Used Pressure-Resistant Agitator Tank for sale (25,444)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Iiedpfx Aezvddcjn Hef

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Ijdpfxozvc N Ro An Heif Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: used, Used agitated tank with insulation Previous application: Pharmaceuticals Item number: 10785 Volume: 300 liters Type: Standing on 4 castors Product-contact material: 1.4571 / AISI316 Design: with insulation Ijdpfx Anex Ewqds Hsif Operating pressure (as per nameplate): +0.5 bar Max. operating temperature: +95°C Tank dimensions: Manway: 410 mm Internal diameter: 700 mm External diameter: 800 mm Foot height: 870 mm Total height: 1700 mm Total width: 870 mm Total length: 950 mm Cylindrical height: 650 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet diameter: DN25 Distance from outlet to floor: 365 mm Propeller agitator Empty weight: 184 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Iedpezu Aw Sefx An Hoif Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Reverse osmosis plant. Inlet pressure: 3 bar. Capacity: 4 m³/h. Power: 34 kW. Maximum pressure: 55 bar. Equipped with Grundfos pumps, frame, stainless-steel piping, pretreatment system, tanks and control panel. Serial No.: 2005118. Iedpfxszvchas An Heif

Condition: new, Year of construction: 2026, Item: A-12068 (11137) Vertical tank 50m3 NEW tank: Capacity 50,000 L External dimensions: Diameter Ø 3000 mm, total height 8,400 mm. Vertical stainless steel tank, 5 units available for sale Conical top and bottom, bottom manhole, and stainless steel legs. AISI 304 or AISI 316 Can be delivered with optional insulation in trapezoidal plates and agitators. Iiodpfjy Aty Nox An Hsf

Condition: ready for operation (used), functionality: fully functional, tank capacity: 73 l, usable tank capacity: 50 l, total length: 1,200 mm, total width: 1,500 mm, total height: 2,000 mm, Process system for the production of creams, ointments, and suppository masses Design for foaming products The heated container is vacuum-resistant up to -1 bar and pressure-resistant up to 2.4 bar. TECHNICAL DETAILS Temperature range, container interior, max.: 95°C Jacket temperature, max.: 140°C Usable volume: 50 L Total volume: 73 L Minimum filling volume: 10 L Homogenizer Model: Brienz RF 112 M-2 Power: 4 kW Speed: max. 2,850 rpm Mixer/Scraper Gearbox: SEW FAF 37 Speed: max. 28 rpm Iiodpfszrfbbex An Hof MACHINE DETAILS Space requirement: 1,200 × 1,500 × 2,000 mm

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Iiedpfoyuu Scsx An Hef Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: good (used), Year of construction: 1980, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air receiver for oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver Ijdozt I I Tspfx An Hjif -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A Iedpfjzgck Njx An Hsif - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: new, operating pressure: 2,000 bar, high-pressure hose length: 10,000 mm, fuel: diesel, overall weight: 243 kg, warranty duration: 24 months, temperature: 80 °C, TECHNICAL DATA OF THE KARCHER HDS 8/20 D WASHER: Model: HDS 8/20 D Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Drive: DIESEL engine Pressing capacity (l/h): 800 Working pressure (bar/MPa): 200 Maximum water temperature (°C): 80 Fuel consumption (kg/h): 5.9 Fuel tank (l): 30 Weight (kg): 243 Dimensions (length x width x height) (mm): 1130 x 910 x 920 EQUIPMENT OF THE KARCHER HDS 8/20 D WASHER: Pressure gun: Karcher Professional !EasyForce Advance High-pressure hose: Karcher Professional - Longlife series 10M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock. 25° flat stream nozzle. Flat high-pressure stream with high surface efficiency and good dirt loosening force. RELIABLE | DURABLE | ERGONOMIC Economical diesel engine - independence from external power sources. Compliant with the requirements of the EU STAGE V emission standard. Electric start. Comfortable handle for easy maneuvering of the device. Durable frame protecting the device from damage. Possibility of transport by crane, e.g. on a construction site. Safety valve on the high-pressure pump and water filter. The water filter protects the pump from impurities in the water. Thanks to the operating parameters of 200 bar and 800 l/h flow, the device will cope well in all conditions, even the most difficult ones. Large, puncture-resistant wheels. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the life of all pump elements on the high-pressure side. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows 5x faster equipment change than a traditional thread system. Iedpjv Tafbsfx An Heif The device is completely new and factory-packed

Condition: excellent (used), Year of construction: 1990, Aurepa gas tank semi trailer for oxygen, nitrogen, argon cryogenic Technical Information: Working pressure: 3 bar Iodpfx Ansittfno Hjif Pump: yes Flowmeter: yes We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us via e-mail.

