Used Pilz Electronic Module 11 Pieces for sale (37,210)

Condition: used, Measuring adapter for 3-phase consumers, active, 16 A, CEE 5-pole, BENNING · For three-phase consumers (active) Itodpfj Aaldpsx Ag Asn · For measuring RPE (residual current protective conductor) and IPE (protective earth conductor) under operating conditions (direct measurement) · Adapter with 400 V CEE socket/plug (5-pole) with release electronics and measuring signal cable for use with the ST 725 device tester, article no. 4000 828 856.

Condition: used, Hand cart with plywood sides, L945 x W545 mm, pneumatic tires, load capacity 400 kg. * Welded steel tube frame, powder-coated in brilliant blue, RAL 5007. * Railing 250 mm high, loading platform and walls made of water-resistant plywood. * 2-axle design. * Turntable steering. Itodpfxo Aaldie Ag Asn

Condition: used, Bolt-together shelving unit, H2500 x W1000 x D500 mm, add-on shelving, 6 steel shelves, load capacity 100 kg, galvanized steel. · For light loads · Surface galvanized Isde Aalbuopfx Ag Ajtn · Quick and easy screwless assembly · Modular design · Upright frame pre-assembled (clinched) · Continuous quality control

Condition: used, Wire rope sling, 3-leg, with oval ring and 3 eye hooks, L1000 x D16mm, SWL 4000 kg Itedpfxs Aalf He Ag Asn * 3-leg construction with oval ring and 3 eye hooks * Wire ropes are galvanized * Construction: 6 x 37 * Various load capacities through variable spreading angles * Load capacity specifications

Condition: used, up to serial number 08401938 Isdpfxj Aalxms Ag Astn

Condition: used, Desk Bela H650-850xW800xD800mm light gray, rectangular shape, C-leg * Height adjustable from 650-850 mm, in 10 mm increments * Sturdy metal side panels (similar to white aluminum, RAL 9006), powder-coated Itodpj Aaltwofx Ag Aen * Horizontal cable tray included, vertical cable management

Condition: used, for Ford 2910, 3910, 4110 Isdpfj Aallmjx Ag Aotn

Condition: used, Piston rod, Ø40 x 1648 Iteds Aal D Njpfx Ag Aen

Condition: used, - The double fork consists of two forks with an additional frame. - Hydraulically adjustable from 840 to 1250 mm. Itedpe Aal Eajfx Ag Aen - Standard equipment includes a 3-point linkage for rear or front hydraulics. - 2 single-acting hydraulic connections.

Condition: used, Table, total length 2000 mm, frame made of galvanized steel, 40 x 120 mm, pre-assembled. Tabletop made of spruce. · Frame: steel construction, hot-dip galvanized. · Tabletop: spruce, impregnated with a teak-colored stain. · Table length: 2000 mm. Itodpfe Aalwiox Ag Aon · Can be placed freely or screwed down (fastening material not included).

Condition: used, 21.83.02; 21.83.02; 365800 Isdpfxo Aalwvs Ag Aotn

Condition: used, Busatis double-knife mower (older model); for motor mowers; cutter bar painted blue. Ijdpfx Ago Aalk Ae Ajtn

Condition: used, Light roller conveyors, 440mm, 400mm, straight, 1m, steel rollers, 100mm * For transporting individual items by gravity (incline), with an inclination of approximately 2 - 5%, depending on the nature and weight of the conveyed material. * The bottom of the conveyed material may have longitudinal supports or circumferential ring strips, provided that they rest on the rollers. * Since the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. Itedpfxs Aal I Uo Ag Asn * This determines the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). * Support rollers: Plastic pipe, Ø 50 x 2.8 mm, ball-bearing mounted, steel pipe, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel pipe on request. * Curves: Inner radius 800 mm, support rollers are continuous or divided into multiple sections depending on the conveyor width. * ¹ Note: with a spacing of 75 mm, the following lengths are supplied: instead of 1000 mm – 975 mm, instead of 2000 mm – 1950 mm. Additional available axle distances: 62.5 mm, 125 mm, 150 mm and 200 mm. * Other technical specifications: Overall width: 440mm.

