Used Memory Module for sale (5,066)

Condition: good (used), META CLIP shelving units, height 2,000 or 2,500 mm – Workshop racks, storage racks, manual storage, boltless shelving, small parts storage Uprights: * Open or closed side panel * 2,000 or 2,500mm high * 2000x300, 2500x400, 2500x500, 2500x600, 2500x800 mm Shelves (from €8 each): * 1,300 mm x 300 mm x 40 mm * 1,000 mm x 400 mm x 40 mm Nlsdpfx Alevtt Atowsf * 1,000 mm x 500 mm x 40 mm * 1,000 mm x 600 mm x 40 mm * 1,300 mm x 600 mm x 40 mm * 1,300 mm x 800 mm x 40 mm Large quantities available! Delivery from Gemert (NL). Collection is also possible. ----- These are used shelving racks in very good condition. Contact us for a quotation. Emtrade Scheiweg 72 5421XL Gemert

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz Nlodpfxovhctwj Alwof - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter Nsdpfx Asv D Duzolwolf -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.2.5 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H125 mm -Total weight: 19.4 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.3 R1 EW 20° see photos Nljdpfsv D Dw Ajx Alwef -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H115 mm -Total weight: 14.5 kg

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm Nodpfsv Ehbbsx Alwelf gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: new, Year of construction: 2025, Sealing module to be added behind "large FILLINGmachines". To close large PE-bags with a hot seal seam. Inclusive 700mm roller belt. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nsdpfxjv Nm Ete Alwjlf

Condition: excellent (used), Bosch DM 4K 7101-D, servo module Amplifier module 1070079646-208 Item condition: Used, in perfect condition Nlsdpek Szy Uofx Alwjf Shelf(2)B-7_EK(BOR) Financing through our bank is also possible. komplett-konzept.leasingo.de More modules- new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Rexroth Bosch MA4/200-7301-M control unit 1070079888 GA1 robot controller modul Item condition: Used, in perfect condition R14A1_PD(BOR) More controllers - new and used - you can find in our store! Nledpfx Alok Uumfewjf International shipping costs on request!

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module Version: C SN:V01110794, the item has been checked and tested! ,used, normal signs of use, 100% functional, scope of delivery as per photos Njdpfxomvknpo Alwjlf

Condition: ready for operation (used), Fanuc A06B-6077-H111 Power Supply Module Version: B SN: EA8829973 , the article was checked and tested! ,used, normal traces of use, 100% functional, scope of delivery according to photos Nledpfx Aonkqy Eelwef

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Nedpfx Alorualpswolf Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device Nlsdstndpzepfx Alwjf - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz -Output: 3 AC 7.7 A. -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm Nlodpfx Aljfivi Uswjf -Weight: 4.6 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-5UA0 -Input: 3 AC 380 - 480 V 4.8 A 50/60 Hz -Output: 3 AC 4.1 A -Power: 1.5 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm Njdpfx Aljfivkbewslf -Weight: 2.4 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-1UA0 -Input: 3 AC 380 - 480 V 3.8 A 50/60 Hz -Output: 3 AC 3.1 A -Power: 1.1 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg Nlsdpfx Aljfivkcowef

Condition: good (used), Grote Modular slicer Model: SNP412 Serial: 1117803 Stainless frame, up to 120 strokes per min, product size 101.6mm x 300mm, slice thickness up to 9.52mm, mobile, 1Ph Nljdpfsfv Sqlox Alwof

Condition: ready for operation (used), Fanuc A06B-6079-H204 Servo Amplifier Module SN:480021, used, normal signs of use, 100% functional, scope of delivery as per photos Nljdotvctmspfx Alwsf

Condition: like new (used), Max planing width: 220 mm Max planing height: 120 mm Spindle diameter: 40 Number of spindles: 4 Order of spindles: bottom 4 kW right 3 kW Nledpfx Ajtqwkxslwsf left 3 kW top 4 kW Working table lubrication pump Electric lifting of the body Power supply: 400 V

Condition: like new (used), SIMODRIVE 611 Power module, 1-axis, 50A internal heat dissipation Rated motor currents: Feed=18A main spindle=24A Nljdpfx Alernklnowef Was stored as a spare part

Year of construction: 2021, condition: new, ebmpapst EC-centrifugal module, backward-curved, single-intake, with support bracket Type: K3G250-PR04-H2 Motor: M3G084-DF Phase: 1~ Nominal voltage: 230 VAC Nominal voltage range: 200 .. 277 VAC Frequency: 50/60 Hz Method of obtaining data ml Speed: 3080 min-1 Power consumption: 500 W Current draw: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new and in priginal packaging with 18 pieces per pallet of the production year 10/2021. There are several pallets available. Incl. packaging ex works 53567 Buchholz (Westerwald), Germany. Nlodsi D Ei Aepfx Alwef We will gladly organise freight. Please enquire about freight costs, stating the destination.

Condition: ready for operation (used), AGIE PMO-02 A2 power module, output 614030.5, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nodpfei D Txfsx Alwelf

Condition: ready for operation (used), Agie Power module, output PMO-01 B 613.930.7, used, minor signs of wear, 100% functional. Nlodpfx Alsi D Txuewjf

Condition: ready for operation (used), Siemens 6FC5112-0CA01-0AA0 Sinumerik Interface Module E, version C, used, 100% functional. Nljdpfx Alji Edyhswof

Condition: used, Servo Amplifier Module, CNC Control System, plug-in card, Nodpfx Asdryd Dslwelf -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6058-H334 -Dimensions: 450/250/H180 mm -Weight: 9.6 kg

Condition: used, PLC control, control module, measuring system -Manufacturer: Siemens Nlodpsdkpa Usfx Alwef -Type: Simodrive 6SN1118-0DG23-0AA0 1- axis for digital drive -Dimensions: 300/120/H45 mm -Weight: 0.6 kg