Used Lange B 80 Kf-Vr Mit Fügen+Vr Funktion for sale (55,556)

Condition: good (used), axle configuration: 3 axles, first registration: 07/2018, suspension: air, color: blue, Year of construction: 2018, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Air suspension = Further Information = Axle Configuration Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Weights Unladen weight: 14,300 kg Payload: 32,700 kg GVW: 47,000 kg Maintenance, History, and Condition APK (Technical Main Inspection): Valid until 03/2027 Technical condition: good Visual condition: good Vehicle number: Low-loader: 05 Goldhofer MPA 3 / 3-axle PBW, steerable / With remote control / Extendable .: WG0MPA037J0039094 TÜV: 03/2027 - Inspection: 09/2026 PBW 3 x steerable axles Hydraulic ramps Remote control Unladen weight: 14,300 Total weight: 47,000 Length: 8.90 m, with extension 12.00 m, total extended length 15.40 m Width: 2.54 m No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Crsdjz Hq Rzopfx Adrsh Mobile: Ms. Sabine Faust Email:

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard Crsdsh R Taqopfx Adrjh - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: excellent (used), Year of construction: 2025, KT 1880B Multifunction Safety Tester KT 1880B Multifunction Safety Tester – Automated Testing in a 6U Format The KT 1880B is a compact safety tester in a 19-inch rack-mount format (5U) that combines all relevant test types into a single unit: high-voltage testing (AC/DC), protective earth testing, insulation testing, equivalent leakage current testing, functional testing, and continuity testing. The KT 1880B thus meets the requirements for efficient, safe, and standards-compliant safety testing in accordance with IEC, EN, UL, VDE, and other international standards—making it ideal for final testing, production, and quality assurance. Codpezwlfwsfx Adrsrh Technical Specifications - High-voltage test AC: 100 – 5,500 V / 0 – 3 mA - High-voltage test DC: 100 – 6,000 V / 0 – 10 mA - Insulation measurement DC: 100 – 6,000 V / 250 kΩ – 1 GΩ - Protective earth test AC: 10 – 30 A / 0 – 400 mΩ - Equivalent leakage current test AC: 100 – 270 V / 0 – 10 mA - Continuity test DC: 24 V / 0 – 600 mA - Functional test / Current consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) - Wide-range power supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Use Thanks to its integrated 4.3" TFT color display, intuitive menu navigation, and freely configurable test programs, the KT 1880B enables fully automated test sequences. The device under test requires only a single connection—no need to switch cables. This significantly reduces testing times and potential sources of error, offering a distinct advantage, particularly in automated production environments. Compliance with Standards & Workplace Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the EN 50191 requirements for safety-current-limited devices. This allows it to be operated by non-specialist personnel—making it ideal for companies with mixed testing teams. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results—even during demanding test cycles and under production conditions. Typical Applications - Series production & final testing - Type testing according to international safety standards - Production of electrical devices, components, & assemblies - Automated testing environments & test benches A Combination of Flexibility, Safety, and Automation The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test modes, fully electronic high-voltage technology, intuitive operation, and a safety-current-limited design, it meets all the requirements for modern automated testing. SPS KT 1880B Safety Tester Year of manufacture: 2025 Manufacturer's price: €6,545 (gross) Calibration date: March 6, 2025 Remaining warranty included Accessories A3/1800-K Connection and control console + CEE16; manufacturer's price: €1,318 (gross) Knürr TW 05 equipment trolley, pre-assembled with: HL 02 Holder for high-voltage test pistols SP 02 / SP 03 HL 81 Holder for protective conductor test probe PE 81-i KH 01 Cable holder Manufacturer's price incl. accessories: €3,300 (gross) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks Cedpfx Adezg Urrororh -Forklift tines: 2 pieces/1 pair -Length: 1200 mm -Cross-section: 80 x 40 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1345/600/H90 mm -Weight: 81 kg

