Used Omg Epm/70 Do Okiennic Rolet Żaluzji for sale (18,912)

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber Hodpsziiw Iefx Anyeu 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Hodpjy Hkd Hofx Anyeu Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: new, Year of construction: 2026, The side brush for the ZP7500 CORMAK sweeper is a practical additional accessory that significantly improves the machine’s performance. It is responsible for thoroughly sweeping hard-to-reach areas—along walls, shelves, curbs, and in corners where the main brush cannot reach. As a result, surfaces are cleaner after just one pass, without the need for touch-ups. Using a side brush also increases the sweeper’s working width, which directly translates into higher productivity. In practice, this means faster cleaning of large areas such as warehouses, yards, or parking lots. The solid construction and wear-resistant bristles ensure a long service life, even under intensive use. The brush is designed for demanding conditions—it effectively collects both fine dust and larger debris such as sand, leaves, or gravel. The brush construction is adapted for operation in challenging industrial environments—resistant to mechanical damage and heavy use. Installation and removal are quick and intuitive, making replacement or servicing easy without downtime. Key benefits: precise sweeping along edges and in corners increased working width and higher efficiency effective collection of both fine and larger debris Hedpfx Anjyvp Ngeysu reduced manual labor and fewer passes required durable, wear-resistant bristles quick installation and convenient operation

Condition: new, Year of construction: 2026, The air filter for the ZP7500 sweeper is a key component of the filtration system, responsible for effectively capturing dust, fine particles, and small debris generated during operation. Its use significantly reduces airborne dust, resulting in improved operator comfort and a cleaner working environment. During sweeping, contaminants are not only collected by the brushes but also drawn into the machine along with air. The air filter ensures these particles are effectively trapped, preventing fine dust from being released back into the surroundings. In practice, this means more efficient and “dust-free” cleaning—especially important in warehouses, production halls, and enclosed spaces. A large filtration surface area and properly structured filter material allow for the effective capture of even very fine particles. Modern sweepers often use panel filters, which offer high performance and ease of use—frequently equipped with shaking or cleaning systems that help maintain consistent efficiency. The filter also serves a protective function for the machine’s components—it prevents contaminants from entering the suction system and other working parts, reducing the risk of failure and extending the machine’s lifespan. An additional advantage is easy access and quick replacement, allowing the machine to be kept in optimal condition without unnecessary downtime. Regular inspection and cleaning of the filter are key to maintaining maximum sweeper performance. Key benefits: effective reduction of dust during operation Hodpfeyvp Tfjx Anyou improved air quality in the working environment high efficiency in filtering fine particles protection of machine components from contamination extended lifespan of the sweeper easy maintenance and quick replacement The air filter is an essential component for ZP7500 sweeper users who expect maximum cleaning efficiency while maintaining high comfort and safety—especially in dust-intensive environments.

Condition: new, Year of construction: 2026, CORMAK LUP7TS WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7TS if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7TS wood splitter The CORMAK LUP7TS wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7TS model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7TS is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for home use, farms, or small service points. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage than stand-mounted versions The CORMAK LUP7TS is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover for the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Standard equipment CORMAK LUP7TS hydraulic wood splitter Stand with wheels Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Log output table Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction Technical parameters of CORMAK LUP7TS: Splitting force: 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Hodpezarv Aofx Anysu Motor power: 2200 W Power supply: 230 V Length: 950 mm Width: 325 mm Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years

Condition: used, Year of construction: 2004, Year of manufacture: 2004 Very well maintained, no use in chopping applications. Pick-up: 1.80 m, 5 tine bars Deflector plate with 2 chains Feed system: hydraulic motor, 2-stage Tire: 500/55-20, 12PR, 10L, ET 0, flotation DL 33 K, articulated drawbar, hydraulic Brakes: pneumatic, with and without steering, 15t, 40 km/h, with ALB 1 cutting frame with silage cutting unit Cutting unit knives Body Additional body support in the middle Metering unit: 2 rollers Electro-hydraulic system - basic equipment PTO shaft, wide-angle, 2 WW, cam-actuated clutch Lighting Automatic grease lubrication for the feed system and pick-up Instead of a cover at the front: automatic loading system Individual operating permit for 40 km/h Loading area lighting on the front panel Axle track: 2.03 m, for a wheel outer width of 2.53 m Price: 19,900.00 Euro net Hodpfxjzdmuys Anysu Location: null

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm Hsdpfx Anezimg Hoyju External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: new, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 4,540 mm, total length: 6,800 mm, All-terrain forklift Manitou M 70-2 Drive Diesel Year built 2025 Lifting height (mm) 4,540 Lifting weight (kg) 7,000 Hedpfxeztgiis Anyju

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: 📐 Truck height: 3400 mm Hedpfx Anszva S Neyju 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: new, functionality: fully functional, mileage: 850 km, power: 132 kW (179.47 HP), first registration: 01/2026, overall weight: 7,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 265/70r19,5, wheelbase: 3,480 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2023, machine/vehicle number: 24-0137, Equipment: ABS, air conditioning, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, traction control, trailer coupling, winter tires, NEW VEHICLE with initial registration on 01/05/2026! Optional availability of extended winter service and municipal equipment! Engine-mounted auxiliary drive including hydraulic pump! *EXTENSION OF WARRANTY to 5 years from initial registration is optional! In addition to the extensive standard equipment, the following options are installed: SEATING Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination, and longitudinal direction, hydraulically sprung, heated Bench seat for passenger with multi-functional storage and stowage compartment Seat heating ELECTRICAL/LIGHTING Expansion module + CAN Open Preparation for telematics system (telematics box) Additional speed limiter CAB EXTERIOR Rear wall of the cab with window, recommended for open bodies to observe rearward traffic Additional vehicle key with remote control Protective grille on the front of the cab Mirror for body width 2350 mm Preparation for snow plow mounting plate Heated windshield CAB INTERIOR/AUDIO Roof storage above the windshield HI-Connect radio with Bluetooth hands-free system and multi-function steering wheel, compatible with Apple Car Play and Android Auto Tablet and smartphone holder with USB charging port Cruise control CHASSIS Trailer coupling, automatic trailer hitch CHASSIS Hodpfjzt Ncfsx Anyeu Adjustment of exhaust pipe for fording Spare wheel, dimension corresponds to chassis tire size ENGINE/TRANSMISSION/AXLES Rear axle ratio i = 5.857 Handbrake control for remote start COLOR Deep orange IC 177 RAL 2011 IVECO BODY - CCM Meiller three-sided tipper 3.00 x 2.20 x 0.35 [m] including lashing eyes and access ladder Meiller long material carrier with cab protection on the front panel for Daily with three-sided tipper Mounting of Meiller tipper Engine-mounted auxiliary drive including hydraulic pump Purchase / financing / lease purchase / leasing / rental possible. Subject to errors and prior sale! Pictures may include optional extras at an additional cost! Delivery date by arrangement! Viewings only by appointment! Address is the office address only, not the vehicle location!

Condition: new, functionality: fully functional, machine/vehicle number: 24-0137, mileage: 850 km, power: 132 kW (179.47 HP), first registration: 01/2026, fuel type: diesel, overall weight: 7,000 kg, tire size: 265/70r19,5, axle configuration: 4x4, wheelbase: 3,480 mm, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, traction control, trailer coupling, truck registration, winter tires, NEW VEHICLE with initial registration on 01/05/2026! Optional available: expansion for winter service and municipal equipment! Engine-mounted auxiliary drive including hydraulic pump! *WARRANTY EXTENSION to 5 years from initial registration is optionally possible! In addition to the extensive standard equipment, the following options are installed: SEATING Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, heated Bench seat for passenger with multi-functional storage and stowage compartment Hodszt Ndcjpfx Anyeu Seat heating ELECTRICAL SYSTEM/LIGHTING Expansion module + CAN Open Preparation for telematics system (telematics box) Additional speed limiter CAB EXTERIOR Rear wall of cab with window, recommended for open bodies to observe rearward traffic Additional vehicle key with remote control Mirror for body width 2350 mm Preparation for snowplow mounting plate Heated windshield CAB INTERIOR/AUDIO Roof storage above windshield HI-Connect radio with Bluetooth hands-free system and multi-function steering wheel, compatible with Apple CarPlay and Android Auto Tablet and smartphone holder with USB charging port Cruise control CHASSIS Automatic trailer coupling CHASSIS Adjustment of exhaust pipe for fording Spare wheel, dimension corresponds to chassis tire size ENGINE/TRANSMISSION/AXLES Rear axle ratio i = 5.857 Handbrake control for remote start COLOR Deep orange IC 177 RAL 2011 IVECO BODY - CCM Meiller three-sided tipper 3.00 x 2.20 x 0.35 [m] including lashing points and access ladder Meiller long material carrier with cab protection on the front wall for Daily with three-sided tipper Mounting of Meiller tipper Engine-mounted auxiliary drive including hydraulic pump Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale excepted! Pictures may include optional extras that incur additional costs! Delivery date by arrangement! Viewing only by appointment! Address is only the office address, not the vehicle location!

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, number of seats: 28, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily City, new vehicle with COC; also available with CNG engine, Telma retarder Permissible total weight: 7,200 kg - Iveco Daily Urbano - City/Intercity bus built on Iveco C70 chassis - Air-suspended rear axle - Telma retarder Hjdpfxezyvp So Anyeu - Length: 8.40 meters, Width: 2.40 meters, Height: 3.16 meters - Body made of fiberglass - Ribbed frame construction made of galvanized steel - Front air conditioning - Diavia air conditioning in passenger compartment 'Madrid' 15 kW (thus, dual A/C) - Double glazing - Twin-width rear doors in low-floor section (electric operation) - Front single electric door with recessed entrance - Entry height front and rear max. 300 mm (without kneeling function) - Total capacity: 34 persons (24 seats — sleeper seats or city bus seats possible — plus 10 standing spaces, including 4 folding seats) - Wheelchair/pram bay - Convector heating in passenger area - Iveco auxiliary heater with water and timer - Interior lighting white/orange or white/blue - Grab rails with hand straps - 2 side luggage compartments + spare wheel hatch - Exterior color: white - Optional: LED headlights, custom paintwork, destination signs, interior monitor, WiFi, etc. available - ... Vehicle is eligible for subsidies in most German states and complies with Section 30d (4) StVZO This is an example vehicle. It is not in stock. Delivery time is approximately 6 months. Low-floor rear starting from €164,990.00. School bus variants available from €149,990.00.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 517401Y00047, Year of construction: 2021, load capacity: 2,500 kg, lifting height: 4,600 mm, free lift: 2,400 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, power: 36 kW (48.95 HP), gearing type: automatic, empty load weight: 4,302 kg, color: orange, Equipment: cabin, lighting, pallet forks, sideshift, trailer coupling, We would be happy to prepare a financing lease offer for you. Technically and visually in perfect condition. Road traffic equipment installed. Hodpfjzznvgjx Anyeu Upon request, we can perform a new safety inspection (UVV), service, etc. Transport can be arranged throughout Europe. No guarantee against errors.

Condition: excellent (used), Year of construction: 2015, Arburg 270C 400-70 Year of manufacture: 11.2015 Injection unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosing volume: 34 ccm Hodpezy Icwjfx Anyju Clamping unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/width/height: 3.18x1.43x1.98 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: new, Year of construction: 2026, The WP200 self-centring 3-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators such as models PS310 and PS320. Its precise clamping mechanism allows quick, stable, and concentric fastening of pipes and cylindrical or hexagonal parts, significantly improving the efficiency and safety of circumferential welding. Main advantages of the WP200 chuck Self-centring 3-jaw mechanism – ensures even and stable clamping of workpieces regardless of their shape. Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. Clamping precision – perfect alignment of workpieces translates into better weld quality and smooth rotation. Durable construction – robust body made from high-strength materials resistant to heavy mechanical and thermal loads. Compact size and easy installation – low weight and precisely positioned mounting holes ensure quick integration with welding equipment. Design and technology The WP200 chuck features three high-quality jaws designed to automatically centre the workpiece on the rotational axis. Its outer diameter of 200 mm and inner diameter of 80 mm allow clamping of workpieces up to 170 mm in diameter. The body is made of high-grade steel, providing excellent resistance to deformation during long-term use. Precision and efficiency The WP200 self-centring 3-jaw mechanism significantly reduces setup time for welding operations. The elimination of backlash and positioning errors directly improves the quality of circumferential welds. Stable clamping of workpieces also enhances operator safety during welding. Applications The WP200 chuck is designed for use with welding rotators, welding positioners, and welding manipulators in operations involving pipes, flanges, rings, and cylindrical components. It is ideal for welding workshops, manufacturing plants, and the steel construction industry. Hjdpfx Ajycqnvonyju Technical parameters Max pipe diameter: 170 mm Outer diameter: 200 mm Inner diameter: 80 mm Mounting hole spacing: 85 mm Mounting hole diameter: 9 mm For welding positioner: PS310, PS320 Weight: 10 kg

Condition: new, Year of construction: 2026, The WP300 self-centering three-jaw chuck is a specialist accessory designed for clamping pipes and workpieces with cylindrical or hexagonal cross-sections in welding positioners and welding rotators. Thanks to its precise self-centering clamping mechanism, it ensures secure and accurate positioning of the workpiece during rotation, which results in higher quality and repeatability of the welding process. Key advantages of the WP300 chuck Precise self-centering mechanism – enables quick and accurate centering of pipes and workpieces, eliminating the need for manual positioning. High versatility – compatible with many welding rotators and positioners, including models PS310, PS320, and PS360. Stable clamping – thanks to three independent jaws, the workpiece remains securely clamped even at high rotational speeds. Robust construction – made of high-grade materials resistant to vibration, loads, and harsh welding environments. Optimal working diameter – the ability to clamp pipes up to 270 mm in diameter allows for a wide range of applications. Design and technology The WP300 model features a compact and durable steel construction designed for intensive operation. The three-jaw mechanism operates synchronously, automatically positioning the workpiece on the axis of rotation. The large outer diameter (300 mm) and the through bore (100 mm) allow for handling a wide range of workpiece dimensions. The mounting holes are designed to ensure full compatibility with CORMAK welding positioners. Hsdpfoycqptex Anyeu Precision and efficiency The WP300 chuck provides high clamping repeatability, which translates into precise circumferential welds. It shortens workpiece preparation time and reduces setup errors, increasing production efficiency and improving operator safety. The solid construction ensures stable operation even under dynamic loads. Applications The WP300 chuck is intended for use in circumferential welding processes, particularly in manufacturing plants, metalworking workshops, and companies involved in steel structure prefabrication. It is used with welding rotators and welding positioners, enhancing their functionality and versatility. Technical data Max. pipe diameter: 270 mm Outer diameter: 300 mm Inner diameter (through bore): 100 mm Mounting hole spacing: 105 mm Bolt hole diameter: 9 mm For welding positioners: PS310, PS320, PS360 Weight: 14 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 22,918 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 4,250 kg, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details. Hedpfx Aozx Sryonyju - Phase: L1/L2/L3/N/PE- Power Consumption: 30 kVA- Maximum Current (A In max): 43.5 A- Rated Current: 50 A- Short-Circuit Current (V max): 5 kA / 440 V max.- Voltage: 400 V ±10%- Frequency: 50 Hz- Control Voltage AC: 230 V- Control Voltage DC: 24 V- Control: 3D Control Siemens 840D SL Operate- Tool Taper: BBT30- Work Table: Integrated NC rotary tilt table, 5-axis simultaneous operation- Swivel Range A-Axis: -120° / +100°- C-Axis Operation: Continuous (Endless)- Maximum Load C-Axis: 100 kg- Table Diameter C-Axis: Ø290 mm- Drives: Torque drives including direct path measurement in A- and C-axis- Software Packages: Sinumerik MDynamics 5-Axis, 3D data model for simulation- Table Options: Clamping pneumatics (1-circuit)- Coolant & Chip Management: Chip conveyor, Production package belt filter with 40 bar internal coolant supply (IKZ), Blow air through spindle center, External blow air, Oil and emulsion mist separator system- Measuring & Monitoring: RENISHAW 3D touch probe kit, Tool breakage monitoring and in-machine measurement, Preparation for 3D quickSET- General Options: Operating mode 3, CE conformity- Automation Interface: Automation interface for external automation on the right- Automation System: DMG MORI WH 3 Cell- Robotic Arm: Fanuc LR Mate 200iD/7L yellow 6-axis robot- Robot Gripper: Double gripper PGN64- Automation Components: 10 DMG drawers, NIO chute, Alignment station, Measuring drawer, Raw material inlay system, Gripper set, Accessories- Machine Operating Hours (from control screen): Machine runtime: 22,918:34 h; Program runtime: 20,920:40 h; Spindle runtime: 18,815:51 h

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) Hjdjiidm Nopfx Anyou - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), functionality: fully functional, working width: 300 mm, brushing unit diameter: 240 mm, total length: 3,600 mm, total width: 1,000 mm, total height: 900 mm, height adjustment type: electric, overall weight: 400 kg, working height: 100 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, workpiece length (max.): 3,600 mm, WOOD AGING BRUSHING MACHINE | 4 BRUSHES | 300 MM Sanding machine for aged wood JBS MACHINERY PROCHERA! Professional PROCHERA brushing/sanding machine designed for structuring, brushing, and aging wood. The machine features 4 independent brushing units and a conveyor belt with adjustable feed speed. It is a robust industrial design intended for continuous processing of wooden components. This brushing machine is ideal for producing aged boards, wooden flooring, facades, countertops, decorative elements, paneling, and other products requiring the enhancement of the natural wood grain. TECHNICAL DATA - Manufacturer: PROCHERA - Type: brushing/sanding machine for wood structuring - Number of working units: 4 - Number of brushes: 4 - diameter 240mm - Maximum working width: 300 mm - Maximum height of workpiece: 100 mm - Feed speed: 0–23 m/min - Conveyor: belt type - Feed speed adjustment: stepless - Adjustment of working units: independent - Brush working direction: option for co-rotating/counter-rotating operation Gross price including VAT margin or 23% VAT invoice Hjdpfx Ajzxz T Tenyou PROCHERA uses various types of brushes in these machines, allowing for both delicate and deep surface structuring. The first units can be equipped with metal brushes for more aggressive grain exposure, and subsequent units can use abrasive brushes for further processing and surface smoothing. The machine is primarily intended for: wood brushing, surface structuring, wood aging, exposing the natural grain pattern, surface preparation before oiling, wood preparation before waxing or varnishing, production of flooring boards, production of facade boards, production of countertops and decorative elements, processing of solid wood. Thanks to the four working units, it is possible to achieve multi-stage surface processing – from a strong opening of the wood structure to its further smoothing and finishing. WHY IS IT WORTH IT? This is a professional machine for companies involved in the production of aged boards, flooring, facades, countertops, and wooden decorative elements. Four working units allow for significantly greater flexibility compared to simple single-unit brushing machines. Adjustable feed allows for the selection of operating parameters for a specific material and desired effect. The machine is ready for further operation. Possibility to view the machine and test its operation after prior contact. JBS MACHINERY JBS MACHINERY GROUP Sp. z o.o. New and used woodworking machines Professional wood processing equipment Possibility to arrange transport in Poland and Europe. We invite you to contact us regarding price, additional photos, a video of the machine in operation, and details regarding transport.

Condition: used, functionality: fully functional, machine/vehicle number: U00188, Year of construction: 2015, operating hours: 1,334 h, construction height: 2,170 mm, empty load weight: 2,750 kg, total length: 2,370 mm, construction width: 1,450 mm, sweeping width: 1,450 mm, Wet scrubber machines Chassis number: U00188 Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Solid rubber Hjdpfszqhh Isx Anyou Rear tire type: Solid rubber Battery voltage: 36V Battery Ah: 930Ah Battery type: PzS Battery year of manufacture: 2015 Battery condition: 60 - 80% Description: German Tennant T17 No.: R0800 Year of manufacture: 2015 Operating hours: 1,334 Chassis number: U00188 Working width: 1,450 mm Overall height: 2,170 mm Length: 2,370 mm Overall width: 1,450 mm Weight: 2,750 kg Battery: 36 V / 930 Ah, PzS, year 2015 Battery condition: 60–80 % Tires: Solid rubber, single tires front and rear Condition: Ready for use and fully functional Visual condition: Very good Technical condition: Very good Location: Düsseldorf Availability: Immediate Charger: Not included Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. If you have not found the right machine, please contact us. We have a large selection of additional equipment available on site. English Tennant T17 No.: R0800 Year of manufacture: 2015 Operating hours: 1,334 Serial number: U00188 Working width: 1,450 mm Overall height: 2,170 mm Length: 2,370 mm Overall width: 1,450 mm Weight: 2,750 kg Battery: 36 V / 930 Ah, PzS, year 2015 Battery condition: 60–80% Tires: Solid rubber, single tires at the front and rear Condition: Ready for use and fully functional Visual condition: Very good Technical condition: Very good Location: Düsseldorf Availability: Immediately Charger: Not included Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site.

Condition: excellent (used), Catalog number: 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 1000mm - Output: approximately 70kg/h - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1800x1150x1540mm - Weight: 900kg ADVANTAGES – Made in Italy – Used briquetting machine – DTR documentation available – Very good condition Net price: 34,900 PLN Net price: 8,116 EUR, depending on an exchange rate of 4.30 EUR Hjdpfx Ajzrnvzjnyeu (Prices are subject to change due to exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2012, Two semi-automatic angle welding machines Minipack with L-seal for shrink film are available. Packaging capacity: 900 packages/min, sealing bar dimensions X/Y: 840mm/600mm, max. film roll diameter: 300mm, max. film roll width: 800mm, working table height: 930mm, machine dimensions X/Y/Z: approx. 2100mm/1000mm/1250mm, weight: approx. 250kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible. Hjdpow N Shdofx Anysu

Condition: used,  Schuppenauslage mit integrierter Presseinrichtung / Mobile delivery with pressing device Heidelberg SPH-70 Schuppenauslage mit Presseinrichtung / Stream delivery with pressing device Heidelberg SPH-70 Baujahr / Year 2016 - Serial-No. 1224446842 Size min. 40 × 75mm - max. 700 x 1000mm Produktdicke / Product thickness max. 4 mm Hjdpfxeyldg Rj Anyeu Presskraft / Pressing force 12.000N Anzahl der Nutzen / Standard no. of UPS max. 2 - 4 Einlaufhöhe / Infeed height 400 - 1000mm Steuerung MCT1 Bedienpult mit Display MCT control system1 control panel with display Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2012, A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000kg, max. lifting height: 760mm. 6) Vacuum tube lifter J. Schmalz Jumbo Sprint 45-Zent, year of manufacture: 2003, load capacity: 45kg, max. lifting speed: 60m/min, max. lift: 1800mm, suction cup diameter: 110mm, lifting column inner diameter: 140mm, length: 2550mm, gripper height: 112mm, suction cups: 4, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Hjdpfx Anex I Rqveyou

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Hsdpfjtxb Apjx Anyju