Used Lang Technik Makro-Grip 5-Achs-Zentrierspanner for sale (78,495)

Condition: used, Year of construction: 1999, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm control: Unipro 90 Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor Godpfoy Rmk Rex Afujkc *

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Heidenhain, controller model: TNC640, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Demonstration machine Gkodpfjywyqksx Afuec Equipment of the Axon LU 620 - Heidenhain TNC640 - 5-axis simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production package I with 42 bar through-coolant (IKZ) - Air through the spindle - Media feed through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Laser tool breakage control Blum NT A-3 Split - Paper band filter system - Spindle ring flushing system - Automatic side door - 60 magazine positions - SK40 - Scraper-type chip conveyor - Chip flushing - Extraction system

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 Gsdsytcl Ispfx Afuokc - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 146,924 km, power: 110 kW (149.56 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 18 Mercedes-Benz Sprinter 315 CDI LONG MODEL 2021. First owner. Service booklet available. Last service on 08/2025 at 131,113 km. Paint code: * 9147 Paint color Arctic White MB 9147 Interior: * VF7 Fabric Maturin black Equipment: * 212L Berlin * 9147 Paint color Arctic White MB 9147 * AI1 Control code rear axle ring gear 215 * AR2 Axle ratio I = 3.923 * BH1 Hold function * BH8 Control code hydraulic aggregate version 7 * BK1 Control code wheel brake configuration 1 * C6L Multifunction steering wheel * C907 - * CB8 Stabilization level II * CL1 Steering wheel adjustable in inclination and height * CW2 Deletion of vehicle lowering * D03 High roof * D50 Fixed partition * E07 Hill start assist * E1D Digital radio (DAB) * E1E Navigation * E1G Live traffic capability * E1U USB socket 5 V * E2N Control of Pro features in NTG6 * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Glass fiber battery 12 V 92 Ah * EE5 Ultracap - locking automatic transmission * ES0 Jump start contact * EX9 3 years of free map data updates * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Exterior mirrors, heated and electrically adjustable * F907 - * FF4 Storage compartment above headliner * FF5 Storage compartment above windshield * FJ4 Storage compartment under cockpit * FKA Panel van * FY7 Multi-button remote control * G43 9G-Tronic * H20 Heat-insulating glass all around * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Series C907/C910 Sprinter * IE0 Series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic market (Germany) * IL5 Left-hand drive * IR4 Wheelbase 3665 mm (BM - code defining wheelbase) * IT4 3.5-ton vehicle * J10 Speedometer km/h * J58 Seatbelt warning system for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI7 Starting mileage, maintenance interval 60,000 km Godpfxozgzvdj Afuokc * K13 Main tank 71 liters * KP7 Exhaust gas cleaning SCR Generation 4 * L Left-hand drive * L65 Dome light in cargo/passenger compartment with door contact * LA2 Headlamp assist * LB1 Side marker lights * LB5 3rd brake light * LC2 LED light strip in cargo compartment * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MJ8 ECO Start-Stop function * MT2 Emission class Euro 6D-TEMP N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 PS) * OH3 HU Freshup 3 * Q11 Longitudinal member reinforcement * Q67 Towing eye, rear * R65 Spare wheel holder under frame end * R87 Spare wheel * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel wheels 6.5 J x 16 * RX5 Wheels manufacturer Maxion Wheels * S22 Armrest for driver's seat, ISO-fix (child seat fastening system) * S25 Armrest for front passenger seat, center armrest rear (FFO) * S87 Driver's seat base, low * SA5 Airbag driver * SB2 Front passenger seat comfort * SB3 Driver's seat, sprung seat * SK2 Seat occupancy recognition for driver's seat * T16 Sliding door, right * T77 Grab handle, entrance cargo compartment sliding door on partition * T86 Grab handle at rear right corner pillar * V42 Tie-down rails on side wall, on the luggage compartment bulkhead

Condition: used, mileage: 69,100 km, power: 140 kW (190.35 HP), first registration: 08/2023, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, LP3 Interior lighting package, CF8 Sports suspension, Q50 Trailer coupling with detachable ball, JA7 Blind spot assist, EY5 Mercedes-Benz emergency call system, BS1 Brake calipers with Mercedes-Benz lettering, EY6 Breakdown management, G43 9G-TRONIC, CM2 Bumpers and attachments painted in vehicle color, FS5 Illuminated mirrors for sun visors, R1P Light alloy wheels 7.5Jx18, 5-spoke design, FC1 Electronic key in chrome-look, JK5 Instrument cluster with color display, LG2 LED Intelligent Light System, LG4 Tail, brake and indicator lights in LED technology, LG8 High beam assist PLUS, EZ5 Parking package, XO7 Mercedes-Benz Mobilo with DSB and GgD, EZ8 PARKTRONIC, SE5 Lumbar support for driver's seat, SE4 Lumbar support for passenger's seat, QA4 Trailer load 2500 kg, T70 Child safety lock on doors in the passenger compartment, F2Z Decorative elements, double-stripe look, T74 Grab handle for entry, HH4 Automatic climate control system THERMOTRONIC, UR1 Seat rail system with quick-release mechanism, V33 Carpeting in the rear, E1E Digital extra: Hard disk navigation, V36 Headliner, E1D Digital radio (DAB), Y10 First-aid kit, MJ8 ECO Start-Stop function, E1F Display diagonal 26 cm (10.25"), IB6 Model series C447 Vito/V-Class, ES3 12V sockets for rear seat rows right and left, ES2 12 V socket in trunk/cargo area, VD5 Interior headliner crystal gray, E1T Touchpad, H00 Warm air duct to the passenger compartment, IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), W64 Rear window that can be opened separately, US5 3-seater comfort bench EASY-ENTRY in the 2nd row in the rear, V44 Carpeting in the vehicle interior front, RM4 Comfort tires, US7 Comfort seat in 1st row in the rear right, W68 EASY-PACK tailgate, US6 Comfort seat in 1st row in the rear, We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! Gksdpfxozha Rce Afuec -Errors and prior sale excepted!! -All information without guarantee ... more on our website

Condition: ready for operation (used), Year of construction: 2011, 5-AXIS Machining Center Brand: DMG MORI Type: DMU 50 Year: 2011 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 630 x 500 mm / 300 kg 13 kW spindle – 10,000 rpm 16-position tool changer 3D probe 3D quickset Tool probe Coolant gun Electronic handwheel Chip conveyor Specifications: Table surface 630 x 500 mm X-axis travel 500 mm Y-axis travel 420 mm Z-axis travel 400 mm Gkodpfezgca Dex Afusc B-axis -5/+110° C-axis 360,000° Spindle speed 20 - 10,000 rpm Spindle power 13 KW Spindle taper SK 40 Rapid traverse XYZ 24 m/min Machine dimensions with chip conveyor 4670 x 2350 x H 2750 mm Approximate weight 4,680 kg

