Used Maw Bev for sale (541)

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Nedpfx Aaexaqa Sj Iolc Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle Nedpfx Aajrtrzds Iolc (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Nljdpfjxdfazox Aa Ijc Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Nlodsxdfa Ujpfx Aa Ijc Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Nodpfx Aasrtryke Iolc Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t Njdpfx Aevr Hf Eea Islc dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Nledpfx Aajulpu Sj Ijc Model - 8-1 (8 x filling heads). Serial number - 013368. Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Model - SILVER 16/16 (16 x heads). Serial number - 528. Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Nsdpfx Ajulpmzja Ielc Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until 14/10/2024, can be viewed working until this point.

Condition: used, Year of construction: 1994, We offer this used KETTNER RBS 90-80 M pallet destacker, manufactured in 1994. Two machines are available. Adjustable for different pallet sizes; the first destacker is set by default for 100x120 pallets, and the second for 80x120 pallets. Manufacturer: KETTNER Model: RBS 90-80 M Order number: 944707/02 Year of manufacture: 1994 Nodpfszgv Egex Aa Iolc If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2018, next inspection (TÜV): 11/2026, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SCHMITZ BEVERAGE TRANSPORT TRAILER SPEED CURTAIN ON BOTH SIDES Air suspension axle 3 storage compartments German registration documents LED lights Spare wheel holder Nodpfxjzg Rrhj Aa Ielc etc.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. Njdpsw Tfb Sofx Aa Islc The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: used, mileage: 249,000 km, power: 294 kW (399.73 HP), first registration: 01/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,190 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good value vehicle with a verifiable service history from our company! Nledjyamkbepfx Aa Iec MB ACTROS 2540 COMPLETE UNIT with certified BÖSE swinging wall bodies Rear load securing 2 x BÄR tail lifts 2,500 kg Trailing steered axle Retarder Special Equipment: Lockable compartment above the windscreen, front axle load 8.0 t, driver side airbag, LED ambient lighting (driving and living), Equipment Package: Economy, Equipment Package: Media, brake coupling standard and DuoMatic, interactive multimedia cockpit, air horn, driver assistance system: turning assistant, driver assistance system: roll control assistant, cab with air suspension, vehicle without trailer coupling, vehicle without radiator grille, vehicle without front splash guard, vehicle without rear underrun protection, regulated 150 A alternator, 12-speed gearbox - type: G 211-12, holder for notebook, comfort telephony (Bluetooth) with induction charging cradle, 3-piece fenders, 3-piece fenders without splash guard, cooler box / refrigerator, aluminium rims 9.00x22.5 (ALCOA matt), roof air deflector (latching), 2-cylinder air compressor, reinforced engine brake, steered tag axle 7.5 t, liftable, wheelbase variant 4900 mm, frame overhang 2250 mm, residual heat utilisation, retarder, acoustic reverse warning (external warning signal), tail lift switch, reinforced rear crossmember, fleet management system interface, seat cover/upholstery: co-driver's seat velour, seat cover/upholstery: driver's seat velour, cab seats: co-driver's seat with armrests on both sides, cab seats: driver's seat comfort suspension seat, external sun visor, sun blind side window, driver's door, external stowage flap left, additional 12V / 15A socket in passenger footwell, additional 12V socket, 24V / 25A socket in passenger footwell, 24V socket in right storage compartment, automatic daytime running lights, preparation for central axle trailer coupling, preparation for 4 surround cameras (displayed in dashboard monitor), curtain sleeping cabin, additional thermal insulation Further equipment: EURO 6 emission standard, axle configuration: 6x2, Actros 5, Actros L cab, heated approach/front mirror, trailer brake 2-line, connections left, trailer socket 24V / 15-pin, exhaust end pipe to vehicle centre, Equipment Package: Powertrain 2, exterior mirror camera MirrorCam, 220 Ah battery, batteries arranged side by side, rear axle differential lock, compressed air connection in cab, steel compressed air tank, compressed air unit with condensate monitoring, medium compressed air unit, automatic headlight activation (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), driver assistance system: lane keeping assist, cab: fixed cab entry, cab: interior package chrome, cab: hydraulic tilting device, cab: L StreamSpace, 2.30 m, tunnel 320 mm, LED outline marker lights, suspension: air/air (full air suspension), electric window lifters, vehicle without rear wall window, speed limiter system, urea tank (AdBlue): 60 litres, rear axle with active lubrication, unregulated, rear axle ring gear 440, Body/chassis: chassis, lower comfort bunk, central locking system, fuel tank: 290 litres aluminium, left, electronically regulated power steering pump, multifunction steering wheel, air tr...

Condition: used, mileage: 360,000 km, power: 213 kW (289.60 HP), first registration: 08/2011, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: ABS, electronic stability program (ESP), soot filter, tail-lift, * MAN TGM 22.290 beverage truck * First registered: 08-2011 Nledpfx Aozg Spnoa Ijc * Automatic transmission * Engine brake * Body by Ewes * Tail lift, 2,000 kg capacity * Steerable rear axle * Air suspension * Trailer hitch * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, mileage: 280,585 km, power: 315 kW (428.28 HP), first registration: 06/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: green, gearing type: automatic, emission class: euro6, loading space volume: 39 m³, loading space length: 7,270 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, PS3 system / air conditioning / differential lock / auxiliary heater / reversing camera, lift axle, trailer hitch, Duomatic, BÄR BC 2000kg tail lift, ORTEN TOPLINER special tilting platform body (certified according to VDI 2700ff-)---- Special equipment: Front axle load 8.0 t, audio system: CD radio (Bluetooth), exhaust to the right side, brake connection standard and DuoMatic, compressed air connection in the cab, high-mounted compressed air unit, compressed air horn, cab floor with engine tunnel 170 mm, tinted windshield, 12.7 cm info display with video function, fuel tank: 630 L aluminum, cooler box / refrigerator, air intake on the side of the cab, reinforced engine brake, trailing axle steered, liftable, spare wheel, spare wheel jack on the side, switch for tail lift, seats in the cab: driver's seat comfort suspension seat, sun visor outside, sunblind side windows, driver and passenger door, steel rims 9.00x22.5, 12V socket in the passenger footwell, 12V socket additionally, 24V socket in the passenger footwell additionally, carpet on the engine tunnel, preparation for reversing camera Additional equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 4, trailer brake 2-line, connections on the left, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, cab: width 2.30 m, cab: L StreamSpace, cab: steel-sprung, comfort, suspension: air / air (full air), power windows, generator 100 A, transmission 12-speed - type: G 211-12, urea tank (AdBlue): 60 L, rear axle bevel gear 440, body / superstructure: chassis, comfort lower bunk, comfort central locking system, communication interface, radiator grille, regulated steering pump, 2-stage air compressor, engine 10.7 L - 315 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle single-tired, ramp mirror, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger functional seat, seats in the cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, splash guard front, front axle stabilizer, additional stabilizer, rear axle / trailing axle, storage flap outside left, cab socket 24V, tachograph / EC control unit, door extension for cab, underbody panel aerodynamically shaped, underrun protection front, preparation for CB radio, preparation for toll collection, front axle angled, regulated water pump, permissible total weight 25.00 t, auxiliary heater (water) ----As inspected or offered, without any further services / accessories. Our offer generally does not include a new TÜV (technical inspection) approval. If a new TÜV approval is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising or lettering. Our general terms and conditions of delivery and payment apply. We will assist you with export, preparation of export documents, procurement of license plates, supplier declaration, etc.! The information provided in advertisements, on the internet, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability / warranty for typing and data transmission errors. The listed equipment must be checked separately. We expressly reserve the right to make prior sales, as we also offer this item on other portals. Accessories information without guarantee. Subject to change, prio Nljdpfx Aaezg Elis Iec

