Used Mubea Klsh 550 for sale (2,746)

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Bodpfx Adsk Ablpo Asdb Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Bdedpfx Ask Aba Ted Aeb For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Bjdpfxok Aa T He Ad Ajdb Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Bdodpfx Adjk Aa Nbj Ajb Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 98 h, nominal power: 49.28 kW (67.00 HP), machine/vehicle number: 1VR91125KN1004048, Equipment: CE marking, Trench cutter with only 98 operating hours! TECHNICAL DETAILS Milling depth: 120 cm Milling width: 15 cm MACHINE DETAILS Net power: 50 kW Weight (according to type plate): 4,740 kg Tractor Tractor weight: 2,663 kg Tractor length: 320 cm Tractor width: 197 cm Height: 250 cm Max. transport speed: 10 km/h Milling boom Transport length: 207 cm Offset range: 61 cm Bdodpjy Htgqjfx Ad Aeb Own weight without milling chain and boom: 690 kg Deutz diesel engine TD 2.9L Tier IV Final/Stage V Engine output: 67 hp Torque: 235 Nm System pressure: 350 bar Pump output: 117 L/min Operating hours: 98 h EQUIPMENT Side-shiftable milling boom Large idler wheel Standard SHARK - COMBO milling chain CE certificate

Condition: good (used), clearance 88mm diameter of rotation without chuck 1000mm Bsdew Rch Rspfx Ad Aodb with chuck 700mm machine dimensions: l2500mm x w1400mm x h1540 rpm 11.2 / 1000rpm automatic feed on X and Z axis

Condition: good (used), Year of construction: 2012, Control Heidenhain iTNC 530 Working area: 800 mm x 1020 mm x 970 mm (x/y/z) Table diameter: 630 x 630 mm Table load: 700 kg Workpiece diameter - max.: 900 mm Rotary table (A-/B-axis) A-axis: -185 / +45 ° B-axis: 360 ° Bjdpfx Aorx N Tzjd Aedb Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system - Motor spindle: 16,000 rpm Drive power: 25/35 kw Max. Torque: 160/223 Nm Spindle holder: HSK-A63 Tool changer: 120-position - Measuring probe - Kinematics package - Tool length checking device - BLUM laser measuring system Tool monitoring - electric handwheel - Suction - 80 bar IKZ system

Condition: new, Year of construction: 2026, Capacity ~ 15,000 m³/h Motor power 15 kW / 20 HP (optional: 18 kW motor) Filter surface area 57.9 m² Exhaust port diameter 400 mm Voltage 400 V Filter material polyester Filter permeability 3 microns Filter dimensions Ø152 x 1120 mm Number of filters 108 Dimensions (L x W x H) 4147.5 x 1129 x 2480 mm Weight 870 kg Scope of delivery: Polyester filter, 3 microns 5 containers 3 chimneys Filter cleaning using a vibration system with control Bodpfx Aex D Ah Ned Aodb The automatic vibration filter cloth cleaning system allows for continuous monitoring of filter operation during breaks and during operation. The filters used are classified as "G" filtration category, which allows for air purification up to 0.2 mg/m3/h (H2).

Condition: used, Year of construction: 1955, groove width 90 mm drawing length 550 mm Bdjdpfx Aey D A Dyod Aob table surface area 400x300 mm a lot of tools

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE550TRZ500433, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Bdjdpfjxvk Hwjx Ad Aeb Weights Empty weight: 3.886 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 80.8 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage II / Tier II Delivery terms: EXW Water tank volume: 721 l Transport dimensions (LxWxH): 4,773x1,63x2,357 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C15C2S300451, fuel type: diesel, motor manufacturer: Caterpillar C15, General information Field of application: Construction Weights Bjdjx Svhzepfx Ad Ajdb Empty weight: 5.071 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 84.1 Liter / Hour at 75% Load Generator: Caterpillar A2985L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 842 l Transport dimensions (LxWxH): 4,93x1,66x2,32 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Year of construction: 2007, functionality: fully functional, EDGE BANDING MACHINE WITH JOINTING AND COPY MILLING; SEPARATING AGENT APPLICATION, Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Rolls: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed speed: 11 m/min Electrics: 400 V, 50 Hz, 3-ph Equipment: Adjustable infeed fence Centrally adjustable top pressure Central manual chain lubrication Control panel at machine infeed Separating agent application Bsdpfx Adoy Dcipe Aedb Jointing cutter unit: 2 x 2.2 kW 1 x with feed direction and 1 x against feed direction

Condition: good (used), Year of construction: 2001, Wood chip heating system, feed-in with underfeed screw. Was only used during the transitional period. Heating capacity up to 550 kW. New parts such as grate, underfeed trough, and feed screw have been replaced. Dismantling has already been carried out. Location: Passau area, but on the Austrian side. Bodjyhl Dcopfx Ad Ajdb

Condition: ready for operation (used), functionality: fully functional, mileage: 2,800 km, power: 86 kW (116.93 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 7,000 kg, tire size: 500/45-20, tire condition: 99 %, DGUV certified until: 05/2025, Year of construction: 2022, operating hours: 100 h, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, differential lock, hydraulics, For sale: as-new Vermeer 550 vibratory cable plow, year 2022, with Case 860 4T 390 tractor, 86 hp, year 1998, approx. 6.5 t. Up to 120 cm depth, 3 different blades, cable ducts for up to 4 x 50 mm fiber-optic conduits or water pipes. Remote control for the plow. Operating manual. Various wear parts. Ready for immediate use. Bdsdpfx Adjy Ew S Uj Aob

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 783802 Drivetrain Drive: Wheel Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Continental Carrier engine: - Upper engine: - Counterweight: 0 Bsdpfxjtr H Tve Ad Ajdb Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Bedpfx Ajwv Tm Ned Asdb Model: UVA 550 Plus Year of manufacture: 2012 Control unit: Siemens 828D Operating hours: approx. 3,000 Travel (X/Y/Z): 600 x 400 x 500 mm Tool stations: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon wireless probe Chip conveyor Spindle cooler IKZ (internal cooling system) 16426ä

Condition: used, mileage: 603,000 km, power: 353 kW (479.95 HP), first registration: 04/2004, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, loading space length: 6,300 mm, loading space width: 2,450 mm, Year of construction: 2004, Equipment: ABS, crane, parking heater, DAF CF 85.480 Platform 6,30 m + CRANE + JIB + REMOTE CONTROL / 8x4 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2004 ? MILAGE: 603 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION PLATFORM: 630 x 240 cm (L x W) Bsdpfey Eu N Rox Ad Aedb CAPACITY: 11 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 205/360/138 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING CRANE: EFFER 550 H 4/S + 4S + REMOTE CONTROL VIN: XLRAD85XC4E629068 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 19,995 h, load capacity: 1,300 kg, lifting height: 5,500 mm, free lift: 1,895 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,076 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,070 mm, Electric 3-wheel forklift Load center: 500 mm Fork width: 100 mm Fork thickness: 35 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: superelastic Front tire size: 18x7-8 Front tire condition: 60 - 80% Rear tire type: superelastic Rear tire size: 140/55-9 Rear tire condition: 60 - 80% Battery voltage: 48V Bdodjw Hicnspfx Ad Ajb Battery capacity: 500Ah Battery manufacturer: Northbatt Battery year: 2025 Battery condition: New Sideshift, 4th valve, front work lights,

Condition: used, Year of construction: 2010, Bobinindus genset with Deutz engine very low hours Bdsdpfx Adoyznr Rj Aob Power (KVA): 500 Working hours: 51

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. Bsdpfx Adsvmfawj Ajdb It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: new, Year of construction: 2025, machine/vehicle number: 20250320017, fuel type: diesel, motor manufacturer: Perkins 2506C-E1STAG2, General information Field of application: Construction Bsdpfsyzl Atjx Ad Asdb Weights Empty weight: 5.395 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 81 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Transport dimensions (LxWxH): 4,51x1,6x2,35 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2014, operating hours: 7,700 h, Equipment: all wheel drive, JCB 550-80 WM year 2014 7,700 operating hours 4X4 all-wheel drive Lifting capacity: 5 tons Lifting height: 8m Engine: 93KW/127HP Weight: 11,250 kg Bsdpfx Adeytl Ile Ajdb German machine ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/?????/?????..... Roman We will gladly arrange your financing or leasing. EU sale: net price after submission of company documents and VAT number VAT deposit: €2,000 Our services for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich airport or Passau train station

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, empty load weight: 94 kg, input voltage: 230 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 558 C Eco HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 140 bar and 550 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 558 C Eco Power supply (V): 230 Capacity (l/h): 290-550 Pressure (bar): 30-140 Maximum temperature (°C): 80/155 Connected power (kW): 3.2 Fuel tank (l): 16 Fuel consumption (kg/h): 3 Weight (kg): 94 Dimensions (L x W x H) (mm): 940 x 600 x 740 Bdjdsy Efd Sspfx Ad Aob EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make The machine is user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: used, mileage: 149,865 km, power: 118 kW (160.44 HP), first registration: 09/2012, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,330 mm, loading space height: 500 mm, Equipment: ABS, crane, electronic stability program (ESP), Iveco ML 75E16 Meiller three-way tipper with a Palfinger crane. 5 + 6 control circuit for grab control. German vehicle from 1st hand, 3 seater and a payload of 2,470 kg - Meiller 3 side tipper - Palfinger PK 4200 - 2x hydraulic extensions Bedpfoyz H E Aex Ad Aedb - Working height 11 m - 3.40 m ? 990 kg - 4,90 m ? 760 kg - 6,40 m ? 550 kg - 1x mechanical extension - 8,00 m ? 420 kg - 5 + 6 control circuit for grapple control - Radio CD - EURO 6 - Body dimensions - 3,600 length x 2330 width x 500 height - Wheelbase 3,000 mm - Payload 2,470 kg - Financing available through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: used, Year of construction: 1986, functionality: fully functional, heating capacity: 1,500 kW (2,039.43 HP), nominal heat output: 1,500 kW (2,039.43 HP), operating pressure: 6 bar, pressure: 6 bar, Equipment: documentation/manual, hot water, We are offering the following used MAWERA FU 1300 RA heating system, year of construction 1986. Including control cabinet, flue gas cleaning, and induced draught fan. Model: FU 1300 RA Year of manufacture: 1986 Rated thermal output: 1500 kW Permissible operating overpressure: 6 bar Permissible flow temperature: 120°C Price: €3,000 Additionally, we are offering a used MAWERA FU 550 RIA heating system, year of construction 2001. Model: FU 550 RIA Year of manufacture: 2001 Rated thermal output: 550 kW Permissible operating overpressure: 6 bar Bdjdpfxjykmd Ae Ad Aob The FU 550 RIA has already been dismantled. Price: €3,000 We are also offering a push-floor discharge unit including cylinders with double trough screw conveyor and hydraulic power unit. Bunker dimensions: 10x4m Price: €3,000 Furthermore, we offer an Eder pressure maintenance and degassing unit for sale. Fully functional, rubber bladders were replaced a few years ago. Price: €2,000 For dimensions of the system, please refer to the pictures. The system is still partially in operation and can be inspected at any time. Scheduled dismantling date: mid-May 2026. If you have any questions or need further information, please feel free to send us a message or give us a call.