Used Pbi Dansensor Leakage Tester for sale (290)

Condition: used, This listing is for the KNF Neuberger Diaphram Pump PM16209-122 The unit is in full working condition and is ready for immediate release Description: A compact and corrosion-resistant pump suitable for general laboratory use. Technical Features: 100% oil-free transfer Gedexv A Rbspfx Aixoka Pure transferring, evacuation, and compression of gases Version for slightly aggressive or corrosive gases and vapours Maintenance-free Environmentally friendly Gastight, leakage rate approx. 6 x 10⁻³ mbar x l/s (not tested in serial production) Series N 022 diaphragm pumps are single-head, dry-running devices designed for a wide range of laboratory applications

Condition: good (used), Surface roughness measuring device HOMMEL, consisting of: HOMMEL Tester T 2000 (device from the 1980s), HOMMEL Printer P 2000, HOMMEL stylus LV-50E. Gsdpfx Aijztdctexoka

Condition: used, functionality: limited functionality, power: 87 kW (118.29 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 16,000 kg, Year of construction: 2007, operating hours: 11,500 h, Equipment: cabin, We are offering a New Holland MH CITY mobile excavator/loader with a split boom for sale. Registration number: 300/25. Defects: Oil leakage on the driveshaft, leaking swivel bearing, the electrical system is not fully functional, and the hydraulic quick coupler cannot be opened. Otherwise, the machine is roadworthy, and the engine and hydraulics are in good working order. Technical data: Engine: CNH 87 kW Operating hours: 11,xxx Year of manufacture: 2007 Weight: 16 t Equipment: Suspended seat, crane hook, hydraulic connections on the boom, manual engine speed control, radio, lighting, dozer blade. Accessories: Hydraulic quick coupler Digging bucket, 97 cm wide, 0.8 m³ volume Transport dimensions: Length: 7.6 m Width: 2 m Height: 3 m Weight: 16 t Gjdpfx Aoztvgdoixeka Loading and transport to the destination are possible by arrangement. The stated price is exclusive of VAT.

Condition: as good as new (ex-display), Year of construction: 2026, throat depth: 320 mm, total height: 620 mm, total width: 840 mm, total length: 850 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 200 kg, height adjustment type: mechanical, DuraVision 30 G5 small load/macro hardness testing machine for Brinell, Rockwell, and Vickers testing, conforming to standards according to EN ISO and ASTM, as well as carbon testing according to DIN. Torsionally rigid gray cast iron base for the main load range 3 kg - 3,000 kg (29.43 N - 29,420 N) PLC measuring and control electronics for monitoring the application of the load with automatic test load change and manual table height adjustment via handwheel 12MPix color camera for 3-stage zoom Motorized pivoting 3-position turret incl. 1 objective lens and 1 indenter adapter Removable clamping jaws with clamping inserts enable unclamped and clamped testing Test height 0 - 400 mm, outreach 320 mm Specimen table, support diameter 90 mm Maximum specimen weight 200 kg High-performance LED incident lighting Capacitive 10" touch display with LED backlight Integrated PC with Win 10 IoT 64-bit and 128 GB SSD storage Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 ecos Workflow Touch Basic operating software incl. 1 test method ecos IMAGE for fully automatic, standard-compliant image analysis of Vickers, Knoop, and Brinell Automatic brightness control and autofocus with statistics and test report function ecos templates for frequently used settings ecos CODE for reading and creating QR codes ecos EXPORT EDITOR for individual customization of the export data (format: PDF, Excel, XML, CSV) User management for individual customization of access rights in ecos Workflow Touch ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Note: An additional hand scanner is required to read a QR code (not included in the scope of supply). NKW28E05Z Ball holder 28 mm length, diameter 6.5 mm with 5 mm ball press-fitted in with certificate (EN ISO) Gkedezfnpbepfx Aixja NKW28E10Z Ball holder 28 mm length, diameter 12 mm with 10 mm ball press-fitted in with certificate (EN ISO) L25HBDVG5 Objective lens 2.5x with Brinell SmartLight evo incl. adapter for turret for better evaluation of Brinell indentations (for DV 20/30/200/300/250/350 G5) Z46ZR Base / tool cabinet ZRG for seated and standing use max. specimen weight 500 kg Dimensions (WxHxD): 840 mm x 620 mm x 850 mm Maximum load / drawer: 10kg Best regards

Condition: new, Testers wanted! Gjdpszrxy Dsfx Aixeka Two jointing blocks suitable for REX planers. Details available on request. Technical data: - Diameter: 16 mm - Length: 50 mm

Year of construction: 2020, condition: as good as new (ex-display), Demo tool: Gedpfx Aispyg Saexjka SDT 200 ASD (ATEX) Ultrasonic Multifunction Detector Set. Composed of: 1 x SDT 200 (ATEX) receiver with digital display (numeric) for static peak value detection incl. battery block Monitoring indicators for reliable diagnostics in wear monitoring: RMS. PEAK and Crest factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date and time) 1 x Charger 1 x Peltor Headphones 130 dB 1 x Shoulder Strap 1 x Directional Probe (Screw Tip & Rubber Tip) 1 x plastic case with insert 1 x Instruction manual on USB stick 1 x USB cable for data transfer 1 x calibration certificate (as of 02/2020) 1 x Flexible sensor Atex 550 mm with replaceable sensor head 1 x Spiral Cable 1 x Funnel Directional Probe for SDT200 1 x leakage trailer 1000 pieces (to mark compressed air leaks) Other leakage meters on request. Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 120 mm, table length: 2,500 mm, throat depth: 250 mm, distance table to ram: 385 mm, clearance between the columns: 2,000 mm, oil tank capacity: 160 l, total length: 2,600 mm, total width: 1,450 mm, total height: 2,300 mm, overall weight: 4,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic CNC Servo Press Brake MTP 80X2500 with MTP-3212 Controller – In Stock The MTP 80X2500 is a hydraulic CNC servo press brake designed for accurate and efficient sheet-metal bending. The machine delivers a pressing force of 80 tonnes and offers a maximum working length of 2,500 mm. It is suitable for processing sheet metal up to 4 mm thick. The machine is equipped with two controlled axes: * X-axis – servo-controlled back-gauge positioning * Y-axis – servo-controlled ram movement The MTP-3212 CNC controller features a large colour touchscreen and a clear, intuitive operating menu. Its software automatically calculates the required bending angle, helping simplify machine setup and improve production efficiency. The controller can store data for up to 40 different punch types. The machine is fitted with an AMADA-style quick-clamping system, enabling fast and convenient tool changes. Two front material supports are included. High-quality components ensure reliable operation and a long service life. The hydraulic system uses a renowned German Rexroth valve, while the electrical system incorporates Schneider components. Safety components are supplied by Omron and Schneider. Steel hydraulic connections help minimize the risk of leakage. For comfortable operation, the press brake is equipped with a mobile control unit and a controller mounted on an adjustable arm. Integrated LED lighting provides excellent visibility throughout the working area. The machine includes extensive safety equipment, such as side guards, a rear safety gate, easily accessible emergency-stop switches and a safety light barrier. The light barrier helps prevent accidental access to the area between the punch and die during operation. A Polish-language operating manual and a CE declaration of conformity are included. Technical support is also available to assist with tooling selection, material selection, bending sequences and the configuration of suitable operating parameters. Technical specifications: * Pressing force: 80 t * Maximum working length: 2,500 mm * Maximum sheet thickness: 4 mm * Controlled axes: X and Y Gkedpfx Aszrl Nloixja * Distance between columns: 2,000 mm * Throat depth: 250 mm * Ram stroke: 120 mm * Maximum opening height: 385 mm * Back-gauge travel: 600 mm * Motor power: 5.5 kW * Overall weight: 4,800 kg * Dimensions (L × W × H): 2,600 × 1,450 × 2,300 mm * Front material supports: 2 * Punch clamping: AMADA-style quick-clamping system * CNC controller: MTP-3212 * Safety light barrier: Yes * CE marking: Yes * Documentation: Polish-language operating manual The machine is currently in stock and available for prompt dispatch. Delivery can be arranged throughout Europe and to destinations beyond Europe. Transport costs are calculated individually and depend on the delivery destination. Please contact us with your delivery address or postal code to receive a transport quotation.

Condition: new, Year of construction: 2026, DCV7500E Industrial Dust Collector The DCV7500E is a premium-class industrial dust collector engineered for demanding manufacturing environments. Its robust construction, exceptionally high extraction capacity, and advanced filtration capabilities make it the ideal solution for large woodworking facilities requiring clean air, reliable performance, and continuous-duty operation. Key Features High extraction capacity of 7,500 m³/h, ideal for operating multiple machines simultaneously Large 18 m² filtration area for efficient capture of fine dust particles 35 polyester filter cartridges with 5-micron filtration for improved air quality throughout the production facility Heavy-duty steel construction designed to withstand vibration and intensive industrial use Gedpfx Aisvzqtxexjka Dynamically balanced metal impeller ensures smooth, quiet, and reliable operation Construction and Technology The DCV7500E is equipped with a Ø280 mm inlet port, providing exceptionally high airflow capacity for centralized dust extraction systems. Its metal impeller features aerodynamically optimized blades that maximize extraction performance while reducing noise levels. The airtight extraction system minimizes air leakage and efficiently separates wood chips, shavings, and fine dust particles, ensuring high operating efficiency. Performance and Efficiency Operating at an air intake velocity of 28–32 m/s, the DCV7500E delivers highly effective dust extraction even under fluctuating production loads. Powered by a 5.5 kW motor running at 3,000 rpm, the unit maintains consistent suction performance throughout continuous operation, regardless of the number of connected machines. Applications The DCV7500E is ideally suited as a centralized dust extraction system for woodworking factories and industrial production facilities operating equipment such as: Belt sanders and wide belt sanders Sliding table saws and panel saws Spindle moulders Edge banders and planers Automated woodworking production lines The unit is not intended for extracting wet materials or for use in hazardous or potentially explosive environments. Standard Equipment 35 polyester filter cartridges (5-micron filtration) Ø280 mm inlet port Sealed waste collection containers Optional Equipment HEPA filter for capturing ultra-fine dust particles Automatic filter cleaning system Overhead ducting system for centralized installation Technical Specifications Specification Value Motor Power 5.5 kW / 400 V Motor Speed 3,000 rpm Airflow Capacity 7,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø280 mm Air Intake Velocity 28–32 m/s Total Filtration Area 18 m² Filter Material Polyester, 5 microns, Filter Class "G" Number of Filters 35 Overall Dimensions 2800 × 970 × 2260 mm Weight 306 kg

Condition: new, - Hydraulic motor 80 cc - Shaft diameter: 25 mm Godpowzgr Aefx Aixjka - Connection for leakage oil line

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: S 10054, A professional, high-precision longitudinal seam welding machine designed specifically for the ventilation and ducting industry. The WAMMES SW 1250 provides airtight, high-strength overlapping stitch and continuous seam welds on round ducts and fittings, ensuring compliance with strict industrial leakage standards. Specifications: - Manufacturer: WAMMES Machining (Germany) - Model: SW 1250 Gsdpszbh Hyefx Aixoka - Application: High-efficiency stitch and continuous welding for ventilation ducts, chimneys, and round fittings. - Welding Length (Max): 1250 mm - Material Thickness Range: Galvanized Steel: 0.4 mm – 1.0 mm (approx.) Stainless Steel: 0.4 mm – 0.8 mm (approx.) Key Features & Components: - Airtight Seam Quality: Engineered to deliver tight, consistent welds without damaging the zinc coating on galvanized sheets. - Robust Clamping System: Heavy-duty pneumatic or mechanical clamping bars hold the rolled cylinder perfectly in place for uniform seam alignment. - Adjustable Overlap: Allows for precise calibration of the joint overlap, minimizing material waste. - Industrial Control Panel: Simple, operator-friendly interface for adjusting welding speed, current, and stitch intervals. - Foot Pedal Operation: Facilitates safe, hands-free workpiece positioning and cycle activation. Condition & Availability - Status: Fully operational and in good working condition. - Ready for delivery

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: Gsdpfx Aszl Scroixjka Specification Value Manufacturer X-TEK Systems Ltd., England Model RTR160UF Type Ultra Focus X-Ray System Max. X-ray voltage 160 kV Max. power 60 W Focal spot size 5 (Ultra Focus) Manipulator 50 kg, 5 axes Power supply 230 VAC, 50/60 Hz Serial number RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, likely designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: used, mileage: 5,000 km, power: 220 kW (299.12 HP), first registration: 07/2026, fuel type: diesel, overall weight: 16,000 kg, fuel: diesel, gearing type: automatic, suspension: steel, Equipment: ABS, air conditioning, central locking, cruise control, power assisted steering, soot filter, traction control, trailer coupling, E8B USB port, D6F air conditioning, E6Y reversing warning system combined with hazard warning lights, I6W leaf spring rear axle, D3Q seat cover, velour, driver's seat, Y6S vehicle preparation for GSR, P4E rear marking according to ECE-R70, yellow-red, D2U comfort package, passenger seat, J0U remote update of the driver assistance map, Q8F hand lever, top, for trailer coupling, Q7S trailer coupling G 145 for ZAA, X3O Mercedes-Benz OnRoadService, S4A pre-installation for alcohol tester with immobilizer, U3M 2nd generation electronics architecture, F8B 2 remote control keys, R0N tires according to customer specifications, rear axle, L2H side marker lights, flashing, D3T seat cover, velour, passenger seat, middle seat, O3K Active Safety, B2A disc brake, front and rear axle, B1D electronic compressed air supply unit, medium, D4W power windows, electric, on both sides, Z7J aluminum battery cables, X2E vehicle identification plate, EU, J2Y CB radio, 24 V, N8D Meiller pump, 5-piston, type 255/1, J1C instrument cluster, 12.7 cm, with video function, D1C driver's comfort suspension seat, S1Y tire pressure monitoring system, L1C LED daytime running lights, B5B trailer brake, 2-line, U3W ICUC hardware Gen6, D4A standard cockpit, K5S protective cap for AdBlue dosing system, F1P S-cab, B1B electronic braking system with ABS and ASR, D7A additional thermal insulation, P5Q lashing recesses in the tipper bed floor, S1O traffic sign assist, K3S AdBlue tank 35 l, I8K Fhs basic body production facility Aksaray, E4B interface, fleet management system FMS, Q1I front spring, 6.1 t, parabolic, K5M tanks, lockable, O0T TruckLive, S2P Attention Assist. We can be reached by phone from Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM! Further: Leasing/financing and trade-in possible! -Errors and prior sale are reserved! -All information without guarantee ... more on our website. Gkedpfeznlt Nsx Aixja

Condition: used, mileage: 314,438 km, power: 177 kW (240.65 HP), first registration: 06/2007, fuel type: diesel, empty load weight: 10,990 kg, maximum load weight: 3,010 kg, overall weight: 14,000 kg, axle configuration: 4x2, wheelbase: 5,000 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro4, number of seats: 2, loading space length: 7,500 mm, loading space width: 2,450 mm, Equipment: ABS, air conditioning, cabin, compressor, crane, cruise control, differential lock, parking heater, trailer coupling, * German vehicle * Condition: see photos * Trenchless sewer rehabilitation system * High and low-pressure compressors * Gardner Denver compressor VS 11 * For rehabilitating sewers of any diameter * Using, for example, Reline Alphaliner liners or liners from any other manufacturer * Liner installation * Leakage tests * Powered by a Köhler SDMO 88 KV/A diesel generator Gjdpjzmal Djfx Aixoka * Type J88K * Soundproofed * Water-cooled diesel engine * 180-liter diesel tank * 2 pairs of rehabilitation liners * Electric winch for liner insertion with remote control * Soundproofed work area * Auxiliary heater * Shelving and drawer installation * Mounted on a Volvo FL-240 * Internal dimensions: 7,500 mm x 2,450 mm x 2,400 mm * Wheelbase: 5.0 m * Unladen weight: 10,990 kg * Payload: 3,010 kg * Self-propelled work machine * Fully equipped workshop If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV certificate, a new safety report (SP), or a new UVV certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without warranty. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Year of construction: 2026, condition: new, functionality: fully functional, New vertical pressure leaf filter body Manufacturer: Juneng Model: NYB-20 Filter Area: 20 m² Cake Volume: approx. 400 L Capacity: approx. 4–6 t/h for crude / vegetable oil Working Pressure: 0.1–0.4 MPa, max. 0.5 MPa Shell Temperature: ≤150 °C Machine Volume: approx. 1,680 L Weight: approx. 1,700 kg Shell Diameter: approx. 1,100 mm Plate Spacing: 70 mm Inlet / Outlet: DN50 inlet/outlet, DN40 overflow, approx. DN400 discharge Material: carbon steel as standard Stainless steel version available on request at additional cost Important note: This offer is for the filter body only. PLC automation, automatic valve skid and installation are not included. Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – suitable for crude oil clarification and fine filtration Low maintenance – long service life of filter plates Simple cake discharge – vibration / discharge system depending on configuration Can be steam jacketed – optional heating for waxy oils Filter aid compatible – suitable for bleaching earth, activated carbon or diatomaceous earth Compact vertical design – high filtration area with limited floor space Typical Applications: Crude vegetable oil clarification after settling Bleaching earth filtration after bleaching tank Post-degumming or post-neutralization polishing Filtration of rapeseed oil, sunflower oil, soybean oil and other vegetable oils Technical oil, biodiesel and oleochemical filtration Food, biodiesel and cosmetic-grade oil prefiltration Suitable for oil mills, edible oil processing plants, biodiesel producers, oleochemical plants and industrial liquid-solid separation applications. Gkedpozggc Nsfx Aixea Neuer vertikaler Druckblattfilter / Pressure Leaf Filter Hersteller: Juneng Modell: NYB-20 Filterfläche: 20 m² Filterkuchenvolumen: ca. 400 L Kapazität: ca. 4–6 t/h für Rohöl / Pflanzenöl Arbeitsdruck: 0,1–0,4 MPa, max. 0,5 MPa Arbeitstemperatur: ≤150 °C Behältervolumen: ca. 1.680 L Gewicht: ca. 1.700 kg Behälterdurchmesser: ca. 1.100 mm Plattenabstand: 70 mm Ein-/Auslauf: DN50 Ein-/Auslauf, DN40 Überlauf, ca. DN400 Austrag Material: Standardausführung in Kohlenstoffstahl Edelstahl-Ausführung gegen Aufpreis auf Anfrage erhältlich Wichtiger Hinweis: Angeboten wird nur der Filterkörper. PLC-Automatisierung, automatischer Ventilstand und Installation sind nicht im Lieferumfang enthalten. Hauptmerkmale: Hermetisch geschlossene vertikale Bauweise – kein Auslaufen und geringe Geruchsemission Hohe Filtrationsgenauigkeit – geeignet für Rohölklärung und Feinfiltration Geringer Wartungsaufwand – lange Lebensdauer der Filterplatten Einfache Kuchenentleerung – Vibrations-/Austragssystem je nach Ausführung Optional beheizbar / dampfbeheizbar – geeignet für wachshaltige Öle Kompatibel mit Filterhilfsmitteln – geeignet für Bleicherde, Aktivkohle oder Kieselgur Kompakte vertikale Bauweise – große Filterfläche bei geringem Platzbedarf Typische Anwendungen: Klärung von rohem Pflanzenöl nach der Sedimentation Bleicherdefiltration nach dem Bleicher Polierfiltration nach Entschleimung oder Neutralisation Filtration von Rapsöl, Sonnenblumenöl, Sojaöl und anderen Pflanzenölen Technische Öle, Biodiesel und oleochemische Anwendungen Vorfiltration für Lebensmittel-, Biodiesel- und kosmetische Ölqualität Geeignet für Ölmühlen, Speiseölverarbeitung, Biodieselhersteller, oleochemische Anlagen und industrielle Fest-Flüssig-Trennung.

