Used Mz Project Lc 4000 for sale (6,098)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Ledpfx Acszp H R Eofeaf Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 2012, 1 used 4-axis horizontal machining center Manufacturer: DMG Type: NHX 4000 Year of construction: 2012 Control: Siemens 840D SL Operate Technical details: X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm Spindle speed: 20 - 12000 rpm Spindle motor: 25/35 kW Torque at the spindle: 86 / 130 Tool holder: SK 40 Number of tool magazine positions: 40 Maximum tool diameter: 70 mm Tool diameter with free adjacent positions: 170 mm Tool length - max.: 450 mm Maximum tool weight: 12 kg Lajdpfezq R Tmox Acfjf Pallet size: 400 x 400 mm Number of pallets: 2 Workpiece diameter - max.: 630 mm Workpiece height - max.: 900 mm Table load: 400 kg Rapid traverse rates x/y/z: 60 m/min Feed rates x/y/z: 60 m/min Internal coolant supply: 70 bar Machine weight approx.: 8.5 t Overall dimensions: 3200 x 4800 x 2900 mm Equipment: Production package with internal coolant supply (IKZ) at 40 bar

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Lsdpfszqucfjx Acfsaf Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: excellent (used), CATALOGUE NUMBER 8019 TECHNICAL DATA - Max. cutting length: 3700mm - Max. cutting height: 1300mm - Max. cutting width: 700mm Laodszddz Sepfx Acfjf - Main saw motor power: 11kW - Clamping beam - Saw blade diameter: 550mm - Work table height: 860mm - Pneumatic clamping - Work table width: 135mm - Dust extraction nozzle diameter: 2x150mm - Overall dimensions (L/W/H): 5600x1500x1900mm - Weight: approximately 3000kg - For trimming boards - Pneumatic clamping - Hydraulic saw guidance - Cutting width adjustable hydraulically - Unpainted - Used saw, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: like new (used), MZ Universal 013 - Year of manufacture: 2023 - Band saw with copying function - 7.5 kW - 400 volts - Laser cutting angle +45°/-45° Ledpfx Acszqgkzjfoaf - New price: €54,000 - Dimensions: 3800 x 2300 x 2470 H - Weight: 2000 kg

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door Lasdpfxjzpzblo Acfjf - Electric handwheel - Technical documentation

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 15 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,870 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork length: 1,150 mm, drive type: Elektro, High-lift stacker Fork width: 180 mm Fork thickness: 70 mm Mast type: Triplex Condition: As new Technical condition: Good Front tyres type: Polyurethane Front tyres size: Tandem load wheels Rear tyres type: Polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery year: 2022 Battery condition: 80 - 100% Lajdpfx Aozrcthjcfef Load backrest, Battery compartment rollers DIN160A Schaltbau battery connector Activation via PIN code

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. Ledpfx Acsd Ih Htsfjaf (Techn.According to the manufacturer - without guarantee!)

Condition: good (used), functionality: fully functional, Amada LC 2012 C1 NT / Punch-Laser Machine, Year of manufacture 2012, Control system: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laodezp D H Djpfx Acfof Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Revolver turret: 46 stations.

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Laedowkaalopfx Acfef

Year of construction: 2023, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Typ / Modell: NF-LC-M 500, Type / Model: NF-LC-M 500 Laser power: 500 watts Spot mode: Multi Water-cooled Max. pulse energy (mJ): 15 Working distance / scan width: 185 – 438 mm / 105 – 300 mm 20 µm rust removal (m²/h): 13.9 Laodpjzq H Uajfx Acfof 20 µm oil contamination removal (m²/h): 15.3 20 µm paint / coating removal (m²/h): 10.5 5 µm galvanized sheet removal (m²/h): 2.0 Removal of surface contaminants (m²/h): 16.2 Automotive paint removal (m²/h): 2.2 Power consumption: 3 kW Voltage / Hz: 230 V / 50 Hz Dimensions (cm L x W x H): 95 x 61 x 103 Weight (kg): 177

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Lasdpfjym D E Aox Acfof Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. Laedoy I Iz Eepfx Acfsf If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 Lsdpfx Aoy Uzhfjcfjaf with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. Laedpfey Uzldox Acfof A video of the process can be shown via WhatsApp!

Condition: excellent (used), All stainless steel Mixer Grinder Ljdewwkk Iopfx Acfoaf Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid In good working order

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Lsdpfx Acszndq Hjfsaf Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: Lsdevwgm Hspfx Acfjaf - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: used, Year of construction: 2021, machine/vehicle number: ET235, Used Sleever labelling machine 4000 BPHTechnical Specifications & Performance DataThe ULISSE 4000 is an automatic sleeving labeling machine engineered by Scaligera for high-quality application of shrink sleeves on cylindrical containers. Built in 2021, this second hand equipment is designed for integration in a used bottling line and industrial packaging environments for beverage production. Its robust AISI 304 stainless steel construction, Omron automation, and precision cutting system ensure repeatable, accurate sleeve placement prior to steam shrink.Manufacturer: ScaligeraModel: ULISSE 4000Year: 2021Formats: 330ml standard, 440ml standard, 500ml standard (CAN)Machine type: Automatic sleeve applicator (Labeling Machine)Installed electrical power (applicator): 3 kWCompressed air consumption (applicator): 80 Nl/minControl system: PLC Omron with 7-inch color touchscreen HMICutting system: 1 rotating-blade cutting head, register-controlledMaterials: AISI 304 stainless steel frame and guards; anodized aluminum and chromed steel componentsIncluded conveyor: Scaligera K325, approx. 7.5 m total length, chain 82.5 mm, inverter-drivenShrink tunnel (included): Scaligera TVP3SE steam tunnel, 3 independent steam sections, 6 injection cells, electronic temperature control, inverter-driven exhaust, installed electrical power: 11 kW, minimum steam pressure: 5 barRotary accumulation table (included): Ø 1200 mm, power: 0.5 kWElectric steam boiler (included): COMETH GEI 54 KW 75, 3 × 25 kW resistors, 380 V 50 Hz, steam output approx. 100 kg/h, stainless steel water tank approx. 80 L, capacity approx. 60 LSafety: CE-compliant interlocked guards and protectionsAdvanced Automation & Control SystemsThe ULISSE 4000 integrates advanced automation to optimize sleeve application accuracy and uptime. The external unwind with mechanical dancer ensures stable film tension. Motorized traction rollers launch the sleeve at high speed, with automatic opening and adjustment. Film length is photoelectrically controlled and synchronized to product presence for precise register cutting. Operators interact through a 7-inch color touchscreen HMI with Omron PLC control, enabling recipe management and quick parameter adjustments.Automatic sleeve advance and register-controlled cuttingMotorized rollers with automatic opening and regulationPhotocells for film length regulation, infeed product absence, and outfeed jam detectionMicrometric adjustment handwheels with counters for repeatable settingsInterlocked safety doors and CE-compliant protectionsProduction Line Integration CapabilitiesThis sleeving machine is supplied with a matched steam shrink solution and conveying to facilitate rapid integration in a used bottling line or standalone industrial packaging cell. T... Lasdpfx Ajy Ef Tmscfof

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 552 h, load capacity: 2,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,650 mm, motor manufacturer: TOYOTA 4Y, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,070 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 X 10 X 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB2500 | GAS | DUPLEX 4000 MM | FREE LIFT | FORK POSITIONER | SIDE SHIFT | OPEN CABIN | READY FOR WORK ✅ FULLY SERVICED MACHINE ✅ WARRANTY INCLUDED 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of creating maintenance costs, this machine is the perfect solution. We offer a reliable and fully prepared COMBILIFT CB2500 multidirectional forklift. The machine has undergone a complete technical inspection, comprehensive servicing, and detailed operational testing. It is ready for immediate deployment in production facilities, warehouses, logistics centers, steel yards, and timber operations. ⭐ KEY BENEFITS ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Brand new super elastic tires ✅ Excellent technical and cosmetic condition ✅ Only 552 operating hours ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to the customer's facility available 🔧 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: COMBILIFT 📌 Model: CB2500 📅 Year of Manufacture: 2017 🏋️ Load Capacity: 2,500 kg ⛽ Engine: TOYOTA Gas 🕒 Operating Hours: Only 552 h ⬆️ Mast Type: Duplex 📏 Lift Height: 4,000 mm ↔️ Fork Positioner Width: 1,400 mm 🔩 Fork Length: 1,070 mm 🚜 Cabin: Open Operator Cabin ⚖️ Service Weight: 6,300 kg 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,500 mm 📏 Lowered Mast Height: 2,650 mm 🛞 TIRES Front: 16 x 7 x 10½ Rear: 22 x 10 x 16 ✅ Tire Condition: 100% New ⚙️ EQUIPMENT ✅ Hydraulic fork positioner ✅ Side shift ✅ Free lift ✅ Open operator cabin ✅ Working lights 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🏗️ Steel mills and steel service centers 🔩 Structural steel manufacturers 📦 Handling pipes, profiles, beams, and long loads 🏢 Indoor and outdoor applications 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and professional warehouse equipment. 🔍 Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. Laodpfx Acszq R Rxofof 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. 🎯 WE PROVIDE ✅ Full pre-sale servicing ✅ Warranty coverage ✅ Professional technical support ✅ Leasing and financing solutions ✅ Transportation arrangements ✅ Export handling and customs documentation ✅ After-sales support 🏆 Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📞 CONTACT FT LOGISTICS Sp. z o.o. 🎥 We can arrange a live online machine demonstration, provide additional photos and videos, and prepare a customized transport quotation directly to your location. FT LOGISTICS 🚜 We Deliver Machines Ready for Work.

Condition: used, Year of construction: 1998, Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Lsdpetp Tv Eofx Acfeaf Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm Lajdpfjzmy Tbex Acfef

Condition: used, mileage: 32,610 km, power: 162 kW (220.26 HP), first registration: 10/1996, fuel type: diesel, empty load weight: 6,360 kg, maximum load weight: 4,140 kg, overall weight: 10,500 kg, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 3,650 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, Equipment: ABS, additional headlights, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 6, ABS (anti-lock braking system), differential lock, work lights, storage box, leaf suspension, low-noise G1, U-protection, roof hatch, environmental badge red Wheelbase: 3650 mm Body: Fire-fighting support vehicle with Ziegler box body, 1250 l extinguishing water tank, 100 l foam compound tank & FP 16/8 pump Sales to tradesmen or export are subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lodovhkfnspfx Acfsaf - .

Condition: used, mileage: 54,009 km, power: 162 kW (220.26 HP), first registration: 04/1998, fuel type: diesel, empty load weight: 6,490 kg, maximum load weight: 4,010 kg, overall weight: 10,500 kg, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 3,650 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, Equipment: ABS, additional headlights, cabin, differential lock, low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 6, ABS (anti-lock braking system), differential lock, work lights, rotating beacon, storage box, leaf suspension, low-noise G1, U-protection, roof hatch, environmental badge red Wheelbase: 3650 mm Body: Fire-fighting support vehicle with Ziegler box body, 1200 l extinguishing water tank, 100 l foam tank & pump 1,200 l water tank, 100 l foam tank, pump approx. 347 operating hours The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lasdpfxevhh T No Acfsf - .

Condition: used, mileage: 69,500 km, power: 162 kW (220.26 HP), first registration: 09/1996, fuel type: diesel, empty load weight: 6,730 kg, maximum load weight: 3,770 kg, overall weight: 10,500 kg, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 3,650 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, Equipment: ABS, additional headlights, cabin, differential lock, low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 6, ABS (anti-lock braking system), differential lock, work lights, rotating beacon, storage box, leaf suspension, low-noise G1, U-protection, roof hatch, environmental badge red Laedpfx Ajvhh Igjcfjf Wheelbase: 3650 mm Body: Fire-fighting support vehicle with Rosenbauer box body, 1200 l extinguishing water tank and 100 l foaming agent tank Sales to tradesmen or export are subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .