Used Omron G3Pa-210B-Vd for sale (586)

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Dcsdpfx Adehlnzkoron Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Dcjdpfxjwd Emwe Adrjn Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 981001712, total length: 3,200 mm, total height: 1,950 mm, total width: 1,850 mm, type of input current: three-phase, product height (max.): 150 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 500 mm, product width (min.): 50 mm, input voltage: 400 V, input current: 6 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 3,620 mm, passage height: 150 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, BVM Full-Seal Machine COMPACTA 6010 Fully automatic. Web feed with photoelectric sensor control Used machine, year of manufacture 1998; in operational condition Technical data: Transverse sealing: 620 mm Web width: 560 mm Passage height: 150 mm Longitudinal sealing: continuously operating Film width: max: 800x800 mm, half-tube film Electrical connection: 400 VDS, 50 Hz with earth and neutral Connected load: approx. 3 kW Paint: RAL 5007 - brilliant blue Working height, standard: 850 +/- 50 mm Dedpfx Adjz Dwmwsrocn Description: - Machine frame made of aluminum profiles, screwed together - Feed via conveyor belt in line - Infeed and outfeed conveyor belt speed, steplessly adjustable via frequency inverter - Triggering of the working cycle and positioning of the product via photoelectric sensor, optionally horizontal or vertical - Longitudinal sealing continuously via permanently heated sealing bar, pneumatically actuated with pneumatic clamping device - Film unwinding device with slip clutch and film tear control - Maintenance-free sealing system, permanently heated with integrated cut-off knife (without sealing tapes, separating wire and Teflon fabric) - Infeed conveyor belt can be extended for threading the film - Height adjustment of the sealing level on the transverse and longitudinal sealing via handwheel - Format height adjustment via handwheel - Format width adjustment via handwheel - Machine equipped with control panel and display for messages - Standard equipment includes freely programmable Siemens S 5 100 U control - Aluminum profile/Makrolon safety guard with safety switches

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Dsdpfxez E S Ilo Adrecn Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. 1. Hydraulic beam cutting press Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 11,000 kg, workpiece weight (max.): 11,000 kg, feed rate X-axis: 600 m/min, feed rate Y-axis: 200 m/min, spindle motor power: 11,000 W, product height (max.): 455 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 200×3200 – 200 T – MTP-3212 – 4 AXES X,Y1,Y2,R+V The brand-new MTP 200×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its heavy-duty welded frame, advanced CNC control system, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup for both single-part and high-volume manufacturing. Djdpfxozg Ebws Adrjcn STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system (Germany) • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2530 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 11,000 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES X,Y1,Y2,R+V The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X and Y axes • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. TECHNICAL SPECIFICATIONS • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW Dsdjzg Dk Djpfx Adrscn • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 120 mm, table length: 3,200 mm, throat depth: 230 mm, ram plate length: 3,200 mm, distance table to ram: 390 mm, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, AVAILABLE IN STOCK – READY FOR IMMEDIATE DELIVERY HYDRAULIC CNC PRESS BRAKE MTP 125 × 3200 MTP-3212 Touchscreen Control – 125 T – 2 Axes (X, Y) The MTP 125 × 3200 hydraulic CNC press brake is designed for accurate and efficient sheet-metal bending. It delivers 125 tonnes of pressing force and offers a maximum bending length of 3200 mm. The machine can process sheet metal up to 6 mm thick. It is suitable for workshops and manufacturers operating in electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive, aerospace, and other metalworking sectors. CONTROL AND EQUIPMENT • X-axis back gauge with servo drive • Y-axis beam adjustment with servo drive • Manual R-axis back-gauge finger height adjustment • Back-gauge travel: 600 mm • Two front material supports • AMADA-style quick punch-clamping system • Control panel mounted on a movable arm • LED working-area lighting MTP-3212 CNC CONTROLLER The MTP-3212 features a large colour touchscreen and an intuitive, user-friendly menu. The software automatically calculates the bending angle, simplifying machine setup and improving production efficiency. The controller can store data for up to 40 punch types. HIGH-QUALITY COMPONENTS The hydraulic system uses high-quality German Rexroth valves. The electrical system incorporates Schneider Electric components, while safety components are supplied by Omron and Schneider. Steel hydraulic connections significantly reduce the risk of future leaks. SAFETY EQUIPMENT • Clearly visible safety markings • Side guards • Rear safety gate • Easily accessible emergency-stop switches • Safety light curtain preventing accidental access between the punch and die The machine is supplied with an operating manual and a CE Declaration of Conformity. TECHNICAL DATA • Maximum sheet thickness: 6 mm • Pressing force: 125 t • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back-gauge travel: 600 mm • Controlled axes: X, Y • Motor power: 7.5 kW • Weight: 7500 kg • Dimensions (L × W × H): 3870 × 1550 × 2400 mm • Front supports: 2 • Controller: MTP-3212 • Punch clamping: AMADA-style quick clamping TECHNICAL SUPPORT Dsdpfxoytp N He Adrecn Our specialists can assist with planning bending sequences for complex parts, selecting suitable materials and tools, and choosing optimal working parameters. Pre-purchase technical consultation is also available to help select the correct machine and accessories. Delivery can be arranged. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES Y1, Y2, X + V Dcjdezg H Ewepfx Adron The brand-new MTP 125×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 6 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Maximum sheet thickness: up to 6 mm • Pressing force: 125 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 7,400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: good (used), mileage: 181,410 km, power: 103 kW (140.04 HP), first registration: 05/2013, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 3, total length: 5,410 mm, total width: 1,900 mm, total height: 1,990 mm, loading space length: 2,760 mm, loading space width: 1,600 mm, loading space height: 1,370 mm, Year of construction: 2013, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Fabric - Partition Dcedpfxjz H Nblo Adron = Notes = Configuration: 4x2, Payload: 924 kg, Unladen weight: 1876 kg, Gross vehicle weight: 2800 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2500 kg, Trailer coupling, Type of cab: Single cab, Cruise control, Number of airbags: 2, Parking assistance: None, Electric windows, Electric mirrors, Partition, Color: White, Type of lighting: Halogen lamp, Engine power: 103 kW (138 hp), Fuel: Diesel, Euro: 5, Drive technology: Timing belt, Type of gearbox: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L2 140 hp, Spare wheel, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VD-029-R Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Unladen weight: 1,876 kg Payload: 924 kg GVW: 2,800 kg Functional Loading area height: 58 cm Maintenance APK (Periodic Vehicle Inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2013, 14 pcs medium voltage vacuum circuit breaker to open cell ( on wheels ) 24kV, 1250A, 25kA/1s, 3 phase, 2 pcs open coil 110V DC, 1 pc close coil 110V DC, motor drive 220V AC/DC, producer ABB model VD4.24.12.25, rok výroby. Dcjdpfx Adsvv Huheren

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial Number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial Number: P2135256067 PFM 200N100.1 Serial Number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of delivery. Interfaces Ethernet IEEE 488 USB Frame Bus In / Out Dcjdpfx Adjy Rlbhersn Analog In DC Output Connectors CEE Power Connector Emergency Stop Switch Application Areas Automotive On-Board Network Simulation Voltage Drop Tests EMV/EMC Testing Electronics and Component Testing Research and Development Quality Assurance Technical Notes Four-Quadrant Voltage Drop Simulator Suitable for Automotive Testing Profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. Scope of Delivery emtest / AMETEK testing system in an industrial cabinet AutoWave module VDS 200Q100.2-400 module PFM 200N100.1 module autowave.control V7.4.5 software Software license Connection and fan units Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. We will be happy to answer further questions by telephone.

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Dcodey Uyf Njpfx Adrsn

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Dcjdpfx Ajxq Eyuedrsn

Year of construction: 2009, condition: ready for operation (used), A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible. Dcodpfswtg Ihex Adron

Condition: new, power: 405 kW (550.65 HP), fuel type: diesel, tire size: 385/55-22,5, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam headlights - Low noise - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Leather interior - Alloy wheels - Air suspension - Air-suspended seats - Air horn - Driver alertness system - Particulate filter - Radio/Multimedia system - Rotating beacon - Rearview camera - Disc brakes - Sunroof - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield Internal number for inquiries: 6-122 NEW at PAVIC HIGH-PERFORMANCE HEAVY-DUTY TRUCKS of the absolute highest class! All your wishes will be fulfilled. Currently under construction! VOLVO FH540 HP 8X4 Air/Air with platform and HIAB HIAB iQ.1188 with JIB and work basket, as well as a winch. Truck: Volvo FH 540 8x4 FH - Safety cab (Flat cab with bed) Engine 13 l, 551 hp, Euro 6 Stage E Automatic transmission I-Shift 12-speed I-Shift driving mode: Standard, Performance and Economy VEB+ Volvo Engine Brake Retarder VDS (Volvo Dynamic Steering) Suspension: Fully air-suspended Tires: Front axle 385/65 R 22.5, Drive axle 315/80 R 22.5 AHK ROCKINGER 400 G 150 or ø50mm Active Safety Package: ACC adaptive cruise control, driver warning system, lane change assist, lane keeping assist, rearview camera, turning assist, tire pressure monitoring system, preparation for Alco-Lock, etc. LED headlights LED taillights Driver's seat Comfort, air-suspended, heated, seatbelt integrated into the seat Automatic climate control Dsdpfx Adoz I Tdyerscn Auxiliary heater Auxiliary air conditioning Cooler box with freezer compartment 33 l Instruments High with digital, fully dynamic driver information display, 4 views selectable HIAB 1188 with Fly-Jib and work basket ex works, as well as a winch. -> Crane of the absolute highest caliber! 5-point outrigger system (1 in front of the vehicle and 4 on the sides) Full equipment Fly JIB (detachable) Winch Remote control with linear lever Reachable height with JIB at an angle/steep angle up to 40 meters!!! Reachable height with crane at an angle/steep angle and JIB horizontal approx. 20 meters high and outreach almost 25 meters. Body: Platform with side boards Platform body with 400 mm side board height Platform length approx. 4500 mm Platform width approx. 2550 mm Lashing possibility through 45° outer frame every approx. 200 mm. Forklift protection Support leg plates incl. locking Various toolboxes Chain box integrated into the rear support leg Extensive number of work lights Financing, leasing or hire purchase is possible. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. This is a non-binding offer. Subject to prior sale, errors and changes. General information Year of construction: 2026 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55-22.5;...

