Used Lisec Bsv-45 for sale (9,458)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Itedpfx Aiezvq Rco Rjk Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 7,278 h, load capacity: 4,500 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Standard Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Heater, soot filter, full cabin Iedpfxozuhhie Ai Rstk

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 10,237 h, load capacity: 4,500 kg, lifting height: 3,880 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, power: 53 kW (72.06 HP), motor manufacturer: Deutz, gearing type: hydrostat, fork length: 1,800 mm, empty load weight: 6,412 kg, total height: 2,600 mm, color: orange, motor model: BF 4M 1012E, Equipment: adjustable boom, cabin, front guard, lighting, pallet forks, sideshift, trailer coupling, Forklift truck: + Still + R70 45 + Year of manufacture 2005 + 10,237 operating hours + Deutz diesel engine, BF 4M 1012 E, 72HP + Own weight: 6,412kg + Lifting capacity: 4,500kg + Height: 260cm Itsdpfx Aiowqc Tbs Rsk + Fork length: 180cm + Lifting height: 388cm + Sideshift + Hydraulic fork adjustment + Full cabin with heating and work lights + Yellow light + Forklift from 1st owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and spelling mistakes possible, intermediate sale reserved!

Condition: good (used), Year of construction: 1988, functionality: fully functional, power: 0.37 kW (0.50 HP), Lisec titl table for line outbound transportation (i.e. to a KFL horizontal glass transport table). Itodpsrvxbiefx Ai Rsk The table is for connecting to a FPL flat press or FPS gas filling press (or similar from another brand)

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, power: 75 kW (101.97 HP), filter area: 481.7 m², total height: 7,400 mm, total length: 9,800 mm, total width: 2,450 mm, Equipment: CE marking, documentation/manual, Dust and wood chip extraction filter. Itsdpfjtzld Ujx Ai Rsk

Condition: excellent (used), Year of construction: 2010, Altendorf F45 Elmo 3-axis control Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Scoring unit: Prepared Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Crosscut fence with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Itjdpfey Sbvkox Ai Rok Extraction port: 80 and 120 mm Duplex mitre fence Year of manufacture: 2010 Price: 15,500.-

Year of construction: 2009, condition: ready for operation (used), A hydraulic CNC press brake Eht. Press force: 230t, working length: 4550mm, distance between side frames: approx. 4050mm, max. stroke: approx. 300mm, max. installation height: approx. 500mm, max. throat depth: approx. 405mm, approach speed: approx. 100mm/s, working speed: approx. 10mm/s, return speed: approx. 100mm/s, control: Cybelec ModEva 10S, operating hours: 41789h. Including various punches and dies. Weight: approx. 23,5t, machine dimensions X/Y/Z: approx. 2400mm/5200mm/3100mm. Documentation available. An on-site inspection is possible. Itodpfxezpyx Ae Ai Rsk

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 3,332 h, machine/vehicle number: 16348, load capacity: 227 kg, lifting height: 15,940 mm, overall weight: 7,620 kg, empty load weight: 7,620 kg, transport length: 6,850 mm, transport width: 1,800 mm, transport height: 2,000 mm, next inspection (TÜV): 12/2026, fuel type: electric, tire condition: 100 %, drive condition: 100 %, color: red, We are offering for sale a boom lift from our fleet, with a working height of 16 meters, which has been regularly maintained. Thanks to the continuous and regular maintenance, the machine is in excellent technical condition. The purchase price includes recently prepared inspection reports issued in the customer's name, and we also provide detailed information on the condition of the batteries. You can find the complete and detailed specifications of the machine on our website. Itsdozp Hl Njpfx Ai Rsk

Condition: used, power: 30 kW (40.79 HP), Wood chipper Manufacturer: Fransson Model: TNM – 45 Electric motor: 30kW Iodezha S Tspfx Ai Rotk Drive motors: 2×0.75 kW Complete with vibrating conveyor: length – 8.5 m Electrical cabinet

