on front axles and driven rear axles Sun visor, in front of windshield Windshield wiper operation, automatic, with rain sensor (automatic wiping) Daytime running lights, LED - High beam assistant - Work lights on the rear of the cab Exterior mirrors, electrically adjustable, heated Driver's comfort seat, air-suspended - Armrests for driver's seat Multi-function steering wheel, adjustable in height and inclination Preparation for toll collection system Toll Collect EuromixMTP - SWAN TSP 38-5 RZ concrete pump Model: SWAN TSP 38-5 RZ Section: Concrete pump: Max. theoretical concrete capacity: m³/hr Max. theoretical concrete pressure: 85 bar Stroke rate: 30 per minute Delivery cylinder: Ø230 mm x 2100 mm stroke Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm Concrete valve: S-valve, water pump: 20 l/min - bar Water tank: 600 l, 12 m hose with spray gun Concrete hopper: 600 liters Lubrication: Lincoln automatic lubrication for hopper group Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28 Rexroth A17FO045, Blau Ascend AP 20.140/115 Switching system: Magnetic sensor (proximity switch) Control box: DIGITEX, waterproof Remote control: Scanreco remote control + 30 m cable Section: Boom: Boom S 38-5 (5-section boom, RZ folding) Type: RZ folding Max. vertical reach: 37.5 m (without end hose) Max. horizontal reach: 32.7 m (without end hose) End hose: 3 m single flange, DN 125 Platform type: X-type Slewing bearing: 365 degrees Ibodpjym S Dyjfx Akrsc Slewing speed: 0.3 RPM Diameter of delivery line: 125 mm (outer diameter 132 mm) 5.5" flanges & couplings Control system Front outrigger width: 6.3 m Rear outrigger width: 8.2 m Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, superstructure, and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica |...

Condition: used, mileage: 1,330,327 km, power: 499 kW (678.45 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/65R22.5, tire condition: 40 %, axle configuration: 8x4, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 450 l, brakes: retarder, color: blue, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: parabolic leaf (spring), total length: 7,600 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2010, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, retarder, = Additional Options and Accessories = - PTO - Radio/CD = Further Information = General Information Cab: XXL Technical Information Number of cylinders: 8 Axle Configuration Tire size: 385/65R22.5 Suspension: Parabolic suspension Front axle: Tire tread: 40%; Reduction: External planetary axles Isdez Rkh Nspfx Akrobc Rear axle 1: Tire tread: 50%; Reduction: External planetary axles Rear axle 2: Tire tread: 50%; Reduction: External planetary axles Rear axle 3: Tire tread: 30%; Reduction: External planetary axles Weights Unladen weight: 14,875 kg Payload: 26,125 kg GVW: 41,000 kg Layout Number of sleeping berths: 2 Condition Damage: None = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and meet the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website: