Used Peddinghaus Caddy 50 for sale (34,213)

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Equipment - Flat, profile, and bar steel shear Gsdpfx Ajrknnfshzoud - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Year of construction: 2011, condition: excellent (used), centrifugal single-stage vertical cantilever pump FIP ALFA V2CH 50-33 construction of year:2011 DN:50 Nominal flow 40 m³/h Gedpfoh Rwafjx Ahzeud Nominal head 29 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz engine speed: 1450

Condition: ready for operation (used), Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible. Godpjy Uyc Iefx Ahzoud

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. Guedpfx Ahorivv Eezod The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Technical details: Guedpfxsxu Dx Dj Ahzod dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Gusdpfx Aou Ick Tshzod Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. *

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 weight 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar Guedpfx Ajyycwrjhzed ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar Gusdpfx Aoyycwlshzjd - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm

Condition: used, Max. Stanzkraft: 650 kN Hole e.g. a 20 mm hole in 20 mm steel For other performance data see nameplate or on request Includes assortment of punches and dies Guodpfx Ahjf Nwqlezjd Very good condition

Condition: used, Punching force: 200 kN Gujdpfjrmudgsx Ahzsd Thread, for example a 13 mm hole in 12 mm steel Viewfinder via handwheel Assortment of tools is included in the price

Condition: used, Year of construction: 1997, Thread(e) e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Gujdpfx Aheizuhpozed Including finder for pegging and setup Assortment of tools is included in the price Punching force: 1000 kN mass: 2400 kg punching force: 1000 kN

Condition: used, Year of construction: 1992, Max. punching and shearing capacity: 800 kN Punches e.g. 25 mm holes in 20 mm steel Gedpjwak Hnefx Ahzjud Shears on the flat steel shear on 350 mm up to 15 mm steel Further technical data on request With a range of punches and dies as desired

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Further technical data on request Gjdpfx Ahstmyifszoud With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Guedpfx Asq D E Tcohzed Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Guodpem T Amuofx Ahzed Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Very good condition

Condition: used, Max. punching force: 400 kN Max. shear force: 600 kN Punches 20 mm holes in 16 mm steel Cuts on the flat bar shear up to 300 mm to material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Weight: approx. 1,500 kg Gusdpfx Ahoy Tldnozsd

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw Guodpfx Asdkxlkohzsd - shaft diameter 50 mm - weight 325 kg - 400 volt 3 phase

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. Gusdpfx Asxp Ndhohzed A demonstration is possible at any time in our showroom.

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. The listed price is for 1 piece. Gedpfx Ahoyuqrfozoud

Condition: excellent (used), For sale: Professional GARANT SK40-6-50 tool holder for precise clamping of Ø6 mm tools. Product of the renowned Hoffmann Group / Garant – Germany, used in CNC machining centers. • Clamping type: SK40 (DIN 69871) • Size: Ø6 mm • Length: 50 mm • Catalogue number: 300210.6 • Balancing: G2.5 up to 25,000 rpm • High accuracy, stable clamping • Ideal for VHM end mills and drills as well as precision tools • Very good condition – tested, ready for use. GARANT tool holders represent the top tier in clamping technology – guarantee of quality and durability. -- PRICE PER PIECE -- Gedpfxew Syzws Ahzeud

Condition: excellent (used), For sale: professional SK40 milling tool holders Ø8-50 according to DIN 69871 AD. • Taper SK40 • Weldon clamping Ø8 mm (side screw) • Length 50 mm • Central cooling AD • Very good condition – used, fully functional • Some holders are sold complete with milling cutters and drills. Guedpjxcgzqefx Ahzsd

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Gjdpfx Ahoxl Rf Sozjud

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) Gusdpfx Ahsyxtfwszsd 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: new, I am offering a professional drum pump from the renowned German manufacturer Lutz – designed for use with various liquids (chemicals, oils, industrial media). ✅ Condition: ✔️ New ✔️ Motor housing has been replaced with an original (factory) part – the previous one was damaged during transport ✔️ Fully functional, ready for operation 🔩 Technical data: Manufacturer: Lutz Pumpen GmbH (Germany) Pump model: MP PP 50/41-R DL SS Motor: MI 4-230 Power supply: 220–230 V / 50 Hz Power: 450–500 W Current: 2.5 A Protection class: IP24 Tube length: 1200 mm Material: PP (polypropylene) + stainless steel (SS) Gusdpfx Asyzulwshzsd ⚙️ Applications: - Industrial chemicals - Oils, technical fluids - Industry, workshops, manufacturing - Emptying barrels and tanks 📦 Included: ✔️ Lutz pump ✔️ MI 4-230 motor ✔️ Hose + fittings as shown in the photos 🌍 Country of origin: 🇩🇪 Germany ℹ️ Additional information: - High-quality equipment – German-made - Ideal for professional applications - Shipping or personal collection available

Condition: used, Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, spindle stroke: 300 mm, number of spindles: 3, overall weight: 9,000 kg, Drilling machine for steel structures - drilling holes in steel profiles. manufacturer - PEDDINGHAUS Germany; type - TDK 1000/3; year of manufacture - 1992; number of drilling spindles - 3 pcs. (two horizontal and one vertical); drilling diameter in S355 steel - from 8 to 40 mm; type of drills - HSS high-speed steel; drill mounting in the spindle - Morse taper 4; drill cooling - through the spindle and channels inside the drill; spindle feed - hydraulic with pressure force adjustment; Godpfx Aepl Dycjhzoud spindle extension - max. 300 mm; material feed and length measurement - roller; CNC control - SIEMENS Sinumerik 840; software - CIM Steel; Production capabilities: •drilling INP I-beams: 80-600 mm, IPE: 80-600 mm, IPB: 100-1,000 mm, IPBL: 100-1,000 mm, IPBV: 100-1,000 mm; •drilling UWP channels: 50 x 25 - 400 mm; •drilling equal-sided angles: 80 x 8 mm - 200 x 24 mm; •drilling unequal-sided angles: 80 x 65 x 8 mm - 250 x 90 x 16 mm; •drilling flat bars: min. 15 mm; power consumption - 35 kW; original paint - the machine has not been painted; weight - 9,000 kg; CE - does not have; The machine is connected to the power supply, ready for testing.