Used Nucleus Industrie-Pc Dp3 Eco Fe11002 for sale (36,717)

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis FPT DINO CNC Gantry Milling Machine was manufactured in 2002. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine is equipped with an electrospindle capable of speeds up to 18,000 RPM and a robust gantry type cast-iron construction. If you are looking to get high-quality milling capabilities, consider the FPT DINO machine we have for sale. Contact us for further details. • Rapid feed rate: 35,000 mm/min • Total installed power: 68.7 kW / 93.4 HP • Power supply: 400 V, 50 Hz, 116.1 A Hjdpfxozbic Ao Achjnr • Machine structure: Gantry type cast-iron construction • Spindle: Electrospindle, 5,000 / 10,000 / 15,000 rpm • Spindle speed: 18,000 rpm • Spindle taper: HSK63 • Tool magazine capacity: 40 positions • Max tool diameter: 70 mm • Max tool length: 300 mm

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Hjdpfx Asy D Hp Tjchenr Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 98 V Hedpey D Hrzjfx Achenr • Excitation current: 454 A • Excitation with rotating diodes (brushless) • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 Hjdpfx Aozb Evlechjnr WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: used, functionality: fully functional, A set of 24 industrial axial fans from an active shipyard operation. The set mainly includes large axial fans with protective grilles (see photo), as well as two blue/black high-performance blowers. Suitable for: - Ventilation of halls/workshops - Drying of components, paint booths, renovation sites - Ventilation of construction sites, tunnels/tanks - Event technology, cooling, emergency ventilation - Shipbuilding / shipyards Preferably sold as a set (entire lot). Individual units can be sold separately by arrangement (approx. 100 EUR per unit). All devices are functional, with minor signs of wear typical for shipyard use. Originates from the shipyard operation of Strela Shiprepair GmbH (Stralsund). Technical data: - Quantity: 24 units - Design: Axial fan with protective grille Hjdpfxjzawhwj Achjnr - Application: Industry / construction / shipbuilding / event technology - Storage: in wire mesh box (included) - Connection: 230 V / 400 V (mixed assortment, check on site) Collection / Transport: Self-collection in Stralsund. Wire mesh box (steel) included on request. Shipping via freight forwarder on pallets by arrangement (several pallets). Total price 2,400 EUR net, negotiable, for all 24 units + wire mesh box; individual sale approx. 100 EUR/unit. Contact: [NAME], Tel. [TELEPHONE], [EMAIL]

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Hnedepxnpaspfx Achjr Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: new, Industrie Bitossi Alubit 90 cylindrical grinding stones Material: high density sintered alumina ceramic Dimensions: 35 x 35 Al 2 O 3 content [mass%]: 90.0 ± 0.5 Hnedsd Szf Eepfx Achsr Bulk density [g / cm 3]: 3.63 ± 0.07 Hardness (Rockwell scale): 78 ± 3 Hardness (Mohs scale): 9 Color: white Quantity: about 1500 kg on stock

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Hnedpjd Tiu Eefx Acher Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop Hjdpfxoyhxl Rs Achjnr

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m Hjdpfxeu Nz Dno Achjnr compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar *

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Hodeyrndmspfx Achsnr Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Hjdpfx Acjuni D Eehsnr Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station Hodpoxpfkksfx Achsnr TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm X-Axis: 16.000mm Y-Axis: 3.500mm Z-Axis: 1.500mm Power on spindle: 80kW Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, spindle speed (max.): 18,000 rpm, spindle nose: hsk 63, number of spindles: 30, Equipment: chip conveyor, documentation/manual, FPT vertical machining center model RAID Travels 1500X1100X600 mm Hedpfx Aex H Iylechsnr 30-position tool changer HSK 63 spindle, 18,000 RPM (overhauled in 2025) CNC HEIDENHAIN iTNC 530 Remote electronic handwheel Chip conveyor

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. Hnodpfsgi Dl Nox Acher other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: excellent (used), For sale: professional screw compressor from renowned German manufacturer BLITZ Model: Monsun Pro Eco 15 – industrial unit with excellent build quality, quiet operation, and high performance. Ideal for workshops, production plants, paint shops, and wherever constant and stable air pressure is required. ⸻ TECHNICAL SPECIFICATIONS: • Manufacturer: Blitz • Model: Monsun Pro Eco 15 • Motor power: 15 kW • Working pressure: 10 bar • Capacity: approx. 2.0 m³/min • Speed: 1500 / 3000 rpm • Year of production: 2011 • Power supply: 400V (3-phase) ⸻ OPERATING HOURS: • approx. 17,954 h ⸻ EQUIPMENT: - Control panel - Sound-insulated enclosure - Installation ready for connection - Compact design ⸻ TECHNICAL CONDITION: Hnodpfx Ajy A Tp Rechjr • Compressor fully functional • Normal signs of wear • Operates correctly ⸻ APPLICATION: • Automotive workshops • Industry • Manufacturing • Paint shops • Service centres

Condition: excellent (used), Microbox Simatic PC 420 6 A G 4040-OAE 10-OA BO S VPTN 00 1726 Hedpfx Acoim H Shohsnr

Year of construction: 2023, condition: like new (used), 4-axis machining center Usefull lenght: 3200 mm Max section profile: 160x 210 mm a-axis: -15°; +195° 4 pneumatic clamps automatic positioning of clamps 2x endstops motor 5kW/20000 RPM : ISO 30 Centralised automatic lubrication system automatic toolchange with 10 positions Hnsdpfx Aey Ec Iujcher ONLY 148 hours

Condition: good (used), Year of construction: 1988, machine/vehicle number: 40 / 670, functionality: unexamined, -KOM 853- Offered here is a Unifil air purifier from ILT Industrie-Luftfiltertechnik GmbH. This unit is in used condition and has not been tested for functionality. Manufacturer: ILT Industrie Luftfiltertechnik GmbH Model: U40 Serial No.: 40 / 670 Year of manufacture: 1988 Voltage: 80 V Current: 3.3 A Frequency: 50 Hz Hodpfxjw Ehzyj Achenr

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Year: 2016 Hsdpfxstq R Saj Achjnr - technically efficient, ready to work - after full service - only 69 hours worked - spindle 2.2 kW - axis movement range: X – 2675 mm, Y – 355 mm, Z – 224 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 6 tools - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows 7 with online access - protective cabin - weight 1400 kg, dimensions: 3600 x 1660 x 1900 mm

Condition: ready for operation (used), functionality: fully functional, empty load weight: 2,580 kg, maximum load weight: 32,000 kg, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 720 mm, loading space volume: 7.5 m³, Year of construction: 2009, Platform transport trolley Brand: Plan Type: 70-4 Dimensions platform: 3000X2500/H720 mm Load capacity: 32000 kg Total dimensions: 5100x2500/H 720 MM Year of construction: 2009 Own weight: 2580kg This trolley is double steered and has double full rubber wheels with metal rims. The triangle is removable and can also be hung on the other side of the trolley. Hnsdswarxxepfx Achor The floor is fitted with a thick iron tear plate.

Condition: like new (used), Year of construction: 2018, operating hours: 5,498 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 3,500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, table length: 2,500 mm, table width: 3,500 mm, spindle speed (max.): 12,000 rpm, table height: 300 mm, table load: 130,000 kg, workpiece weight (max.): 130,000 kg, spindle nose: HSK A100, MOVING GANTRY MILLING MACHINE FPT MOD. DINOX 350 IAT 5 axes Numerical control: Heidenhain TNC 640 X axis: 2,500 mm Z axis (Vertical): 1,300 mm Hnjdpewzv Tcefx Achor Y axis: 3,500 mm Rapid traverse: 40,000 mm/min Universal head with continuous positioning HSK A100 electrospindle interface Maximum speed: 12,000 rpm A axis: + / - 185° C axis: + / - 270° Table: 3,500 x 2,500 mm, height 300 mm Load capacity: 15t/m^2 Tool changer: 64 positions Total power: 85.13 kW Weight: 51,370 kg Complete with: - Laser probe and software for tool integrity check and tool length and radius measurement - Workpiece probing and alignment sensor - External/internal tool coolant with 1,500 l tank, p=40 bar - Workpiece washing gun with tool coolant, dedicated pump - Internal tool cooling with compressed air, High Speed - Chip conveyor USED MACHINE YEAR 2018

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Y=2000mm Z=1000mm Table 2000 x 1800 mm, 12 Ton Hnsdjwdiu Espfx Acher Cooling through spindle. X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Rotary table size 1,800 x 2,000 mm Table load 12 tons C-axes 360,000°

Condition: good (used), Year of construction: 2003, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 900 mm, spindle diameter: 152 mm, FPT MAR-X 3, 2003 CNC SELCA 4045 PLUS DIGITAL, Built 2003, CNC can be changed to Heidenhein 620. FPT TRT25. Rotary Table, 25 Ton. Two axis Head, 144 x 144. Hsdpfxowdm A He Achonr X, Column travel 14.000 mm Y, Headstock vertical travel 4.000 mm Z, Ram stroke 1.500 mm W, Spindle Ø 152,4 mm 900 mm Spindle taper ISO 50 Spindle speed 0 - 2.500 rpm Spindle motor 48 kW Automatic tool changer 40 Tools FPT TRT25. Rotary Table, 360.000° 2.500 x 2.500 mm Rotary Table longitudinal travel 2.000 mm Table load 25 Ton

Condition: used, Used DC motor Anchor 460V // Current 325A field 340V // current 4,7 A Speed 1880rpm Hnsdpfowbhg Usx Achsr Power 138kW