Used Prozap Ek0 Bushing Assembly for sale (4,101)

Condition: good (used), Year of construction: 2009, functionality: fully functional, Complete Corali automatic pallet production line. The automatic setup for fast changeover enables top efficiency even with small production runs. Machine Is in use and operational. The production line is ideal for manufacturing products such as paper and paperboard pallets—or other pallets—where fast setup changes are crucial for competitiveness and efficiency. Nledpjy Exvnsfx Agrog Facts about the line - Deck nailing unit - Leg nailing unit - Assembly unit - Foiling unit, 6 rolls - Ink printing unit - Fast change setting, change over time about 5 min. - Minimum production series up from 15 pcs - Capacity approximately 1800 pcs / shift - Pallet sizes min. 530x530mm, Max 1500x1250mm - Wooden blocks / two block cutting saws and convoyer - Compressed blocks can be loaded manually - Closed and open deck pallets - 2 operators - Corner cutting saw - Robot stacking, - Binding of the stack - Possibility to feed previously manufactured covers to the production line - Manuals both in written and as files - Year of manufacture 2009 The pallet line has been dismantled and thoroughly documented. It is currently stored in Southern Finland. The company that dismantled and documented the line is available for on-site reassembly if needed.The line will be sold as a single wholeness.

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 01/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 18-inch TWIN-MONOTUBE-DESIGN rims, satin matte black * MAN TGE raised suspension * Hill start assist * Exhaust system, EU6e (EC) * Trailer coupling, fixed * One towing eye in the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling to the side * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirror on the left, convex, with integrated LED turn signal and wide-angle view * Exterior mirror on the right, convex, with integrated LED turn signal and wide-angle view * All-wheel drive 4x4 * Emergency brake assist * Battery 520 A (92 Ah) * Rubber flooring in the cab * Electronic parking brake * AGM battery (520 A, 92 Ah) and generator * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Stone chip protection (without CO2 optimization) * High roof, painted in vehicle color * Differential lock on the rear axle (manually switchable, mechanical) * Immobilizer, electronic * Park steering assistant with parking assistance incl. side protection * Grab handles at the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with automatic driving lights and coming and leaving home function * Electrical connection block and KFG with ABH programming * Premium interior noise reduction measures * With UNECE CS&SU * 4-cylinder diesel engine 2.0L, assembly 03N.G * ACC Stop & Go * 8-speed automatic transmission for 4x4 Nlodpjz Ed N Uofx Agrsg * Glove compartment with lockable flap, illuminated * Rear wing doors without window cutouts * Air conditioning "Climatronic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Panel van * Child safety lock, electrically operated * Standard climate zones * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assistant "Light Assist" * Leather multifunction steering wheel, heated with Tiptronic * Left-hand traffic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Attention and fatigue detection system * MAN SmartLink * 4-cylinder turbo diesel engine 2.0 l / 130 kW (4V) BIT, Common-Rail * Basic engine is: TK1/TK4 * Fog lights incl. cornering light * MAN Connect * MAN Media Van Navigation Business (12.9 inches) * 12V socket, cup holder * Tire pressure monitoring system * Standard wheelbase 3,640 mm * Three-point automatic seatbelts with height adjustment * Rear wing doors with increased opening angle * Heat-insulating glazing * 12V socket in the cab * Swivel seat left * Swivel seat right * Seatbelt warning, E-contact in the seatbelt buckle, driver and passenger seat * Seat covers in fabric "Toronto Grid" * Seat heating for driver and passenger seat, separately adjustable * Side marker lights * 2 remote control keys * Approval as 3.5t * Start-stop system with brake energy recovery * Lane change assistant * Engine start, standard * Side wind assistant * Windshield wiper interval control with light and rain sensor * LNFZ version with up to 3 seats * Keyless Go with SAFELOCK * Blind spot detection on both sides and departure warning * Turning assistant * Emergency assistant (active lane keeping assistant, emergency assist, and traffic jam assistant) * Preparation for alcohol interlock * Intelligent speed assistant * With multifunction camera * Digi

Condition: reconditioned (used), Year of construction: 2019, operating hours: 335 h, functionality: fully functional, working width: 850 mm, area performance: 4,200 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, Hako Scrubmaster B90 CL TB850 Scrubber-Dryer New SIAP 6V 175Ah gel batteries (4x) 2019 model year; 335 operating hours 850mm cleaning head (TB850) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose Nodpjz Eiziofx Agrelg A new suction motor ensures high water extraction power from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 850 Squeegee working width (mm): 1100 Theoretical coverage (m²): 4200 Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW 6V 175Ah SIAP gel batteries (x4) NEW 445mm PPL 0.5 disc brushes (x2) NEW 24V 600W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: The 85-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design makes it highly maneuverable; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (850 mm) ensures high area coverage. The control panel is highly legible and intuitive to operate.

Condition: excellent (used), functionality: fully functional, clear span: 2,700 mm, total height: 10,050 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 10,000 kg, number of shelf rows: 5, overall weight: 14,500 kg, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system on offer has a total of 648 pallet spaces, including spaces on the floor level. At a total price of €14,240.00 net, this corresponds to a price of only €21.97 net per pallet space. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Level load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm Nledpez Env Sofx Agreg - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: Floor + 5 beam levels - Pallet spaces: 648 including floor spaces - Price per pallet space: €21.97 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 270 × Beams, approx. 360 × 12 × 5 cm - 540 × Locking pins PRICE: €14,240.00 net €16,945.60 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner logistics company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optionally available - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, a renovation, or an extension – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants will be happy to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company website. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, reverse speed: 25 mm/s, SPECIAL OFFER – 5% DISCOUNT! # MTP C-FRAME HYDRAULIC PRESS – 1000 kN / 102 t Professional MTP hydraulic press with a pressing force of 1000 kN (approx. 102 t), designed for demanding industrial operations such as pressing, straightening, bending, assembly and forming of metal components. The open C-frame design provides excellent access to the working area and facilitates easy positioning of workpieces. The robust welded steel construction ensures high rigidity, stability and durability during operation. The hydraulic system provides smooth and precise ram movement. The machine is suitable for manufacturing plants, metalworking workshops, tool rooms, maintenance departments and the automotive industry. KEY FEATURES: • Pressing force: 1000 kN (approx. 102 t) • Open C-frame construction • Robust welded steel frame • Hydraulic drive system • Smooth ram operation • Large and easily accessible working area • Designed for industrial applications • Brand new machine • CE compliant TECHNICAL DATA: • Pressing force: 1000 kN (approx. 102 t) • Maximum working pressure: 25 MPa • Maximum opening: 600 mm • Ram stroke: 300 mm • Working table dimensions: 700 × 500 mm • Throat depth: 250 mm • Downward speed: 11 mm/s • Return speed: 25 mm/s • Motor power: 5.5 kW • Machine dimensions (L × W × H): 1400 × 900 × 2150 mm • Machine weight: 2200 kg APPLICATIONS: • Pressing and fitting operations • Straightening • Bending of metal components • Assembly work • Metal forming • Tool room and workshop operations • Industrial production • Maintenance operations ## TRANSPORT & WARRANTY The machine is brand new and covered by a 12-month warranty. We provide spare parts, warranty service and professional after-sales support. We can arrange professional transport throughout Europe using experienced industrial machinery carriers. The machine is properly secured for transport and can be delivered directly to the customer's specified address. We can also arrange international transport and shipment to countries outside the European Union. Nsdpfx Agjyrr Rksrjlg ## METAL TECHNICS POLSKA Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We provide technical advice, spare parts and comprehensive after-sales support. Contact us for the current price, machine availability, transport costs or an individual commercial offer.

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW Njdpfx Ajxfwdogrolg 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, PBT Works SuperSWASH III PCB Cleaning System / Printed Circuit Board Washing System – 2021 Cleaning system for printed circuit boards / electronic assemblies For sale: a cleaning system for the professional cleaning of printed circuit boards and electronic assemblies. Features: * Cleaning, rinsing, and drying in a single process * Suitable for printed circuit boards, assemblies, solder frames, and stencils * Touch panel operation * Integrated DI water treatment system * Conductivity measurement * Efficient air knife for rapid drying * Barcode scanner for traceability * Industrial design Condition: used, fully functional Nodpez D Di Sefx Agrelg Inspection possible by arrangement. Please contact us if you are interested.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 138 h, load capacity: 454 kg, empty load weight: 17,917 kg, construction height: 2,800 mm, fuel type: diesel, total length: 10,250 mm, drive type: Diesel, arm reach: 22,710 mm, construction width: 2,490 mm, working height: 27,910 mm, Telescopic boom lift Technical condition: New Battery condition: New Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used machines. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie S-85 XC FE is a powerful hybrid telescopic boom lift for working at great heights, both indoors and outdoors. With a working height of up to 27.9 m, a large lateral reach, the XC version with higher load capacity, and the low-emission hybrid drive, this machine is ideally suited for heavy assembly, maintenance, and construction work, even under demanding operating conditions. Robust, all-terrain, and efficient to use. For more information and a non-binding inquiry, please visit our website – safe working at any height. Nlsdpfjy Ii Hisx Agreg

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Speed class: 4 Technical condition: New Battery condition: New Nljdezvkaqepfx Agrjg Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used machines. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie GS-1932m E-Drive is a compact electric scissor lift for working at height indoors and on solid surfaces. With a working height of up to 7.55 m, a narrow design, and a modern electric drive, this machine is ideal for maintenance, assembly, and installation work in halls, warehouses, or confined work areas. It is quiet, energy-efficient, and easy to operate. Further information and a non-binding inquiry can be found on our website – safe working at any height.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 211 h, load capacity: 227 kg, empty load weight: 763 kg, construction height: 1,780 mm, fuel type: electric, total length: 1,350 mm, drive type: Elektro, construction width: 750 mm, working height: 5,450 mm, Special aerial work platform Speed class: 4 Technical condition: good Description: Our equipment is regularly serviced and inspected. We offer rentals, sales, service, and repairs – you can get everything you need from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie GRC-12 is a compact aerial work platform for working at height indoors and in confined spaces. With a working height of up to 5.45 m, a narrow design, a movable platform, and emission-free electric drive, this machine is ideally suited for maintenance, assembly, and installation work in halls, storage areas, or shopping centers. It is easy to operate and particularly maneuverable in tight working areas. You can find more information and submit a non-binding inquiry on our website – Safe working at any height. Nedpfoya Smujx Agrolg

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 180 h, load capacity: 250 kg, empty load weight: 2,782 kg, construction height: 1,998 mm, fuel type: diesel, total length: 5,324 mm, drive type: Diesel, arm reach: 8,500 mm, construction width: 780 mm, working height: 20,000 mm, Track-mounted aerial work platform Technical condition: very good Nljdpfxjwx Txqe Agrjg Battery condition: very good Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used machinery. Our team will be happy to provide you with competent and personalized advice. Just call us or send us a message via SMS or WhatsApp. The CTE TRACCESS 200 diesel is a compact track-mounted aerial work platform for working at height in confined spaces, on sensitive surfaces, or in challenging terrain. With a working height of up to 20 m, a lateral reach of up to 8.5 m, and track chains, this machine is ideal for assembly, maintenance, and tree care work, even in hard-to-reach locations. Compact, all-terrain capable, and easy to operate. You can find more information and submit a non-binding inquiry on our website – safe working at any height.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 2,603 h, load capacity: 680 kg, empty load weight: 3,243 kg, construction height: 2,590 mm, fuel type: diesel, total length: 3,120 mm, drive type: Diesel, construction width: 1,750 mm, working height: 10,000 mm, Scissor lift Drive class: 5.6 Technical condition: normal Battery condition: normal Nlodpfxeyafdmj Agrjg Description: Our equipment is regularly serviced and inspected. We offer rentals, sales, service and repairs – you can get everything you need from a single source. Lease-to-own options, financing, and the purchase of used machinery are also possible. Our team will be happy to provide you with expert and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie GS-2669 RT is a powerful all-terrain scissor lift for working at heights outdoors and on uneven ground. With a working height of up to 10 m, a large platform, and excellent off-road capability, this machine is ideal for construction sites, assembly, maintenance, and construction work involving people, tools, and materials. Robust, stable, and easy to operate. You can find more information and submit a non-binding inquiry on our website – safe working at any height.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 929 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, construction height: 2,500 mm, empty load weight: 12,400 kg, total length: 6,420 mm, drive type: Diesel, construction width: 3,790 mm, Telescopic forklift, rigid frame Speed class: 25 Nlodpfjv Swphex Agreg Technical condition: very good Description: Our equipment is regularly serviced and inspected. We offer rentals, sales, service, and repairs – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used machinery. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Manitou MT 1840 Easy is a powerful telescopic handler for construction sites, as well as for lifting and material transport tasks. With a lifting height of up to 17.55 m, a load capacity of 4,000 kg, and all-wheel drive, this machine is ideally suited for working on uneven terrain and with heavy loads. Robust construction. High off-road capability. Ideal for lifting, assembly, and material handling tasks. Easy to operate and versatile. You can find more information and submit a non-binding inquiry on our website – Safe working at any height.

Year of construction: 2021, condition: ready for operation (used), The GatheRex™ Cell Harvest Pump is a liquid handling device designed to work with closed system cell culture devices. The GatheRex connects to closed system devices and uses a low pressure forced air mechanism to remove media, concentrate cells and minimize storage and/or downstream processing. An internal air pump pressurizes the system by pumping air through the sterile vent filter on the cell culture device. When pressurized, excess media, or a cell fraction, is forced out of the device through the tubing assembly then into a collection receptacle. Model 80000Z is designated by black ID tags on the tubing pinch clamps. This version is compatible with large diameter tubing (0.375” OD) for media removal and small diameter tubing (0.160” OD blood transfer bag style) for cell recovery. ELECTRICAL REQUIREMENTS 1. Input: 100-240VAC, ~1.3A, 50-60Hz, Single Phase Fuse Type: 5ET 3.15-R, Cartridge, Time Delay, 3.15A, 250 V, 5mm x 20mm (0.2” x 0.79”), 5ET Series Detachable Power Cord: C13, 18AWG, 10A minimum, Grounded (3 Prong), UL 62, CSA-C22.2 No. 49 IEC / UL: 61010-1 edition 3.1 and 61326-1:2012 LOW PRESSURE OUTPUT 1. Gauge Pressure: 120 – 180 mmHg (2.32 – 3.48 psi) No adjustments for altitude are needed. 2. Flow Rate: Minimum 5 mL/sec fluid transfer rate from G-Rex M-CS Nlsdpez Dx Susfx Agreg ENVIRONMENTAL CONDITIONS 1. Temperature: 15°C to 35°C (59-95°F) 2. Humidity: ≤ 95% Relative Humidity 3. Altitude: < 2,000 meters (6,561 feet) Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Nlodoz Dxr Ijpfx Agrog Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen

Condition: new, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Speed limiter - Air conditioning - PTO - Rear view camera X TO GO "EUROMIX TO GO" OFFERS YOU IMMEDIATELY AVAILABLE NEW VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN URGENT SITUATION (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your advantages: - Immediately deployable complete vehicles (concrete mixer/tipper) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price-performance ratio - Financing options - Trade-in of your old vehicles VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP SCORPION SCO 25-59 Unladen weight: approx. 12,050 kg Payload: approx. 19,950 kg Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel arrangement: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8 liter in-line six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment Engine & Drive Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic transmission Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine auxiliary drive SAE 1410 Transmission oil cooler Two-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel arrangement 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire filling hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver's seat Passenger seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument panel Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Kerb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety equipment Electronic Stability Program (ESC) Nedsz D Utujpfx Agrjlg ABS / EBS Hill start assist Emergency braking assistant (AEBS) Side collision assistant Driver attention assistant Adaptive cruise control Rear view camera Rear warning system LED headlights LED daytime running lights Automatic headlights Additional equipment 275-liter fuel tank 57-liter AdBlue tank Lockable fuel filler caps Body Builder module Electrical superstructure interface VBG trailer coupling Aluminum rear underrun protection

Condition: reconditioned (used), Year of construction: 2019, operating hours: 515 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, Hako Scrubmaster B70 TB650 scrubber-dryer New SIAP 12V 105Ah gel batteries (2x) 2019 model year; 515 operating hours 650mm cleaning head (TB650) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water pickup power from the squeegee Each unit we offer features custom-taken photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 650 Squeegee working width (mm): 950 Theoretical coverage (m²): 3200 Nlsdpfxoz Eab He Agrsg Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 12V 105Ah SIAP gel batteries (2x) NEW 330mm PPL 0.5 disc brushes (2x) NEW 24V 500W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design makes it highly maneuverable; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. The wide working width (650 mm) ensures high area coverage. The control panel is highly legible and intuitive to operate.

Condition: used, Ohra K60 Cantilever Rack, Galvanized, Set of 4, Used 🧰 Product Features • Manufacturer: Ohra • System: K60 • Color: Galvanized • Condition: Used, see photos • Uprights: 4 pcs, 6,340 mm high (IPE240) • Base: 4 pcs, double-sided base, 2,550 mm deep (IPE240) • Arms: 32 pcs, 1,200 mm depth (K60, New) • Safety: 64 pcs safety pins • Fasteners: 16 pcs Hilti concrete anchors • Load capacity per upright and side: 3,200 kg • Load capacity per arm: 800 kg • Frame spacing: 1,500 mm • Overall height: 6,600 mm • Overall width: 4,500 mm 💰 Price € 2,790,- net, excluding VAT. • Quantity discount: upon request • Private sale: No minimum order quantity • Shipping costs: Available throughout Europe, upon request • Delivery time: Available immediately • Inspection and collection: Possible at any time by arrangement • Product number: P10458 Nsdpfx Aez Ekv Usgrjlg We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel mezzanine floors available immediately • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND FOCUS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, functionality: fully functional, 50 linear meters of Nedcon pallet racking 🧰 Product features • Manufacturer: NEDCON • Color: galvanized / blue / orange • Condition: new, see photos • Frames: 19 units, pre-assembled 700 x 110 cm • Beams: 144 units with 270 cm clear span, box profile 110 x 40 mm • Safety: 288 units of galvanized safety pins • Fasteners: 76 units of Hilti concrete anchors • Load capacity: 3,050 kg per level • Field load: 12,000 kg • Load capacity label: included Over 5,000 linear meters in stock Frame heights up to 7 meters Available beam lengths: 182.5, 270, 330 and 360 cm Matching deep uprights, shelf liners and shelf panels available upon request 💰 Price: €10,490 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Nljdjfkgq Sjpfx Agreg • Product number: P2837 Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • Weekly, 30–50 semi-trailer trucks of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete, all-round service package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete stock, including complete clearing. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty storage solution for industrial warehousing needs. The modular high-bay racking is ideally suited for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 18.50 m - Load capacity per level: 2,000 kg - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground + 5 beam levels - Pallet spaces: 120 including ground spaces - Condition: used, Jungheinrich MPB SCOPE OF DELIVERY: - 6 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 50 × Beams, approx. 360 × 12 × 5 cm - 100 × Locking pins PRICE: €2,950.00 net €3,510.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code Nodpfjz Envrox Agrelg - Professional installation and dismantling by trained teams optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly create a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! Here, you can get a comprehensive overview of our pallet racking, shelving systems, and other solutions. Many systems are set up and can be experienced directly. Our expert consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-capacity heavy-duty racking solution designed for industrial warehousing requirements. The modular high-bay racking is ideal for logistics companies, industrial operations, large warehouses, and forwarding agents. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 6,000 kg, this immediately available pallet racking system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 825 cm - Depth: approx. 105 cm - Length: approx. 3080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: yellow painted - Upright: approx. 825 x 105 cm, pre-assembled - Upright colour: blue painted - Levels: floor + 4 - Pallet positions: 165 incl. floor spaces - Version: Used – Jungheinrich Esmena Nodpfx Agjz Enwvjrelg SCOPE OF DELIVERY: - 12 uprights (approx. 825 x 105 cm), pre-assembled - 88 beams (approx. 270 cm) - 176 locking pins Price: €3,560.00 net €4,236.40 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery in Germany by our partner forwarding agents – freight costs depend on postal code - Professional assembly and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department is happy to provide you with a non-binding offer tailored to your requirements. Whether for new construction, modification, or expansion, we offer professional advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! On-site you can gain a comprehensive impression of our pallet racks, warehouse shelving, and further solutions. Many systems are assembled and available for hands-on viewing. Our expert advisors are happy to assist you with questions and customized consultation – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or call. Our telephone number is listed on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 am - 4:00 pm. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location Nlsdpfxjv Sthgj Agrog

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function Nedpfevxgrrsx Agrolg • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Condition: new, Manual hand unit Ja J/N Automatic for frames Ja J/N Nlodpeyrtymofx Agrjg

Condition: new, Manual hand unit , J/N Automatic for single pieces Ja J/N Automatic for frames Ja J/N Nljdeytx T Uopfx Agrjg