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Gkedpfxozc N Axe Aixja Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Gkedjzhub Aopfx Aixsa Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230-L1 Dust Collector is a professional dust extraction system designed for woodworking shops and workshops that require efficient dust collection while operating in limited spaces. Powered by a 0.75 kW motor and equipped with a high-performance impeller, it delivers an airflow capacity of 1,150 m³/h for effective removal of sawdust, wood chips, and fine dust from woodworking machines and workstations. It is a reliable solution for both professional production facilities and home workshops. Key Features Airflow capacity of 1,150 m³/h – efficiently removes sawdust, wood chips, and fine dust from machines and work areas. 0.75 kW (S1) continuous-duty motor – designed for reliable long-term operation on a standard 230 V power supply without requiring electrical upgrades. WhirlWind metal impeller – dynamically balanced for smooth, quiet operation and long service life. Mobile base – four heavy-duty bearing-mounted wheels and an ergonomic handle make transportation around the workshop easy. Gedpfevu A Eajx Aixoka Sealed steel housing – minimizes dust leakage while reducing vibration for improved operating comfort. Universal Ø100 mm extraction port – compatible with most woodworking machines and dust extraction hose systems. Vacuum hose with cleaning nozzle – allows the unit to be used for cleaning floors and workstations as well as machine extraction. Construction and Technology The CORMAK FM230-L1 woodworking dust collector features a durable steel housing and a high-efficiency multi-blade metal impeller that generates strong suction while maintaining a low noise level. Integrated seals reduce dust emissions, helping keep the workshop cleaner and improving operator comfort. The machine is mounted on a robust mobile frame with four wheels and an ergonomic transport handle, allowing it to be moved quickly between workstations without interrupting production. Performance and Efficiency The FM230-L1 delivers reliable continuous performance thanks to its S1-rated motor. Operating at 2,800 rpm, it provides powerful airflow for efficient extraction from machines such as: Thickness planers Circular saws Spindle moulders Belt sanders The combined 60 L collection capacity allows extended operation before emptying the bags, helping to reduce downtime. Applications The FM230-L1 is ideal for: Woodworking and furniture manufacturing workshops Technical schools and vocational training centres Home workshops and hobby woodworking Service workshops requiring localized dust extraction for light to medium dust loads Standard Equipment Fabric filter bag Waste collection bag Mobile wheeled base High-performance metal impeller Flexible vacuum hose with cleaning nozzle Bag mounting clamps Optional Equipment High-efficiency filter bags Extraction reducers and Y-connectors Antistatic Ø100 mm extraction hoses Multi-machine distribution manifolds Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Airflow capacity 1,150 m³/h Maximum vacuum pressure 1,020 Pa Noise level 65 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,550 mm Width 420 mm Length 800 mm Power supply 230 V Weight 27 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK FM300S Dust Collector is a high-performance dust extraction system designed for intensive operation in woodworking shops, furniture manufacturing facilities, and the timber industry. Equipped with a 2.2 kW motor, large-capacity collection bags, and an extraction capacity of up to 3,900 m³/h, this industrial sawdust collector provides efficient and safe dust removal even in demanding production environments. Key Features 2.2 kW / 400 V motor – designed for continuous industrial operation. Airflow capacity of 3,900 m³/h – efficiently extracts sawdust and wood chips from multiple workstations simultaneously. WhirlWind multi-blade metal impeller – dynamically balanced to ensure quiet, stable, and vibration-free operation. Reinforced steel construction with additional supports – provides excellent durability and structural rigidity. Quick-release bag mounting system – enables convenient operation and fast bag replacement without tools. Mobile base with bearing-mounted wheels – allows easy movement around production halls and workshops. Highly sealed extraction system – four flexible sealing elements at critical points minimize air leakage and maintain suction efficiency. Construction and Technology The CORMAK FM300S woodworking dust collector is equipped with a WhirlWind series metal impeller, precisely balanced and designed for intensive industrial use. The entire structure has been reinforced with additional supports and brackets capable of handling the weight of fully loaded collection bags. The housing is manufactured from thick steel resistant to deformation, while specially designed sealing elements improve system tightness by reducing vacuum losses and increasing overall extraction efficiency. Performance and Efficiency The FM300S delivers excellent extraction performance when operating with multiple machines simultaneously. The system allows connection through: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets The large filtration surface and four high-capacity bags (2 filter bags and 2 waste collection bags) enable long periods of maintenance-free operation with minimal downtime. This powerful sawdust extraction system is designed to meet the requirements of demanding professional users. Applications The CORMAK FM300S is ideal for: Furniture manufacturing plants and professional woodworking shops – as a central chip extraction system for multiple machines. Industrial workshops processing wood, MDF, plywood, and other wood-based materials. Production lines requiring reliable dust extraction as part of automated processes. Technical schools and training centres – providing an efficient and safe solution for educational workshops. Standard Equipment 2 fabric filter bags 2 plastic waste collection bags Metal mobile base with bearing-mounted wheels Optional Equipment Galvanized hose clamps High-efficiency filter cartridge with filtration down to 2 microns Technical Specifications Specification Value Airflow capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Collection bag capacity 150 L Number of bags 2 × fabric (filtering), 2 × plastic (waste collection) Extraction inlet 1 × Ø150 mm or 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 1,960 mm Godevu Artspfx Aixska Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual (DTR) CE Declaration of Conformity Yes

Condition: new, Year of construction: 2026, TA3510 Scissor Lift Pallet Truck The TA3510 scissor lift pallet truck is a professional device designed for the safe and efficient transport of heavy loads in various industries. Thanks to its robust construction, innovative hydraulic solutions, and a range of safety features, the TA3510 is one of the most reliable and versatile scissor pallet trucks available on the market. It is perfectly suited for warehouse logistics, manufacturing, battery transport, and many other applications where durability and precise lifting are required. Main Advantages of the TA3510 Scissor Lift Pallet Truck High load capacity – a lifting capacity of 350 kg enables comfortable transport of heavy loads. Safety features – the truck is equipped with an overload protection valve preventing excessive loading, as well as wheel locking mechanisms ensuring stability during operation. Easy operation – the intuitive design and hydraulic foot pump system make lifting and lowering loads simple and convenient. Robust construction – manufactured from high-quality materials, the truck offers excellent resistance to mechanical damage and long-term reliability. Flexibility and manoeuvrability – swivel wheels allow easy movement and precise manoeuvring in tight working spaces. Construction and Technology of the TA3510 Scissor Lift Pallet Truck The TA3510 scissor lift pallet truck is a highly durable product designed for intensive operation in demanding working conditions. Its reinforced construction, made from high-quality materials, ensures long-lasting strength and reliability. The hydraulic system has been designed to provide smooth lifting and lowering of the platform, while the sealed pump housing protects against contamination and oil leakage, increasing the overall durability of the device. The TA3510 is equipped with a special overload protection valve that prevents excessive loading of the truck. This solution not only improves safety but also helps reduce operating costs. The ergonomic handle and polyolefin swivel wheels provide comfortable operation and excellent manoeuvrability, which is particularly important when working in confined and difficult-to-access areas. Precision and Work Efficiency of the TA3510 Truck The TA3510 scissor lift pallet truck ensures high efficiency and precise load lifting thanks to its advanced hydraulic system. With a lifting range of up to 1300 mm and a minimum platform height of 340 mm, the device is ideal for transporting pallets and other heavy loads in warehouses, production facilities, and areas with limited working space. This high level of performance improves the efficiency of warehouse and production processes, significantly reducing task completion times and increasing operator comfort. Standard Equipment Reinforced polyolefin wheels providing stability and long service life Ergonomic handle for easier manoeuvring Sealed hydraulic foot pump ensuring convenient operation Platform lowering speed adjustment for improved control during lifting and lowering operations Godjric Emepfx Aixska Wheel locking mechanism ensuring safety and stability during operation Technical Specifications – TA3510 Parameter Specification Maximum load capacity 350 kg Maximum platform height 1300 mm Handle height 975 mm Working platform dimensions 500 × 910 mm Minimum platform height 340 mm Weight 85 kg

Condition: repair required (used), functionality: limited functionality, mileage: 519,716 km, power: 300 kW (407.89 HP), fuel type: diesel, overall weight: 26,000 kg, Year of construction: 2006, Mercedes-Benz Actros 930.20 with Palfinger loading crane Vehicle data: Mercedes-Benz Actros 930.20 License plate: G482WM VIN: WDB9302031L108073 Godpfxszmtm Io Aixoka First registration: 04/13/2006 Mileage: 519,716 km Listed defects: Tachograph inspection due Crane inspection due Several active engine faults Air preparation unit leaking Air tank rusted Brake cylinders of the 1st and 2nd axles need to be replaced ABS fault on the 3rd axle Triangular link arm on the 3rd axle damaged Front panel torn in several places Left mirror cracked and damaged in several places Front mirror broken Fenders of the 1st axle, left and right, damaged Reflectors and reflector panels partially missing Floor of the loading platform broken through in several places Tire on the 1st axle, right side, damaged Tire on the 2nd axle, left side, defective on the outside Splash guard on the 3rd axle damaged Oil leakage at the right crane support and lifting arm Rear of the cab, left side, rusted through Wiper blades need to be replaced Side marker lights partially defective or missing Rear lighting system partially not functioning Steps loose and broken Stone chip in the windshield Defects on the Palfinger loading crane 2 hydraulic hoses on the knuckle arm need to be replaced Safety catch on the crane hook missing Crack on the transport safety device Control valve of the extension cylinder leaking

Year of construction: 2026, condition: new, functionality: fully functional, New filter body Model: NYB‑30 Filter Area: 30 m² Cake Volume: ~600 L Capacity: 6–8 T/h (crude oil) Working Pressure: 0.1–0.4 MPa (max 0.5 MPa) Shell Temperature: ≤ 150 °C Machine Volume: ~2,300 L Weight: ~2,500 kg Shell Diameter: ~1,200 mm Plate Spacing: 70 mm Inlet/Outlet: DN 50 inlet/outlet, DN 40 overflow, DN 500 discharge Total Height: ~3,150 mm Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – ideal for pre-degumming and post-bleaching crude oils Low maintenance – long service life of filter plates Simple cake discharge – hydraulic or manual vibration release Can be steam jacketed – optional heating for waxy oils Filter aid compatible – supports use of bleaching earth or diatomaceous earth Typical Applications Crude oil clarification after settling Bleaching earth filtration (after bleaching tank) Post-degumming or post-neutralization polish Winterization step before dewaxing Food, biodiesel, cosmetic-grade oil prefiltration Neuer Juneng NYB-30 vertikaler Druckblattfilter mit 30 m² Filterfläche. Angeboten wird nur der Filterkörper, ohne PLC-Automatisierung und ohne automatischen Ventilstand. Technische Daten: - Filterfläche: 30 m² - Filterkuchenvolumen: ca. 600 L Godpfswwmziex Aixjka - Kapazität: ca. 6–8 t/h für Rohöl / Pflanzenöl - Arbeitsdruck: 0,1–0,4 MPa, max. 0,5 MPa - Arbeitstemperatur: ≤150 °C - Behältervolumen: ca. 2.300 L - Gewicht: ca. 2.500 kg - Standardausführung in Kohlenstoffstahl - Edelstahl-Ausführung gegen Aufpreis auf Anfrage erhältlich Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen.

Condition: excellent (used), ESPEC Climate Testing Chamber PL-3KPH Device Data Gkodpey H H Iujfx Aixea Manufacturer: ESPEC Type: PL-3KPH Design: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from ESPEC. Suitable for temperature and humidity testing. Used in research, development, and quality assurance. Operating Status Display: STOP / ready for operation. Technical Data Model: PL-3KPH Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A Air-cooled (no external water connection required) Weight approx. 350 kg Equipment Touchscreen control panel Program and constant operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable gland Overheating protection Hour meter Industrial design Scope of supply ESPEC Climate Testing Chamber PL-3KPH Scope of supply as shown in the images Service before delivery (optional) Functional test Refrigerant service Leakage test Test run with protocol Condition Used. Condition see images. Note Loading and transport can be arranged upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulatoren, water-cooled Climate chamber 110m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulatoren, meaning it is a climate chamber with a modular structure that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's location. This makes retrofitting (more depth or additional modules) as well as later relocation straightforward. Technical data climate chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120mm (4x left & 4x right) Windows: 1x (460 x 550mm) in the front chamber door, heated 1x (1260 x 1000mm) in the left side wall, heated Temperature range: -40°C to +120°C Time deviation: ± 0.8K – 1.5K according to DIN 50011 in an empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerants 3. Leakage test with certificate Gsdozizldjpfx Aixoka 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffer & vacuum modes with backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional helium leak detector, Pfeiffer Vacuum HLT 560. This device is designed for high-precision leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service applications. It is capable of reliably detecting even the smallest leaks. The HLT 560 uses mass spectrometry and can be operated in both vacuum and sniffer modes. With the sniffer probe, leak locations can be pinpointed, while in vacuum mode, entire assemblies or systems can be inspected. Integrated turbopump and backing pump make this unit a complete, mobile testing system. Application areas (examples): • Leak testing of components and assemblies • Testing of vacuum chambers, pipelines, valves, heat exchangers • Quality control in production • Service and maintenance of vacuum technology systems Technical Data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Integrated turbopump Backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Test gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum operation / sniffer operation Reference leak rate: (7.4 ±15%) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Gjdpfx Aiezix Hxexjka Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Godpfx Aijzizkysxska Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.