Condition: used, Manufacturer: BONINO Type.: VD4N Sizes: D650x400 mm Electrical power: 220V; 2,0 A Dcjdsyyhy Sspfx Adron Power: 0,5 kW; 3000 cycles/min

Condition: like new (used), Coil: 24VDC 3n/01n/c Application: Safety circuit Width: 90 mm Height: 87 mm Dcodoytp H Espfx Adrjn Depth: 120 mm Weight: 411 g Condition: Like new

Condition: like new (used), Coil: 24.0 VDC / 4.5W Application: Safety circuit Width: 45 mm Height: 87 mm Depth: 120 mm Weight: 364 g Dcjdpfeytr Avjx Adrsn

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet Dodpfeyz Si Hjx Adrjcn No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3116-PRO DA-66T Specifications - Nominal bending force: 1600 kN - Motor power output: 15.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 9700.0 kg - Oil tank: 210 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1600 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Dodou T H Iqepfx Adrjcn Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2025, functionality: fully functional, 5 AXIS Machining Center 2131 X, Y, 2100 X 3100MM MOVEMENT RANGE Z AXIS RANGE 1000 MM FOR 5 AXIS HEAVY MACHINES HITECO 17KW S6 TILTING/ROTATION HEAD KIT AXIS RANGE A= +- 185°, C= +- 320°, ORBITAL K PLUS PX-2 15/12 63F NC HSK63 OMRON AC SERVO DRIVE KIT Dcjdpfx Aeu U Hmpodrjn OSAI OPENKEY INDUSTRIAL REAL TIME CONTROL SYSTEM EUCHNER HBA-103037 MANUAL MANIPULATOR CONTROL CABINET AIR CONDITIONING LINEAR MAGAZINE 18 POSITION 16 POSITION HSK63F TURRET MAGAZINE CORRECTION MAP RENISHAW TS27R TOOL MEASURING PROBE SKF AUTOMATIC CENTRAL SOLID GREASE LUBRICATION

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Vertical Packaging Machine Ilapak Vegatronic 1000 VT1000 The machine is in very good condition and ready for operation. - Maximum package width: 380 mm - Minimum package width: 50 mm - Maximum package length: 380 mm - Maximum film width: 780 mm Dcodpjx Nbwvefx Adrjn - Sealing jaw width: 400 mm - Sealing jaw type: constant heat - Jaw drive: ABB servomotor - Control: PLC, HMI Omron - Memory: 40 programs - Supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1280x2325x1285 mm - Machine weight: 800 kg - Option to integrate with weigher, printer

Condition: new, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 4,250 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, low noise, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. ClassicSpace, Mercedes PowerShift 3, company-owned, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, telephone pre-installation, navigation system, auxiliary heater, air horn, ABS (Anti-lock Braking System), ASR (Traction Control), PTO (Power Take-Off), fog lights, leaf suspension, aluminium fuel tank, noise-reduced G1, central locking, green environmental badge. Wheelbase: 4250 mm. Body: 25t VDL SK-25-5700 roll-off system, telescopic arm up to 7 m for container on Dautel swap system, with Liebherr HTM 904F 9m³ concrete mixer. Dautel WS4 swap system, model year 2015. Disc brakes on front and rear axles, comfort driver’s air-suspended seat, velour seat covers for driver, passenger and centre seats, auxiliary hot water heating, driver’s cab, M-Driver cab ClassicSpace, 2.30 m, 320 mm tunnel, 2 remote control keys, locking system with central locking, light sensor, rain sensor, Mercedes PowerShift 3 gearbox G 211-12/14.93-1.0, heavy-duty series, new generation from 18 t, digital radio, speakers, 2-way sound system, navigation system, FleetBoard Manager app compatible, Truck Data Center 7, interactive multimedia cockpit, remote online, remote connect, pre-installation and display for up to 4 cameras, tank 320 l, left, 735 x 700 x 750 mm, aluminium, OM470 engine, straight 6, 10.7 l, 290 kW (394 hp), 1900 Nm, Euro VI E engine, 2nd generation OM470, High Performance Engine Brake, rear engine PTO, flange 100 mm, 650 Nm, Arocs 5th model generation. Dedox Npcaspfx Adrocn New vehicle in stock with day registration 17.08.2023! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm Djdpfx Asvxuc Esdrecn swing diameter: 250 mm turning height: 200 mm total power requirement: 37,7 kW chuck diameter: 315 mm spindle speed max.: 5500 1/min travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining. *

Condition: good (used), Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool Dcjdpfxeu S Tbhe Adren -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg