Used Ohaus Orbital Shaker for sale (501)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,050 mm, sheet thickness (max.): 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Folded parts are easily removed thanks to the hydraulically opening head * Very easy to operate with movable control panel * Lower roll positions are easily read via two digital indicators * Welded steel body construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-supported conical bending system * Hydraulic balancing system ensures parallel movement of shafts * Extended shaft ends for mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Upper crane (hoist) for support in large diameter bending * Hydraulic side supports for assistance in large diameter bending * Ground and polished rolls for special applications * Rollers for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement Hedpfx Asw Slg Sjb Nefg TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16/20 mm Bending: 20/22 mm Top & Bottom Roll Diameter: 300 mm Side Roll Diameter: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4100 mm Width: 1500 mm Height: 1550 mm Weight: 7400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 1,550 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easily removable bent parts thanks to a hydraulically opening top roll * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with roller bearings * Hydraulic synchronisation system for parallel movement of shafts * Extended shaft ends to allow mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Specially ground and polished rolls for custom work * Bending rolls for profiles Hsdpfoxbzr Uex Ab Njfg * Infinitely variable hydraulic speed adjustment * Electronic synchronisation system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,550 mm, sheet thickness (max.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Equipped with overload protection * All rolls are driven by hydromotors and planetary gearboxes * Hydraulic opening head allows easy removal of curved parts * Very easy operation with movable control panel * Lower roll positions can be easily read using two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-mounted conical bending system * Hydraulic balancing system provides parallel movement of shafts * Extended shaft ends to allow mounting of profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special operations * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 12/16 mm Bending: 16/18 mm Upper & Lower Rolls: 300 mm Side Rolls: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Hsdpfx Asw Slf Usb Nefg Weight: 8400 kg

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm Hedpfx Ajvxqh Djb Nofg • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Condition: excellent (used), - Manufacturer: Seewer Rondo - Serial no.: COA491106 - Dimensions: 1390 x 630 mm - Model: SSO 62 - Year: 2000 - Material: stainless steel cladding Hfsdpfxewxwl Ue Ab Neg - Condition: used, checked, baker's condition - Digital display with membrane keypad - Manual and automatic functionality - Flour shaker - Side belt can be folded - Mobile with brake -Refurbished equipment: the equipment is prepared upon order; collection and return times are agreed at that time (please request price after refurbishment)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, optical sorter equipped with 2 RGB cameras and 1 IR camera pulse LED technology (red, green, blue) small pitch valves (each air valve ca 0.6 cm) integrated infeed shaker Hsdpfx Asy H Itxjb Njfg machine sorts product on colour, structure and shape used for sorting frozen fruit and vegetables capacity up to 3 t/hour reject belt included easy to operate sorting programmes/settings for various product included very good condition

Condition: ready for operation (used), Various old small machines are available. 1) Lathe Colchester Chipmaster 5x20. 2) Multi-spindle drilling machine Steinel BGS 140. 3) Orbital riveting machine Steinel VS. 4) Hydraulic power unit Sauter HA1202. 5) Laminating machine Sallmetall. 6) Drum pump Flux F 407. 7) Hydraulic power unit Sauter HOV4. An on-site inspection is possible. A package sale is desired. Hodpoy D Tr Ijfx Ab Nsfg

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Hedpoy Dtpmsfx Ab Njfg Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: new, Gyson Orbit 600 , electrically heated and rotary washing machine , NEW, never used new price 73,500 pounds / 88,200 euros Hfjdpfjvlpiyjx Ab Njg incl. certificates full documentation

Condition: good (used), Year of construction: 1991, Shaker with triangular special stones Hfjdpfsn I Rqcox Ab Njg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, warranty duration: 12 months, DGUV certified until: 05/2028, type of input current: three-phase, input frequency: 50 Hz, space requirement height: 924 mm, space requirement length: 732 mm, space requirement width: 832 mm, Baguette - dough divider JAC Diviform - max. 5 kg socket (460 x 387 x 125 mm WxDxH) - Dough division and shaping - Easylock automatic locking of the grid holder - Modular solution thanks to part and form grids - Space saving - Stainless steel version - quickly and efficiently with Easy Clean - versatile - 100 different grids are offered - up to 400 pieces of dough per hour are divided and 3000 formed Connection 400V 1.5 kW, 16A-CEE plug Dimensions: 832 x 732 x 924/1604 mm, WxDxH Hjdohwzknepfx Ab Nefg new machine with 12 months warranty Option: Fullmatic: Automatic cycle Easyflour: flour shaker Diviform: with press lid Visit our large bakery machine park!

Condition: excellent (used), Toyo Jidoki TT9-CW Rare 2 lane pouch filling and sealing machine, for tear top stand up pouches. In excellent condition direct from ultra high care factory. Perfect for packing sauces, dairy products, babyfoods, ready meals etc. Hfjdpfx Asyzi Igjb Neg

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Hodpfjyivr Tox Ab Nefg

Condition: like new (used), Bought new in 2022 and only used for a few months before the factory went Bankrupt. As new condition. 1 year guarantee. Hodpfx Abeyivtqs Nefg

Condition: good (used), Direct from UK factory where it was filling water based solutions into bottles. Single head version also available. Hfodjyzcv Dspfx Ab Neg

Condition: excellent (used), Commonly used for Babyfoods, purées, sauces, cocktails, dysphasic meals, cleaning products etc. Hfsdsyzcvqopfx Ab Neg

Condition: new, Year of construction: 2026, functionality: fully functional, The DC3000 from CORMAK is an advanced sawdust cyclone designed for intensive dust extraction processes in the woodworking, furniture and metalworking industries. Thanks to its state-of-the-art cyclone separator, powerful sawdust fan and double filtration system, the unit ensures effective air cleaning of fine and coarse dust fractions. The sawdust extractor DC3000 is distinguished by its automatic filter shaking - which significantly increases the comfort and efficiency of daily work. Technical parameters Extraction capacity 2000 - 7000 m³/h Fan rotation speed 2800 rpm Suction nozzle diameter 3 x 100 mm / 1 x 200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions 1300 x 1000 x 2200 mm Weight 219 kg Standard equipment Hedpfxjwwtz Ne Ab Njfg Automatic filter shaker Pressure gauge Double filtration system (main and pre-filter) Metal container under the separator Transport wheels

Condition: excellent (used), content of factory set up to produce breakfast cereals such as granola. machinery available includes nut and seed mixing, AC Horn/Telford roasting oven, he could castles, open tumblr, and washer, multi head wire and bagger, Bradman Lake automatic cartoner with automatic loading. Hsdpsyzbktofx Ab Nsfg

Condition: excellent (used), Bought new for a meat free factory in 2021 and only used for minimal hours as factory closed down soon after. All other machinery available to make a complete line. Hjdpfx Aboyzbkge Nefg

Condition: good (used), Laska W130 meat grinder direct from closed UK meat factory. 130mm grinding head. All stainless steel. Hsdoyzbkaspfx Ab Nefg

Condition: good (used), Fatosa Z arm mixer with loader for tote bins. Direct from closed UK meat factory. Hsdpfxeyzbi No Ab Njfg

Condition: excellent (used), Direct from meat free factory. Vacuum filler in good condition. Complete with tote bin loader. Hsdpfoyzax Njx Ab Nofg

Condition: excellent (used), Handtmann VF608 Plus vacuum filler. Bought new in 2019 and has been used for depositing mashed vegetable product. In excellent condition. Hfjdpfovyr Emex Ab Njg

Condition: new, Year of construction: 2025, functionality: fully functional, 5 AXIS Machining Center 2131 X, Y, 2100 X 3100MM MOVEMENT RANGE Z AXIS RANGE 1000 MM FOR 5 AXIS HEAVY MACHINES HITECO 17KW S6 TILTING/ROTATION HEAD KIT AXIS RANGE A= +- 185°, C= +- 320°, ORBITAL K PLUS PX-2 15/12 63F NC HSK63 OMRON AC SERVO DRIVE KIT OSAI OPENKEY INDUSTRIAL REAL TIME CONTROL SYSTEM EUCHNER HBA-103037 MANUAL MANIPULATOR CONTROL CABINET AIR CONDITIONING LINEAR MAGAZINE 18 POSITION 16 POSITION HSK63F TURRET MAGAZINE CORRECTION MAP RENISHAW TS27R TOOL MEASURING PROBE Hfodpfx Asu U Hmpob Neg SKF AUTOMATIC CENTRAL SOLID GREASE LUBRICATION

Condition: used, Stolmat workstation extraction unit, 2.2 kW motor, Hsdpfx Absy Dphlo Njfg 0.1 kW shaker, Extraction nozzle 200 mm, 13 top-mounted filters, Fully operational.