Condition: used, Puller 20-3+ with tensioning screw, T-slot 200 mm, width 250 mm, 8.5 t, KUKKO · Two-arm design · With quick adjustment · Made of high-quality tool steel · With knurled handwheel for quick loosening and repositioning of the puller hooks without a wrench · Optimal adjustment of the spindle to the shaft through a two-sided spindle tip (ball and point) Ijdpfx Ao Aamlneg Aetn Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical specifications: Weight: 7.05 kg · Material: High-quality tool steel

Condition: used, Bolt-together shelving unit, H2000 x W1000 x D500 mm, add-on shelving, 12 steel shelves, 32 x 8.16 x 9 · with shelf boxes · simple and quick bolt-together assembly with pre-assembled galvanized frames · Shelves are galvanized with reinforced box profile, H 25 mm, height-adjustable in 25 mm increments. Itodpj Aammxjfx Ag Ajn

Condition: used, Grid container, without flap, 4000 kg, L800 x W600 x H600 mm, painted mouse grey. Iedpfx Ags Aaiwms Aotn * Robust construction, galvanized or painted. * Corner posts and stacking pockets are made from a single piece. * The bottom, made of profiled sheet steel, is welded to an all-round angle steel. *

Condition: used, Heat protection jacket KA-3, size 56, silver, 1 piece, JUTEC · Certified according to DIN EN ISO 11612:2015 · Approximately 800 mm long with Velcro closure Itsdpfx Aj Aaiyzsg Aen · Base fabric: aluminized aramid, high resistance to creasing, high comfort · Short-term protection against sparks and flame exposure. Application: in foundries and the steel, aluminum, ceramics, and glass industries. · Other technical properties: Category III · Standard: EN 11612

Condition: used, Rotation direction: clockwise. Iedo Aai Dyspfx Ag Astn

Condition: used, Steel bottle pallet for 4 gas cylinders, bottle diameter 250 mm, galvanized, for forklifts. · Maximum storage capacity: 4 bottles, diameter 250 mm. · For the safe transport of 1 to 4 steel bottles using a forklift. · Allows the simultaneous transport of different types of gas cylinders, such as gases, carbon dioxide, etc. · Standard equipment includes mounting hooks for hoses and caps. · Hot-dip galvanized according to EN ISO 1461. Ijdpfx Ae Aai Hnjg Aotn

Condition: used, Tool holder assortment, 20 pieces, galvanized, for perforated boards. Includes 10 hooks, 5 various holders, and 5 tool clamps (BOTT). · 20 pieces · Other technical features: Design: 10 hooks / 5 various holders / 5 tool clamps. Itedpo Aai Ncefx Ag Ajn

Condition: used, Single open-end wrench 894, wrench size 80mm, length 645mm, steel gray, with hanging hole, GEDORE. * Surface: steel gray * With hanging hole, wrench head angle 15° * DIN 894 / ISO 3318 * Other technical features: length: 645mm * Surface: steel gray * Design: with hanging hole Itedpfs Aai H Ujx Ag Aen * Material: CV steel * Wrench head angle: 15°

Condition: used, Zeroing device, adjustment accuracy 0.01 mm, with lateral dial gauge · For reference point · With lateral dial gauge for quick and easy determination of the reference point in the axial direction · Made of hardened, non-rusting steel · Contact surface diameter: 47 mm Iedpe Aakhaefx Ag Ajtn · Application: The adjusting device is placed on the workpiece, and the tool (e.g., milling cutter) is moved onto the spring-loaded contact surface (the tool must not rotate) until the dial gauge reaches the zero point. At this point, the reference dimension of 50 mm to the workpiece has been reached. A safety travel of 0.5 mm is incorporated to allow for overtravel. · Other technical features: Design: with lateral dial gauge.

Condition: used, Set of ring spanners, 7mm, Form A, CV steel, GEDORE · CV steel Ijdpj Aakg Nsfx Ag Ajtn · Chrome-plated · With identical wrench sizes · Ring end angled at 15°, wrench opening at 15° DIN 3113 Form A / ISO 3318 / ISO 7738 · Further technical specifications: Maximum wrench size: 32mm · Material: CV steel · Standard: DIN 3113 Form A, ISO 3318, ISO 7738 · Minimum wrench size: 10mm

Condition: used, Screw-in shelving unit for office use, H2200 x W1000 x D300 mm, basic unit, powder-coated, light gray. · Design: Single-sided = 300 mm deep, double-sided = 600 mm deep. · Load capacity per shelf with evenly distributed load: 60 kg = 300 mm shelf depth, 90 kg = 600 mm shelf depth. · Iodj Aakm Nopfx Ag Ajtn

Condition: used, Socket set 8740 C HF 1, 9-piece, 1/2 inch, 4-17mm for internal hexagon screws, WERA · 12.5 mm (1/2") square drive · Hexagonal · CV steel · Further technical features: Contents: 9 pieces Iedpo Aaki Rofx Ag Aotn · Packaging: textile box