Used Römheld Reversible Clamp Hydraulic for sale (26,259)

Year of construction: 2002, condition: ready for operation (used), Press force: 1800kN, stroke: 300mm, strip width: 80-400mm, max. coil weight: 3t, system operating pressure: 250bar, pump drive power: 15kW. An inspection on site is possible. Gedpfsy Sncwex Abfska

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Gjdpjzub Nmofx Abfoka Control system defective If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), Punching force: 3000kN, table surface: 2200x1600mm, clearance at maximum stroke position: 190mm, punching stroke, adjustable: 20-160mm, working height without punching pad: 1050mm, punching speed V (down): 63mm/s, V (up): 71mm/s, V (high pressure): 6,8mm/s, punching sliding table, usable area: 2200x1600mm, travel, constant: approx. 120mm, in/out travel time, adjustable: approx. 2s, voltage: 400V, phases: three-phase, frequency: 50Hz, rated current: 55A, upstream fuse: 80A, control voltage: 230/24V, rated power: 30kW, protection class: IP54, operating pressure: 6bar, weight: 18t, with hydraulic unit type 250, with documentation. An on-site inspection is possible. Gsdpfx Abozukrdefoka

Condition: new, functionality: fully functional, load capacity: 45,000 kg, total length: 9,000 mm, Hydraulics Condition: New unit Gjdpfx Absyyfl Eefska Technical condition: New Description: Extension cylinder for Linde Reachstacker series 357 C4230TL5 - C4535TL5

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, swivel cylinder -Hydraulic cylinder: double-acting, stroke 300 mm -Piston rod: Ø 35 mm -Holes: Ø 25 mm / Spacing: retracted 540 mm -Dimensions: 590/85/H105 mm -Weight: 10 kg Gedpfx Abjztpfmsfoka

Year of construction: 1994, condition: ready for operation (used), Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible. Gksdenxk I Repfx Abfea

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Gjdpfxsnvfduo Abfjka

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Gedpfxolyr Adj Abfoka

Year of construction: 2002, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Godpfx Aonvfdqobfoka

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Gkedpfxol Tn Epo Abfsa

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Gkedpfx Aslc N Ryebfsa

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Gksdpfx Ajlc N R Djbfoa

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Gkjdpfsim Ixfjx Abfea

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm Gkjdpjxukpcefx Abfja hole in the table 130 mm

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by Gkedjt Tqkdopfx Abfea motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t Gkjdpfxoyif Nre Abfoa dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l Gjdpfxjww Ncce Abfska weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 2000, length 800 mm width 800 mm height 1000 mm Gedpfx Abjznnd Dsfska total power requirement 0 kW weight of the machine ca. 700 kg dimensions of the machine ca. 800 x 800 x 1000 mm

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm Gsdpfx Aot Tqnvebfeka distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm table height over floor 1015 mm Number of downholders 8 St. cutting angle 0,5 - 2,5 ° total power requirement 12 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device.

Condition: used, Year of construction: 2000, length 800 mm Gjdpfeznndqox Abfoka width 1000 mm height 1300 mm total power requirement 0 kW weight of the machine ca. 900 kg dimensions of the machine ca. 800 x 1000 x 1300 mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 2 towers with plates are available! We are offering a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical Data: Manufacturer: LANG Technik Gkodpfxoztzi Rs Abfsa Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically flawless. Normal signs of wear and tear consistent with age and application. Scope of supply: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 The clamping tower enables optimal utilization of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by arrangement. Shipping or collection by agreement.

Condition: used, functionality: fully functional, Year of construction: 2017, Hydraulic plate shear Godpfsztp I Isx Abfska Maximum force: 294 kN Maximum stroke: 92 mm Cutting length: 3080 mm Maximum sheet thickness: steel 6.50 mm Control system: CYBELEC CYBTOUCH 6

Condition: used, mileage: 642,000 km, first registration: 07/2019, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, Year of construction: 2019, Axle 1: left 10 mm right 10 mm Axle 2: left 6 mm right 6 mm Gkodpoztccrofx Abfsa Axle 3: left 8 8 mm right 8 8mm

Condition: used, mileage: 640,500 km, first registration: 07/2019, fuel type: diesel, fuel: diesel, color: other, Year of construction: 2019, Axle 1: left7 mm right 7 mm Axle 2: left 8 mm right 8 mm Gkedpfxox Ih H Ue Abfoa Axle 3: left 8 8 mm right 8 8 mm

Condition: used, The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Gksdpfszukivex Abfja Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 840kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test