Used Powder Dissolver for sale (1,050)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Lasdpfx Aefz I Rxsm Nsa 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡 Lsdpfefzb Rcsx Am Nsaa

Condition: excellent (used), Here we offer a GRIESER tripod dissolver laboratory. Product: Grieser laboratory tripod dissolver Lodpfx Ajd Edm Som Njaa Type: GFD 11 LST Purpose: The machine is designed for mixing of powdery solids, liquids and pastes as well as to the work of fillers. The viscosity range can be from low viscosity to Pasty range. Machine design: The laboratory stand dissolver consists of machine frame, the Lifting device, the drive for mixing tool, the telescopic hood with Spring contact pressure, the Collet and the control panel (non-ex) with control and compact controller. The container (customer) and the telescopic hood form one in working position closed mixing room. The hood is intended, a hose connection It is used according to the purpose. The drive of the mixing tool with a speed adjustment is by means of Frequency converter fitted. The arrangement, performance and speed of the Motors are indicated in the enclosed drawing of the project. On the display of the compact controller can the speed of the mixing tool, the Mixing time / mixing time, mixing sequences, as well as other functions are displayed be. Operation Switching on and off is done via corresponding buttons in the control cabinet Lifting of the mixing tool drive Lifting is carried out of the hub motor is switched on. This runs only as long as the Push button (2-hand safety circuit on-on) is pressed. After releasing the button

Condition: good (used), Fire extinguisher, powder extinguisher -Fire classes: A, B and C -Chassis: with solid rubber tires and swivel caster Laedpfx Asb A I Ursm Nja -Nitrogen bottle -10 m high-pressure hose: with lockable extinguishing gun -Dimensions: 600/450/H1050 mm -Weight: 120 kg

Condition: good (used), Paint roller machine, roller coating machine, powder coating system Laedpfx Aogal Agom Nea -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg

Condition: refurbished (used), DL Packaging – Complete Powder Packaging Lines We build and install cost-efficient, hygienic, and accurate powder packaging lines. Our Second Life Machines offer the performance of new equipment at a fraction of the cost and with fast delivery. Why choose our powder solutions? • High automation for maximum output and minimal labor • High filling accuracy with sensors that adapt to product and environment • Easy access & fast cleaning for minimal downtime • Strong technical support and durable wear parts Lajdex Dbq Aspfx Am Nja Complete lines include: • SDX dosing system with custom auger screw • VFFS machine (pillow, block-bottom, doypack, stabilo bags) • Discharge conveyor, Turntables, • Cartoning/ Case packer solutions Suitable for powders from 5–30 kg (milk, coffee, spices, sugar, chemicals) with speeds up to 100 bags/min. DL Packaging – Reliable, hygienic and affordable powder packaging from A to Z.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ Laodpfjwfhu Hjx Am Nsa ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: new, Year of construction: 2025, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch Lsdpfx Asvv Rfdom Neaa COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET * OVERHEAD CONVEYOR AND LOAD TROLLEYS Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM The powder coating system is designed for powder coating applications with frequent color changes during the day. The equipment is on a wheeled stand for ease of operation. Powder coating is sucked directly from the powder box, which allows rapid color changes. The powder box is placed on the vibrating table, suction pipe fluidizes the powder coating in the box, ensuring effective mixing, and the powder coating is homogeneously sent to the gun through an injector placed on the suction pipe. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 55 Kg VG4 CONTROLLER AND MANUAL POWDER COATING GUN The VM manual powder coating gun is completely dismountable. The ergonomic gun handle design ensures ergonomic handling and does not tire the operator during coating application. The high voltage cascade has a long service life, its tightness prevents contact with dust and minimizes the risks in this area. The well-designed head assembly and nozzle ensure excellent polarization and homogeneous coating on surfaces during application. The electronic touch panel on the back of the gun provides ease of use during operation. The control unit is digital and allows precise adjustment of settings via the touch panel. TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Powder output (3,5 bar) 500 g/min Lasdjvv N Tyopfx Am Noa Protection class : IP 54 Voltage cable length : 5 m Powder hose length : 5 m Gun weight (gross) : 450 g Operating temperature :-20-50 ° C Nozzle :Flat jet or Ø16-20-24mm deflectör

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Laedpfjx H Tadsx Am Nea Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: used, Year of construction: 2014, ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ Ledpfx Amoiivq Uo Nsaa ✅Content of the facility ►1 piece - Gas-heated large powder furnace ►1 piece - Automatic powder coating booth ►1 Piece - Electrically Heated Small Powder Furnace ►1 piece - Manual monocyclone powder coating booth ►1 piece - room type monocyclone manual powder coating booth ►1 piece - Automatic chemical pre-treatment and drying system ►6 pieces - Automatic powder coating gun ►3 Pcs - Manual Powder Coating Gun ►1 piece - Automatic powder recovery unit ►5 pieces - monocyclone ►1 piece - Automatic control panel ►1 Piece - Automatic Rod Movement System Speed ​​Controlled ►2 Pieces - Movable Platform Speed ​​Controlled ►12 pieces - parking station ►300 m - conveyor rail ►12 pieces - hanging rods Our facility is located at Anhaltstrasse 30, 14943 Luckenwalde. You can make an appointment to view the machines. The system has been in use for 8 years. Since we are the direct manufacturer of the plant, we can make the changes you want to the machines by mutual agreement. It does not fit into your existing assembly space? Then we can make changes to the layout. Please check the system PDF file using the link below.

