Used Modular Shelf for sale (2,350)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg Ndjdpfx Agemhh Dtjrob - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Food shelf, kitchen shelf, catering shelf Nsdpfx Ajb A I Nqogrodb -Dimensions: 1060/650/H1760 mm -Shelf spacing: 370 mm -Material: Aluminum -Weight: 42 kg

Condition: good (used), Food shelf, kitchen shelf, catering shelf, baking tray shelf -Dimensions: 790/540/H1430 mm -Shelf spacing: 220 mm -Intermediate dimension: 330 mm Nodpfx Agsb A I Nveredb -Material: Stainless steel -Weight: 45 kg

Condition: good (used), Solar Fence | Mobile Solar Frame, Used Total length: approx. 3,530 mm Total height: approx. 1,700 mm Modular system: The frame can be individually configured and adapted to the size of your solar modules and can be extended at any time with additional elements. Consisting of EACH: 04 x A - Shelf upright, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal braces, Foot plates (182x147x6 mm) The uprights are pre-assembled (bolted framework) 1,510 mm high 610|200 mm deep 08 x Solid rubber heavy-duty roller, used Design: Double-stop swivel roller Roller Ø: approx. 160 mm Roller width: approx. 40 mm Roller material: Solid rubber Plate dimensions: approx. 135 x 110 mm (W x D) Hole Ø: approx. 11 mm 08 x Pallet racking beams, used Shelf system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO 089|2 Agraffe: 5 HK 1,140 mm clear width Nedpjznxf Sjfx Agredb 16 x Locking pin Dexion, used Type: Speedlock P90 Material color: sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Spacer sleeves made of plastic M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: sendzimir galvanized 01 x Screw material Upon request, you will receive a complete, coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo Micro Inverter 800 Watt incl. Wifi, incl. 5 m AC Connection cable, new Growatt Battery Noah 2000 Watt incl. Wifi (Stackable up to 8 KW), new Solar Module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic Cable 2 x 3 m 6 sq mm Red/black incl. MC4 connector, new We will gladly arrange the contact for you. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, mileage: 2 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space volume: 36 m³, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation LOOKING FOR A RELIABLE 6x6 TRANSPORT SOLUTION? If your operations take you beyond paved roads, you need a reliable 6x6 truck that keeps performing where conventional transport vehicles stop. The Mercedes-Benz Arocs 3340A 6x6 has been developed for demanding logistics, remote operations and heavy-duty off-road transport where reliability, flexibility and all-terrain capability are essential. AT A GLANCE ✔ Factory-New Mercedes-Benz Arocs 3340A ✔ Permanent 6x6 All-Wheel Drive ✔ Mercedes-Benz OM460 EURO-3 Engine ✔ 394 HP | 1,900 Nm Torque ✔ Mercedes PowerShift 3 Automatic ✔ Multi-Purpose Cargo Body ✔ ISO 20 ft Container Twist Locks ✔ Folding Side Panels ✔ Heavy-Duty Off-Road Chassis ✔ Ready for Immediate Worldwide Export Why This 6x6 Truck Configuration? Projects change, transport requirements change, your heavy-duty truck should be able to adapt! This versatile cargo platform has been designed to transport equipment, palletised goods, containerised cargo and organised work teams using one robust 6x6 transport vehicle. The modular cargo body with removable side panels, foldable seating, integrated tie-down points and ISO container twist locks offers exceptional flexibility for companies operating in remote environments. Ready For Challenging Off-Road Environments From mining projects and construction sites to energy developments and infrastructure works, demanding environments require dependable heavy-duty transport equipment. The permanent 6x6 drivetrain, reinforced suspension, planetary rear axles and off-road driving programme provide outstanding traction on sand, mud, gravel and uneven terrain. A factory-installed cooling package for hot climates, construction-site air filtration and additional dust protection help maintain reliable performance in harsh operating conditions. Why Buy from Schaften Automotive? Since 1977, Schaften Automotive has specialised in supplying premium commercial vehicles and heavy-duty trucks from leading European manufacturers. With more than 150 vehicles in stock, we offer immediate availability for customers worldwide. From export documentation and international truck transport to custom-built vehicle bodies assembled according to Dutch quality standards, our experienced in-house team manages the complete process—providing one reliable partner from purchase to delivery. Built Around Productivity Reliable heavy-duty transport is about more than engine power. It is about keeping people, equipment and materials moving safely and efficiently every day. The Mercedes-Benz Arocs 3340A 6x6 combines proven German truck engineering with a versatile cargo platform, allowing operators to adapt quickly to changing project requirements while minimising downtime. Perfect For Mining Operations Infrastructure Projects Construction Companies Utility Contractors Oil & Gas Support Humanitarian Organisations Remote Workforce Logistics Equipment Transport Container Transport Site Support Operations Technical Overview Vehicle: Mercedes-Benz Arocs 3340A 6x6 Ndodpfx Ajy R Ud Esgreb Engine: Mercedes-Benz OM460 12.8L EURO-3 Power: 394 HP and 1,900...

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities Nedpfxjzqtkzo Agredb - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Advanced Hygiene & Ultra-Clean Standards - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station * Station 7: Expiration date print station * Station 8: Integrated gripper

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) Nodpfx Aega Nh Hegrjdb 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: good (used), Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, box trolley, tray trolley, embroidery trolley -Transport vehicle: Box van Nsdoz Ahqgjpfx Agrjdb -Case capacity: 220 liters -Chassis: 2 fixed casters, 2 swivel casters with brakes -Number: 7 cars available -Price: per piece -Overall dimensions: 1250/575/H700 mm -Weight: 46 kg/unit

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Ndodozdrufspfx Agreb

Condition: used, mileage: 125,038 km, power: 70 kW (95.17 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi is a used panel van featuring a box body with a continuous, shelf-equipped cargo area. This model was first registered in 2011, has a mileage of 125,038 km, and runs on diesel fuel. With its Euro 5 emissions standard, the vehicle is environmentally friendly and comes with a green emissions sticker. The Sprinter is powered by a 4-cylinder diesel engine with a displacement of 2,143 cc, delivering 95 hp, combined with an automatic transmission. The transporter has seating for two occupants. Its eye-catching metallic yellow paintwork ensures a striking appearance along with practical functionality. Fuel consumption figures are moderate, with a combined consumption of 9.8 l/100 km and CO2 emissions of 259 g/km. The vehicle dimensions are 2,694 mm in height, 2,100 mm in width, and 7,057 mm in length, enabling a spacious interior suited for various transport purposes. With a permissible gross weight of 3,500 kg, it is also suitable for heavier loads. A particular highlight is the built-in camera, providing enhanced safety during operation. Sale exclusively to trade customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted. Ndedpfow U E Alex Agrsb

Condition: used, total length: 7,320 mm, • Vordere Pendelachse • Stabilität auf jedem Bodentyp Ndjdpfxey Abg Rj Agreb • Zwei Fahrgeschwindigkeiten • 2 lenkbare Räder • 4 Antriebsräder • Drehbereich 360° (endlos) • Integrierte Spezialantriebsachse • Modulares Design mit Teilekompatibilität in gesamter Baureihe • Proportionalsteuerungen • Lenkung über Joystickwippe • Rundumleuchte • Non-Marking-Reifen • Hupe • Betriebsstundenzähler • Satz für Extrembedingungen • Notstromversorgung mit 12 V DC BATTERIE • TIANNENG - Blei-Säure-Batterie • Batteriekapazität: 48 V/320 Ah • Ladegerät: 48 VDC/60 A • Einphasig 220 V • Ladezeit von 0 auf 100 % (h)*: 5 • Reichweitenverlängerer (Range Extender): Kubota Z482/9,8 kW ARBEITSKORB • Selbstnivellierung • Drehend +/-90° • Steckdose Schuko 16 A/250 V SICHERHEIT • Fahrantrieb-Aktivierungssystem • Plattform-Lasterfassungssystem Arbeitsbühne • Borddiagnose • Notabsenkung • Neigungskontrolle mit Warnmeldung

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, tail-lift, trailer coupling, From our range of new vehicles, we offer: All-wheel drive Equipment Transport Vehicle GW-L on off-road capable MAN TGM 18.320 chassis Our robust powerhouse for heavy loads. Its superior off-road capabilities ensure reliable performance even in tough conditions. Suitable for operations such as severe weather response, setting up water supplies, as a modular rescue or equipment vehicle—also available with winch—or as an auxiliary tanker (TLF) with water tanks. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission • Super single tires, matched track width, for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Cab with auxiliary heater Body: • High-quality bodywork made from rust- and corrosion-resistant materials • Two spacious side equipment compartments • Fold-out steps for each lateral equipment compartment • Customizable stainless steel equipment racks tailored to your requirements Tail Lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Two-button foot control • Dual roll-off protection • LED platform lighting Safety and Lighting: • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the body and additional floodlights • Pneumatic LED light mast with remote control We would be pleased to provide a detailed quote and present the vehicle to you at our location in Berlin. Nedpfx Agoxyud Ujrodb All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This ad does not constitute a binding offer, but is for informational purposes only. Subject to prior sale!

Condition: new, functionality: fully functional, power: 213.29 kW (289.99 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, tail-lift, trailer coupling, From our range, we offer you: Equipment Carrier Logistics GW-L2 All-Wheel Drive on Off-Road MAN TGM 13.290 Chassis A vehicle for many tasks. Ideally suited for storm response as well as setting up water supply lines over long distances, even in challenging terrain such as forest and vegetation fires. Serves as a modular replacement for rescue and equipment vehicles, or with water tanks for firefighting water transport. Or... exactly right for your specific needs! Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automatic transmission • Single tires with equal track width for high off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Cab equipped with auxiliary heater Bodywork: • High-quality bodywork made from rust- and corrosion-free materials • Two spacious side equipment compartments • Fold-out steps at each side compartment • Individually customized stainless-steel equipment storage solutions Tail Lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Platform dimensions 1810 mm x 2520 mm (height/length x width) • Two-button foot control • Dual roll-off safety locks • LED platform lights Safety and Lighting • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rearview camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the superstructure and auxiliary headlights • Pneumatic LED light mast with remote control We would be pleased to provide you with a detailed quotation and present the vehicle to you at our Berlin location. Ndedpfjxqlmusx Agreb All information is given to the best of our knowledge and belief, but without guarantee of completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 956, Equipment: CE marking, BRAND NEW ON PALLET - NEVER ASSEMBLED Hänel Rotomatic 956 Lean Lift Year of manufacture 2022 Device dimensions: H 7800mm approx. W 3420 mm D 1670 mm 35 No. Shelves up to 200kg per Shelf Total load: 15995kg Njdjw Swnnspfx Agrsdb

Condition: used, -M4 Soleo -Manufacture date: 11/2017 -Dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm Ndodpfxewxwbpo Agrsb -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg

Condition: excellent (used), -M4 Soleo -Overall dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 Ndodpfxewxx Nne Agrob -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg -Year of manufacture: 11/2017

Condition: excellent (used), -Delivered with proofer with heating -Three-chamber modular oven - NP:7367169 Nodpswx I Uyjfx Agrjdb - Type: E-20 - Model: ST-02 - Internal dimensions (WxD): 1217x669 mm / deck - External dimensions (WxD): 1717x1073x315 mm / deck - Capacity: 3x (600x400 mm) / deck - Baking surface: 0.82 m² - Voltage: 3x 230/400 V / 21.6/11.7 A / 3 Ph - Power: 3x 7.8 kW- 50/60 Hz - Weight: 3x 168 kg - Serial Number: 175.832 - Year of manufacture: 29-03-06 - Not equipped with steam -Proofer with heating - Type: E-02 + humidity - Model: ST-02 - Power: 1 kW - 50/60Hz - Voltage: 230V / 5A / 1Ph. - Serial number: 174.091 - Date of manufacture: 23/09/05 - Heated proofer with stand, 6 guides for trays or dough tubs 600x400 mm The listing was translated automatically. Translation errors are possible.

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: TP109, Used Capping Machine AVE 6T up to 7000 bph Ndsdpfx Agovgvaborjb The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this format for its reliability. Additionally, the machine rotates clockwise, aligning with standard bottling line layouts and reducing the need for costly modifications. Its compact design, moreover, integrates smoothly into existing production environments, even when space is tight.  Safety Features and User-Friendly Maintenance The used capping machine AVE 6T up to 7000 bp enhances safety by incorporating advanced protective features. For instance, these systems shield operators from potential risks, reducing accidents and improving workplace safety. Furthermore, the safety mechanisms allow operators to access and maintain them quickly, ensuring consistent compliance with industry standards. The technical manuals of Stelvin Lux, in addition, offer clear instructions for installation, maintenance, and troubleshooting. These guides, therefore, enable operators to resolve issues efficiently, minimizing downtime and preserving productivity. Additionally, the machine’s modular design allows technicians to replace components quickly, streamlining maintenance tasks and lowering repair costs. Current State and Electrical Requirements The machine for Stelvin Lux currently remains in storage, ready for immediate installation on a new production line. Moreover, it operates at 400 V, with a power requirement of 3 kW and a frequency of 5 Hz. Therefore, users should verify these specifications to confirm compatibility with their existing electrical systems. Furthermore, the machine’s low energy consumption supports production facilities in reducing operational costs without compromising performance. Robust Performance and Durability of Stelvin Lux Thi machine withstands demanding production environments with its durable construction. Notably, its six capping heads ensure consistent quality in every operation, maintaining high production standards. Consequently, businesses rely on this machine to meet ambitious production goals while preserving the integrity of their products. Moreover, its precision and efficiency make it a valuable asset for any bottling operation. Conclusion of teh Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph offers an effective and reliable solution for bottling operations. In particular, it boosts efficiency by combining precise capping heads, strong safety features, and simple maintenance requirements. Additionally, its seamless compatibility with standard production lines and energy-efficient operation provide ...

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. Nsdpszf Hn Aefx Agrodb The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf Nodpfxjz Dv N Do Agrjdb

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 09/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,800 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, tail-lift, Are you looking for a different model, engine, dimensions, or other features? Feel free to contact us. We offer financing and leasing at attractive conditions – also for the Netherlands, Austria, and for new businesses! Vehicle: * Wheelbase: 4100mm * 6-speed manual transmission * Single cab * Twin rear tires * Gross vehicle weight: 7.2 tons * Digital tachograph * Speed limiter 90km/h Interior: * Passenger seat bench with multi-function storage * Roof shelf above the windshield * Luxury driver's seat, sprung, heated * Grab handle on A-pillar * Comfort headrests * Multifunction steering wheel in leather * Seat covers in fabric Safety & Assistance: * ESP * System AEBS + City Brake * Airbag for driver * Predictive emergency braking (MOIS) * Operating and maintenance instructions, electronic * Parking sensors, rear * Lane Keeping Assist Plus (LC) * Eco-Smart function * Additional speed limiter * Safety belt warning signal, front/rear * Driver drowsiness detection (DDAW) * Turning assistant, passenger side (BSIS) * Blind spot radar, rear * Traffic sign recognition (ISA) * Spare wheel with spare wheel storage at the end of the frame Wheels & Technology: * Mirrors, electrically adjustable and heated * Digital radio DAB 7" touch * Apple CarPlay/Android Auto * All-weather tires * AIRPRO air suspension, rear axle * Parking brake, manual, central * Air conditioning with automatic climate control * Heated fuel filter * Auxiliary water heater * Light and rain sensor * Fog lights * Full-LED headlights * Connectivity Box 4G incl. TCO * Adaptive cruise control (ACC) * Preparation for toll system (OBU) * Central locking + remote control * AdBlue tank 20 L and driver's side * Fuel tank 90L integrated * Battery 12V 110 Ah Flatbed with sliding tarp: steel frame * Siebdruckboden (likely a type of floor) * Side aluminum structure with aluminum struts * Sliding tarp on both sides with quick-opening system * In total, 4 Air Line rails in the floor/ceiling * 4 lashing bars * Roof spoiler * Tailgate * One storage box under the body * Rear view camera * Side underrun protection * Wheel arch with mud flaps * Side marker lights Tail lift: * Dhollandia * Load capacity 1500kg * Platform depth 1800mm * Roll-off protection * LED warning light * Remote control with spiral cable * Trailer coupling up to 3.5t trailer load (trailer hitch, 12V 13-pin socket) Additional extras around the body are available at an extra charge. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will be happy to deliver it from our stock. Individual customization possible upon request. Ndjdpjt S Dgpefx Agrjb Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sales are subject to change. Best regards, Pimenta Automobile

Condition: good (used), Approx. 235 picking carts, Wanzl, 2 sizes – used: Price for partial quantities (2 intermediate shelves per cart): Up to 30 pieces: €195.00 (net) / piece Up to 60 pieces: €185.00 (net) / piece Up to 120 pieces: €175.00 (net) / piece Minimum purchase quantity: 10 pieces Njdsz Dwa Rjpfx Agrsdb Price for complete purchase: €35,000.00 (net) incl. loading! This special price is only valid for collection by week 41/2026! Type: KT3 1297 Type: KT3 1713 Manufacturer: Wanzl Type: KT3 1297 Year of manufacture: varying, e.g., 2012 / 2018 Load capacity: 300 kg Load capacity per shelf: 50 kg Most of the carts are 1300 mm long. Some of the wider ones are also 1700 mm long. Approx. 185 pieces are all wide (60 cm deep) Approx. 50 pieces are narrow The equipment with intermediate shelves varies (see photos), on average, there should be at least 1–2 intermediate shelves! Few with a foldable step Condition: good Available: immediately Location: Dortmund area, later storage in Frankenberg / Saxony

Condition: used, Technical details: Ndsdpfjz Dt Taox Agreb welding current: 400 A Length: 590 mm height: 430 mm connection voltage: 400 V open-circuit voltage: 50 V capacity in kVA: 18,5 KvA protection class: IP23S weight of the machine approx.: 47 kg dimensions L x W x H: 0,60 x 0,23 x 0,45 m The Kemppi FastMig KMS 400 is a powerful, industrial-grade MIG/MAG welding power source designed for professional use in workshops, metal fabrication, mechanical engineering, as well as manufacturing and maintenance applications. In combination with a Kemppi FastMig MSF wire feeder, the KMS 400 forms a modular welding system. The MSF wire feed units are microprocessor-controlled, providing precise and reliable control of the wire feed. Depending on the control panel installed, the system supports conventional MIG/MAG welding as well as synergic welding functions. *

Condition: excellent (used), total length: 3,500 mm, total width: 1,300 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport length: 4,350 mm, transport width: 1,600 mm, transport height: 2,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H) Njdpfxjxxpgbo Agrodb

Condition: used, This listing is for 1 of 2 Thermo Scientific Multi Blok heater 2050 1CE The unit is in full working condition and is ready for immediate release. Nedpfxoxv Adue Agredb The Multi Blok Heater is a laboratory heating device used to heat samples in tubes, vials, PCR plates, etc., by conduction via a metal block, rather than using a water bath. “2050” is the model number, while “1CE” (or “1CEQ”) denotes a single‑block, CE‑certified version suited for use with one interchangeable modular block. The device is compact and bench‑top, intended for fixed temperature incubations, sample pre‑heating, enzyme reactions, and other lab protocols where stable heat is required.