Used M-Tec Mathis Technik Ms-150 for sale (87,071)

Condition: used, Year of construction: 1990, System for cleaning the inside of and filling kegs. Additional title: Keg cleaning and filling system Prodpfezty Tbjx Ai Tsc Capacity: 30 Keg/h

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Pjdpfx Aioz E Nh Ne Terc Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,714 h, load capacity: 450 kg, empty load weight: 10,290 kg, fuel type: electric, PB Lift S225-12ES. Year of manufacture: 2017. Working height: 22.5 meters. Platform capacity: 450 kg. Only 1.20 m wide, suitable for narrow passages. 48-volt battery with 230-volt charger. Transport weight: 10,290 kg. Well-maintained aerial work platform. Video, photos, and additional information also available via WhatsApp! Prsde Aarbnopfx Ai Toc Price: net + 21% VAT or net for export with VAT number. We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: good (used), functionality: fully functional, mileage: 125,000 km, power: 110 kW (149.56 HP), first registration: 07/2011, fuel type: diesel, color: white, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, Used truck ISUZU M 50 C 150 3-sided tipper, year 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5000 kg (C license), payload 2,500 Kg, air conditioning, ABS, Euro 5, 70% tires, mechanical spring suspension, electric mirrors + windows, radio, Km 125,000, good condition. INFO ENG: Used truck ISUZU M 50 C 150 3-sided tipper, first registration 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5,000 kg (license C), payload 2,500 kg, air conditioning, ABS, Euro 5, 70% tyres, mechanical leaf spring suspension, electric mirrors + windows, radio, 125,000 km, good condition. Predpouiyaljfx Ai Tec

Condition: used, Year of construction: 2000, number of rollers: 3, roller (top) diameter: 180 mm, sheet thickness (max.): 7 mm, overall weight: 2,465 kg, total length: 1,530 mm, Mechanical Cylinder Brand: Birlik Model: MSMS 1530-180 Weight: 2,465 kg Pjdpfx Aoylx Nmji Torc Year: 2000 Length: 1,530 mm Bending capacity: 7 mm Top roller diameter: 180 mm Motorized rear roller

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Beckhoff, working width: 6,400 mm, warranty duration: 12 months, Equipment: CE marking, cone bending device, emergency stop, Demonstration Double Bender Manufacturer: Thalmann Year of manufacture: 2024 Model: TD 150 / 6.4 m Working length: 6400 mm 12 months warranty Equipment: - CNC graphic control - Automatic rotary shear - Automatic lateral sheet metal feed with 6.4 m table - Automatic extendable sheet loading table up to 700 mm - Automatic sheet turning unit - Offset clamping and bending beam - Backgauge area 1250 mm with separate bending zones and conical function - 3 conical zones - 6 gripper units Prsdjwxwpaepfx Ai Tsc - 4 vacuum gripper units - 7 quick-load stops - Short part gripper unit - Hardox clamping beams - Crowning unit - LED lighting - M-Guard remote maintenance - Safety area scanner The machine can be inspected at our showroom in A-6800 Feldkirch. Other working lengths and models also available.

Condition: good (used), Year of construction: 2009, Manufacturer: Siebtechnik Year of manufacture: 2009 Model: HM3 Feed opening: approx. 1373x725x760 mm Electric motor: 11 kW Grinding chamber opening: approx. 320 mm Maximum feed material size: 110 mm Pedpfx Asyfgk Ssi Tjrc

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Podpfx Aozu Ryhei Tsrc Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Prsdpfx Aijz Irfve Tjc Inspection of the machine and further information are available on request.

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors to the Mahr multisensor coordinate measuring machines currently in use worldwide. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Maximum workpiece weight: approx. 40 kg on the glass plate Accuracy: U1 = 1.9 + L/200 U2 = 2.4 + L/150 U3 = 2.9 + L/100 (L = measuring length in mm) Increased accuracy available on request Traverse speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser - including high-precision USB camera with 2-stage zoom and telecentric beam path - including PTL01 TTL point laser, high-precision, telecentrically coupled - including Renishaw TP200 integrated tactile probe system, optionally expandable - including Quad-Light LED power ring light, programmable illumination - including LED power transmitted light - including Nikon precision objective 5x (optional 3x, 10x, 20x, 50x) C-mount Technology - including calibration standard with factory calibration certificate, consisting of a glass plate "circle", calibration sphere and gauge ring Transfer - state-of-the-art PT200 CNC controller system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - pull-out controller rack 19" for optimal access in the event of service - modular controller concept open for later upgrades and retrofits - service-optimized controller design for quick access and service times - integrated 64-bit broadband bus technology with real-time data transfer - 4-channel online temperature compensation preparation "on board" - active safety technology for drives, light management and sensors - online remote connection for remote maintenance and online system check - LS circuit breakers for quick fault finding in the event of service - firmware adaptation for volumetric 3D full error compensation Pjdpfx Aog Ewk Rsi Tjrc Including the powerful OptiCheck3D 5.0 software Commissioning, training and start-up support (programming) can be booked as a special package!

Condition: used, Year of construction: 1992, tube diameter 48 mm bending radius max. 90 ° total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3; 42.4; 33.7; 1/2" - mandrel length: 4500 mm Podpfx Aez Dkyqoi Torc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit Psdpswh Rp Eefx Ai Torc - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), For Sale: Silomat Pneumatic Conveying Systems / Silo Pumps (Gravity & Pressure Types) We offer a wide range of Silomat conveying systems from various brands for sale, available in both gravity (free-fall type) and pressure configurations. Psdpslf Niqjfx Ai Terc All units have been completely OVERHAULED and professionally reconditioned: Oil replacement New composite vanes New bearings Professionally sandblasted and fully painted The machines are ready for operation and available for purchase either with brand-new accessories or without. Available Gravity / Free-Fall Models (approx. 40 units in stock): PFT E100L MALTECH MB100 M-TEC F100E Contact us for more details, pricing, and available configurations.

Condition: used, Year of construction: 1993, functionality: fully functional, conveyor belt length: 2,730 mm, conveyor belt width: 360 mm, conveyor belt speed: 50 mm/s, total length: 2,730 mm, total width: 490 mm, total height: 1,620 mm, power: 0.762 kW (1.04 HP), motor manufacturer: BONFIGLIOLI, Equipment: type plate available, TAF item number: 1000004806 Manufacturer: trio-technik Year of manufacture: 1993 Overall dimensions: 2,730 x 490 x 1,620 mm (LxWxH) Podpfswgmrmox Ai Torc Width including side panel: 490 mm Width including drive: 490 mm Side panel height: 80 mm Total conveyor length: approx. 2,820 mm Conveyor length, horizontal: approx. 820 mm Conveyor length, vertical: approx. 2,000 mm Conveyor width: 360 mm Belt type: PVC, cleated belt Belt width: 400 mm Cleats: H = 20 mm, cleat spacing = 400 mm Substructure: mobile, height-adjustable, max: 1,620 mm | min: 1,250 mm Drive: chain drive Motor: gear motor Motor data: 0.762 kW Conveyor speed: 0.05 m/s, constant Net weight: 82 kg Special features: incl. ON/OFF switch Condition: Used / fully functional Function test: OK

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Stock number: 1172 Pedpfxjz Nxxao Ai Tjrc

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Podpfx Aiju Ibzkj Torc Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: excellent (used), Roller conveyors for the furniture industry, WTT Fördertechnik GmbH, Type 121 Price for: 1 unit = 75 EUR (total length 3m) For larger quantities, price on request. Detailed description: Psdpfswwmitox Ai Tsrc Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm, adjustable by +/- 25 mm Number of feet FA = 1 unit per running meter Consists of: - 2 units of side rails (side profiles), each 3000 mm long, made of profile 20/80/40/3 mm, with a grid spacing of 25 mm, holes suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. Weight per side rail: 8.15 kg - 15 units of insertable load rollers Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness, Axle - 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel-finished. Installation length IL = 500 mm Weight per roller: 2.4 kg - 3 units of screw-on bridge support feet in a stable welded construction made of special profile with cross brace, height adjustable by +/- 25 mm via threaded spindle M16 with screw slot. With floor mounting plates and dowel hole. Powder-coated in RAL 3000 red. Weight per foot: 2.5 kg. (Subject to changes and errors in the technical data and prior sale)

Condition: used, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, The machine is hardly used and fully functional. Prjdpfxoyfnd He Ai Tec

Condition: new, Snowplow TX 150 N NEW (Int. No. 11564) 1.5 m wide, hydraulic lifting, hydraulically pivoting to the right and left, rubber scraper blade, impact protection via springs, three-point linkage 56 cm, Predpfe Af Tk Eox Ai Toc robust design, for small tractors up to 40 hp Option: 10 m hose to the rear of the tractor, 450.00 EUR plus VAT. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. There is also the possibility of a trade-in for other machines.

Year of construction: 2017, condition: ready for operation (used), Offered for sale is an MR Wickeltechnik core cutting machine. Max. uncut core length: 2000mm, min./max. core inner diameter: 76.2mm/152.4mm, max. core outer diameter: 210mm, core wall thickness range: 3mm-18mm, automatic cutting width range: 8mm-600mm, manual cutting width: 2930mm, cutting tolerance: +/-0.2mm, max. core speed: 427rpm, max. feed speed: 200mm/s, cutting capacity: 18cuts/min at 76mm core inner diameter, 7mm wall thickness and 50mm cutting length, control: Siemens Simatic. Machine weight: 700kg. Equipped with fully automatic cutting cycle, manual core feeding, automatic core length detection by means of a photoelectric sensor. Documentation available. An on-site inspection is possible. Prjdpfx Aoztzq Isi Tsc

Condition: used, Year of construction: 2006, machine/vehicle number: 69950, Small mixing system, stepless mixture adjustment + flow rate adjustment, integrated constant pressure regulation independent of input pressure fluctuations + extraction fluctuations, stable stainless steel housing + easy operation. Pedszrfkcepfx Ai Torc Technical data: Input pressure bar: min 4 - max 13 Output pressure bar: max. 2.8, depending on the extraction rate Mixing gas capacity: 10 - 60 N l/min Dimensions: H 250 x W 150 x D 340 mm Weight: approx. 12 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W Prodpfx Aioxt H Hhj Tec > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SVC5003396, measuring range X-axis: 500 mm, measuring range Y-axis: 450 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, The machine was serviced by the manufacturer in August 2022! TECHNICAL DETAILS Measuring range X-axis: 500 mm Measuring range Y-axis: 450 mm Measuring range Z-axis: 300 mm Podpsyaq Hyjfx Ai Tjrc Total measuring range: 500 x 450 x 140 mm EQUIPMENT Documentation/Manual Calibration sphere Various probe extensions Renishaw 3-position probe change system ZONE3 training part Metrology software

Condition: used, Year of construction: 2017, power: 11 kW (14.96 HP), input voltage: 400 V, volume flow: 6,927 m³/h, overall weight: 1,080 kg, Equipment: CE marking, We are offering this used Höcker Polytechnik Vacumobil 350 mobile dust extraction system, model Vacumobil JT350-L, manufactured in 2017. Prodpfx Aoznulzji Tjc If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1996, functionality: fully functional, conveyor belt length: 10,800 mm, conveyor belt width: 600 mm, conveyor belt speed: 750 mm/s, total length: 10,800 mm, total width: 850 mm, total height: 370 mm, overall weight: 350 kg, power: 0.75 kW (1.02 HP), input frequency: 50 Hz, motor manufacturer: LENZE, Manufacturer: Combi-Staufner-Technik Year of manufacture: 1996 Overall dimensions (L x W x H) in mm: 10,800 x 850 x 370 Width including side rail in mm: 720 Width including drive in mm: 850 Side rail height in mm: 140 Conveyor length in mm: 10,800 Conveyor width in mm: 600 Belt type: PVC, textured Belt width in mm: 600 Support structure: None (available as an option) Running surface: Steel Drive: Head drive Predpfxjzunuie Ai Tjc Motor type: Geared motor Motor specifications: LENZE, 0.75 kW, 50/60 Hz Motor position: Right side in the direction of conveyance Conveyor speed in m/s: 0.75 Net weight in kg: 350 Special features: Condition: used / fully functional Functional test: OK