Condition: new, ⭐⭐⭐⭐⭐ Rated 5.0 – Trust the professionals! ⚡ Top service – Delivered super-fast – Great customer support! ⚡ ✈️ Delivery in just 4-6 weeks! ✈️ ✅ Energy efficiency class A+++ – Save on operating costs permanently! ✅ Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. 💸 Preserve liquidity – invest wisely! We offer flexible financing options such as leasing, hire purchase, or warranty packages so you can realize your investment without compromise. 📞 Contact us today – we will provide you with personalized, solution-oriented advice! Laedegf A Shjpfx Am Nsa ⏱️ FASTEST delivery time on the market – directly from the manufacturer! ✨ Benefit from our price and quality advantage ✨ Rely on 40 years of experience in surface coating technology 🔥 UML-LINE – Continuous curing ovens for powder coating and liquid paint 🟢 Optimized for automated systems 🟢 Continuous operation for maximum efficiency 🟢 Individually configurable – space-saving design 🟢 Minimal heat loss thanks to air curtains and air breakers 🟢 Heating system available: Gas | Diesel | Electric 🟢 Indirect heating – for maximum safety and perfect curing 🟢 Fast assembly thanks to modular design 🟢 Manufactured according to current EU standards for safety, insulation, and automation 🟢 Optionally with automatic doors (electric/pneumatic) 🟢 Ideal for step-by-step systems ☀️ 2-year warranty – quality you can rely on! Request a quote now and secure a production advantage! 🔧 Made by PROTON Maschinenbau GmbH – Quality that lasts.

Condition: new, Year of construction: 2024, total length: 4,000 mm, total width: 1,800 mm, warranty duration: 24 months, workpiece weight (max.): 1,500 kg, power: 62 kW (84.30 HP), temperature: 250 °C, heating capacity: 54 kW (73.42 HP), inner dimension length: 3,000 mm, inner dimension width: 1,500 mm, inner dimension height: 2,100 mm, filter area: 30 m², energy consumption: 62 kWh, insulation material: Steinwolle, insulation thickness: 150 mm, sheet thickness steel (max.): 3 mm, ⭐⭐⭐⭐⭐ (5.0) 36 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! 35-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅✅ Complete starter package - MidiPB powder systems LIST PRICE 32.770 € ⭐Offer price 31.000 € ZZZL. VAT. & SHIPPING*⭐ ►►Immediate purchase◄◄ ✳️Behalten Your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease purchase, warranty or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage! ➖➖➖➖➖ ☘️Umweltfreundlich☘️⚡️Grüne Energie⚡️☘️ Powder oven + powder booth + powder gun Includes everything you need to coat small parts such as wheel rims: - ELECLINE 15-3025 HARD OEN (electric) - BOOTHLINE-1500 FL SPRAY CABIN (with filter) - STRONG SMART MULTICOLOR POWDER COATING UNIT WITH SPARE PARTS - TRANSPORT TROLLEY FOR CURING OVEN ⭐ Powder oven with electric heating - ELECLINE 15-3025 ✔️ Internal dimensions : 3000 mm L * 1500 mm W * 1840 mm H net ✔️ Volume: 8,28m³ ✔️ Electrical heating capacity : 54 Kw/h ✔️ Recirculation air flow rate (ventilator) : 6,800 [M³/H] ✔️ Power output of the circulating air ventilator : 2.2 [KW/H] ✔️ Digital heat control Temperature infinitely variable up to 220°C ✔️ Sandwich panels Inside: 1 mm galvanized steel, outside: 1 mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Curing temperature, curing time and the function of the exhaust fan can be adjusted ✔️ An acoustic signal sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm rock wool. Walls: 140 mm (50 mm rock wool and 100 mm glass fiber) ✔️ Heating type: Indirect heating ⭐ Powder booth - BOOTHLINE1500 - FL ✔️ Internal dimensions : 1430 mm L * 1250 mm W * 1450 mm H ✔️ 3 Flanged polyester filter Ljdpfxorgq Epe Am Njaa ✔️ Ø325 * 1000 mm Filter dimensions. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder coating collection drawer ✔️ 360 degree rotatable and movable suspension device. ✔️ 1 STK 3 KW extraction fan - 5000 m3/h ⭐ Powder coating gun - STRONG SMART MULTICOLOR Coat effortlessly with all powder paints, coat complex geometries with outstanding efficiency and quality and do so in the most challenging environments. This paint gun set has a housing with a stronger and more stable structure. Do you want a special configuration ❗ Call us now❗ ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL ESPECIALLY FOR YOU.✅ ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️Wir have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️ Options (for oven, spray booth) available at extra cost. All machines are new, not used.