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Substructure: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. The substructure is connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed all around. Front wall: Closed with corner supports extending to below the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is mounted in specially shaped profiles at both the top and bottom. The side walls can be easily moved thanks to the roller carriages inside. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a roof tarp on top. Impact protection: Aluminum strip attached on both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including splash guards Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light centered above the rear portal door, as LED Contour marking according to ECR R48, white on the sides and red at the rear, stripe width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bar KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of locking bars on the additional locking bars on the right and left, made of aluminum square tube, for load securing in the longitudinal direction. Interior lighting Nljdpfxjzhdldo Aa Isc 1 LED light bar, centered in the superstructure, including connection to the cab - switch 2-wing rear door Made of aluminum sandwich panels with internal rotary latch locks. The doors have a smooth surface (optimal for labeling). Latch for the row of holes in the outer frame 4 pieces per side, mounted with a tab and stop nut (further ones can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera, connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: excellent (used), functionality: fully functional, mileage: 52,824 km, power: 308 kW (418.76 HP), first registration: 02/2017, fuel type: diesel, empty load weight: 12,130 kg, maximum load weight: 13,870 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 02/2027, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: full service history, tail-lift, Volvo FM 410 / 2x trailer coupling / tilting body / Krone trailer / TÜV valid until 02.2027 • Manufacturer: Volvo • Type: FM 410 • Mileage: 528284 km • First registration: 14.02.2017 • Power: 308 Kw / 418 hp • Transmission: Automatic • Loading platform: Bär BC2500S4U • Body: Ewers tilting body Hurowa Plus PR-L • Suspension: Air / Air • Internal dimensions: • Length: 8 meters • Width: 2.45 meters • Height: 2.10 meters • For beverage transport • Long-distance cab • Rear view camera • Air conditioning • Cruise control • Lane keeping assist • Differential lock • ESP • 2 x trailer coupling • TÜV: Feb. 2027 • Unladen weight: 12130 kg • Payload: 13870 kg • Permissible total weight: 26000 kg • Euro standard: 6 Nlsdpfxjzgwd Ro Aa Ijc _____ ¬¬¬¬¬-_____ Krone Trailer • Manufacturer: Krone • Type: ZZ 20A • First registration: 06.03.2017 • Body: Ewers tilting body Hurowa Plus PR-L • Loading platform: BÄR BC2500 • Internal dimensions: • Length: 7.20 meters • Width: 2.45 meters • Height: 2.10 meters • TÜV: April 2027 • Unladen weight: 5560 kg • Payload: 12440 kg • Permissible total weight: 18000 kg • German vehicle • German documents • Immediately ready for use • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typographical errors not excluded. • Sale subject to our general terms and conditions.

Condition: excellent (used), functionality: fully functional, mileage: 530,082 km, power: 338 kW (459.55 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 12,130 kg, maximum load weight: 13,870 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 09/2026, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: full service history, tail-lift, IVECO Stralis AS260S46/2x LBW/Swivel body/Krone trailer / Valid TÜV until 09.2026 / Tractor unit • Manufacturer: Iveco • Type: Stralis • Mileage: 530,082 km • First registration: 16.08.2016 • Power: 338 kW / 459 hp • Transmission: Automatic • Tail lift: Bär BC2500S4U • Body: Ewers swivel body Hurowa Plus PR-L • Internal dimensions: • Length: 8 meters • Width: 2.45 meters • Height: 2.10 meters • Long-distance cabin • Reversing camera • Air conditioning • Cruise control • Lane keeping assist • Differential lock • ESP • 2 x trailer hitch • TÜV: SEP. 2026 • Unladen weight: 12,130 kg • Payload: 13,870 kg • Permissible total weight: 26,000 kg • Euro: 6 _____ ¬¬¬¬¬-_____ Krone trailer • Manufacturer: Krone • Type: ZZ 20A • First registration: 06.03.2017 • Body: Ewers swivel body Hurowa Plus PR-L • Tail lift: BÄR BC2500 • Internal dimensions: • Length: 7.20 meters • Width: 2.45 meters Nedpfx Aaozgu Nds Ielc • Height: 2.10 meters • TÜV: April 2027 • Unladen weight: 5,560 kg • Payload: 12,440 kg • Permissible total weight: 18,000 kg • German vehicle • German documents • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, mileage: 73,200 km, power: 110 kW (149.56 HP), first registration: 10/2018, fuel type: diesel, empty load weight: 2,630 kg, maximum load weight: 870 kg, overall weight: 3,500 kg, axle configuration: 4x2, brakes: other, color: grey, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 9 m³, loading space length: 2,930 mm, loading space width: 2,120 mm, loading space height: 1,600 mm, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), navigation system, onboard computer, soot filter, traction control, Nissan Cabstar NV400 Beverage Box Truck E6 - Beverage box body - Swivel side panels - Trailer hitch - Manual transmission - Adaptive cruise control - ABS/ASR/ESP Nedpfxoy Rrq Ne Aa Iolc - Twin rear wheels - Air conditioning - EURO 6 - Payload: 870 kg - Tyres: 195/70R15 Very good condition, German vehicle, export price.

Condition: used, mileage: 115,000 km, power: 250 kW (339.91 HP), first registration: 05/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that we have aroused your interest with our offer and can assure you that you will be able to buy a good and inexpensive vehicle with a traceable service history from us! Certified Orten SafeServer structure with 4-row rear load securing AHK MAUL AHK ball LBW 2,000 KG FULL AIR SUSPENSION Rear view camera Automatic AIR CONDITIONING Differential lock Lane keeping assistant Brake assistant Roof polisher Sun visor GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE Nlodpfxezf T Ipo Aa Isc We organize your registration and the export documents / EUR 1 and manufacturer declaration for export. FINANCING If you wish, we will be happy to make you a LEASING-RENTAL PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-TEST / Speedometer test / Installation of OBU device and service by our BRAND WORKSHOP on site TOLL / ROAD TOLLS TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 KM away Frankfurt-Hahn Airport 40 KM away Luxembourg Airport 75 KM away Sale in accordance with our terms and conditions. The information on the Internet is non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for tips and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 323,000 km, power: 290 kW (394.29 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a high-quality and reasonably priced vehicle with a fully documented service history from our company! MB ACTROS 2540 COMPLETE TRUCK with certified BÖSE sliding wall superstructures Rear cargo securing 2 x BÄR tail lifts, 2,500 kg each Trailing steering axle Nlsdpfx Aasxl Nn Ee Iec Retarder Special equipment: Front axle load 8.0 t, driver’s side airbag, work lights, audio system: CD radio comfort (Bluetooth), exhaust outlet downwards right, standard and DuoMatic brake connections, compressed air connection in cab, high-pressure air system, air horn, electrical and lighting for swap-body frames, cab: with air suspension, tinted windshield, vehicle without trailer coupling, info display 12.7 cm with video function, 3-piece mudguard, aluminium fuel tank: 290 L, coolbox/refrigerator, alloy rims 9.00x22.5 (ALCOA matte), roof air deflector (adjustable), 2-cylinder air compressor, reinforced engine brake, steered trailing axle, tire pressure monitoring system, retarder, acoustic reverse warning (external signal), tail lift switch, reinforced rear cross member, fleet management interface, automatic circuit breaker, cab seats: co-driver armrest, cab seats: comfort driver's suspension seat, external sun visor, sun blind side window, driver’s door, 12V socket in passenger footwell, additional 12V socket, 24V/25A socket in passenger footwell, 24V socket in right storage compartment, automatic daytime running lights, preparation for rear-view camera Additional features: Emissions standard EURO 6, axle configuration: 6x2, Actros 4, trailer brake 2-line, connections left, trailer socket 24V / 15-pin, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel compressed air tanks, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keeping Assist, cab width: 2.30 m, cab: L StreamSpace, cab floor with 320 mm engine tunnel, suspension: full air suspension, electric windows, generator 100A, 12-speed gearbox type G 211-12, AdBlue tank 60 L, rear axle crown wheel 440, bodywork/chassis: chassis, lower comfort bunk, comfort central locking, communication interface, radiator grille blind, regulated power steering pump, engine 10.7 L - 290 kW R6 diesel (OM 470), engine compartment encapsulation, single tires on trailing axle, step mirror, residual heat utilization, disc brakes front and rear axle, seat upholstery: fabric, cab seats: co-driver function seat, cab seats: foldable driver backrest, voltage converter 24V/12V 10A, front splash protection, front axle stabilizer, additional stabilizer rear/trailing axle, exterior stowage flap left, 24V socket in cab, tachograph / EC recording device, cab door extension, aerodynamically shaped underbody fairing, front underride protection, CB radio pre-installation, road charge detection prep, cranked front axle, regulated water pump, gross vehicle weight 25.00 t, additional (water) heater GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer’s declaration for export purposes. FINANCING Upon request, we are happy to provide you with a leasing, hire-purchase, or financing offer. SERVICE TÜV inspection / general inspection

Condition: used, mileage: 255,000 km, power: 290 kW (394.29 HP), first registration: 08/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space volume: 85 m³, loading space length: 8,600 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, * Spier sliding curtain body * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * 4 rows of load securing rails * 2,000 kg Bär tail lift * Large fold-out step on the side * Liftable self-steering trailing axle * Reversing camera * Full air suspension * Differential lock * Spoiler * Sun visor * Air conditioning Nlsdpfxszf S Uue Aa Ioc * Adaptive cruise control * Lane keeping assist * Roll stability control * Brake assist * Heated seats * 3-stage retarder (constant throttle) * Automatic transmission * Euro 6 * Cargo area dimensions: 8,600 x 2,480 x 2,200 mm (21 pallets) together with tandem sliding curtain trailer * Manufacturer: Spier * Gross weight: 18,000 kg * Payload: 12,250 kg * First registration: 08/2019 * Cargo area dimensions: 6,950 x 2,480 x 2,200 mm (17 pallets) * 2,000 kg Bär tail lift * SAF axles * Disc brakes ---- Special equipment: Front axle load 8.0 t, driver airbag, exhaust outlet downwards right, 220 Ah battery, standard and DuoMatic brake coupling, compressed air connection in cab, additional air reservoir, raised air unit, air horn, driver assistance system: roll stability control, vehicle without trailer coupling, 12.7 cm info display with video function, 3-piece mudguard, steered trailing axle, liftable, acoustic reversing warning (external warning signal), tail lift switch, reinforced rear crossmember, circuit breaker, cab seats: passenger seat with armrest, cab seats: driver comfort suspension seat, cab seats: folding driver's seat backrest, external sun visor, 12V socket in passenger footwell, additional 24V socket in passenger footwell, preparation for reversing camera, seatbelt warning system Additional features: Emission standard EURO 6, axle configuration: 6x2, trailer brake 2-line, connections on the left, 24V / 15-pin trailer socket, Antos, audio system: radio with USB connection, exterior mirrors electrically adjustable and heated, differential lock rear axle, steel air reservoir, driver assistance system: lane keeping assist, cab width: 2.30 m, cab tilt mechanism hydraulic, cab: M ClassicSpace, cab: steel suspension, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifters, tinted windscreen, 100 A alternator, 12-speed transmission - type: G 211-12, urea tank (AdBlue): 60 l, manual sliding roof (steel), rear axle crown wheel 440, chassis/body: chassis, comfort locking system, fuel tank: 290 l aluminium, unregulated steering pump, front air intake, 2-stage air compressor, engine 10.7 l - 290 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, single tires on trailing axle, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat cover / upholstery: fabric, cab seats: passenger functional seat, front spray protection, front axle stabilizer, additional stabilizer, rear axle / trailing axle, 24V cab socket, tachograph / EC control device, aerodynamically shaped underbody panelling, front underrun protection, toll system preparation, cranked front axle, regulated water pump, permissible total weight 25.00 t

Condition: used, Year of construction: 2018, Used angle head for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F holder with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: Nlodpfxjwkbcns Aa Iec max. drive speed: 8,000 rpm max. output speed: 12,000 rpm Permissible operating temperature: 85°C Unit swivels 360° around drive axis Sound level: 80 dB(A) Weight: 3.257 kg Availability: short-term Storage location: Hochheim

Condition: excellent (used), functionality: fully functional, mileage: 482,223 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 12,130 kg, maximum load weight: 13,870 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 04/2027, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2017, IVECO Stralis AS260S46/2x with liftgate/tilt wall/Krone trailer. /Valid vehicle inspection until 04.2027 • Manufacturer: Iveco • Model: Stralis • Mileage: 482,223 km • First registration: 03.06.2017 • Power: 338 Kw/459 hp • Transmission: Automatic • Liftgate: Bär BC2500S4U • Body: Ewers tilt body Hurowa Plus PR-L • Internal dimensions: • Length: 8 meters • Width: 2.45 meters • Height: 2.10 meters • For beverage transport • Long-distance cab • Reversing camera • Air conditioning • Cruise control • Lane keeping assist • Differential lock • ESP • Valid vehicle inspection: April 2027 • Unladen weight: 12,130 kg • Payload: 13,870 kg • Permissible total weight: 26,000 kg • Euro: 6 _____ ¬¬¬¬¬-_____ Krone trailer Nsdpfxezghquo Aa Ielc • Manufacturer: Krone • Model: ZZ 20A • First registration: 03.06.2017 • Body: Ewers tilt wall body Hurowa Plus PR-L • Liftgate: BÄR BC2500 • Internal dimensions: • Length: 7.20 meters • Width: 2.45 meters • Height: 2.10 meters • Valid vehicle inspection: April 2027 • Unladen weight: 5,560 kg • Payload: 12,440 kg • Permissible total weight: 18,000 kg • German vehicle • German documents • Immediately ready for use • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), Year of construction: 1997, FOR SALE: CNC Vertical Gear Grinding Machine – GLEASON TAG 400 📊 Machine Capabilities (Gleason TAG 400 Specifications) Feature Technical Specification Workpiece Orientation Vertical (Clamped on a rotary table with an upper center) Nsdpfx Aaszdt Igo Ijlc Maximum Workpiece Diameter 400 mm Maximum Tooth Width (Z-axis) 200 mm Admissible Module Range 0.5 to 8.0 mm Programmable Number of Teeth 6 to 600 teeth Maximum Helix Angle ± 45° (for helical gears) Pressure Angle 14.5° to 30° Center Distance (Maximum workpiece length) 200 to 800 mm Maximum Workpiece Weight Approx. 70 to 90 kg Total Machine Weight Approx. 9,000 kg BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT MACHINE TOOLS, ALL TYPES

Condition: used, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2017, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, * 2-in-1 body construction * SafeServer on the left side, curtainsider on the right side * Certified according to VDI 2700 ff and DIN EN 126420 XL * Beverage transport certificate Nsdpfozfc Ufox Aa Ielc * Draught beer transport certificate * Chemical transport certificate * Waste paper transport certificate * Aluminum rims * Roof de-icing system * BPW axles * Lift axle * Air suspension * Disc brakes * Single-row cargo securing system * Aluminum insertion slats on the right * 13 pairs of lashing rings * Rear portal doors * Edscha tarpaulin system