Condition: good (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 18,000 W, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Gsdpfx Afozkry Isuekc Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Table diameter: 500 mm Gjdjzl S Uzepfx Afuskc Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Chip conveyor Various tools Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Gjdpfxszc Dzio Afujkc Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. Gksdpfx Afezvhlksuoc · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, suspension: air, tire size: 275/70-22,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-344 SPECIAL OFFER PAVIC HTA 20 66Z short log trailer in a tried-and-tested design, always in stock at PAVIC! IMMEDIATELY AVAILABLE! You can choose the color of the stake stripes from red, green, blue, neon red, neon yellow, or black! 2-axle skeletal trailer * 4x OPTIPA SL skeletal supports * 8x OPTIPA AL10 load securing bars * Chassis length approx. 6600 mm * Front overhang approx. 710 mm (turntable) * Screw-on hooks on the loading supports for load securing * Payload 14750 kg * Technically possible total weight 22,000 kg * EBS / ABS * Air suspension with retaining cables, leaf spring suspension available on request * 2 x 10t SAF off-road axles with drum brakes or disc brakes, each in stock * Steering ring with double ball bearing row, permissible vertical load max. 20 tons * Lifting cable at the front * Smartboard Wabco * Signal lamp system at the front, clearly visible to indicate the maximum air spring pressure * LED lighting * LED work lights * High-quality KTL coating - including baking process * Twin tires: 275/70 R 22.5 with branded tires on steel rims * Optional: ALU rims from ALCOA Dura-Bright available at an extra charge Immediately available! Financing possible through our financing partners. Our sales team will be happy to answer any further questions. Gkjdpfxszqahgj Afujc This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Axle configuration Tire size: 275/70-22.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Steered Weights Unladen weight: 3,250 kg Payload: 14,750 kg GVW: 22,000 kg Functional Body brand: PAVIC short log skeletal trailer OPTIPA SL Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Gksdpsyn Ncpjfx Afusc Turning Spindle Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Drive power min.: 30 kVA Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: used, mileage: 127,000 km, power: 70 kW (95.17 HP), first registration: 03/2013, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €8,395 Mercedes Benz Sprinter MAXI – Box van (SAXAS) Registered: 03/2012 Mileage: 127,000 km ---- Please, no emails – due to time constraints, we can only process them sporadically! Thank you for your understanding! Gksdpfx Afevh S D Seusc Opening hours and further information: Viewing/purchase possible without prior appointment: No appointment required! Mon – Thu: 9:00 a.m. to 4:00 p.m. Fri: 9:00 a.m. – 1:00 p.m. Sat: 9:00 a.m. – 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen If you have any questions, please contact Christian Hirsch or our friendly staff. If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. ---- MOT: Can be performed upon request before purchase - Full service history - 1st owner - LED interior lighting - Motion detector in the interior - Sliding door between the cab and the box van - Rear view camera (see photos) - Various ventilation openings - Foldable shelves - Electrically locked doors - Rear step Loading area length: 4.40 m Loading area height: 2.00 m Loading area width: 2.00 m Special equipment: - Hill start assist - Generator 220 A - Steering wheel (adjustable steering column) - Radio preparation - Front mud flaps - Rear stabilizer - Reinforced front stabilizer - Fleece battery 95 Ah Additional equipment: - Adaptive brake light - Airbag for driver - Washer fluid level indicator - Exterior mirrors, electrically adjustable and heated on both sides - Exterior mirrors with integrated turn signal - Battery 74 Ah - Brake assist - Braking system with ABS+ASR - Roof lining in the cab - Lockable glove compartment - Body/structure: Box van - Fuel tank: Main tank 75 liters - Headlight range adjustment - Truck registration - Engine 2.1 L - 70 kW CDI - Wheelbase 4325 mm - Smoker's package - Tire repair kit with compressor - Low emissions according to Euro 5 emission standard - Seat cover/upholstery: Fabric Lima - Service interval display Assyst - Heat-insulating glazing - Permissible total weight 3.50 t If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions, please contact Christian Hirsch or our friendly staff. If you have any questions: Christian Hirsch More offers at / More offers at / Equipment determined with the help of a VIN query; technical errors may occur. Information provided on the internet is a non-binding description. It does not constitute a guaranteed characteristic. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale are subject to change.

Condition: used, mileage: 61,000 km, power: 70 kW (95.17 HP), first registration: 04/2013, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sales price: €11,700 Mercedes Benz Sprinter MAXI - Box Body (SAXAS) 19% VAT deductible Euro 5 Please no emails, as we can only respond sporadically due to time constraints! Thank you for your understanding. --- Opening hours and further information: Viewings / purchase possible without prior appointment: No appointment necessary! MON - THU: 9:00 to 16:00 FRI: 9:00 to 13:00 SAT: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen For inquiries, please contact Christian Hirsch or our friendly staff. Inquiries: Christian Hirsch Please try multiple times as we are often in customer meetings. --- More offers available at TÜV (roadworthiness inspection): New on request at sale Full service history Single owner - LED interior lighting - Interior motion detector - Sliding door between cab and box - Rear-view camera (see photos) - Various ventilation outlets - Foldable shelves - Electrically locked doors - Rear step Cargo space dimensions: Length: 4.40 m Height: 2.00 m Width: 2.00 m Special equipment: - Hill start assist - Generator 220 A - Steering wheel (mechanically adjustable steering column) - Radio pre-wiring - Front mud flaps - Rear stabilizer - Reinforced front stabilizer - 95 Ah AGM battery Additional equipment: - Adaptive brake light - Driver's airbag - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors (both) - Exterior mirrors with integrated turn signal - 74 Ah battery - Brake assist - Brake system with ABS+ASR - Headliner in driver's cab - Lockable glove compartment - Body/type: box body - Main fuel tank: 75 L - Headlamp range adjustment - Truck registration - Engine: 2.1 L - 70 kW CDI - Wheelbase: 4,325 mm - Smoker package Gkedsvh S Nuspfx Afuec - Tire repair kit with compressor - Low-emission (Euro 5 emission standard) - Seat trim / upholstery: Lima fabric - Service interval indicator Assyst - Heat-insulating glazing - Permissible gross weight 3.5 t For inquiries: Christian Hirsch Please try multiple times as we are often in customer meetings. Christian Hirsch or our friendly staff are happy to help with any questions. More offers at / Equipment determined using VIN lookup. Technical errors may occur. Details provided online are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for typos, data transmission errors, modifications, or input mistakes. Subject to error and prior sale.

