Used Markierheld Laser Marking for sale (7,572)

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Pgjdpfx Aisziwwierst Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: new, Year of construction: 2025, functionality: fully functional, laser wavelength: 1,064 nm, AL-IN 300 W, laser welding machine, demonstration unit, like new, 1-year warranty, mounted on the original pallet, partially still packaged. Additional demo units available on request. Sales only within the EU. - X, Y, Z axes powered, operable via joystick and semi-automatic mode - User coordinate system (UCS) – automatic Z-axis guidance for welding on inclined planes Accessories: Tilting/swiveling optics Ergonomic wedge for optimal working position Multi-function foot switch Angled base with table plate for ALT-base C Beam deflection unit, swiveling 110° L/R, including 12V External cooling (unregulated) Laser welding consumables, Lawitex starter kit. As a laser welding wire manufacturer, we can create a custom wire selection for your specific requirements. Welding parameters will be personally explained, saved, and made easily retrievable for you. We supply genuine Alpha Laser spare parts and offer application/product training as well as service at attractive conditions. We are the official sales partner for Alpha Laser laser welding systems. With almost 30 years of experience in welding technology, we offer advanced laser welding technology from a single source. Inquiries, explanations, welding training, and instruction (also by phone) are available in German, English, and Polish. Supplier Podopcf Ntepfx Airjgt Lawitex GmbH 40764 Langenfeld (Rheinland), Germany

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: X2001/023, Titus™ is the smallest, lightest, and easiest-to-integrate laser marking head in the world. That’s exactly what makes Titus™ ("tiny tubus") so outstanding, and why the world’s smallest laser marking head will remain compact. This makes it the ideal solution wherever production environments have limited space: with Titus™, the new 20 W and 30 W fiber laser markers Y.0200-xs and Y.0300-xs are not only incredibly small, but also extremely easy to integrate. This opens up new application areas for rapid direct part marking with lasers, especially in the automotive, aerospace, and electronics industries. Thanks to its high integration flexibility, strong throughput, and significant operating cost savings, Titus™ enables customers to fully realize their marking potential. Think small. Achieve bigger. Pedpjw Nprgofx Airsgt Main fields of application: Electronics industry, automotive manufacturing, automotive supply industry, system integrators, plastics and metalworking industries, mechanical and tool engineering, marking on stationary or moving parts.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° Pgsdpfxow A H T Ae Airot C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) Pjdpfscuiz Sex Airjgt pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control

Condition: new, Year of construction: 2025, functionality: fully functional, 6KW Thunderbird flatbed laser 3000mm x 1500mm Precitec Procuter 2.0 Metalix CAD/CAM software Subject to errors and omissions. Pgodoxpqcfspfx Airjt

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: Y2311/355, The powerful fiber lasers of the Y-Series are ideally suited for industrial product marking. They are used in almost all metal and plastics processing industries for precise and economical direct part marking (DPM / Direct Part Marking) of products and components: from automotive manufacturing to medical and security technology, and all the way to electronics. All types of codes (QR codes, DMC / DataMatrix codes, barcodes), alphanumeric characters, logos, and inscriptions are marked reliably and with high precision using these fiber lasers. The optionally integrable camera system in the marking head ensures zero-defect quality and process reliability through automatic optical validation and verification steps. With its modular design, this fiber laser series offers maximum flexibility and enables straightforward adaptation to product-specific marking requirements as well as easy integration into production lines and FOBA workstations: Nine fiber lasers of different power classes and pulse widths are combined within a modular platform. Marking field calibration and parameter sets for optimizing marking quality, accuracy, and speed enable optimal configuration for any given application. Main application areas: Medical technology, automotive manufacturing, automotive supply industry, integrators, plastics and metal processing industries, mechanical engineering and tool construction, electronics industry, security technology, ID and personalization sector (card, ID, and passport personalization), stationary and continuous marking applications. Pedew Npvfspfx Airjgt

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Pjdpfoxal A Usx Airegt Errors and omissions excepted, subject to prior sale!

Condition: good (used), Year of construction: 1997, Lifting capacity: 1.300 kg Max. sheetsize: 4.000 x 2.000 mm No. of cups: 19 pieces Pgodpfxewavuks Airjt Size LxWxH: 480 x 200 x 250 cm Weight: 1.400 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit Pgedjy Samuspfx Airet - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: refurbished (used), Condition: refurbished, since then unused and professionally stored in case of the manufacturer Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm up to 4 kW mappings: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber connector: Trumpf B or type D (LLK Auto) Laser: CW laser up to 4 kW working range height (Z): ± 5 mm Robot adaptation: any Pjdpfx Aieg Sfdloregt Repaired/exchanged - Lens - pressure spring - protection spring - cover - Beam diaphragm - Wave spring - Fiber coupling weft The unit was also cleaned, adjusted and force-normalized.

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Pedpsg Dvdcefx Airogt Made in Germany The pictures show you an older bigger machine

Condition: new, Year of construction: 2026, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 3,000mm x 1500mm Connection value max. 30kW Installation area approx. 9,000mm x 3,000mm x 2,200mm The machine is included 12 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. Pedjzyaf Ropfx Airogt We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 20 years, of which we have been selling their fiber lasers for around 15 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Psdpozvrmxjfx Airjgt Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Podezx Sxgspfx Airsgt Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, total height: 900 mm, total length: 900 mm, total width: 700 mm, overall weight: 180 kg, input voltage: 380 V, type of input current: three-phase, laser hours: 15 h, laser power: 3,000 W, laser type: fiber laser, laser source manufacturer: Max Photonics, Equipment: documentation/manual, Hongniu HN-2000H – 3000W Fiber Laser Cleaning Machine Industrial fiber laser machine for fast removal of rust, paint, coatings and surface contamination. This is an ex-display/demo machine and has been used for only approximately 15 hours. It is in excellent, very clean condition. Specifications: 3000W MAX Photonics laser source Industrial water chiller 10 m cleaning torch cable Dimensions: 900 × 700 × 900 mm Weight: 180 kg Included: Pjdpfx Aiszy D Dksrsgt One-year supply of protective lenses Nitrogen cylinder 20 m extension cable An invoice will be provided. The machine is located in İzmir, Türkiye, and is available for inspection.

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Pgjdszy Hpiopfx Airst Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 1 months, positioning accuracy: 5 mm, Equipment: documentation/manual, The official FARO distributor is selling a demo unit – the FARO Orbis Premium mobile scanner. The package includes: - FARO Orbis Premium mobile 3D laser scanner - Datalogger portable control unit Pgjdpfx Ajzzdpveirst - 2 batteries - Battery charging station - Connection cable - Monopod tripod - Phone mount - FARO calibration certificate - Durable original case The unit is from 2025, comes with a calibration certificate, and has a valid warranty. It has been lightly used – for customer demonstrations and at trade shows. The mobile scanner is in excellent condition. It provides 3D laser scanning with 5mm accuracy, allowing for very fast scanning of large areas, buildings, and rooms. The stationary Flash mode allows scanning with 2mm accuracy. Technical specifications: - Accuracy: 5mm (2mm in Flash mode) - Scanning distance: 120m - LIDAR channels: 32 - Camera: 72MP - Operating time with 1 battery: 3-4 hours The unit is located in Riga, Latvia, and can be viewed in person or remotely.

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Podswh Ulqopfx Airsgt Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm ALUMINUM 14 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: used, functionality: fully functional, Year of construction: 2002, laser type: CO₂ laser, laser source manufacturer: Coherent ROFIN, laser source model: DC030 SLAB, laser hours: 4,800 h, laser power: 3,000 W, Equipment: CE marking, Laser generator Coherent ROFIN DC030 SLAB Laser Compact Pedpfx Aiezzxyvjregt Year of manufacture: 2002 LasCon control system The laser is in very good technical condition and fully functional. It can be offered as a COMPACT version or as a Split/Standard version. A complete overhaul and major maintenance can be offered as an option. The technical specifications and operating parameters of the laser comply with regulations and demonstrate the full output power, with corresponding power reserve. This source can be used, among other things, for "Die Board" systems (die manufacturing) with a rotary axis. A price quote can only be provided after all technical details have been clarified. High-voltage operating hours: approx. 25,400 hours Tube operating hours: approx. 4,800 hours

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Pjdpfx Aiszzw Irorsgt Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm With loading and unloading system for the sheets

Condition: excellent (used), functionality: fully functional, Manufacturer AMADA Model AC255NT Year 2008 Machine type CNC Turret Punch Press Punching force 20 tons / 200 kN Pgsdpfxozzn Tlj Airot Drive system Single AC Servo Drive CNC control AMNC-F X-axis travel 1,270 mm Y-axis travel 1,270 mm Sheet capacity with repositioning Approx. 2,500 × 1,270 mm Max. mild steel thickness Approx. 3.2 mm Max. workpiece weight Approx. 150 kg Max. punching diameter Approx. Ø88.9 mm Turret configuration Depending on configuration: 45 / 51 / 58 stations Auto Index stations Depending on configuration Turret rotation speed Approx. 30 rpm Auto Index speed Approx. 60 rpm Max. punching speed Approx. 370 strokes/min Marking speed Up to approx. 900 strokes/min Punching accuracy Approx. ±0.1 mm Power requirement Approx. 19 kVA Air pressure Approx. 5 bar Machine weight Approx. 12,000 kg Machine dimensions Approx. 4,100 × 2,560 mm, depending on configuration Feeder Automatic sheet feeder / loading system Sheet size for feeder Approx. 1,250 × 2,500 mm fully functionel

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Maximum performance for modern tube and profile processing The ACME tube and profile laser system was developed for the highest demands in industrial manufacturing and combines precision, productivity, and flexibility at the highest level. Thanks to its powerful design and intelligent automation, it is ideally suited for steel construction, mechanical engineering, plant engineering, metal processing, and demanding job-shop operations. The innovative machine concept with four high-precision chucks, three movable clamping systems, and vertically arranged guides ensures exceptionally stable workpiece guidance. This allows even long, heavy, or complex tube and profile geometries to be processed with the highest accuracy. The system is available in various versions for tube diameters of Ø 280 mm, Ø 360 mm, Ø 550 mm, Ø 640 mm, and Ø 800 mm and can be optimally adapted to individual production requirements. With available laser powers from 3 kW to 20 kW and processing lengths of up to 12 meters, the ACME tube laser system offers maximum performance reserves for a wide range of applications – from thin-walled profiles to heavy structural tubes. Your advantages at a glance ✔ Four high-precision chucks for maximum processing accuracy ✔ Three movable clamping systems for optimal workpiece guidance ✔ Vertical guide structure for maximum stability and dynamics ✔ Tube diameters up to Ø 800 mm available ✔ Processing lengths up to 12,000 mm ✔ Laser powers of 3 kW, 6 kW, 12 kW and up to 20 kW ✔ Innovative 45° laser head for weld preparation and complex contours Psdpfxezb Irpe Airogt ✔ Semi-automatic loading and unloading for efficient production processes ✔ Integrated small parts conveyor for automatic parts removal ✔ High process reliability thanks to high-quality brand-name components ✔ Full CE compliance according to European safety standards ✔ German-speaking service and professional online support Technical highlights Powerful tube processing Tube diameter: Ø 280 mm to Ø 800 mm Processing length: up to 12,000 mm Four-chuck technology Remainder optimization through intelligent clamping technology High dynamics with maximum positioning accuracy Advanced cutting technology Laser powers from 3 kW to 20 kW Precise contour and miter cuts 45° laser head for weld preparation Optimal cut quality for a wide range of materials Automation for maximum productivity Semi-automatic loading and unloading system Automatic small parts disposal via conveyor Reduced downtime Higher output with less personnel Typical application areas Steel and hall construction Mechanical and plant engineering Metal and tube processing Vehicle and commercial vehicle construction Agricultural technology Facade and railing construction Furniture and profile manufacturing Job-shop operations Quality and safety The ACME tube and profile laser system meets all relevant European safety requirements and is delivered CE-compliant. High-quality components from leading manufacturers ensure a long service life, high availability, and maximum investment security. ACME tube and profile laser system More performance. More precision. More possibilities. The intelligent solution for economical and highly productive tube and profile processing in modern manufacturing.

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability Pgsdpsztb Elofx Airot • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, pipe diameter (max.): 210 mm, pipe length (max.): 6,000 mm, workpiece weight (max.): 800 kg, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, total length: 12,000 mm, total width: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, FOR SALE: High-Precision 3000 W Fiber Laser Tube Cutting Machine (6 m) Industrial-grade 3 kW tube laser equipped with a side-loading system, a premium IPG YLS 3000 laser source, and a German LT Ultra bevel cutting head. A powerful and versatile solution for cutting round, square, rectangular, and oval tubes, as well as special profiles, with bevelling up to 45°. Machine origin & key details Loading system: side-loading Year of manufacture: 11/2017 (commissioned in Finland in 2018) Laser source: IPG YLS 3000 – 3000 W fiber laser, manufactured in the USA Bevel cutting head: LT Ultra-Precision Technology, manufactured in Germany Filtration: Welldone dust collector and filtration unit Key highlights Versatile tube profiles – round, square, rectangular, and oval tubes, plus open and custom shapes 3D bevel cutting – integrated bevelling up to 45° for high-precision weld preparation High speed & accuracy – max. operating speed 100 m/min, acceleration 1.0 G, positioning accuracy ±0.03 mm Heavy-duty capacity – tubes up to 6 m in length, max. load 800 kg Technical specifications Parameter Specification Laser power 3000 W (3 kW) Laser source IPG YLS 3000 (manufactured in the USA) Bevel cutting head LT Ultra-Precision Technology (manufactured in Germany) Filter / dust collector Welldone Loading system Side-loading Year of manufacture 11/2017 (commissioned in Finland 2018) Max. material length 6000 mm (6 m) Round tube diameter Ø 20 – Ø 210 mm Square / rectangular tube size 20 × 20 mm – 150 × 150 mm (any side) Bevel cutting angle ≤ 45° X/Y positioning accuracy ±0.03 mm Pgsdpfxezuf Dhe Airst X/Y repeat positioning accuracy ±0.02 mm / 1000 mm Cutting gap width 0.1 – 0.2 mm Max. operating speed 100 m/min Max. acceleration 1.0 G Max. loading capacity 800 kg Machine weight 4000 kg Machine dimensions (L × W × H) 12 000 × 2500 × 1900 mm Gross power < 40 kVA Power supply 380 V ±5 %, 50 Hz Operating temperature / humidity 0 – 40 °C / < 90 %