Used Pile Turner for sale (504)

Condition: ready for operation (used), Year of construction: 1989, Pallet block saw LUDWIG incl. feeding of the blocks to the skid nailing machine Skid nailing machine with automatic feeding of the skids to the skid infeed Skid infeed incl. skid supply conveyor with skid turner and automatic separation, positioning and skid feed Credpfx Asuzhrpeppoc Assembly machine with U-template suitable for manual, semi-automatic or fully automatic feeding with automatic narrow / wide travel cycle time for nailing: start - nailing - nailing - nailing - template in starting position approx. 6 seconds Column stacker including various stacking programs, 90° or 180° stacking of pallets possible All nailing machines with central lubrication

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 2,900 mm, total width: 620 mm, total height: 1,500 mm, for approx. 100 E2 crates/hour incl. crate turner (single-person operation) System layout: 1. Zone – Main washing zone: – with a centrifugal pump with 2.2 kW (900 l/min at approx. 1 bar) distributed over a total of 50 stainless steel nozzles, which enable thorough cleaning of all 4 sides. A plate filter continuously cleans the washing solution and filters it continuously. – Tank volume 180 l – Washing temperature in the main washing zone 50-55°C The crate transport takes place via a spiral (KITZINGER utility model), which ensures precise crate separation and an unobstructed impact of the washing solution for comprehensive cleaning of all sides. 2. Zone – Rinsing area: – The products cleaned in the machine are thoroughly rinsed from all sides with fresh water. The fresh water must be at least 45°C when fed to the machine and is heated to approx. 80°C in the system. Approximately 250-300 l are required per hour. Technical data: – Overall length of the base machine: 2000 mm – with crate turner: 2500 mm – with crate turner and discharge table: 2900 mm – Machine width: 620 mm – Machine height: 1500 mm – Washing tunnel passage width: up to 430 mm (adjustable) – Washing tunnel passage height: 330 mm – Total heating power: boiler 1 x 10 kW – Pump power: 2.2 kW, 900 l/min at 1 bar – The housing is completely welded and consists entirely of stainless steel. The substructure is largely made of 3 mm sheet metal and is therefore very durable. The machine has the following connections: – Fresh water at least 45°C, 3/4″, – Flow pressure at least 1, max. 6 bar via hose connection, – Consumption approx. 300 l/h, IMPORTANT: the machine requires warm fresh water, connection 1/2″ or 3/4″ – Electricity 14 kW, 400 V, 50 Hz, 32A fuse – Wastewater DN 40 to floor drain or channel near the machine, below the machine tank with standpipe – with main switch – powerful centrifugal pump Crjdpfjza Dvuex Appec – system on stainless steel rollers – sloping discharge side for returning water to the bottom of the crates

Condition: used, Year of construction: 2006, 38 Mio. prints approx. Format: 370×520 mm (14×20″) Easyplate CP-Tronic, Alcolor Streamfeeder Low-pile delivery Crodpfezavcgox Appjc Perfecting Powder sprayer Available: at short term

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m • Clamping block 1-2: 86cm • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems - Trimming band saw BRENTA, roller width 130 - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA Crsdpezbtq Refx Appsc - Roller-chain conveyors for all saws, as shown in the photos

Condition: good (used), machine/vehicle number: 304005, Horizon AFC-566FKT 6 buckle plates + cross knife + 2 buckle plates Max sheet size: 558 × 850 mm Min sheet size: 128 × 148 mm Paper weight: approx. 35–240 gsm Production speed: up to 42,000 sheets/hour Fully automatic setup Colour touchscreen control Job memory system High-pile feeder Multiple fold patterns Suitable for parallel, letter and cross folding applications 400 V / 3-phase Rated current: 5.6 A Credpfx Aozaq Nbeppoc Machine information Model: Horizon AFC-566FKT Serial number: 304005 Total counter: 1,494,174 sheets Operating hours: 74,254 h Made in Japan *Technical details may vary

Condition: used, Year of construction: 1990, Format: 318 x 470 mm Equipment: Format: max: 318x470mm, min: 148x210mm missfeeding-, doublefeeding and jamming control integrated jugger bin pile height: 10cm paper weight: 23-210g/qm pile height: 10cm/bin capacity: up to 2400 cycles/hour dimension: 165x65x207cm weight: 510kg power: 3-phase 400 Volt Crsdezakx Nepfx Appec Suction Air (Vacuum Feed) Air Blower With vaacum compressor

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Showroom machine from the manufacturer! Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Calendar collating machine Type - MKW RAPID UT - System Belt conveyor table 20 - Number of stations B3 - Format 35 x 50 cm / 13.78" x 19.68" GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 20 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - Sheet sizes 3.94" x 5.51" up to 13.78" x 19.68" - High-Pile version with max. 70 cm / 27.55" stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Clocked blown air for accurate sheet layering - Electronically adjustable sheet layering - Electronic machine control by Industry-PC system - High quality 15'' color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Delivery control system for criss-cross with adjustable set interval - Transport table lighting with LED-Lamps - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PC - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - LED signal lights to visualise the information of each station SOFU-HIVIS incl. (enables simple status detection) Alternative to Jogger: 1 High-Pile delivery Type MKW RAPID HA 350-UT / PN + T-BELT - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Pneumatic drive unit for staggering of sets - Automatic delivery on to buffer belt - Buffer belt lenght approx 2,00 m Cjdpfx Aey U Hdljpperc - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Subject to prior sales Detailed offer on request

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Crsdpfx Aszatf Eeppoc Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg.

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG290, working width: 560 mm, compressed air connection: 6 bar, warranty duration: 6 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52B (Bottom Suction Feeder) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Credpfxezbaxuj Appec Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: used, Year of construction: 1989, functionality: fully functional, Used industrial Stahl T50/4-KB-F folding machine with a flat pile feeder, a 4-buckle parallel folding unit, and a cross-fold/knife unit. The machine is a complete Stahl folding system consisting of: F 50A flat pile feeder T 50/4A 4-buckle parallel folding unit KB 52.2 cross-fold/knife unit This configuration allows for 4 parallel folds and 1 cross fold, making the machine suitable for brochures, leaflets, forms, signatures, printed sheets, and general post-press folding work. Main features: Industrial Stahl folding machine Flat pile feeder 4-buckle parallel folding unit Cross-fold/knife unit Suitable for B2 sheet format Crodpfx Apjzbu Rlopoc Robust mechanical construction Original Stahl system, Made in Western Germany Suitable for printing houses, bookbinding shops, and paper processing companies Technical data: Model: Stahl T50/4-KB-F Feeder: F 50A flat pile feeder Folding unit: T 50/4A, 4-buckle parallel folding unit Cross-fold unit: KB 52.2 Folding configuration: 4 buckles + 1 cross fold Maximum sheet size: 500 × 750 mm Minimum sheet size: 100 × 150 mm Folding speed: up to 180 m/min Approximate output: up to approximately 15,400 sheets/hour with 50 × 70 cm sheets Frequency: 50 Hz Voltage: 380–400 V Approximate dimensions: 3.80 × 1.25 × 1.60 m Approximate weight: 1,260 kg Year of manufacture: 1989 Made in Western Germany Condition: used, complete system, available for inspection Location: Budapest, Hungary

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1299, color channels: 2, RYOBI 522HE 2-Color Offset Press with NP52 Numbering & Perforating Unit – 2007 Well-maintained RYOBI 522HE two-color B3 sheetfed offset press, manufactured in 2007, equipped with an NP52 numbering and perforating unit. This is not just a standard 2-color offset press. With the NP52 unit, the machine is particularly suitable for numbered forms, tickets, vouchers, perforated products, business forms, and commercial printing jobs where inline numbering or perforation is required. The machine is equipped with: NP52 numbering and perforating unit Ryobimatic dampening system Technotrans cooling unit Grafix Digitronic powder spray Semi-automatic plate change Low-pile delivery 2-color B3 sheetfed offset configuration Main technical data: Max. sheet size: 520 × 375 mm Max. sheet size with NP52 unit: 520 × 365 mm Min. sheet size: 100 × 105 mm Min. sheet size with NP52 unit: 257 × 182 mm Max. printing area: 505 × 350 mm Plate size: 510 × 400 mm Paper thickness: 0.04 – 0.40 mm Speed: up to 11,000 sheets/hour Speed with NP52 unit: up to 8,000 sheets/hour Cjdpfx Apezbuk Eopsrc Counters: Total print impressions: approx. 20.64 million Machine counter: approx. 30.28 million Electrical data: 200 V / 50 Hz / 3-phase Power consumption: 7.5 kW Current: 27 A Dimensions and weight: Dimensions: 2,598 × 1,955 × 1,588 mm Weight: approx. 3,350 kg The machine is located in Budapest, Hungary, and can be inspected by appointment.

