Used Magnetizing Fixture Mf-Ri8 For Impulse Magnetizer Magnet-Physik for sale (6,409)

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Gkedpepcf Etefx Afuec Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: used, Safety switch, Safety Switch, Magnetic door contact safety switch, Surface magnet, Electromagnetic locking system, Electric door opener -Manufacturer: BSW, surface magnet door contact safety switch Ovp Gsdper Im R Uofx Afuokc -Type: EF150UPCTC -Operating voltage: 12/24 V -Number: 2x electric door openers available -Price per piece -Dimensions box: 280/95/H40 mm -Weight: 1,3 kg/piece

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Power: 4.3 kW -Voltage: 179 V -Speed: 2000 rpm Godsct Erdjpfx Afujkc -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 525/190/H190 mm -Weight: 52 kg

Condition: used, Permanent magnet motor, permanent magnet motor, gear motor, electric motor, servo motor -Power: 22 Nm Godec Uz Hrepfx Afuekc -Speeds: 300 rpm -Protection class: IP 54 -Voltage: 24 V -Diameter: Ø 15 mm -Price: per piece -Number: 7x available -defective foot: 1 -Dimensions: 380/110/H160 mm -Weight: 9.1 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 5x SK50 holders Gkjdpfx Afsc U Tzqsujc -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 19.7 kg

Year of construction: 2004, condition: used, High-performance band resaw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roll diameter 1250mm Roll width 150mm Saw blade speed: 28-50 m/s Connected power: approx. 45kW Feed rollers 2x4 Roller height 200mm Cutting height up to the lower edge of the pressure guide: 400mm and higher Cutting width 250mm to the left of the saw blade and 250mm to the right of the saw blade with center cutting device complete technical documentation Original photos will follow. Gedpfx Afodfcryjuskc

Year of construction: 2004, condition: used, High-performance band saw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roller diameter 1250 mm Roller width 150 mm Saw blade speed: 28-50 m/s Connected power: approx. 45 kW Feed rollers 2 x 4 Godpfedfcv Iox Afujkc Roller height 200 mm Cutting height up to the lower edge of the pressure guide: 400 mm and higher Cutting width 250 mm to the left of the saw blade and 250 mm to the right of the saw blade with center cutting device complete technical documentation Original photos will follow

Condition: good (used), electric magnetic plate, chuck, magnetic chuck, magnetic chuck -Clamping surface: 1000 x 255 mm -Connection: 100 volts DC Gsdpfx Afsdu Ufajuokc -Dimensions: 1000/255/H98 mm -Weight: 140 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals Gkedpfx Afjd Dy Ugsusc L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: used, Gas and air filters, air filters -Manufacturer: Maxitrol Gedpsd D Iq Dsfx Afuskc -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Condition: good (used), Tool holder, milling holder, milling tool -Number: 25x SK50 mounts -various: versions Gkjdpfx Ascwb Nnefujc -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 100 kg

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Power: 38 Nm -Voltage: 286 V -Speed: 2000 rpm -Power: 46 Nm -Voltage: 143 V -Speed: 1000 rpm -Shaft: Ø 38 mm -Construction: B5 Godpfx Afscwqddjuokc -Protection class: IP 64 -Dimensions: 450/190/H240 mm -Weight: 39 kg

Condition: used, Tool holder, milling holder, milling tool Gkedpfjcx Sdpsx Afusc -Number: 9x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 34 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 5x SK45 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools Gsdpfoc Innlex Afuskc -suitable for: tool changer -Sale: only complete -Weight: 14 kg

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor -Power: 10 kW -Max. speed: 6000 rpm -Shaft: Ø 42 mm -Protection class: IP 23 -Number: 1x motor available Gjdpfjdpkztsx Afuskc -Dimensions: 880/380/H320 mm -Weight: 136 kg

Condition: used, Lifting magnet, crane magnet, hoisting magnet, lifting magnet BAKKER MAGNETICS Mechanically switchable lifting magnet, mechanical load magnet Type: BM 400 Year of manufacture: 1998 Lifting capacity: 400 kg Size of the magnet surface: 190 x 155 mm Own weight: 36 kg With manual changeover lever Crane eye for attachment Lifting capacity of 400 kg at a distance of 0.0 mm to the material and a minimum material thickness of 30 mm. Gkjdpfx Afexciwhjuec

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange Gedpsxd Upfefx Afujkc -Type: PUSd-200 -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm -Total weight: 8 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm Gkedeyrhppjpfx Afujc 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: excellent (used), drilling depth: 1,000 mm, overall weight: 20,000 kg, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 380 mm, drill diameter: 40 mm, rotational speed (max.): 4,200 rpm, table length: 1,000 mm, table width: 800 mm, table load: 9,000 kg, feed length W-axis: 500 mm, Equipment: rotational speed infinitely variable, IMSA DEEP HOLE DRILLING MACHINE, MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS 1250 TRANSVERSE AXIS (MILLING SPINDLE) 380 mm TRANSVERSE HEAD TRAVEL 500 mm VERTICAL TRAVEL 1000 mm MAXIMUM DRILLING DEPTH 1000 mm MAXIMUM DRILLING SPINDLE SPEED 4200 RPM MAXIMUM DRILLING DIAMETER 40 mm MAXIMUM MILLING SPINDLE SPEED 4000 RPM Gkodjytff Dspfx Afuec MAXIMUM THREADING SIZE M 40 MAXIMUM MILLING DIAMETER 65 mm SPINDLE TRAVEL 380 mm ROTARY TABLE DIMENSIONS 1000x800 MAXIMUM WEIGHT WITH STATIONARY TABLE 9000 KG MAXIMUM WEIGHT WITH ROTATING TABLE 4000 KG TOTAL MACHINE WEIGHT 20,000 KG

Condition: used, offer consists of: extra knife for Horizon, set of 2 FC-10, FC-10II, FC-11 Gsdpfxow Eu Utj Afujkc We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 VERSION 400 YOM 2010 Gkedpfx Afeya I Sgousc 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml AS NEW CONDITION LOCATION - POLAND READY FOR SHIPPING

Year of construction: 2022, condition: like new (used), Magnetic filter: Suspension height: 360 mm Magnet dimensions (W x L): 90 x 92 cm Suitable for belt width 1000 mm Godpfsyftf Aex Afuokc Air cooled

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. Gkodpfxozq A A Hj Afujc - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Graf Wet Blasting System Machine type: Wet blasting system Godpfx Afjztyzljuekc Manufacturer: Graf Technik GmbH Type: Compact 2 Plus Year of manufacture: 2013 Control system: Siemens Origin: Germany Location: Albstadt Delivery time: upon agreement

Year of construction: 2025, condition: new, Magnetic table, 60 kg/square meter, 18x18 milling pattern for milling machines. Magnetic clamping plate 200x300x80mm, 60 kg/square meter, 18x18 milling pattern – 470 EUR Magnetic clamping plate 200x400x80mm, 60 kg/square meter, 18x18 milling pattern – 660 EUR Magnetic clamping plate 300x400x80mm, 60 kg/square meter, 18x18 milling pattern – 800 EUR Magnetic clamping plate 300x600x80mm, 60 kg/square meter, 18x18 milling pattern – 1100 EUR Magnetic clamping plate 400x800x80mm, 60 kg/square meter, 18x18 milling pattern – 1880 EUR Magnetic clamping plate 400x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2300 EUR Magnetic clamping plate 500x1000x80mm, 60 kg/square meter, 18x18 milling pattern – 2800 EUR Gjdpszd Rlvsfx Afuokc Round magnetic clamping plates of this type with a diameter of 200-800 mm.