Used Rayetec Spray for sale (2,147)

Condition: used, Electric chain hoist CPV, lifting capacity 250 kg, main lift 8 m/min, FEM group 1, with mobile frame Itodpfx Aoz Tutneg Aon · Robust design for a wide range of applications · Standard operating voltage: Euro voltage 400/50/3 V/Hz/Ph · 42 V contactor control · Motor in protection class IP 55, encapsulated control switch in protection class IP 65, with additional emergency stop protection · Integrated limit switch for the highest and lowest hook position · Motors protected against the ingress of dust and spray water according to protection class IP 55 in accordance with VDE 0530 · Safety slip clutch adjustable from the outside · Electromagnetic spring-loaded brake holds the load securely even in the event of a power failure · Chain guide made of low-friction, thus low-wear, fiber-reinforced polyamide · Lifting height 3 m · Suitable for flange width 58-180 mm, FEM classification (full-load service life hours): FEM 1Am = 800 hours. Other load capacities, lifting heights and 2 travel speeds available on request. · Other technical features: FEM group 1 Am · Lifting height: 3 m · Voltage: 400/50/3 V/Hz/Ph · Main lift: 8 m/min · Subject to testing: yes

Condition: used, Water hose TRIX ROTSTRAHL® L.40m ID 13mm OD 19mm RL 40m CONTINENTAL · Reinforcement: synthetic yarns · Highly flexible and robust cover: EPDM, resistant to ozone and UV radiation · From DN 28, fabric-patterned outer layer; up to DN 25, free of release agents, separating agents, and grease. Lining: EPDM inner layer, smooth, pore-free, black, low flow resistance Temperature range: -40 °C to +100 °C Marking: 6 red, axially running stripes on a black background, “Continental ContiTech TRIX-ROTSTRAHL® DN 13 PN 20 BAR / 290 PSI Made in Germany” Application: Water hose for commercial use, municipal operations, civil engineering, industry, landscaping and gardening, agriculture, and many other areas. Due to its design and construction, it is highly flexible, robust, ozone-resistant, and weather-resistant. The ideal hose for cleaning, irrigation, filling, spraying, rinsing, and emptying. · Other technical properties: Bending radius: 50mm Ijdpfsz Twlmjx Ag Aetn · Weight: 0.245 kg/m · Physical state: Liquid

Condition: used, Belt Treatment 2901, yellowish, 400 ml spray can, OKS · Increases belt tension · Prevents slippage · Protects the belt from drying out and wear · Extends service life Iodpfsz Twkvox Ag Ajtn · Eliminates squealing · Universally applicable for all V-belts, round belts, and flat belts · Further technical specifications: · Content: 400 ml · Color: yellowish · Temperature: up to +80°C · Packaging: spray can

Condition: used, CARAMBA High-performance drilling/cutting oil foam, 500 ml spray can · Protects tools and materials · Highly adhesive foam · Miscible with all water-based coolants · For cooling and lubricating during drilling, cutting and milling · Suitable for alloyed and unalloyed steel, cast iron, chrome-nickel alloys, copper and its alloys · Mineral oil and sulfur-free · Washable with water · Spray onto a dry surface and allow to air briefly · Other technical properties: Color: yellowish · Material compatibility: Iron, non-ferrous metals, steel, cast iron, copper, chrome-nickel alloys Iodez Tmq Sepfx Ag Ajtn

Condition: used, Rust remover ROST FLASH 500 ml spray can, CRC · with cold shock effect · twice as effective against rust · a coolant freezes the sprayed surface down to -40 °C, thereby breaking down the structure of rust and dirt · the finest cracks and gaps are created, allowing the penetrating oil to penetrate faster and deeper · friction is reduced, and stuck screws, bolts, slides, etc. can be easily loosened · acid and silicone-free, leaves a fine protective film and thus prevents future rust formation Itodez Tmcbjpfx Ag Ajn · Other technical properties: Color: yellowish brown · Temperature: up to -40°C · Packaging: spray can

Condition: used, Multi-purpose spray nozzle D, quick-release coupling, KARASTO · D-industrial version – spray nozzles according to DIN 14365, made of light metal · Hand protection and 2-part mouthpiece, made of plastic · with GEKA connection, made of brass · suitable for hose sizes from 10 mm (3/8") to 38 mm (1 1/2") · quick-release lever for full jet, spray jet, and stop · stepless flow rate adjustment · can be unscrewed · particularly recommended for irrigating large areas · Water consumption: full jet = approx. 1.5 m³/h with nozzle bore Ø 4 mm Isdpfxez Tggyo Ag Astn · Spray jet = approx. 10% less · Further technical features: Throw distance, full jet: approx. 15 m

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, pressure: 180 bar, empty load weight: 126 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 8/18-4C HOT-WATER PRESSURE WASHER Year of manufacture: 2023 The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 800 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98–155 Connected load [kW]: 6 Cleaning agent tank [l]: 15 Hose length [m]: 10 Weight [kg]: 126 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components makes the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping. Itjdsz Tqwpopfx Ag Ajn

Condition: used, Variant B) 2 fixed elastic loops for fastening behind the ears (without ties) Large pack, ideal for your customers, employees, or for resale! The white face mask is made of 100% cotton or a blend of 80% cotton and 20% polyester (depending on fabric availability; no difference in quality; please inquire if necessary). The antibacterial effect is ensured by the final treatment of the fabric through the deposition and fixation of a reaction mixture of titanium dioxide and silver chloride. Lightweight, single-layer, high-quality high-tech material for easier breathing than with double or triple layers. Itsdpfx Agsz Tnz So Asn DISINFECT BEFORE FIRST USE!!! Wash at 60 °C if soiled and iron with a hot iron. Disinfect the mask regularly! Disinfection options: 1. Spray the product with a disinfectant. 2. Iron with a hot iron. Dirty face masks can also be disinfected with a hot iron. 3. Place in an oven preheated to 60 °Celsius for 60 minutes. 4. Expose the mask to UV radiation for 1 hour. Dimensions: 18 x 19 cm. Sales unit: 50 pieces in a bag. Hygiene item - not subject to exchange! WARNING: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: used, Variant B) 2 fixed elastic bands for fastening behind the ears (without ties) Large pack, ideal for your customers, employees, or for resale! This face mask works on the basis of filtration with an efficiency of 80-93%. The lifespan depends on the air pollution and how it is used. The NANO face mask is intended for reuse. It is a fine non-woven fabric with a membrane inside, which requires gentle handling. Lightweight, single-layer, high-tech material that is comfortable to wear and allows for easier breathing (also for asthmatics) than with double or triple layers. Contaminants are filtered out and not inhaled. DO NOT WASH OR IRON!!!!! DISINFECT BEFORE FIRST USE! Wipe away dirt with a damp cloth. Please disinfect regularly! Disinfection options: 1. Spray with a disinfectant. 2. Use hot steam from an iron at a distance of approximately 5 cm. 3. Boil in water. 4. Place in an oven heated to 60°C for 60 minutes. Ijdpfx Agsz T Sxze Aotn 5. Expose the mask to strong UV radiation for 1 hour. Hygiene item, therefore not eligible for exchange if the packaging has been opened! ATTENTION: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: used, Type: Piston pump; Capacity: 15 liters; Spray pressure: 6.0 bar; Empty weight: 4.6 kg; Spray lance: 50 cm. Itodpfx Agez T Rzhe Aen

Condition: used, The PERZL KDG box rotator for forklifts is manufactured in a heavy-duty and robust design and features a sturdy rotary bearing. It is compatible with all forklifts and pallet fork carriers with a fork carrier height of 407 mm (ISO FEM II) and has a carrier width of 1050 mm. The device can rotate continuously and enables both clockwise and counterclockwise rotation via a worm gear. It is equipped with hoses and a coupling and has a load capacity of up to 2,000 kg with a self-weight of 180 kg. Optionally, it can be ordered with an insertable third fork (. 1001) to provide lateral support for boxes during rotation. This quality product is manufactured in Germany. - Box rotator ISO FEM II, heavy-duty, robust design with a heavy-duty rotary bearing - Can be attached to all forklifts/pallet fork carriers with a fork carrier height of 407 mm (ISO FEM II) - Carrier width 1050 mm - Continuous rotation, clockwise and counterclockwise rotation via a worm gear - Hoses and coupling Itjdpfsz Uk I Dex Ag Aon - Load capacity: 2,000 kg - Self-weight: 180 kg - Available with an insertable third fork on request (optional, . 1001) - Quality product manufactured in Germany Delivery without forks; forks available upon request!

Condition: used, Anti-Seize Assembly Paste 400 ml, anthracite, spray can, WEICON · Protective, separating and lubricating agent for heavily stressed parts · Optimally matched solid content and selected additives enable a wide range of applications · Protects against corrosion, seizing and wear, stick-slip phenomena, oxidation, fretting corrosion and electrolytic reactions ("cold welding") · Has an exceptionally good separating effect · Other technical properties: Temperature resistance: -180 to +1200 °C Itsdpfez Uk A Isx Ag Ajn · Type: ASA 400

Condition: used, Water hose TRIX ROTSTRAHL® L.40m ID 25mm OD 34mm RL 40m CONTINENTAL · Reinforcement: synthetic yarns · Highly flexible and robust cover: EPDM, resistant to ozone and UV radiation Iodsz Upmlepfx Ag Ajtn · From DN 28, fabric-patterned outer layer, up to DN 25, free of release agents and grease. Inner tube: EPDM inner layer, smooth, pore-free, black, low flow resistance. Temperature range: -40 °C to +100 °C. Marking: 6 red, axially running stripes on a black background, “Continental ContiTech TRIX-ROTSTRAHL® DN 13 PN 20 BAR / 290 PSI Made in Germany”. Application area: The water hose for commercial use, municipal operations, civil engineering, industry, landscaping and gardening, agriculture, and many other areas. Due to its design and construction, it is highly flexible, robust, ozone-resistant, and weather-resistant. The ideal hose for cleaning, irrigation, filling, spraying, rinsing, and emptying. · Further technical properties: Bending radius: 110mm · Weight: 0.58kg/m · State of matter: Liquid

Condition: used, Features - The RP-i25N vibrating plate with forward and reverse operation is the ideal tool for soil compaction and for compacting small to medium-sized areas. It is particularly suitable for use in gardening and landscaping, for the construction of footpaths and patios, for paving work, in foundation construction, in trench and channel construction, and also for compacting interlocking paving. - Water spraying is indispensable when compacting very dusty surfaces, as well as for all asphalt and tar work! The water is distributed in front of or under the plate via a nozzle pipe. The amount of water is adjustable, and the tank is removable. - It is significantly more manageable and maneuverable than a vibrating plate that only operates in one direction. - Infinitely adjustable movement in both directions. - Equipped with an all-round protected V-belt, compact protective frame, wheel kit, and polyurethane plate. Accessories: Replacement rubber mat, transparent, 3-piece (Art. No. 5G3RP130HPC, EAN: 40 47424 00594 1) Replacement chassis (. 5FRP130HPC, EAN: 40 47424 00595 8) Technical data Engine / Drive: 1-cylinder, 4-stroke OHV engine Engine power: 4.1 kW at 3,000 rpm Displacement: 196 cm³ Fuel tank: 3.6 l Engine oil: 0.6 l Plate length: 630 mm Plate width: 400 mm Isdjz Uunuopfx Ag Aetn Frequency: 67 Hz Centrifugal force: 25.0 kN Area performance: 500 m²/h Max. advance rate: 25 m / min Vibration strokes: 4,300 VPM Compaction depth: 30 cm Max. permissible engine inclination: 20 ° Sound power level LWA: 108 dB (A) Operating weight: approx. 131 kg Transport weight (net / gross): approx. 135 / 140 kg Packaging dimensions (L x W x H): 710 x 430 x 1100 mm

Condition: used, Rust converter epoxy® 1000 ml, can for application, BRUNOX · Patented rust stopper and primer with epoxy resins · Penetrates approximately 10 times deeper into rust pores than conventional rust converter emulsions · Very good flow, leaves no brush marks Itjdpfsz Unl Tjx Ag Ajn · Largely compatible with most commercially available topcoat systems · Can be applied undiluted with airless or compressed air spray guns · Free of heavy metals and mineral acids · No silicone remover, brake cleaner, etc. required Rust removal in 3 steps: 1. Remove loose rust; wipe or blow away rust dust/rust particles with a damp cloth/compressor 2. Apply 2 coats of BRUNOX® epoxy® or 3-4 coats using an airless sprayer/spray gun 3. Check for complete drying (FINGERNAIL HARD) – no washing needed 4. Sand the dried layer (only to remove gloss) 5. Apply filler, 1-component filler, or directly apply the final coat · Further technical properties: Color: amber

Condition: used, The Dust Fighter DF Mini is a portable dust control unit that can spray atomized water up to a distance of 8 meters. It is ideal for use in indoor environments, such as during demolition or renovation work. The unit is also ideal for removing asbestos, as it does not have a fan and the operator can suppress the asbestos dust without disturbing the air. Standard equipment: - 70-liter stainless steel water tank - 3 interchangeable nozzle types for different ranges - Wheels and handles for transport - High-pressure pump - Low water level indicator - Lockable for convenient transport - Manually adjustable nozzle spray angle Optional: - Connection to the water supply network Isdpfjz Uncrex Ag Aetn Technical data: Pump: 230V – 50 Hz – 2.6 A, 0.55 Kw – 100 bar Nozzle spray angle: From 80° to 150° Tilt head: Up 25° – Down 15° Supplied with 3 different nozzles: High: Distance 8 m Duration 1 hour 20 minutes Coverage 83 sqm Medium: Distance 7 m Duration 2 hours 25 minutes Coverage 64 sqm Low: Distance 5 m Duration 5 hours 18 minutes Coverage 33 sqm Tank capacity: 70 l Dimensions (main unit) (L x W x H): 710 x 600 x 1,300/2,150 mm Dry weight: 70 kg

Condition: used, Chain protector 341, 400 ml, greenish spray can, OKS · Extremely high penetration · Strong adhesion and resistant to being flung off · Very good wear protection · O-ring compatible · Solvent-free · For high-speed chains · Synthetic lubricant for machine components exposed to high pressures or corrosive environments · Further technical characteristics: container: spray can Isdpfx Ajz Uqw Seg Aotn

Condition: used, Electric chain hoist CPV, capacity 500 kg, main lifting speed 4 m/min, FEM Group 1, with mobile trolley * Robust design for a wide range of applications * Standard operating voltage: European standard 400/50/3 V/Hz/Ph * 42 V contactor control * Motor in protection class IP 55, encapsulated control switch in protection class IP 65, with additional emergency stop protection * Integrated limit switches for the highest and lowest hook positions * Motors protected against the ingress of dust and spray water according to protection class IP 55 in accordance with VDE 0530 * Safety slip clutch adjustable from the outside * Electromagnetic spring-loaded brake securely holds the load even in the event of a power failure * Chain guide made of low-friction, and therefore low-wear, fiber-reinforced polyamide * Lifting height 3 m * Suitable for flange width 58-180 mm * FEM classification (full-load service life hours): FEM 1Am = 800 hours * Other load capacities and lifting heights available upon request. * Further technical features: FEM Group: 1 Am * Lifting height: 3 m * Voltage: 400/50/3 V/Hz/Ph * Main lifting speed: 4 m/min Iedoz U S Ufspfx Ag Aetn * Subject to mandatory testing: yes

Condition: good (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. Itjdpfjx Dbkcox Ag Asn This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar. ✅ Power - 4.8 kW. ✅ Weight - 800 kg. ✅ Dimensions - 1300 x 1100 x 2100 mm (L x W x H). ✅ Bottle formats - 750ml glass bottles: clear (Ø74 mm x 302 mm high) and green Burgundy (Ø83 mm x 297 mm high). ✅ Intended use - still (non-sparkling) liquids. Supplied for wine. EU Declaration of Conformity (Machinery Directive 2006/42/EC) and operating manual available.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Isdpfx Agex S Hmzj Aotn Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, Electric chain hoist CPVF, capacity 2000 kg, main lifting speed 4 m/min, FEM Group 1, with suspension bracket · with suspension bracket · with 2 lifting speeds · load capacity 250 to 2000 kg · robust design for a wide range of applications · operating voltage 400/50/3 V/Hz/Ph · 42 V contactor control · integrated limit switch for the highest and lowest hook position · motor protected against dust and spray water ingress to protection class IP 55 according to VDE 0530 · thermal overload protection, externally adjustable safety slip clutch · electromagnetic spring-loaded brake securely holds the load even in the event of a power failure · chain guide made of low-friction, thus wear-resistant, glass fiber reinforced polyamide · lifting height 3.0 m, FEM classification (full load service life hours): FEM 1Am = 800 hours. Other load capacities and lifting heights available on request. · Further technical specifications: Fine lifting speed: 1 m/min · FEM group: 1 Am Iedps Aac Dgsfx Ag Ajtn · Lifting height: 3 m · Voltage: 400/50/3 V/Hz/Ph · Main lifting speed: 4 m/min · subject to mandatory testing: yes

Condition: used, Hose Reel PRO 2436, Connection Thread 16mm, 5/8 Inch, Plastic/Metal, Boxed, HOZELOCK · Robust metal hose reel · Fully assembled and ready for connection · Includes 30 m premium hose, 12.5 mm (1/2") · Includes 1x spray nozzle, 2 x PLUS hose connectors, 1x PLUS water stop · 1 x tap connector 13 mm - 19 mm - 25 mm (1/2" - 3/4" - 1") · Telescopic handle: extendable up to a maximum of 75 cm Itodpfxj Aac R Ho Ag Aen · Powder-coated metal drum - rust-resistant · Round, oversized hose drum - making it particularly easy to wind up even under load.

Condition: used, Circuit board cleaner KONTAKT LR, 400 ml spray can, KONTAKT CHEMIE · Cleaner and flux remover for circuit boards · The special formula ensures clean circuit boards, resulting in high surface resistance, low susceptibility to leakage currents, and good adhesion of coatings · For cleaning circuit boards and other components after soldering and repair work · Removes greasy and resinous contaminants and prepares surfaces for protective coatings or adhesive bonds · High cleaning power, fast and residue-free drying of the surface · Safe and time-saving handling thanks to the attachable brush Ijdpez U Rxiofx Ag Ajtn · Other technical features: Packaging: spray can

Condition: used, Brake cleaner BRAKLEEN PRO, contains acetone, 500 ml spray can, CRC · With 5-component formula – the most effective way to quickly and residue-free clean brakes, transmissions, engine parts, etc.: cleans up to 40 brake discs* · Five active ingredient components ensure optimal cleaning of oil, grease, road dirt, and brake fluid · High efficiency due to a balanced dispensing system Itsdpe Aadzmsfx Ag Ajn · Dries quickly and leaves no residue* Calculation basis: The spray duration per brake disc for the front and back is 6 seconds. Due to the high cleaning power, a single application is usually sufficient. · Other technical features: Version: contains acetone

Condition: used, Universal cleaner, 500 ml, NSF K1, spray can, Smart Straw™, WD-40 SPECIALIST · Fast-acting solvent-based cleaner · Removes grease, oil, dirt, and grime without leaving any residue · Suitable for metals, range hoods, and flooring (check material compatibility beforehand) · Works instantly on contact Iedpfx Agez U Tmio Astn · Easy to wipe off · Leaves no residue · Operating temperature range: room temperature · NSF K1 registered (Reg. No. 145373) · Other technical properties: Color: colorless