Used Ptw-Freiburg Isotope Calibrator for sale (1,013)

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Bedpfx Adoy T N H Teiedc

Condition: used, Year of construction: 1985, overall weight: 3,000 kg, grinding height: 150 mm, extraction nozzle diameter: 250 mm, power of feed motor: 1,500 W, transport length: 2,650 mm, transport height: 2,400 mm, workpiece width (max.): 1,100 mm, transport width: 1,860 mm, I am offering for sale a two-belt wide belt sander from the Italian manufacturer VERBOOM. Model: BBV 1100/2 - Maximum width of the workpiece: 1100mm - Maximum height of the workpiece: 150mm - Maximum feed rate: 16m/min Bedpfx Adsy Uh E Reiodc - 2 sanding units: 1) ribbed rubber roller for calibrating 2) metal roller + backing pad + metal roller - Power of the sanding units: 15kW - Feed motor: 1.5kW - Lifting motor: 0.75kW - Pneumatic belt oscillation with photocells - Stepless feed rate adjustment - Working pressure: 6-8 bar - Diameter of the dust extraction nozzle: 250mm - Overall dimensions (L/W/H): 2650x1860x2400mm - Weight: 3000kg The wide belt sander is designed for precise calibrating and finishing sanding of solid wood components used in building joinery, veneered panels, plywood, and similar materials. The machine is equipped with two sanding units. Depending on the grit of the abrasive belts used, it can be used for rough, calibrating, or smoothing sanding.

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required Bsdpfxjw Ah Axo Adisdc LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: refurbished (used), Mimaki JFX200-2513EX UV-LED Flatbed Printer – Used, Top Condition, 2.5 x 1.3 m Flatbed Brief Description Used Mimaki JFX200-2513EX UV-LED flatbed printer in excellent, well-maintained condition, ideal for rigid materials, signage, and industrial applications. A recent service was just performed, including a functional check, calibration, and test prints. The offer includes a 6-month warranty on the functionality of the machine. The new price of this model, depending on the configuration, is approximately €59,500.00 net; you only pay €29,999.00 net here. This is about 50% cheaper than the new price. Highlights – Large-format UV-LED flatbed (approx. 2,500 x 1,300 mm) for true sheet production – High productivity with up to approx. 35 m²/h, depending on the mode and configuration – 2.5D texture function for tactile structures (wood grain, relief, logos, Braille effects) – Printing on rigid media such as acrylic, PVC, aluminum composite, glass (with suitable preparation), wood, and more – White and clear varnish option (depending on the configuration) for undercoat printing, effect varnishes, and multi-layer printing – UV-LED technology: low energy consumption, minimal material distortion, fast further processing – Ideal for signs, displays, POS/POP, furniture decorations, industrial applications, and signage Technical Specifications (typical for the model) – Printing technology: UV-LED flatbed printer – Max. printing area: approx. 2,500 x 1,300 mm – Max. media thickness: up to approx. 50 mm – Printing resolution: up to 1,200 dpi (300 / 450 / 600 / 900 / 1,200 dpi, depending on the mode) Bjdpfx Asy S Sbqodiodc – Max. printing speed: up to approx. 35 m²/h (draft mode, 4c configuration, depending on the setup) – Print head: 3 Piezo print heads in staggered arrangement for higher productivity – Ink types (depending on the configuration): Mimaki UV inks LUS-120, LUS-150, LUS-211, LUS-350, LH-100, etc. – Possible color configurations: e.g. CMYK + White + Clear (depending on the actual installed configuration) – Special feature: 2.5D Texture Maker / 2.5D relief printing via RasterLink RIP – Vacuum table: flatbed with suction zones for secure media fixation – Connections: USB 2.0 and Ethernet (network operation) – Dimensions (W x D x H, approx.): 4,400 x 2,450 x 1,250 mm – Weight: approx. 650 kg (The exact configuration of your machine may vary slightly; details according to serial number and inspection.) Condition & Delivery – Condition: Used machine from a professional production environment, very well-maintained and in top condition – Service: Fresh complete service including cleaning, adjustment, and test prints before delivery – Function: All axes, UV-LED, vacuum table, and safety devices checked; current test print can be sent in advance upon request – Warranty: 6-month warranty on the functionality of the machine with proper installation and use – Commissioning: Optional delivery with our own service technician, setup, installation, and commissioning at the customer's site – Training: Optional on-site training in operation, media handling, maintenance, and RIP workflow – Transport: Germany-wide delivery organized; unloading by forklift/crane or by arrangement Contact & Support: We are specialists in Mimaki, Epson, Mutoh, Roland, Summa and more – with our own service team, spare parts & hotline.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WRE-200920166278FL, CNC Milling Plotter CNC-1325 5.5 kW Working area: 1300x2500, Z-300 mm - DSP NK 105G2 controller with proprietary processor, allowing parameter changes during machine operation - Modern software for easy creation of 2D, 2.5D, and 3D files from images - Brushless spindle, industrial-grade bearings, water-cooled, 5.5 kW (24,000 rpm) Bodpfx Aey Au Easdiodc - Digital drives with rack and pinion transmission (X, Y axes) - Helical rack gears - Z axis driven by TBI 25mm ball screw - Chip extraction brush - Welded steel frame - Automatic tool length calibration sensor - WIWIN-25mm linear rail guides - Vacuum table with 4 suction zones - BUSCH-250 vacuum pump - Oil mist tool cooling system - Automatic tool changer, 5.5 kW ATC spindle - Chiller unit for ATC spindle cooling The machine is in excellent condition, used only occasionally. Sold complete with vacuum pump. For further information please call: Piotr Żołnierczyk, tel. 606 666 023.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a Bdjdpfxjt Irffo Adiec modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: used, mileage: 66,155 km, power: 355 kW (482.67 HP), first registration: 02/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, soot filter, STANDARD SPECIFICATION Mechanical cab suspension Adaptive Cruise Control with FCW and AEBS-3 Lane Departure Warning System Goodyear RR, not applicable Euro 6 emission class TraXon automated transmission, 12 gears Standard component layout Left-hand fuel tank DAF Connect Powertrain Plus Warranty - 3 years - 300,000 km Options Rear power take-off switch, version 2 Sleeper High Cab Front chassis version: no floor plate Exterior sun visor Signal horns, 1 set LED headlights and fog lights LED skylights Two LED headlights for rear cab wall Rear window: double-glazed No front mirror DAF Corner View Rear view camera, prepared Central locking, 3 keys, 2 remote controls Adjustable Short roof spoiler, Sleeper High Cab Roof spoiler color: Crystal White Bdsdsui Dycepfx Adioc Leather steering wheel Dashboard finish: Plateau Cab interior trim: Argenta Door trim: Loosely woven fabric Driver's seat: Super Air Armrests on both sides of the driver's seat Passenger seat: Cinema andamp, table, fabric cover Refrigerator and drawer Extra Comfort mattress for lower bunk Upper bunk Protective net on both bunks Curtains with divider Automatic cab climate control Roof hatch with electric operation Accessory power supply: Standard 2x 40 A ECAS remote control with extended functions FMS connector, extended and prepared Toll preparation Digital tachograph, VDO 1C, version G2V2 Speed limit setting: 90 km/h Tachograph calibration DAF Infot. Exclusive pre-installed, luxury speakers Antennas: DAB-prepared, radio, 2x mobile antennas. GNSS Extra: CB Wireless Charger Rear View Alarm Turn Assist Ready Front: 8.00 t, Parabolic, 165 N Rear Axle 2, 8000 kg, Load Index 156 Axle Load Monitoring Leaf Spring Suspension, Front: Medium Front Axle(s): 385/65R22.5 Driven Rear Axle(s): 315/80 R22.5 2nd Driven Rear/Trailing Axle: 385/65R22.5 F1,385/65R22.5GO KMAXS2 160/000 K Steering BBA R1,315/80R22.5GO KMAXD2 156/150 L Traction DCA R2,385/65R22.5GO KMAXS2 160/000 K Steering BBA MX-13 engine, 355 kW/483 hp Cab emblem: 480 ECO performance No automatic idle shutdown Traction assist 15.0 t Rear axle ratio 2.64 Mechanical differential lock ZF Intarder Wheelbase 4.80 m / rear overhang 2.70 m Longitudinal member 310/7.0 mm, with internal adjustment front/rear Exhaust pipe right EAS unit right, horizontal 75 l exhaust tank left 620 l aluminum fuel tank left, height 620 mm Prepared for rear work lights Cross member D137 Rockinger coupling D130 Electrical connection for trailers, 24 V/15-pin Analog body signals and warnings Chassis with analog connection for engine speed control ECAS control CAN J1939 functions in the body connector Application connector product-market combination Application connector for the BB remote control Side marker lights Body mounting method BAM 1, console type B PTO engine rear, 1 o'clock, control without clutch, pump drive 130 A generator, 2 x 210 Ah AGM batteries Battery energy monitoring Dust shield Construction: S 21 with 210 mm frame, 50 mm support blocks (always specify when ordering) Additional container centering in the rear area, without support Hole pattern in the subframe for screw mounting (50 x 50 x 15) Screw-on underrun protection R58.03, hydraulically folds out 850 mm to the rear, final paint finish RAL 7021, including sensor and safety circuit, additional hydraulic section, 2 x 12 mm hydraulic lines to the rear

Condition: excellent (used), Year of construction: 2012, Coordinate measuring machine for inline and prduction use from Mitutoyo in good condition, built 2012, installed 2014 Controller Mitutoyo UC240, Probe Renishaw PH10MQ/TP7, Software Mitutoyo MCOSMOS-1 V3.5 Measuring ranges: X – axis 905 mm Y – axis 1005 mm Z – axis 605 mm Accuracy acc. ISO 10360 MPEE = [2,5 + 3,5L/1000] µm at temperature range 18… 22 °C Base material Steel fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale Resolution 0,0001 mm DC motores with encoders Guideways linear guides Probe Renishaw PH10MQ with PHC10-2 plus (used) Probe Renishaw TP7 optional with ACR-3 (used) Bjdpfoh Nu Uhox Adiedc Computer Workstation WIN 10 (used) or equipment on demand e.g. upgrade to Renishaw scanning probe Installation and Calibration € 5.000,-- plus travel expenses On demand: - SP25M + FCR rack instead of TP7 ( + € 12.000,--) - Upgrade PH10MQplus (€ 8.000,--)

Condition: excellent (used), Year of construction: 2008, Biesse Artech Levia 310 - 1350. YoM: 2008. UK Price £9,000 + VAT Single belt Finishing sanding machine which has been used for pre-sanding and de-nibbing in the paint shop. Now surplus to requirements due to closure of the paint shop. Can also Calibrate and sand solid woods. Single head / belt construction. Connected to services and available for any demonstration. Excellent Condition. Working width 1350mm. Thickness between 3mm & 200mm. Combi Working Unit Grooved steel Calibration Roller. AND Electronic Sectioned Pad. Bdedoyuy R Dspfx Adiec Cleaning brush on outfeed. Vacuum table to increase panel holding. Compressed air belt cleaning. Automatic panel thickness setting. Extended infeed rollers.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Rex RKS 85 | Sausage hanging and cutting system Manufacturer: REX Technologie GmbH & Co. KG Model / Type: RKS 85 Serial number: 2130216 Year of manufacture: 2016 Power supply: 400 V / 50/60 Hz Bsdpfjy Uchmex Adijdc Current protection: 3x 16 A Overall dimensions: 1450 x 660 x 1400 mm The Rex Technologie RKS 85 is a high-performance, automatic sausage hanging and cutting system (longitudinally calibrating), designed as a peripheral device that works directly with vacuum stuffers. This 2016 model is a key component in the automation of production processes in medium and large-scale sausage manufacturing plants. The RKS 85 system's function is to precisely and consistently portion a continuous sausage strand into equal segments (whether in natural, artificial, or collagen casings), and then automatically form loops and precisely feed them onto hooks for easy transfer to smoking racks. The machine minimizes the risk of casing rupture and guarantees consistent weight and identical length for each individual sausage. Key features and advantages: - Precise portion control and calibration: The advanced belt-driven guidance and portioning system gently but firmly grips the casing. This eliminates air pockets inside the sausage and ensures the ideal appearance of the finished product. - Versatility and quick changeover: The machine handles a wide range of sausage calibers and lengths, from thin chorizo to classic grilling sausages and hot dogs. Changing operating parameters and product types is done smoothly from the control computer of the stuffer or the machine's panel.

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting Bodpfey T Irhox Adisdc 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7910 Bedpfxey T Ip Tj Adijdc TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902030381, empty load weight: 5,960 kg, maximum load weight: 29,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5, color: yellow, Year of construction: 2021, The images are archive images; the vehicle may still be in use. Fine-grained steel welded construction, kingpin plate with interchangeable 2" kingpin, slightly angled outer frame with "Load-Lock profile" for securing lashing straps, 24 tons. Two-stage support wind, single-sided operation, with straight lower section, without lateral thrust compensation. Note: Free support base angle or free rear swivel radius approx. 1930 mm without supports, extension ladder at the rear, door lock on the side, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Rear impact protection, "blocker" - transverse galvanized steel angle, as forklift protection and to protect the door hinges, pallet stop on both sides approx. 15-20 mm high, in bolted version, loading height reduced by approx. 15-20 mm. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, air suspension, without lift axle. Braking system: 2-line compressed air braking system, color-coded line routing for easy servicing. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connecting line, EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable, with raise and lower valve. Vehicle - driving stability system, brake pad wear indicator via EBS-CAN bus signal, for display on the instrument panel in the cab; truck must be appropriately prepared, axle load detection via EBS-CAN bus signal, for display on the instrument panel in the cab; truck must be appropriately prepared, no truck installation (no calibrated scale). Tire pressure monitoring system TPMS Haldex, via EBS, without truck installation (this requires a prerequisite in the truck). Electrical system: 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED. 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole socket at the front, without connecting cable, additional LED work lights at the rear, switched via reversing light. Floor: Sieve printing plates approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg. Body Assembled body, assembled body. Front wall / front corner posts 2,580 mm high, corner posts made of steel in full volume design, release mechanism for side tarpaulin on the front wall, "crash blocker", at the bottom inside at approx. 140 mm height with steel impact protection. Intermediate posts: 2 pairs of sliding posts, adjustable over the entire length, with 4-fold insertion pockets and a long pocket at the bottom. 2 pairs of post positions. Insertion slats: 5 rows of aluminum V-insertion slats. Rear wall / rear corner posts Rear corner posts made of steel to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Rear portal doors, 2-leaf with 2 internal twist-lock latches each. Tarpaulin: Tarpaulin, with welded-in horizontal and vertical straps, tension closures made of stainless steel. Bdedey Tvwxspfx Adisc Roof: Sliding roof, end lift at the rear that can be folded up, with the roof that can be slid from back to front, L-roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, roof non-elastic, hardly any deflection of the roof beam when loading and unloading, anti-ice system, with 1 hose in the mid

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035390, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5*, color: grey, Year of construction: 2024, The images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 hose holders, steps, Fliegl standard) Container fittings: 1 x 20 ft center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, with longer twist locks for the container locking mechanism. 24 ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with sliding adjustment Wedge blocks with holder Side underrun protection Rear underrun protection with deep step for easier access + step inside Half-shell fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assist, operated by "3x braking" (start-up assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! with raising and lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be pre-equipped accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain tractor units, false diagnoses may occur, although the function is given) Bdodpey Tvuwjfx Adijc 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable additional LED work light at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/signs Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Bodpfeyzmbdox Adijdc Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. Bjdpfxjyc H N Ne Adiedc The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection Bdodexl Dbtopfx Adioc • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), For sale: professional MAGNAFLUX UVM3059 UV-A radiation intensity meter – used for NDT inspections (non-destructive testing, penetrant testing, fluorescent inspection, etc.). The device is in very good technical and visual condition, ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14/08/2023 • Next inspection due: 2024 • Set includes: original transport case, foam protection, sensor, documentation on the housing The device is fully functional, the display works correctly, and the sensor responds properly to UV-A radiation. Ready for use in laboratory, workshop, production, or quality control. Bdjdpfxjxlub Dj Adioc

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Bjdpfx Aoxl Rgiodijdc

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Bdodjxl Rf Sepfx Adiec

Condition: good (used), Year of construction: 2007, 14 pcs. long goods racks, Bito, length 3.50m, 2 tons / cassette, stackable - used- : Price ex location: 6.350.-€ (net) incl. loading! Priority complete sale! Unit price for small quantities on request! Bodpfx Aeth S H Hodisdc Manufacturer: Bito Type: Long goods cassette Year of construction: 2007 Length: 3,5m Inner width: approx. 49.5cm Interior height: approx. 30cm Maximum payload: 2,000kg Max. Load: 8.000kg Max. Stacking height: 5-fold With crane eyes and fork shoes Stackable Own weight: approx. 100kg / piece New price: approx. 1.200.-€ / piece Available: immediately Condition: good Location: 79108 Freiburg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, PRICE 95,000 EUR (excl. VAT) SERVICES INCLUDED IN THE PRICE: Wooden crate suitable for international container shipping Inspection and demonstration under power prior to payment, at our facility in Belgium Sample print during inspection, upon request On-site installation and commissioning by personnel with previous certified experience on Massivit systems, included for EU destinations. (For non-EU installation, availability is subject to location and prior agreement — please enquire.) On-site operator training by personnel with previous certified experience on Massivit systems at the buyer's premises (EU destinations included; non-EU subject to prior agreement), or alternatively at the seller's facility in Belgium (max. 2 persons, max. 5 days) — available for all buyers 6-month warranty on refurbished mechanical components: dispensers (stators, bearings, couplings), pump stator, dispenser seals, gel filtration system 12 months remote technical assistance via WhatsApp, email or video call, including operation support, g-code guidance, print parameter optimisation and general technical advice DESCRIPTION Large-scale industrial 3D printer Massivit M1800 Pro, model year 2018, professionally refurbished and operational and testable under power. The machine can be inspected and tested under power by appointment at our facility in Belgium. Sample prints available upon request. On-site installation and operator training are included for EU destinations and delivered by personnel with previous certified experience on Massivit systems, supporting setup, calibration and commissioning. For non-EU destinations, please enquire. Training at the seller's facility in Belgium is available for all buyers (max. 2 persons, max. 5 days), covering installation procedures, operation, routine maintenance, software usage and basic troubleshooting. Post-sale remote technical assistance included for 12 months. The machine is equipped with dual independent printheads and offers a build volume of 145 × 111 × 180 cm, making it suitable for the production of oversized parts, moulds, master models and display elements. The system operates with GDP (Gel Dispensing Printing) UV-cured technology, enabling high-speed manufacturing of large components with reduced support requirements, lower material consumption and reduced post-processing time. REFURBISHMENT DETAILS Dispensers refurbished: new stators, bearings and couplings Hydraulic pump refurbished: new stator installed Dispenser seals and rubber wear components replaced Gel filtration system refurbished: new filters installed UV curing modules tested and calibrated XYZ belt tensioning and full table alignment performed DisplayPort cables and left head camera replaced Software updated to Massivit Smart Printer v5.0.3, BIOS/OS verified Bdsdsxx S Dijpfx Adisc Complete system alignment, calibration and functional testing performed before sale Standard equipment included: 2 × nozzles 2.6 mm, 2 × nozzles 1.8 mm, grease gun Software license dongles included (Massivit Printer + Massivit Slicer) Machine available for collection in Belgium (EXW — Ex Works). Loading, handling and transport are at the buyer's cost.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 5-axis universal machining center Quaser PRO.FLEX 6, manufactured in 2016, Heidenhain TNC 640 control system, HSK-A63 taper, 60-tool magazine, 15,000 rpm spindle, Blum TC60 probe. The machine is powered on and can be demonstrated. Machine Description For sale: 5-axis universal machining center Quaser PRO.FLEX 6. The machine is suitable for precise and complex 5-axis machining. It is equipped with a Heidenhain TNC 640 control system, a spindle with an HSK-A63 taper, a 60-tool magazine, and a 3D Blum TC60 probe. The machine is currently powered on and can be demonstrated in operation by arrangement. Technical Data Manufacturer: Quaser Model: PRO.FLEX 6 Year of manufacture: 2016 Control system: Heidenhain TNC 640 Spindle taper: HSK-A63 Max. spindle speed: 15,000 rpm Number of positions in the magazine: 60 Probe: Blum TC60 Number of axes: 5 Connection: 400 V / 50 Hz Power consumption: 71 kVA Machine weight: approx. 15,000 kg Machine dimensions: approx. 511 x 456 x 316 cm Serial number: 352A160001 Operating Hours System on: 24,959 h Machine on: 21,005 h Program run: 7,634 h Hydraulics: 20,995 h Axes: 5,936 h Spindle S1: 6,423 h Spindle S2: 0 h Accessories / Tool Holders Included in the offer is a 3D Blum TC60 probe and a calibration mandrel used during machine start-up with initial spindle lubrication. The tools in the collet chucks can remain with the machine for collection. ER16 collet chucks: short: 1 pc medium: 14 pcs long: 3 pcs ER32 collet chucks: short: 2 pcs medium: 2 pcs long: 2 pcs Bodpfoy Udrtsx Adiedc Shell mill body clamping parts: 3 pcs Separate clamping parts can be taken for the shell mills. The mills/bodies themselves will continue to be used on the machine for the tool room. Machine Condition The machine is used and in operational condition. It is powered on and can be demonstrated. Inspection by prior arrangement.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: KR0810, overall weight: 24 kg, load capacity: 10 kg, arm reach: 850 mm, controller manufacturer: Kassow, teach pendant manufacturer: Kassow, type of input current: AC, repeat accuracy: 0.1 mm, Kassow Cobot KR810 Complete with controller and teach pendant Radius: 810 mm Payload: 10 kg Demo model: Was used once for approximately 4 days at a trade fair (Offer price without cart) Bodpext Rpgsfx Adiodc

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Year - 1980 Line Consists : 1.Wire drawing machine SKP8 T.I. 95647 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P Serial Nr 9564/7 1.3. Year of production 1995 -1999(depends on condition) 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Year of production 1978-1981 3.3. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Year of production 1978-1981 4.3. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included Bdodpfsyfg Tgox Adiec For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation