Used Macc Fully Automatic Band Saw Machine for sale (81,243)

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle Gijdpoudi Unsfx Alxet 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, Year of construction: 2015, saw blade diameter 350 mm Cutting capacity 90° (rectangle) 100 x 90 mm Cutting capacity 90° (square) 90 x 90 mm Cutting capacity 90° (round) Ø 95 mm Cutting capacity 45° (rectangle) 75 x 80 mm Cutting capacity 45° (square) 75 x 75 mm Cutting capacity 45° (round) Ø 90 mm spindle turning speed range 38/19 U/min Gjdpfx Aloygx Dysxoit power capacity 1,5 / 0,75 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 1986, condition: used, machine/vehicle number: 1358, cutting area round: 400 mm Gisdpfx Aobgnfyjlxet cutting area square: 400 mm simple forward feed length: 600 mm sawing band measures: 6200 x 38 x 1,3 mm band speed: 12 - 100 m/min sawing drive: 380 V, 7,5 kW space needed: 2850 x 2100 x 1900 mm weight: ca. 3000 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: 120 603, cutting area round: 250 mm cutting area square: 250 mm sawing band measures: 3660 x 25 x 0,9 mm band speed: 20 - 70 m/min sawing drive: 1 kW space needed: 1900 x 1450 x 1250 mm weight: ca. 850 kg Giedpfsf S Ilyox Alxet

Condition: good (used), Year: 2005 Equipment size max 320 x 420 mm min 75 x 150 mm Gsdpovp Rw Tofx Alxeit Speed max 10800 c/h Number of stitches Standard 11 Power requirements 6 kW (220/380V, 50Hz) Air requirement (6 bar) 200 m³/h Width 2730mm Depth 1800mm Weight 3000 kg (approx.) Equipment fully automatic book sewing machine • automatic feeders • 4 upper and 4 lower signatures opener • computer program • thread cut-off device

Condition: new, Year of construction: 2026, The KS 652 is a double-column, semi-automatic band saw designed as the ideal working tool for professionals who need to cut bars, pipes, profiles, and other metal structural elements — with the ability to cut at angles up to 60° to the left and right. Gijdpeyym I Uofx Alxst Machine description: Band saws from the KS series are the only machines in their class that allow cutting both to the left and right — simply set and clamp the vise. Once the material is positioned, the operator can set the angle and rotate the bow without reopening the vise or repositioning the bar. The vise moves transversely along the worktable, ensuring quick access. The cutting frame structure, made of electro-welded tubular steel, guarantees high stability during cutting. Like all IMET band saws, the KS model is equipped with high blade tension (2000 kg/cm²) and a 6° inclined saw, which improves material feed, reduces load, and optimizes cutting even for large cross-sections and solid materials. A wide worktable provides full support for the material. The machine is highly user-friendly and easy to operate thanks to the automatic stop system in the 0°–60° left/right range and the angle scale on the table, making it easier to set the cutting position. To increase cutting precision, IMET band saws are equipped with a system for detecting angular deviation from the center. A mechanical material detection system ensures rapid approach to the material by automatically detecting the first contact point. The end of the cut is managed by a microswitch in the blade guide, ensuring precise blade alignment thanks to hardened rollers and auxiliary bearings. All operating parameters and settings are controlled via an independent, mobile console with LED indicators for blade tension, blade guard, motor overheating, and electrical voltage monitoring. The console allows setting of machine operating parameters such as band speed, lowering speed, and cycle end management (options include: bow return with stopped blade, bow return with moving blade, or cycle end without bow return). Cutting performance can be further increased by using a 4 kW motor, a hydraulic blade tensioner, and a high-tension hydraulic system (2200 kg/cm²). Technical parameters: Power supply: 3-phase 400V Total power: 3 kW Arm lowering control: Hydraulic with smooth adjustment Cutting speed: 15–100 m/min Vise base height: 844 mm Blade dimensions: 5320 × 34 × 1.1 mm Dimensions: 1895 × 2870 × 2300 mm Weight: 2100 kg

Condition: new, Year of construction: 2026, The CUBO 400 NC model is a modern band saw that ensures operator safety thanks to a guard made of specially designed metal sheets, protecting all four sides and all moving parts of the machine. The guarding system allows full access to the machine and easy maintenance. An innovative and user-friendly 7" touchscreen with an intuitive interface enables full control of all machine settings. It allows programming of up to 99 cutting programs and 10 different cutting lengths on the same bar. The CNC control provides access to all machine operating functions: automatic calculation of blade thickness, number of stroke repetitions, band speed, and blade lowering speed. The interface also allows monitoring of the CUBO operating status and diagnosing irregularities thanks to a self-diagnostic function. An integrated feeder enables automatic repetition of the cutting process. The feeder moves along a hardened and chrome-plated guide; high positioning accuracy is ensured by precise feeding via a ball screw with a self-braking motor, mounted on a floating plate to absorb loads caused by irregular bars. The saw body has a rigid cast iron structure made of square-section tubes, ensuring high resistance to deformation and better performance with all types of materials. The bow is equipped with a worm screw and a crown gear made of a highly resistant bronze alloy. A mechanical material detection device ensures rapid approach of the blade to the material by automatically detecting the first cutting point. The final cut is controlled by a microswitch on the blade guide, allowing perfect band alignment thanks to hardened metal pads and additional bearings. Automatic IMET machines can be connected to a company network and operated remotely using the SAWFACTORY system and a modem. SAWFACTORY is dedicated software that enables management of the cutting process from the office by setting programs and monitoring operation via a web application. The software also allows remote technical support. Technical parameters: Gsdpfxeyym Eao Alxeit Power supply: 3-phase 400V Total power: 2.2 kW Arm lowering control: Hydraulic with smooth adjustment Cutting speed: 18–110 m/min Vise base height: 890 mm Blade dimensions: 4020 × 34 × 1.1 mm Feeder length: 515 mm End scrap: 80 mm Minimum material length: 15 mm Dimensions: 1950 × 1800 × 1990 mm Weight: 990 kg

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Gsdpfx Asv R Tgtjlxoit Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: used, Year of construction: 2003, cutting diameter 500 mm saw band length 6990x41x1,3 mm cutting width 860x500 mm cutting speed 15-90 m/min Feed 400 mm/min Rapid movement 2500 mm/min main drive motor 5,5 kW cutting length min. 8 mm total power requirement 8,5 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3,3x1,2x2,42 m Single lift 3000 mm Multiple lifts possible Optional: Infeed roller conveyor approx. 8 m Outfeed roller conveyor approx. 10 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Gjdpeyutwqofx Alxoit Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 3115, functionality: fully functional, empty load weight: 2,000 kg, feed length X-axis: 2,000 mm, saw band length: 4,870 mm, saw band width: 32 mm, TECHNICAL DETAILS Bandsaw blade length: 4,870 mm Bandsaw blade width: 32 mm Bandsaw blade speed: 110 m/min Cutting capacity (round): 340 mm Max. feed length: 2,000 mm Gijdpfx Alsyuaz Nexot MACHINE DETAILS Control: Conventional Saw type: Automatic Horizontal/Vertical: Horizontal Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,850 x 1,800 mm Net weight: 2,000 kg Transport packages: 3

Condition: used, Year of construction: 2005, dimensions of saw-band 4400 x 34 x1,1 mm Giodsyv Ncmspfx Alxet capacity 90 degrees: round 335 mm capacity 90 degrees: flat 500x335 mm cutting speed 15-150 m/min weight of the machine ca. 1.550 kg

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Gisdoiwlmcspfx Alxot Saw length 4318 mm

Condition: used, Year of construction: 2001, saw blade diameter 350 mm Gedpfjyvvpmsx Alxsit 190 mm speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m Gjdpfx Alov Nq Rmoxoit The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Operating mode: Semi-automatic Machine type: Horizontal band saw Cut: Miter cut Miter cutting range: -60° to +60° Drive power: 3 kW, 3 x 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 4780 x 34 x 1.1 mm Material loading height: 761 mm Minimum remnant length: 60 mm Sawing capacities: - 0 degrees = Round D350 mm, Rectangle 510 x 350 mm, Square 350 mm Gisdsyxcznepfx Alxet - 45 degrees R = Round D350 mm, Rectangle 400 x 100 mm, Square 340 mm - 45 degrees L = Round D350 mm, Rectangle 415 x 100 mm, Square 350 mm - 60 degrees R = Round D250 mm, Rectangle 260 x 100 mm, Square 240 mm - 60 degrees L = Round D270 mm, Rectangle 280 x 100 mm, Square 260 mm Dimensions L x W x H = 2570 x 1070 x 1500 mm Weight: 710 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, First installation in 2024 Operating mode: semi-automatic Gijdpsyxcu Ujfx Alxet Machine type: horizontal band saw Cut: miter cut Miter cutting range: -60° to 60° (L/R) Drive power: 5.5 kW, 3 × 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 7900 × 54 × 1.6 mm Material loading height: 810 mm Shortest remnant length: 40 mm Smallest saw diameter: Ø 10 mm Sawing capacities: - 0 degrees = round D640 mm, rectangle 820 x 640 mm, square 640 mm - 45 degrees R = round D560 mm, rectangle 560 x 400 mm, square 540 mm - 45 degrees L = round 580 mm diameter, 580 x 560 mm rectangle, 560 mm square - 60-degree R = Round 380 mm diameter, 380 x 250 mm rectangle, 360 mm square - 60-degree L = Round 400 mm diameter, 400 x 530 mm rectangle, 400 mm square Dimensions (L x W x H): 3750 x 2400 x 2700 mm Weight: 2500 kg

Condition: used, 1 used band saw automatic machine Manufacturer: Berg & Schmid Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Band run monitoring with automatic feed adjustment - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive - Clamping pressure regulation for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Gsdpfx Aloytvqqoxoit Drive power: 5.5 kW Working height: 730 mm Paint finish: platinum grey RAL 7036 and turquoise RAL 5018

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Gijdpfevyl Ihjx Alxot Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 16.456 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2018, machine/vehicle number: 68892, Offer 26014 Hydraulic, Two-Column Guided Mitre Band Saw Automatic Machine Technical Data: - Automatic work cycle for cutting operation, hydraulic lifting / lowering of the saw frame, manual mitre adjustment with hydraulic clamping - Automatic material feed system, motorized mitre adjustment - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed, infinitely variable: 15 - 150 m/min - Cutting pressure regulation, infinitely variable: 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: - 30° to 90° - at 90° round: 335 mm - square-flat: 500 x 335 mm - at 45° round: 330 mm - square-upright: 320 x 335 mm - at 30° square-upright: 170 x 335 mm - Material feed automaton - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Required space (approx.): W 2300 x H 1750 x D 2200 mm Giodpfx Ajytn Dijlxjt - Weight (approx.): 1800 kg

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- Giedoyqr Utopfx Alxst binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, 1 brand new semi-automatic high-performance horizontal band saw with double column guidance and 2° cutting angle relative to the table surface Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: BMSY 330 C Technical Data: - Cutting capacity 90° round: 330 mm - Cutting capacity 90° rectangular: 360 x 330 mm - Cutting capacity 90° square: 330 mm - Cutting capacity 45° round: approx. 250 mm - Cutting capacity 45° rectangular: approx. 250 x 325 mm - Cutting capacity 45° square: approx. 250 mm - Saw blade size: 5000 x 34 x 1.1 mm - Infinitely variable band speed: 20 -100 rpm - Working height: 635 mm - Motor power: 3 kW - Hydraulic motor: 0.55 kW - Dimensions (L x W x H): 2830 x 920 x 1630 mm - Machine weight: 1030 kg Gedpfx Aljfk Eu Nexeit Accessories / Special Features: • Semi-automatic double-column band saw • Linear guides • 2° bevel cut to table surface • Infinitely variable cutting speed via potentiometer at control panel • Hydraulic vice • Hydraulic-mechanical saw blade tensioning • Powerful drive motor • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant system • Feed roller conveyor 1200 mm • Chip removal brush • 1 pc. Bi-metal saw band • Control panel • CE compliant Delivery time: approx. 8 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: new, Fastech Horizontal Double Miter Band Saw Semi Automatic BMSY 440 DGH Round cutting range: mm 440 Flat Cutting range: mm 610 x 440 Square Cutting range: mm 440 +30 ° Round Cutting range: mm 400 +30 ° Flat Cutting range: mm 500 x 440 +30 ° Square Cutting range: mm 440 +45 ° Round Cutting range: mm 440 +45 ° Flat cutting range: mm 410 x 440 +45 ° Square cutting range: mm 410 +60 ° Round Cutting range: mm 320 +60 ° Flat cutting range: mm 250 x 440 +60 ° Square cutting range: mm 250 -30 ° Round cutting range: mm 440 -30 ° Flat cutting range: mm 500 x 440 -30 ° Square cutting range: mm 410 -45 ° Round Cutting range: mm 410 -45 ° Flat cutting range: mm 410 x 440 -45 ° Square cutting range: mm 410 -60 ° Round cutting range: mm 320 -60 ° Flat cutting range: mm 285 x 440 -60 ° Square cutting range: mm 285 Engine power main drive: kW 3 Hydraulic pump power: kW 0,55 Engine power coolant pump: kW 0,12 Belt speed: stepless m/min. 20 - 100 Saw band dimensions mm 5200 x34 x 1,1 working surface height: mm 860 weight: kg 1540 Gisdpfohpil Eex Alxet length / depth / height: mm 2800 / 1210 / 1870 Double miter saw Infinitely variable band speed, hydraulic vice sensitive cutting pressure regulation High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for miter angle

Condition: new, Fastech horizontal bandsaw semi-automatic machine BMSY 320 DGH saw band dimensions: 4160x34x1,1 mm band speed: 20 - 100 m/min infinitely variable Cutting capacity 0° rectangular: 450x320 mm, round 320mm Cutting capacity 30°: round 320 mm, square 320 mm, rectangle 410x320 mm Cutting capacity 45°: round 320 mm, square 320 mm, rectangle 330x320 mm Cutting capacity - 30°: round 320 mm, square 320 mm, rectangle 420x320 mm Cutting capacity - 45°: round 320 mm, square 320 mm, rectangle 340x320 mm Cutting capacity - 60° : round 240 mm, square 220 mm, rectangle 230x220 mm working height : 860 mm coolant pump motor: 0.12 kW hydraulic motor: 0.37 kW motor: 2.2 kW length: 2260 mm width: 1160 mm Height: 1700 mm Weight: 1030 kg Double mitre saw infinitely variable belt speed Gsdpfsg Ekp Nex Alxsit hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Condition: new, Fastech horizontal bandsaw semi-automatic BMSY 360 DGH ECO Round cutting range mm: 360 Flat cutting range mm: 510 x 360 Square Cutting range mm: 360 +30 ° Round cutting range mm: 360 +30 ° Flat Cutting range mm: 440 x 360 +30 ° Square Cutting range mm: 360 +45 ° Round Cutting range mm: 360 +45 ° Flat cutting range mm: 390 x 360 +45 ° Square cutting area mm: 360 +60 ° Round cutting range mm: 200 +60 ° Flat cutting range mm: 200 x 360 +60 ° Square cutting range mm: 200 -30 ° Round cutting range mm: 360 -30 ° Flat cutting range mm: 440 x 360 -30 ° Square cutting range mm: 360 -45 ° Round cutting range mm: 360 -45 ° Flat cutting range mm: 390 x 360 -45 ° Square cutting area mm: 360 -60 ° Round cutting range mm: 260 -60 ° Flat cutting range mm: 260 x 360 -60 ° Square cutting range mm: 260 Engine power main drive kW 3 Hydraulic pump power kW 0,37 Engine power coolant pump kW 0,12 Band speed, infinitely variable: m/min.20 - 100 Gsdpfjg Ekttjx Alxeit Saw band dimensions mm: 4800x34x1,1 Working surface height mm: 860 weight kg: 1450 length / depth / height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Condition: good (used), Year of construction: 2003, Horizontal bandsaw fully automatic with gripper feed Cutting capacity 90° round: 400 mm Gedpfeynaz Njx Alxjit square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lifting, and material feed • Gripper feed system • Screw conveyor swarf remover • Fully automatic operation or single cuts • Automatic bow lifting height adjustment according to material diameter • Max. cut length: 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw band tension with automatic shutdown in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel