Used Proton Bar Transferred Conveyor Systems for sale (48,060)

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Duedpoxcvzajfx Ad Net Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22023.0202.1000, Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt upper edge adjustable from 980 to 1080 mm Undercarriage made of robust box section profiles Design in stainless steel, material 1.4301 Knife edge on both sides, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor, make: SEW, included Food-safe coating (depending on lead time) Speed adjustable via frequency converter (between 0.8 - 8 m/min) Including adjustment frame for 5 dispensers by Viscotec Adjustment is primarily via profiles and clamping units Height adjustment carried out manually via clamping units, all dispensers are adjusted simultaneously. Fine adjustment of the dispensers can be carried out individually via elongated holes, if necessary. Each dispenser can be adjusted laterally, in inclination, and in/conveying direction independently. Without side guides Includes engineering Pre-assembly included Installation of dispenser included at our facility In-house testing included Surface: Conveyor in stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units made of aluminum 5 bars are transferred from an existing conveyor system onto our conveyor belt Control cabinet made of stainless steel 1.4301 Control and frequency converter by Mitsubishi Electric Configuration: Main switch, emergency stop switch, automatic on/off buttons Display for setting speed in m/min and adjusting the delay time for the dispenser start signal Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only for our own machine. Including control cabinet construction with 50% spare capacity Including high-grade sensors (distance photoelectric sensors capable of measuring and evaluating distance) Including high-end control (hardware and software can be expanded at any time without the need to replace the controller) Including HMI (display), approx. 7" size Including E-Plan Dsdpjxch D Hjfx Ad Neut Including program Including in-house test (interface test with Viscotec) Surface: control cabinet fully in stainless steel, sensors in stainless steel and FDA-approved.

Condition: excellent (used), The multi-flexible plastic chain conveyor systems with aluminium guide profiles enable horizontal and vertical distribution of products. Quantity: 600 m Djdpfjf D Hfmox Ad Nout In different sizes, We also build customer-specific length sizes !

Condition: good (used), Size: Length: 12500 mm Width: 350 mm Dsdpfxoh Rmrns Ad Nsut several pieces in stock

Condition: excellent (used), Several pieces in stock, Size: 12500mm to 13200mm Width: 82mm Dodpfxeh Rmt Ns Ad Neut

Condition: excellent (used), Size: 25000mm Width: 82mm Djdpfxoh Rmthj Ad Nsut

Condition: new, A mass production washing machine where parts are transported by hanger conveyor and washed by passing through tunnels. Washing is done by spraying or immersion ultrasonic dipping. Working Principle: Parts are transferred by hanging on to the hooks of the top loading conveyor belt. General process cycle: Washing - Rinsing - Optionally Ultrasonic Immersion Washing - Drying All of the HANGWASHes are tailor-made and have lots of options depending on your needs. Doded I E Itepfx Ad Njut Please feel free ot contact with us for further information.

Condition: new, Year of construction: 2026, Diesel Generator Set 150 kVA Generator Type: P150SSF Condition: New, 2026 Application: stationary Engine: Perkins 1106A-70TG2 Alternator: Leroy Somer LSA 44.3 L12 Power Output: 150 kVA / 120 kW Nominal Voltage: 230/400 V Nominal Frequency: 50 Hz Dodpfxsffwlqj Ad Nout Speed Regulation: electronic Voltage Regulation: electronic (AVR D350) Soundproofed (approx. 72 dB/7m), weatherproof Incl. control panel Control voltage: 12VDC Network type: TN-C Incl. control panel Incl. batteries (2 x 110Ah) Incl. integrated fuel tank (500 L) Incl. integrated drip tray for fuel and engine fluids Incl. documentation/manual Incl. circuit breaker (ABB, 4P) Dimensions: 365x125x200 cm (LxWxH) Dry weight: 3280 kg Optional: Automatic transfer switch package – emergency power supply Socket outlet kits GSM-based remote control Contact us, we will be happy to advise you. Please send all inquiries about our offers BY EMAIL first and leave your contact details; we will respond as soon as possible.

Condition: new, Year of construction: 2026, overall weight: 3,900 kg, fuel type: diesel, tank capacity: 600 l, color: dark red, power: 2,000 kW (2,719.24 HP), output current: 360 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 200 kW (271.92 HP), nominal power (apparent): 250 kVA, continuous power: 200 kW (271.92 HP), continuous power (apparent): 250 kVA, total length: 4,000 mm, total width: 1,450 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Diesel Generator Set 250 kVA Aggregate Type: P250SSF Condition: New, 2026 Engine: Perkins 1206A-E70TAG2 Dujdpefxlddjfx Ad Not Generator: Leroy Somer LSA 46.3 M7 Rated Power (Standby Power/ESP): 275 kVA/ 220 kW Rated Power (Prime/PRP): 250 kVA/ 200 kW Rated Power (Continuous/COP): 200 kVA/ 160 kW Rated Voltage: 230/400 V Rated Frequency: 50 Hz Control Voltage: 12VDC Speed Regulation: Electronic Voltage Regulation: Electronic (AVR) Sound insulated, weatherproof Network System: TN-C Includes control panel Includes batteries (2 x 110Ah) Includes integrated fuel tank (600 L) Includes integrated bund for fuel and engine fluids Includes circuit breaker (ABB, 4P) Includes documentation/manual Includes wiring diagram Warranty: 12 months or 2,000 operating hours, whichever comes first. You can configure your generator individually with us and order various customization options: - Socket package 16A – 125A with residual current device (all-current sensitive) - Remote control - Insulation monitoring - Enhanced sound insulation (down to 65 dB/7 m possible) - Fully automatic standby power system with automatic mains-generator transfer available on request - Grid parallel operation with load sharing and peak load (ComAP IG 1000 controller, VDE 4510 certified) - CHP configuration - Emergency power unit version for indoor installation with air ducts, ventilation, etc. Made in Germany Nationwide delivery available at extra cost. Contact us via email or call us – we’ll be happy to advise you and provide a non-binding quote.

Condition: new, Year of construction: 2024, overall weight: 5,250 kg, fuel type: diesel, tank capacity: 800 l, color: red, power: 400 kW (543.85 HP), output current: 720 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 440 kW (598.23 HP), nominal power (apparent): 500 kVA, total length: 4,450 mm, total width: 1,600 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: DOOSAN, type of cooling: water, Diesel generator set 500 kVA Genset type: D500SXF Condition: New, 2024 Application: stationary Emission stage: unregulated Engine: Doosan DP158LD Generator: Meccalte ECO40-3S/4 Standby power (ESP): 550kVA/ 440 kW Prime power (PRP): 500 kVA/ 400 kW Continuous output (COP): 30 - 80% of the prime output Nominal voltage: 230/400 V Nominal frequency: 50 Hz Speed control: electrical Voltage regulation: electrical (AVR DER1) Soundproof (approx. 78 dB/ 7m, can be reduced to 55 dB at an extra charge), weatherproof Control voltage: 24VDC Mains form: TN-C Incl. control unit Incl. batteries (2 x 110Ah) Incl. integrated fuel tank (800 L) Incl. integrated drip tray for fuel and engine fluids Incl. documentation/manual Incl. circuit breaker (ABB, 4P) with undervoltage release Dimensions: 450x160x240cm LxWxH Dry weight: approx. 5,550 kg Running time of the fuel tank: - approx. 8 hours at 100% load 500 kVA, Consumption approx. 100 l/h - approx. 11 hours at 75% load 375 kVA, Consumption approx. 72 l/h - approx. 17 hours at 50% load 250 kVA, Consumption approx. 47L/hr. Warranty: 12 months or 2000 operating hours, whichever occurs first. You can configure your genset individually with us and order numerous individual options: - Socket outlet package 16A - 125A with RCD (all-current sensitive) - Remote control, - Insulation monitoring Dsdsfn Efxjpfx Ad Njut - Extended sound insulation, up to 55 dB/ 7m possible) - Fully automatic emergency power system with automatic mains/generator switchover available on request. - Mains parallel operation with load sharing and peak load (ComAP IG 1000 control unit VDE 4510 certified) - CHP version - NEA for indoor installation with air ducts, ventilation, etc. The pictures show a standard series unit with the corresponding output from our own production, completely ready for operation. Delivery nationwide possible for an extra charge. Contact us by e-mail or give us a call, we will be happy to advise you and make you a non-binding offer.

Condition: ready for operation (used), Accu-Sort-Systems 45L Laser Barcode Scanner, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Djdpsi D Ttdjfx Ad Nsut

Condition: used, Year of construction: 2019, Vitronic Barcode Scanner RA1941 Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 Duodpfjk Abl Esx Ad Njt LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019

Condition: excellent (used), Year of construction: 2009, Conveyor belt M Fordersysteme (79) angled, vertical length 1.30 m, horizontal length 2.55 m, belt width 0.4 m, height 0.9 m (adjustable), crossbar height 2 cm, 2009 Dujdpsyzgzkjfx Ad Net

Year of construction: 2024, condition: new, Return System Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the edgebander. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Optional: "RTS Compact Ergonomics Package" available. A lift table and air cushion table are used at the end of the return conveyor. This option enables ergonomic operation. - Compatible with edgebanders from all manufacturers Djdpfx Aow Nadmsd Njut - Allows single-operator control of the edgebander - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 day - Turning device for small parts - With conveyor belt L 4500 x W 800 mm Single-track roller rail RTS Compact control, optional control box Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2019, Vitronic Barcode Scanner with framework and additional PC RA1970 Manufacturer: Vitronic Components: with Item framework, fully mounted Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019 Currently an error in the channel, as the connection to the other machine does not exist. But can be solved by technical support Dodpok Abn Dofx Ad Njut Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg

Condition: ready for operation (used), A 2-station party keg filler small keg filler Esau & Hüber is available. Filling capacity: 300/h, keg size: 5l, filling positions: 2. An on-site inspection is possible. Dedpfox R Dt Nox Ad Neut

Year of construction: 2021, operating hours: 9,000 h, condition: used, machine/vehicle number: 2202417-258, We offer a used Barbaric LCV loading system. Type: Beschickung LCV Year of manufacture: 2021 Load capacity at -0.6 bar: 200 kg Feeding system with 3 infeed/loading positions. Total length of working traverses: 17 m. Serial number: 2202417-258. Transport at buyer’s responsibility. Dujdsyi Akiepfx Ad Not If you have any questions or require additional information, please feel free to contact us by email.

Condition: good (used), Year of construction: 2012, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Mosca, belt conveyor with adjustable base from GF strapping machine -Speed: frequency controlled, up to approx. 94 m/min -Strap width: 500 mm Dusdpeq Ei Dqjfx Ad Nst -Conveying length: 1000 mm -Drive: SEW-Eurodrive 0.55/0.055 kW, see photo of nameplate -Light barrier: 2 sensors, distance adjustable see photos -Quantity: 1x conveyor belt available -Transport dimensions: 1020/960/H900 mm -Weight: 88kg

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) Dujdpfxsf A D Nms Ad Nst - External mini-pneumatic oil separator

Year of construction: 2017, condition: used, Used machine Duedpex Rpgbjfx Ad Not Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Condition: used, dr. wiesner Type: INTEGRA DDV -1...1 bar Product description: dr. wiesner Integra leak test system The classic - for all common test procedures The leak test system for industrial leak-tightness and flow tests Dodpfx Ajwqm Ddsd Njut with fully graphical color display up to three independent test circuits operable 255 test programs can be stored automatic process optimization autoTune (option) communication via flexibly exchangeable bus coupling modules freely programmable fixture control freely programmable special test procedures The device is suitable for tests according to the relative and differential pressure method with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) pneumatic: clean and dry compressed air max. 7 bar (to connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) pneumatic: Connection test object (Test) Connection reference circuit (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data, information reserved!) We are happy to answer further questions by phone.

Condition: ready for operation (used), belt conveyor for chips and wood waste and bark functional Dujdpfx Adjpkzwmo Net length approx. 3500mm width approx. 400mm BEVI motor 2,2 kW, 400 V

Year of construction: 2024, condition: as good as new (ex-display), Manual cleaning is carried out with special gloves in the front part. The effectiveness of the cleaning is guaranteed by a high-pressure pump and a special spray nozzle. Dusdpfof A Nq Asx Ad Nst In these units a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1- 80 bar. Technical data: Working surface: 950 x 700mm Interior height: 450 mm Load capacity: 70 kg Optional up to 150kg Spray pressure: 1-80 bar adjustable Tank capacity: 75 litres / heating capacity 2kW Basic version: - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Upward opening flap with 2 reach-throughs and gloves - Toughened glass pane - Door opening/closing system supported by gas pressure springs - Monitoring of the door opening by means of safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Cartridge filter in stainless steel with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Dodpfx Aewzimced Nsut Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Engine Model: Volvo Penta TAD 520 GE Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM:1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Cooling: Water-cooled Control Panel: Integrated Condition: Used, in good working order Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Ready for inspection and immediate dispatch Photos available upon request.

Condition: used, functionality: limited functionality, Year of construction: 2013, SLA IPro 8000 3D Printer Year 2013 In need of a full service, Has recently been turned on to drain the resin from the tank. Selling machine ex works, Sold as seen. 1 owner from new. RRP £250,000. I have another Ipro 8000 Machine available Year 2017. Both can be sold together as a package or sold for spare parts. Duodpfx Asyu Uxiod Net Machines can be inspected in Tadley Reading.