Condition: used, mileage: 457,000 km, power: 206 kW (280.08 HP), first registration: 07/2008, fuel type: diesel, overall weight: 15,500 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro4, total width: 2,550 mm, total height: 4,000 mm, loading space length: 8,000 mm, loading space width: 2,460 mm, loading space height: 2,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, MAN TGA BOX TRUCK WITH SLEEPER CAB, 1 TON TAIL LIFT BÄR, ENGINE BRAKE ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE FEATURES * MANUAL TRANSMISSION * CRUISE CONTROL * ENGINE BRAKE * MBB BÄR TAIL LIFT 1 TON * AIR CONDITIONING * AUXILIARY HEATER * MULTI-SEATER * MULTIFUNCTION STEERING WHEEL * HANDS-FREE SYSTEM * 2 x BUNK BEDS * COMFORT SEATS * SEAT HEATING * FRONT AXLE WITH LEAF SPRINGS * REAR AXLE WITH AIR SUSPENSION Cedpfxjwyht Ee Adrsrh * ROOF SPOILER * 2 x FUEL TANKS * TRAILER COUPLING * TIRE SIZE: * 1st AXLE: 285 / 70 R 19.5 * ALL TYRES IN GOOD CONDITION * IMMEDIATELY AVAILABLE ----ACKERMANN BOX TRAILER TYPE: Z-LAF 10.577.8E, DISC BRAKES VEHICLE HISTORY * GERMAN DOCUMENTS * VIDEO AVAILABLE ON REQUEST VEHICLE FEATURES * YEAR OF MANUFACTURE: 09.07.2008 * TYPE: Z-LAF 10.577.8E * PERMISSIBLE TOTAL WEIGHT: 10,500 KG * 2 AXLES * DISC BRAKES * GFA AXLES * AIR SUSPENSION * INSULATED WALLS * ABS / EBS * REAR SUPPORTS * SPARE TIRE * LOADING AREA DIMENSIONS: * LENGTH: 7.70 M * WIDTH: 2.44 M * HEIGHT: 2.90 M * TIRE SIZE: 135 / 75 R 17.5 * VERY GOOD TIRES ----* EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5-DAY, 30-DAY LICENSE PLATES AND 17-21 DAYS AUSTRIAN LICENSE PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500 / €1,000 will be required. Changes, errors, and prior sale excepted! Find more vehicles on our homepage: Sales are exclusively carried out according to our General Terms & Conditions – see homepage Important Notice: Despite careful verification of all details in our offer, it is possible that errors may occur. Some may be caused by transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is provided without guarantee and is not legally binding. Legal Disclaimer: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. The information provided here is not guaranteed and does not constitute any warranted characteristics.

Condition: used, mileage: 47,950 km, power: 353 kW (479.95 HP), first registration: 07/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #342 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction pressure tank body, ADR Type K 14.0 / 28 PE Body: KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Outreach on stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible "Comfort version" via cassette boom with integrated filter * Tank wagon equipment according to ADR - type class AT/FL L4BH * DISCHARGE: by a pneumatically actuated piston * SLUDGE WATER OUTLET DN 80: for pushing the dirty water back into the sewer via the boom. * Manhole DN500 Chassis: MAN TGS 26.480 * 6x2 - 4BL * TipMatic with OMSI * 470 HP / 346 kW Credpfxoxc Sx Ie Adroh * EURO 6e * Fuel volume 400 l * Chassis color RAL 9010 Pure White * Cab color RAL 9010 Pure White * 2x LED rotating beacons on the cab * Rear view camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Drive: elastic, via universal joints, V-belts and pneumatically switchable friction clutch from the vehicle engine's auxiliary drive. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Outreach on stop side 5,200 mm High-pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via universal joints, V-belts and pneumatically switchable friction clutch. * approx. 240m HD hose DN 25 * Large HD hose reel for 240m 1" DN 25, 180° swiveling * Equipped with 240m DN25 * Small HD hose reel for 80m approx. DN 13 hydraulic * Equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height adjustment of the suction hose hydraulically via roller guide carriage * Outrigger arm for suction hose, hydraulic and telescopic, and swiveling by 180° * ADR design L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Halogen work spotlights, removable and swiveling * LED ambient lighting * Work functions remotely controlled via CAN-BUS technology * Wireless remote control with 14 functions * Hand washing facility (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7" color monitor including day/night switch * Soundproofing panel in front of the pump compartment * WATER SHORTAGE WARNING SYSTEM: with buzzer in the main switch cabinet and automatic pump shut-down. * RESIDUAL WATER DRAINAGE: pneumatic for all water-carrying parts with connection to the truck's compressed air system. * Large equipment box * Tool box * Holder for traffic cones * Vice * Ladder * Large advertising panels left and right * Manhole DN500 Technical data GGW 26,000KG * Unladen weight 18,530 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: . Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any liability.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 03/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Cedpfx Asz Hmcgsdrjrh Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 8 mm Middle right - 8 mm Rear left - 10 mm Rear right - 12 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Cedpfei Rixkex Adrjrh Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, mileage: 717,393 km, power: 206 kW (280.08 HP), first registration: 06/2007, fuel type: diesel, empty load weight: 9,270 kg, maximum load weight: 7,750 kg, overall weight: 18,000 kg, tire size: 295/80 R22,5, axle configuration: 2 axles, wheelbase: 5,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 2,600 mm, total width: 4,000 mm, total height: 9,900 mm, loading space length: 7,300 mm, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, truck registration, | Volvo FL 280 refrigerated box van | EURO 4 | Thermo King refrigeration unit | Suitable for frozen and fresh goods | On-the-road and stationary cooling with electric power | Partition | Dhollandia tail lift, 2000 kg, folding type | Multifunction steering wheel, cruise control | Cargo dimensions: L 7.3m, W 2.48m, H: 2.4m | Tires: 285/80 R22.5 | Subject to errors, typos, and prior sale. Crsdpfszpyatex Adreh

Condition: used, mileage: 536,380 km, power: 132 kW (179.47 HP), first registration: 06/2009, fuel type: diesel, empty load weight: 5,170 kg, maximum load weight: 2,320 kg, overall weight: 7,490 kg, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 4,200 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, loading space length: 6,100 mm, loading space width: 2,470 mm, loading space height: 2,370 mm, Equipment: ABS, additional headlights, cabin, cruise control, differential lock, low noise, power assisted steering, spoiler, tail-lift, Vehicle location: Bovenden, registration number house, 1x air seat, double bench seat, electric mirrors, heated mirrors, switch 6, ABS (anti-lock braking system), roof spoiler, leaf air suspension, air+light trailer hitch, noise reduction G1, lashing rails, U-protection, aluminum side bumper, aluminum tail lift, upright, green environmental badge Wheelbase: 4200 mm Body: Spier box body with 1t tail lift MBB type Rentfix 1000 Gearbox ZF 6S-800 OD, C-cab, MAN BrakeMatic, tank capacity: 100l. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cjdpjvhh Tpjfx Adrjrh - .

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 390 281-01, serial number: 16412040T – complete overhaul and testing performed by qualified personnel, including test report. Comes with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Csdpfxoz A N A Io Adrjrh

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 5AC800.EXT1-00 keyboard + 5AC800.EXT3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in the photos. Cjdpfjx Equ Nsx Adrorh

Condition: new, Heidenhain LC 493F ML 2040 ID: 557 642-27 linear scale, serial number: 43668026V / 5.0 Fanuc02 50 D M 0MS14.. .. 7C 01 .. 32, unused, in sealed original packaging, 100% functional, scope of delivery as per photos. Crjdpfx Ajx Dwu Rsdreh

Condition: new, Schunk GFS-32-180 universal swivel finger 355520 + accessory kit 5511461, unused, 100% fully functional, delivery as per photos Crjdpfx Adox Dw Tyereh

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Crodpfewauaxjx Adroh

Condition: used, mileage: 90,000 km, power: 380 kW (516.66 HP), first registration: 09/1994, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, Equipment: crane, Here we offer a mobile crane body from Palfinger type PK 680 TK. The crane has been completely refurbished and repainted. Many hoses have been renewed. High control from the cabin and radio remote control. * Palfinger PK 680 TK * Radio remote control * Pulpit control * 26,7 m ? 390 kg * 23,2 m ? 570 kg Crsdpfjwa Hyqsx Adroh * 19.8 m ? 900 kg * 16,4 m ? 1,170 kg * 12,9 m ? 1,590 kg * 9.4 m - 2,410 kg * Cable winch with 3,200 kg * Extendable counterweight * Completely overhauled and repainted * Many hoses renewed * Weight approx. 13,000 kg * Financing available through our partner banks, we will be happy to help you. * We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: used, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2020, loading space length: 6,300 mm, loading space width: 2,480 mm, Ref. No.: ZANDT Very well-maintained tandem flatbed trailer ZANDT Cargo * TAT B 110 * Flatbed * Reinforced wooden floor * Heavy-duty lashing rails * 2-axle tandem * Wide tires * Adjustable drawbar * Permissible total weight: 11,900 kg * Very good condition Trade-in possible Financing from 3.99% Errors and prior sale excepted! The information in this listing is non-binding descriptions and does not constitute guaranteed features. The seller assumes no liability for typing or data transmission errors. Listed equipment/features must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Business hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment! Codpfxoymuz Io Adrerh

Condition: good (used), Year of construction: 2015, Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter Credpeyhmf Ujfx Adrsh -Manufacturer: B&R, power supply module -Type: 80PS080X3.10-01 -Dimensions: 295/250/H70 mm -Weight: 3.5 kg.

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. Cjdpfeyy Rtzsx Adrorh The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. Cedpfxoc I T Txj Adrorh - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1400 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm Codpfxec Swhyj Adrerh - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5700 euros wheels incl. We are looking forward to your contact!

Condition: good (used), Technical data for the extension plates: Manufacturer: Jung Heinrich Type: MPB Included in the scope of delivery: 02x extension plates, used Overall length: approx. 400 mm Overall width: approx. 129 mm Internal width: approx. 121 mm Suitable for frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing in depth: approx. 100 mm Hole spacing in width x height: approx. 85 x 100 mm Credpfjipt Ddex Adrsh Borehole diameter: approx. 10 mm Material color: blue Weight / piece: approx. 2.59 kg Note: No screws or fasteners are included in the scope of delivery.

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Csdeq Am Ivopfx Adrerh

Condition: good (used), We are offering you a second-choice structural support beam from the manufacturer SSI Schäfer for sale. Technical data for the structural support beam: Shelf system: SSI Schäfer Type: PR 600 The scope of delivery includes: 1x structural support beam, second choice Material color: Sendzimir galvanized Overall length: approx. 1,304.4 mm Center-to-center hole distance: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per piece: approx. 1.38 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery. Crjdpoh Eg Acsfx Adreh

Condition: excellent (used), We are offering you a second-choice structural brace from the manufacturer SSI Schäfer for sale. Technical data for the structural brace: Shelf system: SSI Schäfer Type: PR 600 Crsdoh Eg Akjpfx Adrjh The scope of delivery includes: 01x Structural brace, second choice Material color: Sendzimir galvanized Overall length: approx. 1,249.2 mm Center-to-center hole distance: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.