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Shipping provided : 35-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ Complete Starter Pack - MiniPB €25,126 EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ Lasdpfsd S Nd Dsx Am Nsa ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ Powder Curing oven + Powder Coating Booth + Powder Coating spraygun Includes everything you need to coat small parts such as Rims needed: - ELECLINE 12-1519 CURING OVEN (electr.) - BOOTHLINE-1200 FL SPRAY CABIN (with filter) - STRONG SMART MULTICOLOR POWDER COATING EQUIPMENT WITH SPARE PARTS - TRANSPORT TROLLEY FOR CURING FURNACE ⭐ Powder oven with electric heating - ELECLINE 12-1519 ✔️ Internal dimensions: 1500 mm L * 1200 mm W * 1570 mm H ✔️ Volume: 2.9m³ ✔️ Electrical heating power: 18 Kw/h ✔️ Circulating air flow rate (fan) : 3,300 [M³/H] ✔️ Power of the circulating air fan: 0.75 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ⭐ Powder Coating booth – BOOTHLINE1200 - FL ✔️ Internal dimensions: 1130 mm L * 1250 mm W * 1450 mm H ✔️ 2 Flanged polyester filter ✔️ Ø325*1000mm filter dimensions. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder coating collection drawer ✔️ 360 degree rotatable and movable hanging device. ✔️ 1 PC 2.2 KW suction fan - 4500 m3/h ⭐ Powder Coating Gun - STRONG SMART MULTICOLOR Coat effortlessly with all powder colors, coat complex geometries with outstanding efficiency and quality, and do it in the most challenging environments. This paint gun set has a body with a stronger and more stable structure. Do you want a special configuration ❗ Call us now❗ ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅ ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ⭐⭐⭐⭐⭐ ✈️ 15-day delivery ✈️ Shipping available ✈️ ✅✅✅Energy class A+++ ✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ►►Buy now◄◄ ✳️ Maintain your cash flow! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST DELIVERY TIME❗ ⌛⏰►►► Ledpfofvqgkex Am Neaa The microprocessor-controlled motherboard and AOS (Automatic Optimization System), the innovative housing design, the easy-to-clean plastic container, the lightweight carrier, the 4-mode memory option, the RS485 Modbus communication, and the LED warning system for network errors provide users with an enhanced experience. The automatic optimization function ensures that operations are performed with optimal performance, while the robust structure and portability also stand out. The RS485 Modbus communication and the LED warning system increase system reliability through reliable data transmission and fast error detection. This integrated system, tailored to modern computing requirements, offers a solution that is both practical and powerful, ensuring compatibility with technology. ►Ergonomic body design ►Robust, explosion-proof trigger structure ►Nozzle types for various coating styles ►Injection-molded cascade structure with increased sealing IP 6x ►420 g. Easy to use due to its light weight ⚡️⚡️⚡️It is ATEX certified.⚡️⚡️⚡️ ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 2025, condition: new, ⭐⭐⭐⭐⭐ (5.0) 58 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ shipping : 30-days delivery ✈️ ✅✅✅Energy class A+++✅✅✅ EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. Laodjghf R Uepfx Am Nsa ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder oven with gas or diesel heating - BOXLINE 15-3025 ✔️Internal dimensions : 1500*3000*2100 ✔️External dimensions: 1780*4000*2500 ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow rate (fan) : 6,800 [M³/H] ✔️ Power of the circulating air fan: 2.2 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ✳️Functional principle✳️ This oven is intended for heating powder coated parts. The paint polymerizes at a temperature of around 200ºC (depending on the type of paint used) and forms a film on the surface of the metal. The temperature control in the oven is carried out by the control unit, which receives a signal from the temperature sensor in the oven. ✳️Oven Body✳️ The body of the polymerization furnace consists of heat-insulating panels that are inserted upright into each other and glued together with a heat-resistant sealant. Conveyor distances to the oven door channels can be left if desired. Optionally, it can be made with pivoting double doors. ✳️Heat exchanger✳️ The heat exchanger is installed in the side part of the polymerization furnace body. The internal structure and materials of the heat exchanger are designed in such a way that the temperature in the furnace can be increased to 230 ° C, and the temperature difference at various points is the allowable ones Heat exchanger manufactured from 3 mm. AISI310 Quality STAINLESS STEEL ✳️Circulation fan✳️ Air circulation in the oven is carried out by four circulation fans with insulated chassis. Blade air propellers are often used in circulation fans. ✳️Digital fully electronic temperature controller✳️ ✳️Exhaust fan✳️ It is used to suck in and blow out the gases produced during the polymerisation of the powder in the furnace. If necessary, the exhaust fan can work continuously after a certain period of time or turn on automatically from time to time. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️

