Used Lathe E2N-500 for sale (20,029)

Condition: used, Year of construction: 2024, XYZ 1530VS x 730mm Gap Bed Manual Lathe with DRO, Swing Over Bed 390mm, Swing in Gap 610mm, Spindle Speed 20-2500rpm, Spindle Bore 54mm, Tailstock. Serial No. 11388443 (2024) Location: These lots are located in Rhayader, Wales, UK. Njdpfx Anezgfb Rjiscu

Condition: used, Year of construction: 2024, XYZ 1550VS x 1230mm Gap Bed Manual Lathe with DRO, Swing Over Bed 390mm, Swing in Gap 610mm, Spindle Speed 20-2500rpm, Spindle Bore 54mm, Tailstock. Serial No. 11308450 (2024) Location: These lots are located in Rhayader, Wales, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Nodpfxezgdz Aj Aniscu

Condition: used, Year of construction: 2024, XYZ Proturn RLX425 x 1250mm Gap Bed Lathe with Prototrak RLX Control, Swing Over Bed 480mm, Max Spindle Speed 2500rpm, Spindle Bore 80mm, Tailstock. Serial No. RLX10180 (2024) Ncjdozgdxnspfx Aniou Location: These lots are located in Rhayader, Wales, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2020, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, max table weight 226kg, table tilt +120°, -35°, 22.4kW, 10000rpm, BT40, Njdpjzg Enqefx Aniecu 30 station tool changer, coolant, swarf conveyor

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, Nsdpfxjzg Edle Anijcu maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4000 rpm, 20 hp spindle motor, 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter,

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Nedpfx Anjzg Eb Doiscu Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: good (used), Year of construction: 2007, Max. cutting diameter 340mm, Njdpfxezg Eayo Aniscu max. cutting length 400mm, 66mm Bar capacity, Spindle speed 4000rpm, spindle motor power 22kW, milling speed 4,000rpm, 12 Station Turret, FANUC 32i Control, parts catcher, parts conveyor, swarf conveyor, 3 jaw Chuck, coolant

Condition: good (used), Year of construction: 2003, 230mm centre height, Ncedpfx Anozg Eagjisu 460mm swing over bed, 270mm swing over the cross-slide, 1500mm between centres, 76mm spindle bore, 2000rpm spindle, coolant, 3 & 4 chucks, Quick Change toolpost, fixed steady

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. 01908 Nodpfx Aezgfvnjnijcu Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Hardinge KL-1 Super Precision Lathe with Anilam Mini Wizard 2 Axis DRO, 5C Collet Chuck. S/No. KL1 - 2158 Njdpfszgfp Isx Aniecu Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 1987, Feeler Series II High Accuracy Lathe, Model FTL - 618E1 with Anilam Wizard Lathe Series 2 Axis DRO. S/No. 7M171 (1987) Ncsdpjzgfnwofx Anieu Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Hardinge Conquest GT Super Precision CNC Platten Lathe with GE Fanuc 18TB CNC Control, Filtermist F7 Oil Mist Filter Extractor, Hours 37637. S/No. GTA - 959 - B Nsdpfx Aozgfmmjniscu Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. E01804 Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Nsdpjzgfk Eefx Aniocu

Condition: used, Year of construction: 2004, Citizen Cincom C16 VT Sliding Head CNC Lathe with Mitsubishi Meldas 635 CNC Control, Machining Size 16mm Max, Machining Length 200mm Max, Spindle Though Hole Diameter 20mm, Main Spindle Speed 2- = 10,000rpm, Iemca Genius 118 Type 37LL Barfeeder. S/No. 020425BA02 (2004), Filtermist MX10 Oil Mist Filter Extractor. S/No. E5516 (2004) Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Nsdpfx Ajzgfkronijcu

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Barfeed. S/No. 4662 (2002) Hours 39693 & 14215. S/No. 938205 (2002) Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Nodpozgfi Ijfx Aniocu

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Multifeed 3 - 80N Barfeeder. S/No. 4661 (2002), Filtermist FX3000 Oil Mist Filter, Hours 40691& 16285 (2002) Nodpfxozgfhqo Anijcu Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2024, 2024 Nakamura-Tome AS-200L Twin Spindle, Driven Tooling, 'Y' Axis Multitasking CNC Slant Bed Lathe with Nakamura Fanuc Control Dual Forkardt 3FNC+G 215 66 Z6 Ø215mm 3 Jaw Power Chucks. Maximum Swing Over Bed Ø400mm. Maximum Turning Ø280mm. Standard Turning Ø190mm. Maximum Distance Between Spindles 800mm. Maximum Turning Length 570mm. Bar Capacity Ø65mm. Axis Travel 'X'=212.5mm, 'X1'=200mm, 'Z'=585mm, 'Y'=±41mm. Rapid Feedrates 'X'=24m/min, 'Z'=36m/min, 'Y'=6m/min, 'C'=480rpm. Maximum Main Spindle Speed 4,500rpm Stepless (Motor 15/11kW). Through Spindle Bore Ø80mm. Draw Tube Bore Ø66mm. Spindle Nose A2-6. Maximum Sub Spindle Speed 6,000rpm (Motor 7.5/5.5kW). Through Spindle Bore Ø56mm. Draw Tube Bore Ø43mm. Spindle Nose A2-5. Dodecagonal Drum Turret 15 Position. Tool Shank 25 x 25mm. Round Tool Bore Ø32mm. Driven Tooling Maximum Speed 6,000rpm (Motor 5.5/3.7kW), Number Of Milling Stations Per Turret 15, Tool Ø1-16mm, Collet Dimension AR25. Power Supply 23kVA. Run Hours 276. S/No. KL206708 (07/2024). NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice. Nodpfx Ajzfqdzonijcu With Renishaw Tool Setting Arm in Box, Parts Catcher, Tooling In Turret, Filtermist S800 Mist Extractor, LNS Turbo MH500 Chip Conveyor, Coolant System & Manuals. Approx Dimensions L3,160 x W1,805 x H1,935mm. Weight 6,000kg. NOTE: Tooling Shown In Turret Of Machine Not Included. This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice.

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) Ncsdezfac Tjpfx Aniju X axis 32 x 5 mm Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Tailstock quill diameter 112mm / 4.4" Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Ncjdpfx Anozd Uv Ejieu Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: not inspected (used), Year of construction: 2013, DMG Mori Seiki NLX2500Y Specifications and Capacity Size and Travels Feature Inches MM Max Turning Diameter 14.0 355.6 Max Turning Length 30.0 762.0 X-axis Travel 10.2 259.1 Y-axis Travel 4.0 101.6 Z-axis Travel 32.0 812.8 DMG Mori Seiki NLX2500Y Upgrades and Features Ncjdjzfq I Tjpfx Anieu Y-axis for enhanced milling functions Advanced control software High-torque spindle Tool probing system

Condition: used, mileage: 1,251,793 km, power: 368 kW (500.34 HP), first registration: 06/2013, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2013, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - Aluminum fuel tank - Particulate filter - Headlights - Side sills - Visor - Alternating current - Toolbox = Additional Information = Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 1 mm; Tire tread depth right: 1 mm; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left inside: 2 mm; Tire tread depth left outside: 2 mm; Tire tread depth right inside: 2 mm; Tire tread depth right outside: 2 mm; Suspension: Air suspension Unladen weight: 7,833 kg Payload: 11,167 kg GVWR: 19,000 kg Damage: None Ncodszg Iwuopfx Aniju

Condition: used, mileage: 416,872 km, first registration: 10/2020, tire size: 315/70 R22.5, axle configuration: 4x2, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - Aluminum fuel tank - Alloy wheels - Particle filter - Headlights - Side skirts - Visor Nodpfx Anszg Idheijcu - Alternating current - Tool box = Additional Information = Tire size: 315/70 R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Alloy wheels; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Rear axle: Dual tires; Alloy wheels; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 5 mm; Tire tread depth right outside: 5 mm Damage: None

Year of construction: 2008, condition: like new (used), Eillert MSD-500-V Salad spinner Nedpfx Anoit I Dijiecu Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

Condition: excellent (used), 2 x DCN JetCook vessels, 500 litres and 650 litres, direct from closed Babyfoods facility. All other machinery is available for sale. Nedpfjy I Di Sox Aniecu

Condition: used, mileage: 337,172 km, power: 368 kW (500.34 HP), first registration: 05/2018, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, total length: 6,210 mm, total width: 2,540 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, seat heater, traction control, = Additional Options and Accessories = - Distance control cruise control - Alarm system - Remote central locking - Air suspension - Radio - Disc brakes - Sun visor - Lane keeping assist - Auxiliary heater - Stationary air conditioning - Tool kit = Notes = Original Dutch truck. APK / TUV: 05/24/2027. 9,000 kg front axle. Well-maintained. VEB + engine brake. Refrigerated unit. Adaptive cruise control. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle: Tire size: 315/70R22.5; Dual tires; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Weights Unladen weight: 8,262 kg Payload: 13,738 kg GVW: 22,000 kg Maintenance APK (technical inspection): valid until 05/2027 Financial Information Price: On request Ncedpfx Anezg E Eioiou Identification Model number: FH 500 4x2 GLOBE XL / 337,000 km = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) / Wouter Greutink (NL-DE-GB-ES-IT) / Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided.