Used Mit T - Nuten Clamping Disk 28040 for sale (78,039)

Condition: used, empty load weight: 7,540 kg, maximum load weight: 14,460 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2001, loading space length: 10,450 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, aluminum rims, 1-axle, BPW axles, air suspension, forced steering, lashing eyes, supports, crane behind house, emergency stop, foldable, 2-point support hydr., 3xhydr. extensions, 1xmech. extension Superstructure: Crane Ferrari 7m/t, Honda GX 630 separate engine for crane hydraulics, crane, 2,66m=2,35t, 11,29m=0,47t crane: 2.66m=2.35t, 4.19m=1.545t, 5.89m=1.015t, 7.69m=0.73t, 9.49m=05.7t, 11.29m=0.47t, (mechanically possible at extra charge 13.25m=0.34t), drum brakes, center and corner stanchions can be folded down, 2.000 crane hours, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Laodpfji Rq I Nsx Am Nja

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circumferential water channel - 3 pieces T - grooves M 16 L 900 mm Lodpfxehii R Ds Am Njaa - lateral flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Condition: new, machine/vehicle number: dc46d2e1cd272305b99fb3160, empty load weight: 9,800 kg, maximum load weight: 31,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Vehicle consisting of: Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Quarter-shell mudguards in front of and behind axle unit 1st pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, slanted towards the entrance. Length at bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in main beam area 260 mm higher than wheel recess. 2nd pair of wheel recesses between A and B axle. Bottom length approx. 350 mm, depth approx. 260 mm. Note! Frame in main carrier area 260 mm higher than wheel recess. If wheel loaders are to be driven and the overall height is to be checked, we request a technical data sheet for the wheel loader types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses are required by the customer). Wheel recess cover can be pulled out from the main frame, with wooden inserts. Widenings extendable to 3,000 mm (not in the rear slope and not in the wheel recesses below) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes Lasdpji Ri Hcjfx Am Nja 2 pairs of ring lashing eyes, 5 tons each at the front on the gooseneck 11 pairs of lashing rings at the top and sides, each 10 tons, embedded in the outer frame 2 x on gooseneck9 x in low loader bed distributed first lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets 5 to. Ring lashing eyes embedded in the floor Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 x LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel / checker plate covering Storage box embedded in drive-over slope to gooseneck Then with 70 mm softwood floor, in the wheel recesses underneath and in the wheel

Condition: good (used), N2 Clamping Squares made of G25 cast iron with a lamellar structure. Lasdpfxotyyl Es Am Nsa With a vertical plane, machined either with T-slots or zero point, orthogonal to the support base according to DIN 875 standard, DIMENSIONS 1595x1000x850mm milled to DIN 876/II, with T-slots 22H12 DIN 650 at a pitch of 175mm

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm Lodpfx Aoy D Stksm Noaa - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, empty load weight: 4,550 kg, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 6,540 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: beige, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 10 pairs of lashing eyes, loading height approx. 900 mm, , customer vehicle, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lodpfoy Etlqsx Am Noaa

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ljdpjy Etl Rofx Am Neaa

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Ljdpfx Asy Drhzem Neaa Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. Lodpfxey Drfyo Am Neaa With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY Laodpfsyktv Sjx Am Nja - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug Lsdpfx Amex Ta Nxe Neaa 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible Lasdpfx Amjyktrto Noa TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min Lodpeykub Aefx Am Noaa F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, next inspection (TÜV): 05/2026, loading space length: 7,600 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, MÜLLER MITTELTAL T 3 Profi 3 x 10,000 kg axles Steel suspension Laedpfxsy Dkpds Am Nsa ABS Extendable to 3,000 mm Spring ramps, 2,600 mm long Loading area 7,600 mm Stake pockets Lashing rings German registration 1 owner Duomatic coupling Beacon Extension boards Tyres approx. 50% etc....

Condition: used, maximum load weight: 11,410 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2017, loading space length: 7,441 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 46 m³, Year of construction: 2017, Equipment: ABS, tail-lift, * 2-axle tandem refrigerated box trailer, 7.40 m, with 2 t tail lift * SCHMITZ Cargobull with front roller shutter + through-load capability * THERMOKING UT-1200 (diesel engine) and stationary cooling 380 V ELECTRIC * Diesel engine approx. 1,513 operating hours * Vehicle no. for customer inquiries: 4003 * EBS (Electronic Braking System) * Tail lift * Air suspension * Anti-lock Braking System (ABS) * Full service history * Roller shutter at front end * Through-load capability * Disc brakes * New roadworthiness (HU) and emissions (AU) inspection! No liability for typographical or printing errors. Sale to business customers only. Errors and prior sale reserved. Changes, prior sale, and errors are expressly reserved. This description is for vehicle identification only and is not a warranty in the legal sense. The description in the purchase contract is definitive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING–FINANCING–HIRE PURCHASE offer Warranty insurance available on request from the insurer * TÜV / UVV for tail lift / tachograph test and installation of OBU device available through our local partners * Export license plates available for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * Ledpfx Ajufffrem Noaa ---- Visit our website at * constantly over 200 vehicles in stock

Condition: like new (used), functionality: unexamined, roll diameter: 50 mm, roll width: 930 mm, roll pitch: 70 mm, total width: 1,000 mm, total height: 900 mm, total length: 15,000 mm, conveying length: 15,000 mm, construction height: 900 mm, machine base height: 200 mm, roll spacing: 90 mm, axle spacing: 90 mm, overall weight: 3,500 kg, working width: 1,000 mm, segment length: 3,000 mm, load capacity: 100 kg, Lippert roller conveyor with drive Unused 1x 6 m Lsdpfxexu Nggj Am Nsaa 1x 9 m Lenze gear motor 7 supports With control for forward and reverse, including emergency stop 16A plug

Condition: used, maximum load weight: 11,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2021, loading space length: 7,800 mm, loading space width: 2,500 mm, loading space height: 2,290 mm, loading space volume: 45 m³, Year of construction: 2021, Equipment: ABS, tail-lift, 2-axle refrigerated box trailer 7.70 m with swing doors + BÄR tail lift 2 t * CARRIER VECTOR 1550 (diesel engine) and stationary cooling 380 V electric * Vehicle number for customer inquiries: 4396 * EBS * Air suspension * Tail lift * Anti-lock braking system (ABS) * Full service history Lajdpfxjw S Ru Ie Am Nja * Temperature recorder * ALCOA alloy wheels * Disc brakes * New general inspection (HU/AU)! No liability for printing or typing errors Sale to trade customers only Subject to prior sale and errors. Amendments, prior sale and errors expressly reserved. The description is for vehicle identification purposes only and does not constitute a guarantee in accordance with sales law. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to provide a LEASING-FINANCE-RENTAL PURCHASE offer Guarantee insurance available on request from the insurer * TÜV / UVV LBW / tachograph inspection and installation of OBU device by our local partners * Export license plates for 30 days All export documents can be provided by request * Toll for Toll-Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website at * always over 200 vehicles in stock

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Lasdpfswauaxex Am Nsa

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Completely overhauled, stock item, 12-month warranty, no solvent furnace! - Max. temperature 250 °C - Total steam chamber 20.5 m³ - Usable dimensions (LxWxH) 2300 x 2750 x 2200 mm - Jumo Imago 500 controller - Heating capacity 36 kW Lodpfx Amsttbf Ue Njaa - Max. loading capacity of the furnace car: 6000 kg, electrically driven - Electric supply and exhaust air dampers by Belimo - Exhaust fan controlled via frequency inverter - Installation dimensions (LxWxH): 3000 x 3000 x 3125 mm plus track in front of the furnace - Own weight approx. 3500 kg - Free-standing control cabinet - Documentation - Electrically tested and supplied with current DGUV test protocol Inspection in our warehouse by arrangement. Car bottom furnace, oven, industrial furnace, convection furnace, chamber convection oven, tempering furnace, heat treatment furnace, drying oven, tempering oven, chamber furnace, drying cabinet,

Condition: used, We are offering used lockers for sale. TECHNICAL DATA Width: 1,200 mm Height: 1,800 mm Depth: 500 mm Colour: Light grey Condition: Used PRICE €70.00 net €83.30 gross incl. VAT TIERED PRICING (unit prices) 1 - 5 units: €70.00 net 6 - 10 units: €66.50 net 11 - 25 units: €63.00 net from 26 units: €59.50 net Available quantity: 105 units YOUR CONTACTS AT DLK: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. Collection is possible for this item. Delivery or shipping can be arranged at additional cost. The extra charges depend on the delivery location and volume of the shipment and can be provided upon request. PROJECT PLANNING Laedpfxjy Eqc De Am Nja Our sales team is happy to provide you with a non-binding, customised quote tailored to your requirements. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, For sale: ALU plates with certification from surplus stock and residual inventory. * - Description: ALU / AlMg4.5Mn (5083) with certificate -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 60 mm - Weight per plate: 911 kg - Purchase price per plate: €5,374.90 | €5.90/kg - * - Sale price per plate: €2,687 / negotiable - * -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 70 mm - Weight per plate: 1,063 kg - Purchase price per plate: €6,271.70 | €5.90/kg - * - Sale price per plate: €2,687 / negotiable - * * Prices are net, VAT excluded * The material comes from surplus stock and residual inventory and is also sold individually. * IMPORTANT: Please note that, for logistical reasons, we are currently only selling within Europe. This means that all purchases and transactions are limited to customers within this geographical region. * Lodow Skr Tspfx Am Nsaa “The seller excludes any warranty for the purchased goods. The goods are sold as is, with no guarantee of suitability for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller accepts no liability for damages resulting from the use of the goods. Any claims by the buyer against the seller are excluded.” * Status: 14.04.2026 * I am happy to answer any questions or provide further information at any time.

Condition: used, empty load weight: 3,680 kg, maximum load weight: 10,720 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 11/2021, loading space length: 5,000 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R19,5 156J, color: other, gearing type: other, front tire size: 385/55R19,5 156J, rear tire size: 385/55R19,5 156J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, AS NEW, wide tyres, TIPPER BODY GALVANIZED, 12 lashing eyes, 600 mm side walls, surcharge for ramps 1,000 €, -- Subject to printing errors, mistakes and changes, sample images --, More data at: !, More details: ! Ljdsyy Uwqspfx Am Njaa

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ledpfeyy I U Nox Am Noaa

Condition: used, empty load weight: 3,320 kg, maximum load weight: 10,180 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 12/2003, next inspection (TÜV): 09/2026, loading space length: 5,040 mm, suspension: steel, tire size: 285/70R19,5 148/145J, color: other, gearing type: other, front tire size: 285/70R19,5 148/145J, rear tire size: 285/70R19,5 148/145J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, Surcharge for ramps: €800; -- Subject to printing errors, mistakes, and changes, Sample images --, More data at: !, More Details: ! Lsdpfoyy I S Iox Am Nsaa

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) Laodpfxeh R Taqo Am Nsa - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.