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; SK40 DIN 69871 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN TNC 430 WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm Gkedpjwl R Dqefx Afusc ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: K853, mileage: 188,565 km, power: 75 kW (101.97 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 2,018 kg, maximum load weight: 1,182 kg, overall weight: 3,200 kg, axle configuration: 4x2, wheelbase: 3,400 mm, next inspection (TÜV): 01/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, sliding door, soot filter, trailer coupling, VW T5 van with high roof and long wheelbase Equipment package: Comfort Package Plus Van from 1st owner Full service history maintained by VW Low emissions Euro 5 Green environmental sticker Sortimo workshop installation Air conditioning Trailer hitch 2,200 kg braked trailer load Electric windows Electric Exterior mirrors RCD 210 audio system, radio/CD player with MP3 playback function Bluetooth hands-free system On-board computer with multifunction display Driver and passenger airbags Central locking with remote control Power steering Amber rotating beacon Partition without glass 270-degree wing doors with glass Cargo area with fresh or exhaust air fan Sliding door on the right Payload 1182 kg Unladen weight 2018 kg Gross vehicle weight 3200 kg Wheelbase 3400 mm Engine 2.0 L - 75 kW TDI Gkodpfx Aewkaafsfujc Low emissions according to Euro 5 emissions standard We sell exclusively subject to our terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday - Friday from 9:00 a.m. to 5:00 p.m. Saturdays by appointment; appointments can be made by phone outside of these opening hours. We are happy to accept your current used vehicle/equipment as part of our trade-in policy. ... Sales to businesses and exporters are given priority, and this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale are subject to change.

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, Gkjdpfx Afowtft Noujc paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 19,857 h, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Z-axis travel: 180 mm Milling unit power: 15 HP Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT Worktable with traverse Auxiliary unit for heavy parts Pneumatic clamps for door and window production Vacuum pump 250 m3/h Gkedpfx Afjx Sri Ieujc Automatic lubrication Waste conveyor

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm Gkjdpfxeycpxgo Afujc B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 X-axis Y-axis Z-axis Gksdpfeyaazmsx Afuoc 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Gjdpevtp Hbefx Afuekc Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: Gkedpfxswbhq He Afujc X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: new, Year of construction: 2026, CORMAK CMS260 Multi-Function Machine Gkjdpsv R Td Esfx Afusc The CORMAK CMS260 multi-function machine is an advanced 5-in-1 multifunctional machine combining the functions of a table saw, planer/thicknesser, spindle moulder and drill press. Designed to maximize functionality in a limited workspace, it is an ideal solution for professional woodworking shops, craftsmen and wood processing facilities looking for an efficient, precise and compact machine. Main Advantages of the CORMAK CMS260 5 functions in one machine – table saw, spindle moulder, drill press, planer and thicknesser. Three independent high-power motors – ensure continuous and efficient operation without compromise. Precision cutter block – equipped with three HSS knives, ideal for accurate surface finishing. Aluminium sliding fence – the triangular guide design increases cutting accuracy and repeatability. Saw blade angle adjustment from 0° to 45° – easy adjustment using a handwheel. Compact design – ideal for workshops with limited working space. CE compliance – complete technical and operating documentation (DTR) in Polish. Construction and Technology The CMS260 multi-function machine has been designed as a multifunctional woodworking machine in which the individual working modules operate independently, resulting in greater work efficiency and eliminating the need for additional adjustments. The machine is built on a solid steel base, ensuring stability even during intensive operation. Each function — including the table saw, planer/thicknesser, spindle moulder, etc. — has been optimized for operator safety and ergonomics. Protective guards, folding tables and an efficient dust extraction system all contribute to operator comfort and safety. Precision and Performance Thanks to the use of three separate motors (2.2 kW for the saw and planer, 1.5 kW for the spindle moulder), the machine enables intensive operation without a loss of torque. The spindle moulder offers four spindle speed settings (1,400, 4,000, 6,000 and 9,000 rpm), allowing the operating parameters to be optimally adjusted to the type of material being processed. Standard Equipment 254 mm diameter saw blade Cutter block with three HSS knives Aluminium sliding fence Folding planer tables Folding chip guard, Ø100 mm Optional Equipment Drill chuck (available for PLN 1,490 gross) Technical Specifications Table Saw Maximum saw blade diameter 254 mm Saw blade arbor diameter 30 mm Saw blade speed 4,000 rpm Saw blade tilting angle 0° to 45° Maximum cutting height at 0° to 45° 78 (63) mm Motor power 2.2 kW Power supply 400 V Planer / Thicknesser Cutter block diameter 70 mm Number of knives 3 pcs. Cutter block speed 5,500 rpm Feed rollers 32 mm Maximum planing width 260 mm Maximum planing depth 3 mm Fence tilting angle 0° to 45° Maximum thicknessing width 258 mm Maximum workpiece height in thicknesser mode 225 mm Maximum thicknessing depth 4 mm Feed speed 7 m/min Motor power 2.2 kW Main table size 920 × 410 mm Sliding table 238 × 1320 mm Dust extraction pipe diameter 100 mm Spindle Moulder Spindle diameter 30 mm Spindle speed 1,400 / 4,000 / 6,000 / 9,000 rpm Spindle clamping length 105 mm Maximum spindle travel 110 mm Maximum table opening 160 mm Motor power 1.5 kW

Condition: used, mileage: 171,650 km, power: 331 kW (450.03 HP), first registration: 06/2018, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 07/2025, color: black, gearing type: automatic, emission class: euro6, loading space volume: 18 m³, loading space length: 6,000 mm, loading space width: 2,300 mm, loading space height: 1,300 mm, Equipment: ABS, air conditioning, all wheel drive, * Sun visor * ABS Gkodevdn T Ispfx Afuoc * Radio * On-board computer * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Heated mirrors * Central locking * Rear window * Driver's comfort seat * Heated seats * Diff. lock front axle * Diff. lock rear axle * Transfer case * Off-road reduction * AP axles * Steel bumper * Orange rotating beacon * Top air intake * Maneuvering mouth * Fold-down underride guard * 12-speed * Suspension: leaf * Payload:15640 * Permanent brake: engine brake ----Body: Meiller Halfepipe rear tipper body, capacity approx. 18 m³, heavy-duty version (36,000 kg) with joint in the middle, raised front wall with excavator protection, rear chute.----Last service carried out in 11/24 at 171 tkm (own service by previous owner). Sale only to tradesmen. FOR EXPORT ONLY THE NET PRICE IS TO BE PAID !!!!! ALL INFORMATION WITHOUT GUARANTEE INS. All sales contracts, invoices, pro forma invoices, orders, sales talks are based on our general terms and conditions (see imprint).

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, For sale is a Deckel Maho machining center, type DMU 50 M with path control and manual rotation axes The machine is in very good condition, fully functional and ready for immediate use. Particularly noteworthy is the possibility of working in an open cabin Godpju Unh Isfx Afuokc Technical data: Year of construction: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed speed: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360 ° (mechanical) Swivel range: +90/ - 15 ° (mechanical) Max. load: 200 kg Space requirement: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request Transport and loading can be organized on request, at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website