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Isdouy Ribjpfx An Hsif Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Condition: reconditioned (used), Year of construction: 2021, operating hours: 73 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, HAKO SCRUBMASTER B70 CL TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2021 with 73 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. A built-in battery charger and wheel drive simplify daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 650 Suction nozzle working width (mm): 950 Iedpfx Anszvd Ihj Hoif Theoretical capacity (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW disc brushes 330mm PPL 0.5 (2x) NEW 24V 500W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal fluid - FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (650mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Iiedpfx Anozvb E De Hef - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: good (used), Used pressure vessel with insulation on castors Item number: 10779 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: 0.5 bar Operating pressure sheath: 1.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 400mm Outer diameter: 830mm Height of rollers: 880mm Total height: 1720mm Total width: 1090mm Total length: 1090mm Materials Interior: 1.4571 / AISI316 Iiodjrl Rrtjpfx An Hof Outer parts: 1.4301 / AISI304 Equipment: Type plate: Yes Spout diameter: 25mm Distance drain to floor: 390mm Empty weight: 184Kg Rolling frame prepared for agitator

Condition: new, Year of construction: 2026, LUFT 1000 INVERTER Screw Compressor Set with 270 L Vertical Air Receiver and IZBERG N10S Refrigerated Air Dryer The set includes the LUFT 1000 INVERTER screw compressor, a 270 L vertical compressed air receiver with fittings, and the IZBERG N10S refrigerated air dryer. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Technical Specifications – LUFT 1000 INVERTER Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 1/2" Dimensions 810 × 610 × 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer Parameter Specification Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Pressure dew point 3°C Air flow rate 1,500 l/min Power consumption 0.58 kW Power supply 230 V Dimensions (D × W × H) 380 × 600 × 625 mm Weight 31 kg Refrigerant type and quantity R134a, 400 g Key Advantages of the 270 L CORMAK Pressure Vessel Professional pressure vessel construction – manufactured from high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliant with European safety and quality standards. Working pressure of 11 bar – suitable for most pneumatic systems, including applications with higher pressure requirements. Large 270 L capacity – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1 1/4", 2" and 1/2", allowing flexible connection to various compressed air systems. High-quality finish – durable anti-corrosion coating applied both inside and outside the tank. Space-saving vertical design – the vertical configuration helps save valuable floor space in the facility. Standard Equipment 5 connection ports – diameters: 1 1/4", 2", 1/2" Rating plate with CE marking UDT notified body identification number Complete technical documentation and pressure vessel certificate Internal and external anti-corrosion coating Tank Accessories 1 × 1/2" plug Pressure gauge + 1/2" adapter 1/2" tee fitting Iijdpsxazlrofx An Hef 1 1/4"–3/4" inlet/outlet connection 1/2" water drain valve Important Note The safety valve is not included with the tank accessories and must be purchased separately.

Condition: new, Year of construction: 2026, functionality: fully functional, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Iodpfx Asxbzbpen Hjif Key Features of the 500 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 500 Litres – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1¼", 2", and ½" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is designed for intensive use in industrial environments. The body is made from structural steel with a wall thickness of 4 mm, ensuring resistance to pressure up to 11 bar and long-lasting operation. All welds undergo strict quality control, and the tank’s surfaces are protected with an anti-corrosion coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 6 pcs – diameters 1¼", 2", ½" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2022, condition: used, Empty weight: 135 kg Serial number: 280517 Power supply: 400 V three-phase, 60 Hz (without neutral) Rated electrical power: 60 kW (max ~60.7 kW) Rated current: ~88.5 A Operating steam pressure: 7 bar Maximum allowable pressure: 8.5 bar Allowable steam temperature: up to 200 °C Listed weight: 135 kg Mounted on a metal frame with an overhead feed tank Punch-button emergency stop and control panel with indicator lights Connections with visible stainless steel braided hoses Additional marking on the enclosure: "CVE-80-2" Estimated footprint of the entire unit on the frame: ~120 × 90 × 200 cm (W × D × H) Visual condition: traces of surface corrosion on the bottom of the frame and a few scratches; appears to be in good overall condition Description generated using AI Online auction held following the closure of the Umiami research and development center in Villebon-sur-Yvette (91), which was dedicated to the development of plant-based food products under the "Swap Food" brand. This auction includes over 100 lots, notably featuring state-of-the-art laboratory and process development equipment: “Anton Paar” particle size analyzers and rheometers, a “Stable Micro Systems” texturometer, “Dohmeyer” cryogenic cabinets, “Hounö” and “Unox” ovens, a “Mettler Toledo” metal detector, an “Anritsu” checkweigher, "Sartorius" thermobalances, as well as numerous food preparation appliances, laboratory equipment, stainless steel furniture, shelving, computer equipment, and technical equipment. Auction organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Iedpozvb Irofx An Hjif Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 1993, condition: ready for operation (used), Various raw milk vessels and tanks connected to a valve cluster are available. 1) Volume: 25m³, Year of manufacture: 2014, Agitator: available. 2) 2x Ullmann tank storage system, Year of manufacture: 1993, Volume: 25500l, Max. operating temperature: 20°C, Operating pressure min./max.: -0.4bar/0.4bar, Agitator: available. 3) Raw milk tank, Volume: 14000l, Agitator: available. 4) Raw milk tank valve cluster. Documentation available. An on-site inspection is possible. Iodpfx Asznx H Aen Hoif