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Crjdpfxey Umkle Appec Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Codevvi Tyspfx Appsrc Storage location: Customer

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc. Csdozagkzjpfx Appsrc

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2012C4-127-6/1, total height: 2,800 mm, load capacity: 160 kg, construction height: 2,800 mm, year of last overhaul: 2026, total width: 1,450 mm, total length: 1,800 mm, lifting height: 2,000 mm, input voltage: 400 V, Bowl lifter/elevator: Logiudice brand, model: SR01-160, year of manufacture: July 2012, serial number: 2012C4-127-6/1. The equipment is in very good optical and technical condition, and works flawlessly Maximum working width: 2,000 mm Crsdpfx Apoy Hmaqepjc Installed electrical power/power supply: 1.5 kW; 400 V, 50 Hz, 3 phases, 3.44 A; Steel structure varnished metallic gray RAL 9007; Bowl lifter/turner with discharge on the left side; Electromechanical control panel; Discharge height: 2,000 mm Dough capacity in bowl: 15 to 160 kg Flour capacity in bowl: 6 to 100 kg bowl volume: 250 L Lifting-lowering system: hydraulic with cylinder, hydraulic system with Marelli Motori engine, and Hydroven hydraulic tank, model 2144LQ, maximum pressure generated of 40 bars Tank weight: approx. 880 kg Overall dimension L 1,800 mm x W 1,450 mm x H 2,800 mm Transport dimension: L 1,800 mm x W 1,450 mm x H 2,000 mm Maximum vat tipping point 2,900 mm Automated work cycle; This vat lift is suitable for industrial use and offers solutions for any type of lifting. It has a very resistant steel structure; a hydraulic lifting system with a chain for small or large dough capacities. The equipment can be adapted for any model or type of vat trolley/bowls. For Romanian companies, there is the possibility of selling in installments, 50% down payment, and monthly installments with interest of 1%/year in Euros. Price Euro 12.200 Euro + VAT, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2009, operating hours: 12,300 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 224 kW (304.55 HP), empty load weight: 85,760 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE27 Condition: Ready for operation and fully functional Technical condition: Good Codpfx Apoxybdhjperc Front tyre type: Pneumatic Front tyre size: 18.00-33 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Rear tyre condition: 40 - 60% Description: We sell in as-is condition ex works, to save on transport and handling costs. Sideshift, Full cabin, air conditioning, joystick, Piggy back, pile slope camera, central lubrication, movable cabin

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Completely Refurbished Folding Machine (Year of Manufacture: 2005) In absolutely pristine, well-maintained condition. Counter reading: 5.5 million; rollers have been refurbished. Formats: Min. 110 x 100 mm, Max. 520 x 850 mm Minimum fold length: 35 mm Memory capacity: 200 jobs Total throughput: Only 42 million; 2nd folding unit: 11 million 1st Folding Unit: 6 automatic pockets, automatic roller and stop adjustment Steel segment rollers (replaced 1 million cycles ago) 2nd Folding Unit: 4 pockets, newly refurbished rollers FSA Flat Pile Feeder with side blowers Pico compressor Timed delivery unit (AM 52) Window fold pocket Bridge unit 380 Volts / 16 A (all maintenance-free three-phase motors) Codpfx Apsy Uciqjperc Original photos provided by the customer Dismantling scheduled for June 1, 2026 Optional add-on: MS 45 (completely refurbished, with rollers in good condition) Available for sale with or without the knife unit Availability: Immediate

Condition: used, Year of construction: 2000, Fully automatic machine to affix promotional inserts Equipped with: Books pile feeder Feeding Measuring book height Opening cover Counting/opening Tearing Feeding promotional material Separating promotional material Adjusting promotional material Cutting promotional material Gluing promotional material Credsy Syr Dspfx Appsc Sticking in Pressing Delivery Technical data: Max. size: 316 x 216 mm Min. size: 90 x 60 mm Max output: 1200 pieces/hour Thickness 3 – 25 mm Promotional inserts: single/folded sheets, thinly bound products (max. 1,5 mm thick) Dürrer promotional/explanatory video:

Year of construction: 2022, condition: ready for operation (used), There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible. Cedjy Tx R Iopfx Appsrc

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 18,155 h, load capacity: 45,000 kg, lifting height: 14,565 mm, fuel type: diesel, power: 243 kW (330.39 HP), empty load weight: 65,600 kg, drive type: Diesel, construction width: 4,150 mm, Full-container reach stacker Cedsy S Hcijpfx Apperc Transmission: Clark 4-speed automatic Condition: Ready for operation and fully functional Technical condition: Good Front tyre size: 18.00-25 Rear tyre size: 18.00-25 Piggy-back, hydraulic pile slope on spreader, hydraulic sliding cabin

Condition: good (used), Year of construction: 1999, operating hours: 6,972,373 h, functionality: fully functional, PAPER STACKER LIFT Csdpfx Aoy T Rh Sopporc

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6972372, PAPER STACKER LIFT Crjdpfx Aey T Rhroppsc

Condition: excellent (used), Year of construction: 2011, Ref: 11100 . 2011 Duplo DPB-500 EVA Perfect Binder Excellent condition! Only 40,000 books on the counter! Single clamp solo binder designed for the digital book-on-demand market with operation by one person. Features: • EVA spine glue unit • Programmable pre-melter • Computerised set-up with icon based touch-screen Cjdpfx Apey Nzcljpjrc • Automatic setting of clamp book thickness and cover scoring • Double/Out of cover detector • Light beam score positioning • Milling & roughing unit with dust bag extraction • Internal vertical stacking tray delivery Specification: Book thickness: Min 1mm / Max 51mm + cover thickness Book size (spine × fore-edge): Max 360mm × 320mm Min 120 × 120mm Cover size: Max 360 × 696mm / Min 120 × 250mm Cover weight: 80-302gsm Cover Pile height: 70mm Mechanical speed: Max: 525 /hour

Condition: good (used), Year of construction: 1995, SERIAL NUMBER: 6572818 Codoy T Ig Eepfx Apperc PAPIER STAPELLIFT

Condition: good (used), Year of construction: 1998, operating hours: 385 h, functionality: fully functional, color channels: 8 color, paper weight (min.): 40 g/m², paper weight (max.): 400 g/m², paper width (min.): 280 mm, paper width (max.): 720 mm, paper height (min.): 400 mm, paper height (max.): 1,020 mm, total length: 720 mm, total width: 11,500 mm, total height: 3,200 mm, space requirement length: 13,500 mm, space requirement width: 2,500 mm, space requirement height: 2,500 mm, counter reading (black): 385, counter reading (color): 385, year of last overhaul: 1998, type of input current: three-phase, input current: 200 A, input voltage: 400 V, Equipment: documentation/manual, HEIDELBERG SPEEDMASTER SM 102-8-P OFFSET PRINTING PRESS 8 Colors + Perfecting 4+4 | CPC 1-04 | Autoplate | In Production Year: 1998 Impression Count: 359 Million Crodpfx Apoy Sg Dmepoc Availability: Immediate HIGH PERFORMANCE HEIDELBERG SPEEDMASTER 102-8-P AVAILABLE FOR IMMEDIATE SALE This well-maintained Heidelberg Speedmaster SM 102-8-P is currently visible in production and operating in Good condition. Equipped with advanced Heidelberg automation systems, this machine delivers high productivity, stable register accuracy, and premium print quality for commercial printing operations. The machine with complete NEW ink rollers and dampening rollers for all 8 printing units. Ideal for: • Commercial printing • Packaging printing • Magazine production • High-volume offset printing • Brochures, catalogs & advertising materials • International print production facilities TECHNICAL CONFIGURATION: • CP Tronic Control System • CPC 1-04 Ink Control • Alcolor Dampening System • Autoplate Semi-Automatic Plate Changing • Auto Blanket Wash • Autoregister • Electronic Double Sheet Control • Electronic Side Lay Control • High Pile Delivery • Sheet De-curler • Antistatic System • Steel Plate in Feeder & Delivery • Super Blue Package • Technotrans Refrigeration & Re-circulation • Weko Powder Spray MACHINE CONDITION: • Machine visible in production • Good mechanical condition • Full new ink rollers will be installed • Full new dampening rollers installed • Clean and professionally maintained dismantling, loading, and shipping assistance can be arranged. Contact us today for: Additional photos & videos Heidelberg SM 102, Heidelberg Speedmaster, 8 color 4+4 offset press, perfecting printing press, used Heidelberg printing machine, commercial printing press, Heidelberg CPC 1-04, offset printing machine , Heidelberg Autoplate, Heidelberg SM102-8P, industrial printing equipment, used offset press for sale, Heidelberg printing machinery, sheetfed offset press, Heidelberg printing machine