Used Nn 710 for sale (2,420)

Condition: new, Rexroth CSB01.1C-PB-ENS-NNN-L1-S-NN-FW Profibus , SN: 7260111073641 , unused in original packaging, 100% functional Isdoi Ecqhopfx Ab Noib

Condition: ready for operation (used), Rexroth MSK101D-0300-NN-S2-AG0-RNNN 3-phase permanent magnet motor MNR: R911320508 SN:MSK101-03323 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Isdpfx Abou T Akbs Njib

Condition: ready for operation (used), Rexroth VCP25.1BVN-003PB-NN-FW Screen Panel MNR.: R911305269, used, minor signs of wear, 100% functional, scope of delivery as per photos Iijdpfx Aoi Ec Azob Neb

Condition: ready for operation (used), Rexroth MSK100C-0200-NN-S1-AG2-NNNN servo motor MNR: R911309667 SN: MSK100-11852,used, good condition, 100% functional, scope of delivery as per photos Iiedpfx Abet Adpxj Neb

Condition: ready for operation (used), Rexroth MSK100D-0200-NN-S1-AG0-NNNN servo motor MNR: R911309668 SN: MSK100-01874, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iijdpfx Abot Adp Ee Nsb

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW IndraDrive Cs MNR: R911344555 SN: 7260405435789, used, normal signs of use, 100% functional, scope of delivery as per photos Iedpforyiqbex Ab Nsib

Condition: ready for operation (used), Rexroth CSH01.1C-SE-EN2-EN2-NNN-NN-S-NN-FW MNR: R911306767 SN:CSH011-21612, used, normal signs of use, 100% functional, scope of delivery as per photos Iijdelcf S Sjpfx Ab Nob

Condition: ready for operation (used), Rexroth MSK060B-0600-NN-M1-UG0-NNN MNR: R911306012 Permanent magnet motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Isdpfx Abei D Nl Ne Njib

Condition: ready for operation (used), Rexroth MSK070C-0300-NN-M2-UG0-RNNN servo motor MNR: R911312321 SN: MSK070-16320, used, good condition, 100% functional, scope of delivery as per photos Iiedpfxou H Snrj Ab Njb

Condition: ready for operation (used), Rexroth CDB01.1C-S3-ENS-ENS-EN2-EN2--S2-S-NN-FW MNR: R911328503, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Ijdji Ecprjpfx Ab Nsib

Condition: ready for operation (used), Rexroth Indramat CSH01.1C-SE-EN2-NNN-NN-S1-S-NN-FW Control Unit , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Ijdpfx Aoi Ecyxjb Nsib

Condition: new, Rexroth MSK100C-0200-NN-M1-AG2-NNNN 3 Phase Synchronous PM motor MNR: R911315800 SN: 7260406032145, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Isdpslx N T Tefx Ab Njib

Condition: new, Rexroth MSK100B-0400-NN-M1-AG1-NNNN 3-Phase Synchronous PM-Motor SN: 7260412334179, unused, 100% functional, scope of delivery as per photos Iiedpjl Acf Iofx Ab Neb

Year of construction: 1971, condition: used, Peiseler Model : 710 Teilung : 24 Baujahr : 1971 Nr. 608 New price : 8700,- Delivery condition Delivery time: from stock , t.v.v. Delivery: ex Baarle-Nassau Payment: for pick-up Prices: are net, exkl. Machinehandel De Leeuw BV cannot be held responsible for differences between the technical data in this offer and the actual machine Machinehandel De Leeuw BV is specialized in used machines and accessories for the machining industry and used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard and automatic storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Visiting address : Oordeelsestraat 7 b , NL-5111 PA Postal address : Postbus 294 , NL-5110 AG Baarle-Nassau / Netherlands Tel: GSM Antoine: B.T.W. nr: NL 801262458B01 IBAN nr. NL 20 RABO 0116605820 BIC / SWIFT code : RABO NL 2 K.v.K. Tilburg 18034279 Website : E-mail : info@ Iiodpfogbd D Rox Ab Nsb

Condition: ready for operation (used), Rexroth MSM019A-0300-NN-M0-CH0 MNR: R911325127 servomotor FD: 17W27 serial number: 3251227-G3220, used, good condition, 100% operational, scope of delivery as per photos Isdex Eubaopfx Ab Neib

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-S4-NN-FW IndraDrive Cs compact frequency converter MNR: R911340084 SN:7260408670599, used, in good condition, 100% functional, scope of delivery as shown in photos. Iiodpfjx Et U Eox Ab Nsb

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe Iisdpfx Asxxm A Heb Neb FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Steadies Live centre

Condition: new, Rexroth MSK060B-0300-NN-M1-UG1-NNNN 3-phase synchronous permanent magnet motor, part no.: R911307216, serial no.: 7260410080512, unused, 100% functional, delivery as shown in photos. Iodpfx Aex Ducxob Nsib

Condition: new, Rexroth CSH02.1B-CC-EC-ET-L3-NN-NN-FW MNR: R911340358 SN7260409845853, unused, 100% fully functional, scope of delivery as shown in the photos. Iiedpfx Abex Dw Sie Njb

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete inventory of vehicles, including units available immediately and at short notice, on our website. Overview of equipment. Full equipment list available on request. Neck (gooseneck): * Hydraulically liftable/lowerable and removable gooseneck, length approx. 3,650 mm * 2 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front bogie: * Hook pick-up front and rear, length: approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Basic width: approx. 2,850 mm * Length: approx. 6,650 mm Iiedpfxexbmplo Ab Nsb * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear bogie: * Mechanical bolt-lug coupling at the front for mounting a lowbed * Rear crossmember bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres: * Front bogie: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear bogie tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel construction is automatically blasted with a blasting wheel system after welding. Second blasting with corundum for optimal adhesion of the coating system * Full chassis HRM-metallized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with two coats of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU sidewalls and rear wall, approx. 400 mm high, anodized version, fitted on the gooseneck * 3.5 inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Support gallows for supply lines, tractor unit tank must be at least 80 l * with MAX Trailer couplings, otherwise customer to supply coupling parts ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air screwdriver * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in facility (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the outer tube of the excavator deck for bolt-on rings (LC 16,000 daN) * Foldable width extensions with steel covers, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * At the rear bogie, a socket for the cable remote control of the steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted left and right on the gooseneck * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Control of the steering, in addition to the cable remote control * One LED work light each left and right at the end plate of the gooseneck with...

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67 Iisdeww Hhvjpfx Ab Neb

Condition: ready for operation (used), Year of construction: 1990, Böcker LH 710 with electro-hydraulic drive Iodpfx Aohh Swksb Njib year of construction 1990 No.3216/2 nominal load 300kg dead weight 255kg lifting height 7100mm Overall height 2200mm

Condition: used, Year of construction: 1995, x-travel 0710 mm y-travel 500 mm z-travel 500 mm table-size 1000 x 600 mm CNC control TNC 407 Heidenhain feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 Isdpfx Aoxukn Ssb Neib turning speed range 20 - 3150 U/min main drive DC 7 kW milling head -swivable +/- 90 ° total power requirement 15 kW weight of the machine ca. 3,9 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with Heidenhain TNC 407 Control.

Condition: excellent (used), Year of construction: 2019, operating hours: 19,200 h, functionality: fully functional, machine/vehicle number: 90514 2019, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with chip divider grinding device and saw blade magazine up to D=560mm for unmanned operation. In manual mode: 40-710mm. Saw blade magazine with 3 mounting arbors. Oil filtration system suitable for HSS and carbide (HM), oil cooler brand Polar 2.9. Tooth profiles for HSS: Form A, B, BW, C, and special profiles. TK saw blades can be ground in diameters from 200-500mm. The fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. Equipped with electrostatic air extraction. Iisdpexuq I Ejfx Ab Nob

Condition: used,