Condition: good (used), Year of construction: 1989, Equipment: type plate available, Used stainless steel container Last use: Pharmacy Item number:10821 Volume: 20000L Operating pressure: Atmospheric Max. Operating temperature: +80 °C Type: horizontal on 4 feet Material (wetted parts): 1.4301 / AISI 304 Design: single-walled Tank dimensions: Cyl. height: 4500mm Total height: Approx. 3100mm Height of the feet: 970mm Outer diameter: 2500mm Total width: 2750mm Total length: 4600mm materials: Interior: 1.4301 / AISI 304 Iodpfxjth Shqe An Hoif Outside: 1.4301 / AISI 304 Equipment: Manhole: 440 x 340mm Type plate: yes

Condition: new, Year of construction: 2026, functionality: fully functional, The pressure container is used in the pneumatic control system of various devices and is used to suppress the pulsation of compressed air in the system, securing the optimal mode of compressor work, partial removal of moisture and oil from compressed air, creating its reserve. Isdpfxjv Axzme An Hsif Characteristics of the 1000l pressure tank A compressed air pressure tank is a cylindrical pressure device consisting of two ellipsoidal bottoms, a jacket with nozzles and valves. Its main function is to dampen pulsations in the compressed air system, which contributes to the optimal operation of the compressor and helps to eliminate moisture and oil from the compressed air. High-quality pressure tanks are particularly suitable for difficult working conditions. Our pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a solid and capacious device, ideal for storing compressed air and other gases under high pressure. It is designed to withstand high pressure and guarantee safe storage of gas. This tank is used in various industries, such as industry, construction, automotive or home workshops. It can be easily connected to an air compressor or other devices generating compressed air, providing a reliable source of gas in production processes and utility applications. With a capacity of 1000 liters, this tank allows for longer periods of operation without the need for frequent refilling. The pressure of 11 bar means that the tank is able to store gas at high pressure, which is extremely useful in applications requiring higher power. Our 11 bar 1000 L pressure tank is solidly made of high-quality materials, which guarantees its durability and safety. It also has appropriate valves and safeguards that prevent leaks and maintain a safe pressure level. What's more, our tank is supplied with complete documentation, passports, certificates and approvals, including information on the materials used in the production process. It has also passed the inspection by the Notified Body of the Office of Technical Inspection. It is marked with a nameplate with the CE symbol and the number of the Notified Body UDT. To sum up, the pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a reliable device that allows the storage of compressed air or other gases at high pressure. Its versatile use makes it a permanent source of gas for various industrial or utility applications. Our offer includes a wide selection of pressure tanks of various capacities, which makes it easy to adapt the model to the specific needs of the installation in a given plant. Our tanks are made of durable steel with increased pressure resistance and covered with a properly prepared paint on both the inside and outside. Models are available for both vertical and horizontal installation, which allows for flexible adjustment to a specific situation. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg) 230.00 Connections 8 Connection size 1/2", 2" Size 222.7 x 85 cm Tank capacity (l) 1000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 850 Height (mm) 2250 Manufacturer: Cormak

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Iiodpfxjzvfbcs An Hof Condition Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 Iodpfxjzi Dbhs An Hsif YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Iodpfx Anoxby D As Hsif Internal and External Anti-Corrosion Coating