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 219937, total length: 6,500 mm, total width: 1,600 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 1,200 kg, The Futura double saw is used for crosscutting wood and aluminum. Both the saw units and the saw blades are tiltable, enabling angled cuts. These machines prove particularly useful in all types of manufacturing operations. The Futura double saw is used for crosscutting wood. Both the saw units and the saw blades are tiltable, enabling angled cuts. These machines prove particularly useful in all types of manufacturing operations. Max. saw blade diameter: 450 mm Spindle diameter: 40 mm Safety devices: 2 pieces Pneumatic saw blade feed Saw units adjustable at an angle of 45° Min. cutting length at 90°: 240 mm Maximum cutting length at 90°: 5000 mm Itodpfozvcp Rox Ai Rek Cutting width: 130 mm Cutting depth at 90°: 200 mm

Condition: like new (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: J-45-1.5, total height: 104 mm, total width: 69 mm, total length: 79 mm, input voltage: 220 V, Unused Allegheny Shredder for “high capacity, built for heavier use” Model: J-45-1.5 Manufacturer: Allegheny Paper Shredders Corporation Year of manufacture: 2019 Dimensions: 79cm x 69cm x 104 cm (LxWxH) Iodpfx Aiownbr Ro Rstk Shredder motor: 1.5 hp

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Inspection and demonstration possible by appointment. Itedpjyr H A Ijfx Ai Rsk

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of construction: 2016 Ijdjzu Sqhopfx Ai Retk TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning spread Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLC outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (including automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and single image transmission to the network (view of the first 2.5 m) Additional 10 m extension of the LLC between laser and machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine with platform design (without steel structure) Connection to STOPA large storage system (SKL or UL) Safety devices for storage system connection including 2nd light barrier circuit Storage system interface (without storage carriage) LiftMaster Compact (STOPA version) TRUMPF Laser: Solid-state laser TruDisk 8001 with one LLC outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single cutting head strategy Protective glass against lens contamination Condition check of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shut-off Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via Internet Data transmission: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust collection system Machine enclosure, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding any warranties or guarantees. Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Itedpfxoy T N T Tj Ai Rek Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: excellent (used), Year of construction: 2017, MANUFACTURER: ALUP MODEL: ALLEGRO45 SERIAL NUMBER: API126309 YEAR: 2017 POWER (kW): 45 CAPACITY (m3/min): 6.9 PRESSURE (bar): 9.75 HOURS (LOCAL/TOTAL): FREQUENCY INVERTER: yes BUILT-IN DRYER: yes HEAT EXCHANGER: yes COOLING (AIR/WATER): air ON RECEIVER TANK: no DOCUMENTATION: no CONNECTION: 1 Itodpfx Aioxyidie Rjk NEW/USED: USED

Year of construction: 1981, condition: ready for operation (used), An eccentric press is offered. Press force: 45000kg, stroke: 8mm - 60mm, stroke rate: 80rpm - 400rpm, ram adjustment: 60mm, table area X/Y: 600mm - 700mm/450mm - 500mm, ram area X/Y: 450mm/300mm, installation height: 300mm - 350mm. Digital process monitoring, electronic cam control, servo feed control, pneumatic clutch-brake combination. Weight: approx. 4500kg, overall dimensions X/Y/Z: approx. 1800mm/1400mm/2600mm. Inspection possible by arrangement. Ijdpfx Ajy Tar Hsi Rjtk

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: VD004489, power: 45 kW (61.18 HP), operating pressure: 10 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Hertz Frecon Plus 45 compressor is a high-performance industrial unit designed to meet demanding compressed air requirements. This used model offers a power output of 45 kW and operates at a maximum pressure of 10 bar, making it ideal for various industrial environments requiring a reliable compressed air supply. This oil-lubricated compressor is known for its robustness and efficiency, ensuring a long service life and minimal maintenance. The Frecon Plus series from Hertz was designed to optimize energy performance while reducing operating costs. This makes it not only economical in the long term but also environmentally friendly thanks to its energy efficiency. Overall, the Hertz Frecon Plus 45 is a reliable choice for those seeking a used compressor capable of delivering consistent power and efficiency. Its robust design and operational capabilities make it a valuable asset for any industrial facility requiring a high-performance compressed air solution. Ijdpfxezlxq Ao Ai Rjtk

Condition: excellent (used), Year of construction: 2017, Venti Oelde High performance centrifugal fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High-performance centrifugal fan V: 2559 m³/h 12 bar t: 300 C p: 0.608 kg/m³ Pw: 0.9 kW nv: 2840 1/min Iedewxu Rnopfx Ai Rstk Weight: 180 kg Year of manufacture: 2017 You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 1988, condition: good (used), functionality: fully functional, The offer includes: Herbold feed conveyor, S&S metal detector, Herbold granulator with 8, 10, and 12 mm screen baskets, 7.5 kW extraction fan made from Hardox, dedusting system with cyclone and rotary valve for separating fines from the ground material, transfer fan for Big Bag filling, Big Bag station for two Big Bags with pneumatic switching, and control cabinet with overload protection. Itodpeygv Uisfx Ai Rsk

Condition: used, maximum load weight: 32,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2016, next inspection (TÜV): 11/2026, loading space length: 13,632 mm, loading space width: 2,483 mm, loading space height: 3,000 mm, total length: 13,950 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Steel rims, air brake system, disc brake, sliding tarpaulin, sliding cover, wing doors, lift axle, BPW axles, wooden floor, used vehicle, electronic braking system. Iodpjzuh Sujfx Ai Rotk Vehicle no. 3416, ABS, EBS, ALB, air suspension with lifting and lowering system, 1st axle is a lift axle, support legs, BPW axles with disc brakes, tires: 445/45 R19.5, sliding tarpaulin on the left and right, sliding cover, wooden loading floor, pallet stop bar, lashing eyes, portal doors with double locking, cargo space dimensions L x W x H: 13.632 x 2.483 x 3.000 mm, unladen weight: 6,640 kg, total weight: 39,000 / 36,000 kg, 1st owner, please contact us for inquiries, errors and prior sale are subject to change.

Condition: used, maximum load weight: 32,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2016, next inspection (TÜV): 11/2026, loading space length: 13,632 mm, loading space width: 2,483 mm, loading space height: 3,000 mm, total length: 13,950 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Steel rims, air brake system, disc brake, sliding tarpaulin, sliding cover, wing doors, lift axle, BPW axles, wooden floor, used vehicle, electronic braking system. Isdpfxszuh Sne Ai Retk Vehicle No. 3416, ABS, EBS, ALB, air suspension with lifting and lowering system, 1st axle is a lift axle, support legs, BPW axles with disc brakes, tires: 445/45 R19.5, sliding tarpaulins on the left and right, sliding cover, wooden loading floor, pallet stop rail, lashing eyes, portal doors with double locking, cargo space dimensions L x W x H: 13.632 x 2.483 x 3.000 mm, unladen weight: 6,640 kg, permissible total weight: 39,000 / 36,000 kg, 1st owner, please contact us with any inquiries, errors and prior sale excepted.

Condition: repair required (used), Year of construction: 2024, For sale is a used Hammer planer machine A3-31 with a planing/thicknessing width of 310 mm. The machine is in like-new condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Planing/thicknessing width 310 mm - Silent Power planing shaft - Planing table, dual folding - Planing fence, swiveling 90-45° - Thickness setting 4-225 mm Iedpezuxwhofx Ai Rjtk - 4 HP (3 kW) motor, 400 volts - Machine no. 52.09.021.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-AT18K

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting width (max.): 2,270 mm, insertion depth: 9,510 mm, insertion height: 120 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 6,220 mm, input current: 32 A, total height: 2,000 mm, working width: 2,270 mm, total length: 11,510 mm, input voltage: 400 V, cutting height (max.): 110 mm, working height: 120 mm, input frequency: 50 Hz, Equipment: safety light barrier, The Zünd G3 XL-3200 is a professional digital cutting and routing machine with a working area of 2,270 x 3,200 mm and three module positions. The machine is suitable for both sheet and roll materials and features a conveyor for automatic material transport. The conveyor belt is in excellent condition. Maintenance performed by Zünd, last time on 17-08-2026. The material pass-through is 120 mm. With suitable tooling, materials up to 110 mm thick can be processed. This includes a POT Pneumatic Oscillating Tool with an 8 mm stroke and long 1.5 mm oscillating blades. This combination is suitable for cutting thick and soft materials. The machine features two UM-120 Universal Modules for various cutting, creasing, and marking tools, and an RM-120 routing module. The main tools are: UCT Universal Cutting Tool for standard blade cutting. PPT Passe-Partout Tool for 45° cuts. POT Pneumatic Oscillating Tool for thick and soft materials, with blades up to 110 mm cutting depth. RM-120 Routing Module with a 1 kW high-frequency routing spindle and a 6 mm collet. Set of 6 mm milling cutters for, among other things, foam. This allows the machine to cut, oscillate cut, make 45° cuts, route, drill, and engrave. Automatic tool initialization (ITI) ensures the setting of cutting and routing tools. For material transport, the G3 is equipped with a conveyor belt, a 1,600 mm infeed extension, and a 3,200 mm outfeed extension. In addition, a transport beam, extra drive, and a passive roll-off unit are included. The roll unit can handle material rolls up to Ø350 mm and a maximum of 70 kg. A material guide roll reduces wrinkles and creases during infeed. To secure the material, the machine has a self-regulating vacuum turbine of 1-9 kW. The integrated ICC color camera handles the recognition of registration marks and supports, among other things, border recognition, best-fit, fit-to-object, and fit-to-job. This allows printed materials to also be cut accurately. The machine is controlled with Zünd Cut Center V3.x. The configuration includes Cut Server, Cut Manager, Cut Editor, Cut Queue, Routing Option, and Camera Option. Jobs can be processed automatically via hotfolders. A wireless barcode scanner allows for automatic loading of jobs from the queue. The complete machine configuration is approximately 9,510 x 4,220 mm. Approximately 11,510 x 6,220 mm of floor space is required. The minimum ceiling height is 3,000 mm; due to the guidance of the routing module, a minimum of 3,200 mm must be taken into account for this configuration. Technical connections: 3-phase 323-457 V, 50 Hz, minimum 32 A. 30 mA type B residual current device (RCD). Compressed air 0.8-1.0 MPa (8-10 bar). Compressed air capacity 400 l/min. Minimum floor load 200 kg/m². Industrial dust/chip extraction for routing work. Extraction capacity at least 3,150 l/min, 22-25 kPa, and Ø45 mm connection. Iodpfszu Tcfex Ai Rstk In short: a fully equipped Zünd G3 XL-3200 with a cutting area of 2,270 x 3,200 mm, a material pass-through of 120 mm, and processing of materials up to 110 mm thick with suitable tools. The combination of UCT, PPT, POT, and 1 kW RM-120 allows the machine to cut and route a wide range of materials. The conveyor, automatic material feed, roll processing, camera recognition, and workflow automation make the machine suitable for both single pieces and automated production.

Condition: ready for operation (used), functionality: fully functional, rotor length: 650 mm, rotational speed (max.): 160 rpm, rotor diameter: 500 mm, TECHNICAL DETAILS Hopper opening: 1,850 × 1,250 mm Hopper volume: approx. 3.0 m³ Rotor diameter: 500 mm Rotor length: 650 mm Rotor speed: approx. 160 rpm Power: material-dependent MACHINE DETAILS Control system: PLC control Motor-gearbox power: 45 kW Control cabinet: Fully wired Ijdjzr Hylopfx Ai Retk Cable length: 5 m EQUIPMENT Control cabinet including 5 m cable Automatic star-delta starter

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 08/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 7 mm Front right - 7 mm Middle left - 5 mm Ijdpfszvb H Iex Ai Retk Middle right - 5 mm Rear left - 11 mm Rear right - 10 mm