Used Printers From Bcs Autobox for sale (28,167)

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Gjdpfx Aijzhlr Eoxska Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Plant from spiral freezer. Gkodpfxsvvm Afs Aixoa

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Gkedpfx Aiorq Eawoxea

Condition: excellent (used), 3 x 4 trolley retorts from recently closed UK Babyfoods factory. 1300mm models. Complete with trolleys and baskets for cooking / pasteurising pouches. We have the complete contents of this factory available. Gsdpfoy I Dh Isx Aixjka

Condition: excellent (used), Small ice cube factory currently situated within national football stadium. This system was designed to supply ice for the national football stadium. We do not have any documentation currently but think it consists of 4 x 1000Kg Ziegra units set up as two double ice machines each dropping in to two mobile hoppers. The system is in excellent condition as it was only used for a short time before it was apparent that it was easier to buy the ice in and have it delivered direct to each catering outlet in the stadium. The machines are badged Williams Refrigeration (the supplier) and Manitowok but look like they are Ziegra units. Gedpetpc T Ssfx Aixeka

Condition: excellent (used), Large selection of nice conveying direct from closed cheese factory. Gedpfeycm D Hex Aixeka

Condition: good (used), functionality: fully functional, machine/vehicle number: D30423, operating hours: 3,136 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 240 V, input current: 7 A, input frequency: 50 Hz, feed length X-axis: 355 mm, feed length Y-axis: 355 mm, feed length Z-axis: 254 mm, The machine is being sold due to a restructuring of our machine park and is immediately ready for use. The scope of delivery also includes various residual materials, so the printer can be used immediately after commissioning. We will gladly provide further information about the accessories and included materials upon request. Gkjdpfx Aiozh Nayoxoa

Condition: good (used), German RepRap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical specifications: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s XY precision: +/- 0.05 mm Max. volume: 500 × 400 × 450 mm Power: 230 V AC, 50 Hz, 10 A, 2.3 kW Other features: Touchscreen Condition: used Scope of delivery: (See pictures) + Filament spools (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not included! A license for the current software required to operate the printer must be purchased separately by the customer (approx. 200 euros for Simplify3D)! (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Gkjdpfjzg Tz Esx Aixja

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Gksdpfx Ajzg Tzlsixsa Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, HP Indigo Press 7800 The machine is in excellent condition, still installed, and currently in operation. It can be inspected under production conditions by appointment. According to the current owner, there are no outstanding technical issues, and the machine is fully up to date. Machine details: Manufacturer: HP Indigo Model: HP Indigo Press 7800 Serial number: IL 47000146 Year of manufacture: February 2015 Impression counter: approx. 19.7 million impressions, as of June 2025 Number of authorized colors: 7 Number of installed colors: 7 White ink authorized: Yes Machine still in production: Yes Availability: immediately, but not urgent Configuration and features: • 7-color configuration • White ink authorized • Thick substrate kit • One-Shot technology • Inline spectrophotometer • OFIR kit • Spare Ink Tank S3 • Chiller unit • UPS system • HP service contract • HP Production Pro for Indigo IN100T Digital Front End Hardware • HP Indigo Z4 G4 2133 V2 Control PC • HP Software Version 16.2.2 Technical and optical condition: Gedpfx Ajzacdweixoka The machine is reported to be in very good condition. According to the seller, there are currently no outstanding technical issues. The machine is fully maintained and up to date. In 2023, the entire material path was renewed/replaced, from the feeder to the stacker. This is a very important value factor, as the material transport section is one of the most relevant areas for stable and reliable production.

Condition: ready for operation (used), Innotech ZGW F25 final assembly workstation, assembly station, workstation, workbench Hermes A4L label printer UV light Magnifier lamp PC, monitor, keyboard You are welcome to visit for an inspection. We are happy to organise affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided that a valid VAT ID number is supplied. Gsdpfx Asx Hwcisixjka Subject to prior sale. Visit our shop and have a look at our other offers as well. All mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the item's description may occur and are reserved.

Condition: used, Stratasys Objet Objet30 Prime V3 + Cleaning Glovebox Technical specifications: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Model materials: Transparent, rigid (VeroClear) Rigid, opaque, white (VeroWhitePlus) Rigid, opaque, blue (VeroBlue) Rigid, opaque, black (VeroBlack) Rigid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: used Gedpfxszgcqce Aixska Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: good (used), functionality: fully functional, Year of construction: 2014, overall weight: 41 kg, Technical Specifications: Build Volume: 30.5 L x 30.5 W x 45.7 H cm [12.0 L x 12.0 W x 18.0 H in] Layer Resolution: 100 microns [0.0039 in] Filament Diameter: 1.75 mm [0.069 in] Print Chamber: Enclosed and heated build chamber Connectivity: USB, Ethernet, Wi-Fi Condition Details: Usage Details: Used for small parts and prototypes. Printer's extruded filament readings may show inaccuracies. Gksdpfxsqy E N Ss Aixea Overall Condition: Expected wear from use, few scratches, and dust due to infrequent use. Well-maintained. Included in the Kit: MakerBot Replicator Z18 3D Printer On-board Camera for Print Monitoring Swappable MakerBot Smart Extruder+ MakerBot Large PLA Filament (Various Sizes) Intuitive Display, Dial, Assisted Leveling Condition Note: Company-used printer, always stored in optimal conditions.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 268 h, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, power: 0.6 kW (0.82 HP), We offer this used Zaxe Z3 3D printer, manufactured in 2024. Product name: Zaxe Z3 3D Printer Input voltage: 100 - 120 V and 200 - 240 V Input current: 12 A and 7.5 A Gedpfszhtilex Aixoka Frequency: 50 - 60 Hz Power: 600 W Printing time: 268 hours If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Xerox / Fiery EX-P 6 controller for the Xerox Iridesse. Tested and in good working condition. Gkodpfx Aiexyv Nxexoa All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo.

Condition: used, Year of construction: 2020, machine/vehicle number: 3771695093, Xerox Primelink C9070 This is a Xerox Primelink C9070 production copier in very good condition. Counter: 274K (166K B&W / 107K color) Technical specifications: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is now one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics into every level of our business, we offer our customers high-performance products at competitive prices. Why do our customers choose CM Solutions? - 30 years of international experience in over 50 countries - 20 brands of machines: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta… - A large stock of 2000 copiers available immediately - A team of qualified technicians Gjdpfjwhprfsx Aixeka Do not hesitate to contact us for more information.

Condition: used, For sale is a mixer motor from YTRON. It is the AF 132M/4C-11 model. Gjdpfxoga Dy Ue Aixoka RPM: 1450 V: 480 kW: 9 Connection: DN150 Further data can be found on the nameplate.

Year of construction: 1997, condition: ready for operation (used), For sale is a mixer motor from YTRON. It is model Y 18.00 - 8.4 / T 10 - IV. The year of manufacture is 1997. RPM: 1375 Voltage: 380 - 420 Power: 18 kW Connection: DN150 Gkodpfjga Dznjx Aixoa Further data can be found in the data sheet.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool Gkjdezhr Rhepfx Aixsa - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: used, The item comes with a selection of spare parts, including: bellows segments, graphite sheets, capacitor transmitters, centering rings in various sizes, Pirani transmitters, inline valves, various cables, and more. Gksdpfx Aiezgv R Nexja

Condition: excellent (used), 3D systems Type: DT60 Print volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in Z-axis: 1.25 microns Precision in X and Y-axis: 7.5 microns Max. extruder temperature: 500 °C Max. build chamber temperature: 120 °C Nozzle diameter: 0.6 mm Other available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7" LCD touchscreen Remote monitoring Industry 4.0 compatible: WiFi, Ethernet, HotSpot, USB MMS system - Modular Maintenance System Dual filament loading Automatic filament change Heated feeder Gkedpfx Aozd Tugeixsa Jam detection Sensor for detecting filament end Print recovery system Liquid cooling Double-tempered glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) (Sale from location!) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Replaceable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5 m/s Large line detection: 25 m/s Build volume: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) Gjdpfszd Tt Aox Aixeka We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Gkjdpozd Tllsfx Aixja Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Arburg Type: Arburg Freeformer 300-3X Gkjdpfezd Tiwjx Aixoa Additive manufacturing of complex functional components With high-temperature option The new, larger freeformer 300-3X processes three components in ARBURG's freeforming process (AKF) and enables – for the first time worldwide – the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation "300" refers to the available component carrier area in square centimeters. Compared to the freeformer 200-3X, the build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters. "3X" always refers to the three axes of the component carrier that can move in the x, y, and z directions. For additive manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Stratasys Type: Stratasys 3D printer, PolyJet printer J750 Objet Stratasys 3D printer With the Stratasys J750 3D printers, you can optimize and streamline the process of manufacturing models from various materials with a single build platform in the same print job. During the design phase, the J750 3D printer (with CAD software) can be used to assign colors to components of a model. The model can then be saved as a VRML file and printed with the desired colors. The Stratasys J750 3D printer has a build volume of 490 mm × 390 mm × 200 mm (19.3 x 15.35 x 7.8 in). AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 220–240 VAC, 50–60 Hz, 7 A, single-phase Materials Agilus30 family Gedpfszd Tf Eex Aixeka Digital ABS Plus Tango Transparent Vero family Veroflex VeroUltra Opaque SUP705, SUP706 support material Applications Rapid prototyping Concept models Medical models Tools and fixtures Colored textures Total printing time on the machine is approximately 1483 hours. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.