Condition: new, 🚀 Modular powder coating systems with bar transport system Our modern painting systems with bar transfer systems offer maximum flexibility with minimal space and energy consumption. All process steps – from pretreatment to oven drying – can be carried out in a single, continuous line. 💡 Ideal for the following applications: Powder coating and wet painting Lsdpjdy Ezdjfx Am Njaa Sandblasting Chemical pretreatment Baking and cooling 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-operated Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic paint booths and walk-in booths The movement is fully automated with a continuously variable drive that enables precise control of cycle times. 🏗️ Structure & Components: Monorail conveyors for longitudinal movement Cross-guide units for direction changes Mobile carriages with product holders Load-bearing steel structure for continuous loads Control via control panel with speed control ⚙️ Efficiency through sophisticated design The system allows contactless handling – the workpiece is suspended at the loading station and remains in the same position until removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated bar lifting device enables ergonomic and safe working with heavy parts. Operators can precisely position the lifting bar at the push of a button (raising/lowering) – ideal for large components. ✅ Your benefits at a glance: Fully automated material flow For workpieces of any size and weight Reduced space requirements Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfect for modern coating processes where flexibility, ergonomics, and efficiency are paramount. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️ 25 day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! PLUS VAT. & SHIPPING ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. Ledpedhi Aaefx Am Noaa ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder booth – BOOTHLINE1200 - FL ✔️ Internal dimensions: 1130 mm L * 1250 mm W * 1450 mm H ✔️ 2 Flanged polyester filter ✔️ Ø325*1000mm filter dimensions. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder coating collection drawer ✔️ 360 degree rotatable and movable hanging device. ✔️ 1 PC 2.2 KW suction fan - 4500 m3/h ✔️Cab construction The powder booth is designed for manual application of the powder coating in an electrostatic field. The spray booth is made of powder-coated galvanized sheet iron. The interior and exterior of the cabin construction is coated with electrostatic powder paint [RAL 7024 MX - RAL 7047]. All parts of the powder booth are easily assembled with bolted connections and, if desired, easily disassembled. ✔️Suction system It is a system that prevents powder paint from leaking out of the booth and causing pollution when painting in the booth. The extraction system has been specially designed for each booth to ensure excellent extraction. Thanks to the suction system, the personnel applying powder coating are not affected by the paint. ✔️Filtration system The dust particles in the air extracted by the suction fans are held in the cab by fleece filters for long-lasting filtration, and filtered air is discharged from the exhaust stack. The filters separate the powder from the air by passing the powder/air mixture through the outside of the filter through a filter layer that keeps the dust and permeates the air. As filtration continues, dust accumulates outside the filter, increasing dust holding efficiency. The filter size is 330x1000, the surface is 9-10 m2. ✔️Powder recovery The powder paint applied in the booth is collected in the paint powder compartment at the bottom of the booth and can be reused manually. As an option, an automatic paint screen can be installed instead of the booth compartment. This screen collects the paint with the vibration motor from the booth and transfers it directly to the spray gun. ✔️Conveyor or suspension It can be integrated with bar transfer conveyor systems. In the models with eyelets, the product can be guided into the cabin with a suspension. Standard models feature a 360 degree rotating and articulating hanger. The price shown is for the smallest standard version. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗

Condition: new, fuel type: electric, tank capacity: 1,000 l, continuous power: 14 kW (19.03 HP), total length: 1,000 mm, total width: 1,000 mm, total height: 1,000 mm, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request. Fast delivery: Only 4 weeks after receipt of payment! ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ⭐ Powder furnace with electric heating - MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1000 mm H ✔️ External dimensions: 1500 mm L * 1300 mm W * 1900 mm H ✔️ Electric heating output: 12 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan output: 0.75 [kW/h] ✔️ Total 14 kW/h +- 10% ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels: Interior: 1.2 mm galvanized steel, exterior: 1.2 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function are adjustable ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 🔥 MATOVENB-101010 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-101010 is your reliable solution for professional drying and curing processes up to 230°C! 🌡️ 🚚 Maximum loading flexibility • Use with a mobile workpiece trolley possible • Optionally with a loading rack system for small batches Lasdpfswfpp Eox Am Nja ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process ♨️ Ramp heating mode (optional) Precisely control the temperature profile and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events 🛡️ Safety is our priority 🟢 Safety sensor to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume extraction via automatic venting ⚡ Customized energy and heating system 🔌 Selectable heating systems: Gas, Diesel, Electric, or Hybrid (two combined heating modes) (optional) 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! Request now – Make your business fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Mini-PB-MAT 3 is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! * Your net price for businesses: €25,180.00 * Powder booth filter included. * Brand new professional industrial product PROTON QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use! ✅ 100% European manufacturing – Not made in China, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder furnace + Powder booth + Powder gun + Curing furnace trolley Complete starter kit - ⭐ MiniPB-MAT3 ⭐ ⭐ Powder furnace with electric heating - MATOVENB-151824 ✔️ Internal dimensions: 2400 mm L * 1500 mm W * 1800 mm H ✔️ Electric heating capacity: 36 kW/h Laedpowc Epvsfx Am Nea ✔️ Fan: 3,000 m3/h 80 mm SS ✔️ Recirculation fan capacity: 1.5 kW/h ✔️ Total: 38 kW/h +- %10 ✔️ Digital heat control: Temperature continuously adjustable up to 220°C ✔️ Sandwich panels: Interior: 1.2 mm galvanized steel, exterior: 1.2 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function are adjustable ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 *Our powder coating ovens are suitable for a ceiling rail system. If you would like to use this option, please contact our sales department. The housing shape of ovens with ceiling rail differs slightly from the standard version. The ovens can be operated with a floor-mounted trolley or simultaneously with a ceiling rail system. ⭐ Powder Booth - MATBOOTH.FT-03 ✔️ Interior dimensions: 1500 mm L x 1200 mm D x 1450 mm - 2220 mm H ✔️ 3 polyester filters ✔️ Filter dimensions: 325 x 725 mm. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder recovery container: 30 litres ✔️ 360-degree rotating and movable suspension system. ✔️ 1 x 3 kW Extractor Fan – 3500 m3/h ✔️ Control Panel: 1 ✔️ Lighting ⭐ Powder Coating Gun – STRONG ELITE MULTICOLOR Effortlessly coat with all powder colors, coat complex geometries with outstanding efficiency and quality, and do so in the most challenging environments. Inquire now – Make your business fit for the future! ⭐ Follow us for new campaigns ⭐ ☀️ 2-YEAR WARRANTY ☀️

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ✅Twinline-MA Automatic Powder Coating Booth - Perfect Coating, Fast Color Change✅ The Twinline-MA powder coating booth from Proton Maschinenbau was developed for automatic and manual application in an electrostatic field and impresses with its efficiency, user-friendliness, and outstanding coating results. ✅Innovative design for quick cleaning: Thanks to the insulating PVC floor and the automatic floor cleaning system, dust accumulation is effectively prevented. The booth can be cleaned quickly and easily without entering – for maximum productivity with minimal effort. Lodpfx Asggyk Eom Neaa ✅Intelligent airflow for maximum efficiency: Fulair technology ensures targeted air extraction at the inlets and outlets. This prevents powder loss into the environment and guarantees ideal conditions in both manual and automatic coating areas. ✅Effective powder recovery: The monocyclone with a downstream filter system enables a high powder recovery rate. The filters are automatically cleaned using compressed air, significantly reducing maintenance requirements. ✅Robust and flexible construction: The booth construction is available in powder-coated steel, stainless steel, or entirely made of PVC. The solid construction with no moving parts ensures a long service life and low maintenance costs. ✅Fast integration, short installation time: Twinline-MA can be easily integrated into existing systems and minimizes downtime. All system components are optimally arranged and offer the operator easy access at all times – whether during operation, color changes, or maintenance work. With the Twinline-MA booth, you are investing in speed, quality, and reliability. Experience a modern powder coating system that sets standards! Inquire now – Make your company fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Free shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ LIST PRICE 36.435 € ►34.750 € EXCL. VAT INCL. SHIPPING◄ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder oven with electric heating - ELECLINE 12-1519 ✔️ Internal dimensions: 1500 mm L * 1200 mm W * 1570 mm H ✔️ Volume: 2.9m³ ✔️ Electrical heating power: 18 Kw/h ✔️ Circulating air flow rate (fan) : 3,300 [M³/H] ✔️ Power of the circulating air fan: 0.75 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ⭐ Powder booth – BOOTHLINE1200 - FL ✔️ Internal dimensions: 1130 mm L * 1250 mm W * 1450 mm H ✔️ 2 Flanged polyester filter ✔️ Ø325*1000mm filter dimensions. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder coating collection drawer ✔️ 360 degree rotatable and movable hanging device. ✔️ 1 PC 2.2 KW suction fan - 4500 m3/h ⭐ Powder Coating Gun - Strong Smart Multicolor Coat effortlessly with all powder colors, coat complex geometries with outstanding efficiency and quality, and do it in the most challenging environments. This paint gun set has a body with a stronger and more stable structure. ⭐ PAINT REMOVAL BASIN – BSK-1200-700*700 ✔️ Working dimensions (L/W/H): 1200 x 700 x 700 mm ✔️ External dimensions (L/W/H): 1450 x 950 x 1250 mm ✔️ Inside the tank is V4A stainless steel ✔️ Outside the tank: stainless steel. ✔️ Adjustable feet ✔️ Capacity: 832 liters ✔️ Electrical heating power: 22 Kw/h - 2 levels - Fast heating ✔️CE - certified ✔️ High-quality V4A stainless steel tubular heaters Laodeipv Nyspfx Am Noa ✔️ Industrial damper for easy lid opening and closing ✔️ Exit/outlet via ball valve ✔️ Digital control with temperature limiter and timer ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Year of construction: 2025, functionality: fully functional, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Price includes shipping within Germany – No additional shipping costs! ✈️ Fast delivery: Only 4 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Want to expand your business and enter the world of professional powder coating? Mini-PB-MAT is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! Laedov Rb E Dspfx Am Noa ✨THE UNBEATABLE OFFER – ONLY UNTIL THE END OF APRIL!✨ Instead of €25,500, now only €16,765 PLUS VAT. Take advantage of this limited-time offer before it's too late! * With an additional shipping fee of €750, we can ship throughout Europe. For other countries worldwide, please inquire about the shipping price difference. * Brand new, professional industrial product PROTON QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use! ✅ 100% European manufacturing – Not made from Chinese goods, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for more performance and flexibility! ✅ All spare parts included – Long-term use with no hidden additional costs! ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder furnace + powder booth + powder gun Complete starter kit - MiniPB-MAT ⭐ Powder furnace with electric heating ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1000 mm H ✔️ Electric heating output: 12 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan output: 0.75 [kW/h] ✔️ Total 14 kW/h +- %10 ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels: Interior: 1.2 mm galvanized steel, exterior: 1.2 mm powder-coated steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 ⭐ Powder booth ✔️ Interior dimensions: 1200 mm L * 1200 mm W * 1450 mm - 2220 mm H ✔️ 1 polyester filter ✔️ Filter dimensions: 325 x 725 mm. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder recovery container: 30 liters ✔️ 360-degree rotating and movable suspension system ✔️ 1 x 1.5 kW extraction fan - 2500 m3/h ✔️ Control panel: 1 ✔️ Lighting ⭐ Powder coating gun - STRONG ELITE MULTICOLOR Effortlessly coat with all powder colors, coat complex geometries with outstanding efficiency and quality, and do so in the most challenging environments. Inquire now - Prepare your business for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certifications for all our machines and ATEX certifications for the necessary machines.☀️ Options (for ovens, spray booths) are available for an additional charge. All equipment/machines are new and unused.

Condition: new, Year of construction: 2025, ✅ Get to know our fully automated powder coating systems for maximum production capacity! Professional powder coating is essential for making metal surfaces durable, corrosion-resistant, and visually appealing. If you want to coat large quantities in your company and achieve maximum efficiency, our fully automated powder coating systems are exactly the right choice. 🔧 Proton Maschinenbau GmbH offers you intelligent, fully integrated system solutions for economical and consistently high-quality production. _____ 🔍 Impressive technology – Our system technology at a glance: ✅ Spray pretreatment line in tunnel design ✅ Drying ovens (available in U-, M-, or L-shape) ✅ Fully automatic powder coating booth – PVC floor for easy cleaning and quick color changes – Housing options made of stainless steel, powder-coated sheet steel, or PVC – ATEX-certified lighting units – Pneumatic floor cleaning system ✅ Automatic painting robots (1-, 2-, or 3-axis models available) Ljdewbh Npspfx Am Noaa ✅ Automatic powder coating guns ✅ Central powder coating station ✅ Monocyclone jet pulse filter unit (adapted to booth size) ✅ Curing ovens (U-, M-, or L-shape available) ✅ Conveyor systems (single-line or Power & Free system) ✅ Central control panel with touchscreen (from 7" display size) _____ 🎨 Housing colors to suit your taste – at no extra charge! Our machines are available in two modern color options: Yellow-white or anthracite-white – tailored to your corporate design or aesthetic preferences. Our customers can choose between these two combinations at no extra cost. _____ 🎯 Why a powder coating system from Proton? ✔️ Modular and scalable as needed ✔️ Layout planning tailored to your location ✔️ Maximum automation through numerous options ✔️ Compliance with European standards (CE, ATEX) ✔️ Energy-efficient and low-maintenance _____ 💡 Configure your system now! Use our powder coating configurator on our website to put together your customized system. Once the configuration is complete, our engineering team will create a customized concept for your requirements. _____ Proton Maschinenbau GmbH – Powerful technology. High performance. Worldwide trust.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Mini-PB-MAT 4 is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! * Your net price for businesses: €26,830.00 * Powder booth filter included. * Brand new professional industrial product PROTON QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use! ✅ 100% European manufacturing – Not made in China, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for more performance and flexibility! Take advantage of this limited offer before it's too late! ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder furnace + powder booth + powder gun + transport cart for curing furnace Complete starter kit - ⭐ MiniPB-MAT4 ⭐ Laodpfxowc Ep Ao Am Nea ⭐ Powder furnace with electric heating - MATOVENB-151830 ✔️ Internal dimensions: 3000 mm L * 1500 mm W * 1800 mm H ✔️ Electric heating capacity: 42 kW/h ✔️ Fan: 3,000 m3/h 80mm SS ✔️ Recirculation fan power: 1.5 [kW/h] ✔️ Total 45 kW/h +- 10% ✔️ Digital heat control: Continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.2 mm galvanized steel, outside: 1.2 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function are adjustable ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 *Our powder coating ovens are suitable for a ceiling rail system. If you would like to use this option, please contact our sales department. The housing shape of the ovens with ceiling rail differs slightly from the standard version. The ovens can be operated with either a floor-mounted trolley or a ceiling rail system. ⭐ Powder Booth - MATBOOTH.FT-04 ✔️ Interior dimensions: 2600 mm L * 1800 mm D * 1450 mm - 2220 mm H ✔️ 4 polyester filters ✔️ Filter dimensions: Ø325 * 725 mm ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder recovery container: 30 LT ✔️ 360-degree rotating and movable suspension system ✔️ 1 x 3 kW Extractor Fan – 3500 m3/h ✔️ Control Panel: 1 ✔️ Lighting ⭐ Powder Coating Gun – STRONG ELITE MULTICOLOR Effortlessly coat with all powder colors, coat complex geometries with outstanding efficiency and quality, and do so in the most challenging environments. Inquire now – Make your business fit for the future! ⭐ Follow us for new campaigns ⭐ ☀️ 2-YEAR WARRANTY ☀️